Features : Compact & Light weight Fully Automatic Operation 5000m altitude ensures Splice Quality SYSTEM TEST ensures the best working condition Color LCD monitor Pause function, convenient for scientific research Store 8000 groups of splice results USB&DC interface High battery capacity, up to 260 times of continuous splice and heat Specifications: Applicable Fibers SM, MM, DS, NZDS, G655,G657 and others Fiber Diameter Cladding Diameter: 80-150 um; Coating Diameter: 100~1000 um Fiber Cleaved Length 8-22mm Typical Splicing Time 8 seconds Tube Heating Time 30 seconds Splice Loss MM: 0.01dB; SM: 0.02dB; DS: 0.04dB; NZDS: 0.04dB Return Loss 60dB Tension Test 2.0N Sleeve Length 25mm, 40mm, 50mm Splicing Program Automatic Setting Storage Memory 10000 Language English, Chinese Alignment Core Alignment(PAS Technology) Splice method Arc splicing Fiber holder Replaceable and Suitable for the Splice of bare fiber ,pigtail ,patch cord, optical fiber drop cable and SC,FC,LC connector Interface USB, suitable for data download and software update Electrode Span At least 5000 times Operating Temp. -18°C~50°C Storage Temp. -40°C~80°C Operating Altitude 0~5,000m Humidity 0~95%RH Wind Protection max. wind velocity of 15m/s Power Supply AC adaptor: 85~260V input voltage; internal battery: 12V & 10A; DC adaptor: 12V/2A Power for external heater, light or hot jacket stripper Battery Capacity up to 200 times of splices and heats Dimension 122(D)*122(W)*130(H)mm Weight 1.8kg(Include battery) BD-FS-40 Fully Automatic Operation Fiber Optic Fusion Splicer
Product name 62S Plus Fusion Splicer Model No. 62S Plus+ WITH CT-08 Dimensions 46 W x 159 D x 150 H (mm) Cladding Diameter 80 to 150 microm Power Supply 100 to 240 V AC Wind Protection Maximum wind velocity of 15 m/s (34 mph) Weight 2.5 Kg Coating Diameter 100 to 1000 microm Fiber Cleave Length 5 to 16 mm Splicing Modes 100 preset and user programmable modes Product Keywords Traditional Core Alignment with the 62S+ Fiber Splicer
Splicing Type SM, MM, DS, NZDS Splicing Loss 0.02dB(SM) 0.01dB(MM) 0.04dB(DS) 0.04dB(NZDS) Return Loss >60dB Splicing Mode Manual, Half Auto, Auto Fiber Alignment Core to Core Alignment by PAS technology Applicable Fiber Cable indoor and 0.25mm,0.9mm fiber, SOC connector(option) Splicing Time 9s Heat Time 30s Auto Heat Cleaved Length 8-16mm Fiber Image/ Magnification 300/150 times View Display 4.3 inch digital high-quality LCD screen Tension Test Standard 2N (option) Heat Shrinkable Sleeve 60mm, 40mm and serials heat Shrinkable Sleeve Battery Capacity 300 cycles splicing and heating, 3 hours charging time ( splicing and charging at same time)" Battery Life Cycling charge 300-500 times, easy to replace battery Electrodes Life 3000 splicing, easy to replace electrodes Power Source 20W Interface USB Convenient data download and software update Construction Lighting Built in high brightness, wide range of lights, easy to operate at night Power supply Built in lithium battery 5200mAh 11.1V; external adapter, input: AC100-240V, output: DC13.5V/4.5A" Operating Condition 0-5000m above sea level, Temperature: -10-60, Humidity 0 95%RH (No dew)" Weight 1.7 KG (including battery) Dimension (LxWxH) 150mm(L) 135mm(W) 142mm(H)
1)Suitable for 0.25mm bare fiber, 0.9mm buffered fiber, Splice on Connector, Flat FTTH Fiber Cable(Drop Cable),Clamp Change Free(The First, Unique in the world) 2) Button and Menu is same as FSM-60S, in accord with the habit of usage 3) One Step Fiber Cleaver with Automatic Blade Rotation(The First, Unique in China)
