DTZY1122 Three Phase Four Wire Multi-function Electronic Smart Meter brings many enhancements that support emerging needs of smart grid initiatives, such as enhanced memory, greater security, and remote upgrade ability. Developed with technology and communications flexibility in mind, DDZY1122 platform is both a smart metering element that supports RS485, PLCor low-power RF modules. The meter's modular design provides a cost effective solution for many metering applications. Functions and Characteristics Three phase active(reactive) power consumption measurement at different time segment Display: Large LCD display Record, display and store the total active/reactive power consumption and multi rate power consumption during latest 3months. Measurement of maximum demand and billing Two time zones, four rates, ten time periods. Event record of voltage/current missing, programming, demand clearance, etc. Real time data: Time, voltage and current Self verifying and monitoring of power supply, power Network, operation situation of meter. The function setting, programming and reading (concentrated reading possible) can be realized via infrared and RS-485 ports.
Single Phase DIN-Rail Energy Meter (DDS-1Y-L) Executive Standard: IEC62052-11 2003; IEC62053-21 2003 and IEC62056-21(IEC1107) DIN-rail standard: "SO"43864. Function and characteristic: Single measurement(optional RS485 or RS485 Modbus) High accuracy of measure, convenient installation; Logical design of Anti-creep. Technical data: Rated voltage: 110V, 120V, 220V, 230V Rated Current: 1.5(6)A, 5(60)A, 10(100)A Frequency: 50-60Hz Connection mode: CT type; Direct type Display mode: LCD 5+2 = 99999.99kWh Accuracy Class: 1.0 Power consumption: 1W (when 220V 20A) Start current: 0.004Ib Constant: 12800 imp/kWh; 800/1600/3200/6400 imp/kWh Standard work temperature: -20-45 degree Climate work temperature: -30-55 degree Relative humidity: 85%. Size: 100*76*65 mm.
DIN-Rail Single Phase Energy Meter with Counter(DDS-1Y-M) Executive Standard: IEC62052-11 2003; IEC62053-21 2003 DIN-rail standard: "SO"43864. Function and characteristic: Long terminal block; Nameplate inside; Measure power accurately; Anti-creep. Technical Data: Rated voltage: 110V, 220V, 230V, 240V; Rated current: 5(30)A, 5(60)A, 10(80)A, 5(80)A; Frequency: 50-60Hz Connection mode: Direct type Display: Counter 6+1=999999.9kWh Accuracy Class: 1.0 Power consumption: Un1W (when 220V 20A) Start current: 0.004Ib Standard work temperature: -20-45degree. Crelative humidity: 85%. Size: 115*78*65mm.
Three Phase Double Tariff Meter (DTS353) Executive Standard: IEC62052-11 2003; IEC62053-21 2003 DIN-rail standard: "SO"43864. Function and characteristic: Two tariffs; Double LCD; Control tariff by exterior controller; Two display window for two different tariffs T1, T2. Technical data: Rated Voltage: 3*220V/380V; 3*230V/400V Rated Current: 3*5(30)A; 3*10(60)A; 3*10(100)A Frequency: 50-60Hz Connection Mode: Direct type Display: LCD 5+1=99999.9kWh Accuracy Class: 1.0; Power Consumption: Less than 0.6W; Less than 0.3VA Start current: 0.004Ib Constant: 800/1600/3200/6400imp/kWh. Size: 122*100*65mm.
Single Phase kWh Meter Executive Standard: IEC62052-11 2003; IEC62053-21 2003 Function and characteristic: Infrared function; Measurement accurately. Technical data: Rated current: 1.5(6)A 5(30)A 10(40)A 5(60)A 20(80)A Rated voltage: 110V 220V 230V 240V Display mode: LCD 6+1=999999.9kWh Accuracy class: 1.0 Frequency: 50Hz (60Hz) Impulse constant: 800/1600imp/kWh Connetion mode: CT type; Direct type. Size: 153*118*50mm.
A eucalyptus is an industrial tree which is grown for logging and creating shade. The tree is about 5 to 6 years old with a height of over 7 meters and a trunk diameter of about 9 to 10 meters. Small elongated leaves. Eucalyptus wood is used to make paper or charcoal production (white charcoal, black charcoal). People often use branches and young trees used to produce charcoal. Specification of Solid EUCALYPTUS charcoal Moisture content: 2.1% Ash content: 4.53% Volatile matter content: 28.35% Fixed carbon content: 67.12% Calorific value: 6892 kcal/kg Burning time: 3 - 3.5 hours Dimension of Solid EUCALYPTUS charcoal Shape: Solid stick Diameter: 3-8 cm Length: cut as customer's request (15-20 cm)
Features and benefits Range up to 8m/12m 6 mm range accuracy Easy remote operation, diagnosis and adjustment with KEY/LCD or PC Low processing power Capable 2-wire, loop powered, intrinsically safe inner temperature compensation to ensure accuracy of measurement Non-contact measurement Easy mounting via 1¿÷ NPT Low cost Application Continuous, non-contact level measurement in fluids, pastes, sullies and coarse bulk materials Characteristics Measuring Range Solids applications: 4m/6m (transducer dependent) Liquid applications: 8m/10m (transducer dependent) Measuring Resolution 2mm Accuracy 0.25% of range or 6mm, whichever is greater Max. Pulse Frequency 43.5KHz Operating Temperature -20..+80í+ Operating Pressure 0.7..3 mbar Power Supply 15..30V Power Consumption 51 mW ... 800 mW PCB Size Driver board(Ñ+:84mm), Main CTL board(Ñ+:80mm) PCB Material FR4 LCD Size 128*64dot Description ANL-4012 Ultrasonic Level Measurement Instruments use sound waves to determine level. A piezoelectric crystal inside the transducer mounted on top of the tank converts electrical pulses into sound energy that travels in the form of a wave at the established frequency and at a constant speed in a given medium. The sound waves are emitted in bursts and received back at the transducer as echoes. The Ultrasonic Level Measurement Instrument measures the time for the bursts to travel down to the reflecting surface and return. This time will be proportional to the distance from the transducer to the surface and can be used to determine the level in the tank. Ultrasonic systems are accurate within a range of approximately 8m. A typical installation consists of two parts: A Transducer, consisting of both a transmitter and receiver. Ultrasonic energy is transmitted from the í¦headí¦ in the direction of the liquid surface. When the ultrasonic waves contact the surface, they are reflected back to the receiver in the head. Electronics, which produce, control and time the ultrasonic pulses which are transmitted and received by the head. The electronics also transmit control signals to remote monitoring devices such as displays and process control systems.