Sumitomo Type-39 Type-66 Type-81C Type-25eS Type-25E Type-45S Type-46S Type-46M Fusion Splicer Optical Fiber Electrode Rod ER-10 low splicing loss splicing more than 4000 arcs Material tungsten alloy Small size good quality
Fusion Splicer TCW-605E of Techwin for construction and maintenance of fiber and cable We will try our best to provide products similar to Fujikura Fusion Splicer, Sumitomo Fusion Splicer, FITEL Fusion Splicer, INNO Fusion Splicer, ILSINTECH Fusion Splicer, FiberFox Fusion Splicer. How About This Product? The TCW-605E Series adopt high-speed image processing technology and special precision- positioning technology, automatically finish the whole process of fiber fusion in 8 seconds typically, TFT LCD monitor displays all steps of fiber fusion clear at a glance. The Uses: 1.The TCW605E Series Fusion Splicer have been using in English, Spanish, Portuguese, French, Italian, German, Arabic, Russian, Korea, Japanese, etc. 2.Widely used for SM and MM Quartz Fiber with diameter 80-150m(300m optional), coating layer diameter 0.1-1.0mm and bare fiber length 16mm more or less. 3.Ideal tools for construction and maintenance of fiber and cable in both field and laboratory applications. Detailed Introduction: 1.Not only a Fusion Splicer, but also your partner who make your job easy and happy 2.5.0 inch TFT color LCD monitor with anti-reflective coating 3.The advanced core to core fiber profile alignment system(PAS) 4.ARC Calibration FREE system. ARC Calibration sub-menu included in the Menu too, can do the ARC Calibration by Manual when necessary Technical Specifications: 1.Average Splicing Loss : 0.02dB with G.652 and G.657, 0.01dB with G.651 and 0.04dB with G.653 and G.655 2.Splicing Time : Typical splicing time:8s 3.Heating Time : Typical heating time:30s 4.Return Loss : 60dB or greater 5.Fiber Coating : 100m to 1000m 6.Fiber Cladding : 80m to 150m(300m optional)
Fusion splicer is used for joining two optical fibers end-to-end using heat, to fuse the two fibers together in such a way that light passing through the fibers is not scattered or reflected back by the splice and so that the splice and the region surrounding it are almost as strong as the virgin fiber itself. We has been dedicated to R & D, manufacturing fusion splicer from 2010, and successfully obtained 5 patents for the fusion slicer research. Uniway UW-65H is our latest developed product. It is more concise and smaller in size and has obtained 2 patents for its new technologies. Specification Applicable Fibers: SM, MM, NZ-DS, EDF, Pigtail, Cable (rubber-insulated wire), SC/LC/FC connector (optional function) Average Splice: Loss 0.02dB(SM), 0.01dB(MM), 0.04dB(NZDS), 0.04dB(EDF) Return Loss: â?¥60dB Tension Test: 2.0N(200gf)(Standard) Typical splicing time: 10 seconds Typical heating time: 30 seconds Splicing Program: 50 groups Protection Sleeve: 20mm, 40mm, 60mm Operating Language: English Operating Conditions: -10~+50�°C(operation temperature),0~95% RH(humidity), 0~5000m(altitude) Electrode Life; More than 3500 splices Power Supply: AC adaptor: 100~240V input voltage, 50/60Hz; 12V, 5A output voltage(DC) Inner lithium battery: 11.1V, 6AH for up to 200 splices with heating Monitor: 5 inches high resolution colorful LCD display Fiber Image: X or Y axis Separately views 400 times magnification, or Simultaneously 300 times Storage of Splice Result 6,000 groups of latest splice results Splicing Model: Auto & Manual &Full Auto Dimensions: 130(W)*135(D)*130(H)mm; Package size: 53*32*30cm Weight: 2.21kg+0.37kg (battery weight)=2.58kg; Package G.W.: 8.68kg