Measuring range 4 - 52 cf 0.4 - 5.2 ec 280 - 3640 ppm 4 - 44 cf 0.4 - 4.4 ec 280 - 3080 ppm Resolution 1 cf unit (0.1 ec) Accuracy 4% Temp 5 - 50c (atc) 64x38x20cm/100pcs, 13kg
Type: dds-1y-18m Current: 5(32)a, 5(40)a, 5(45)a, 5(50)a Voltage: 110v; 220v; 230v; 240v Accuracy: 1.0; 2.0 Constant: 1000imp/kwh Frequency: 50/60hz Connection mode: direct type;external ct type Display mode: counter 5+1 = 99999.9kwh Power consumption: n0.4w; n8va Start current: 0.004ib Din-rail standard: so43864 Executive standard: gb/t17215-2002; iec61036 120pcs/ctn. Carton size:50.2*40.5*19.5
CARACTERISTIQUES DES COFFRETS Coffrets pour kit monophas
DDSY1598 Compteur d'nergie de paiement anticip de clavier BS monophas La description
Dm72c wifi co2 meter.
DDS-1702 Portable Conductivity Meter is an instrument used for the measurement of the conductivity of aqueous solution in the laboratory. It is widely used in petrochemical industry, bio-medicine, sewage treatment, environmental monitoring, mining and smelting and other industries as well as junior college institutions and research institutes. If equipped with conductivity electrode with the appropriate constant, it can also be used to measure the conductivity of pure water or ultra-pure water in electronic semiconductor or nuclear power industry and power plants.
PHS-1701 Portable pH Meter PHS-1701 portable pH meter is a digital display PH meter, with LCD digital display, which can display PH and temperature values simultaneously. The instrument applies to the labs in junior college institutions, research institutes, environmental monitoring, industrial and mining enterprises and other departments or field sampling to determine the aqueous solutions PH values and potential (mV) values. Equipped with ORP electrode, it can measure the solutions ORP (oxidation-reduction potential) value; equipped with the ion specific electrode, it can measure the electrode potential value of the electrode.
DOS-1703 Portable Dissolved Oxygen Meter DOS-1703 portable dissolved oxygen meter is outstanding for ultra-low power microcontroller measurement and control, low power consumption, high reliability, intelligent measurement, using polarographic measurements, without changing the oxygen membrane. Having reliable, easy (one-hand operation) operation, etc.; the instrument can display dissolved oxygen concentration in two kinds of measurement results indicates, mg / L (ppm) and the oxygen saturation percentage (% ), in addition, measure the temperature of the measured medium simultaneously.
TDS/Conductivity /pH meters packet type, Single parameter and multi-parameters TDS - Range : 0.00 - 9999 mg/L Conductivity : Range : 0.00 - 9999 muS pH : 0.0 - 14 Multi-Parameters TDS/COND/pH/TEMP all in one Made in EU
Online pH meter Features: 96 x 96 mm smart pH/ORP transmitter Waterproof design, suitable for panel mounting Large LCM display with Chinese and English, backlight switchable Easy to operate with graph-text menu and procedure instruction Time washing function with programmable time interval Provide solution grounding function to eliminate electricity disturbance on sample Automatic calibration; automatic/manual temperature compensation If you are interested in our products, please contact us.
Dissolved oxygen meter Features: 144 x 144 mm microprocessor D.O. transmitter Waterproof design, suitable for wall/panel/pipe mounting Large LCD to display working status Time washing function with programmable time interval Compatible with Hamilton, BJC and Mettler Toledo membrane sensors Automatic temperature compensation, pressure and salinity manual adjustment Combination keys to access Setting and Calibration mode to improve parameter protection "If you want to know about environmental protection equipment, please confirm it in Qilee Li. Qileegroup.com is a high-tech environmental protection enterprise which integrates comprehensive supply of environmental protection products and related technical services. Qilee has summarized the trade clues in this field, and our ultimate goal is to use these clues through our online tools to benefit both buyers and sellers of mechanical parts.
The RBBF Clamp-on Ultrasonic Flow Meter is a fixed-mount, low cost transit-time ultrasonic flow meter with clamp-on transducers for non-invasive liquid flow rate measurement. Our microprocessor-based, user friendly field programmable creates no interruption of the process flow and has low installation costs. This versatile series of flow meters is available in a variety of configurations. Available transducer types include clamp-on, in-line, and insertion. Wall-mount, panel-mount, pipe-mounted and compact din-rail mounted display types are also offered. Additional available features include pulse, 0-20mA & 4-20mA outputs, RS-232 communication, user-selectable engineering units, and a data logger function.
We can also provide the following products: Burkert flow transmitter Gf signet flow transmitter Foxboro flow transmitter Yokogawa flow transmitter Honeywell flow transmitter Coriolis flow transmitter Rosemount flow transmitter Siemens flow transmitter -