DecFuse DEC36 Fusion Splicer -Equal to Fujikura 60s, Sumitomo 39 -CE -8s splicing -Fiber cleaver included -Type:Optical Fiber Fusion Splicing Machine Features -High-resolution true color 5.7 inch LCD display -advanced core to core fiber profile alignment system(PAS) -Real time calibrating system ,parameter neednt be adjusted -X/Y axes were displayed meanwhile, Magnification up to 304 times -8 seconds splicing time, 30 seconds Heat-Shrinking -Battery capacity was display in real time, precisely -Built-in high capacity battery, support 220 times splicing and heating, to meet one days work -Long Electrode Lifetime, up to 4000 times -The new wind-cover design, enhance the ability to prevent the dust & wind, Max. wind velocity of 15m/s -Three Splicing modes: auto, half-auto, manual -Built-in super high-brightness LED supply convenience for night work -Auto calculate splicing loss -Small bulk and light weight, only 2.8kg include battery -4000 results Storage -USB data interface &VGA -One button operation to finish results download or software update -Close shield splice automatically, Close heater lid heat automatically -One year Warranty Why Purchase from us 1. Equal to Fujikura FSM-60s, Sumitomo Type-39 2. First Manufacture in China 3. Fastest splicing (8 second) in the world 4. One year warranty 5. 3 days delivery + low shipping cost by air Standard Export Carton. G.W/N.W: 8.0/7.0kg, L x W x H :465mmx350mmx360mm
SimSplice™ Digital Fusion Splicer T35 Fujikura FSM-50S AnalogueGet rid of complicated functions. Easy battle Description: The Fiber Splicing Machine T35 Series have a new fully-digital design, core to core alignment, Standard accessories. Multiple language menu, 5.0 inch digital high definition LCD display, 9 Sec. splice time, 35 Sec. Tube-heat time.. Features: • The advanced core to core fiber profile alignment system • X/Y axes were displayed meanwhile, Magnification up to 304 times • 9 Sec. splice time , 35 Sec. tube-heat time • Hig High-resolution true color 5.0 inch LCD display • Four display modes, fiber core visible • Store 6000 groups of splice results • Four display modes, fiber core visible • USB interface - for updates + result transfers • Built-in high capacity battery, support 220 times splicing and heating, to meet one days’ work • Long Electrode Lifetime, up to 4000 times • Three Splicing modes: auto, half-auto, manual • Close shield splice automatically, Close heater lid heat automatically • One year Warranty. Standard Package: • T35 Fusion Splicer • T30 High Precision Fiber Cleaver • Miller CFS-2 Fiber Coat Stripper • Internal Battery • Charger, AC Power Cord • Spare Electrodes (one pair) • Cooling Tray, Alcohol Pump Bottle, Blower Brush • User Manual • Carrying Case.
Fusion splicer pt-630 Features Fiber core can be display clearly Singlex or y view and x & y view simultaneously Auto check quality of cleaved end face Auto select best splicing program 9 seconds splice time and 30 seconds heat time Small bulk and light weigh 5 inch color lcd monitor with clear digital image display Simple operation menu Software upgrade via usb interface Specification Model Pt-630 Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655) Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬ 16mmú¿coating diameter: 250 ~ 1000ª8mú¬ Fiber diameter Cladding diameterú¦80 ~150ª8m Coating diameterú¦100~ 1000ª8m Fiber count Single Fiber aligning method Core aligning Image processing method Digital Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm), 0.04db (ds), 0.04db( nzds) Splicing time Typical 9 secú¼with standard sm fiber Splicing mode 53(templet), 40(user) Splice loss estimate More accurate Return loss ú+60db Storage of splice result 5000 resultsú¼3 parameter per result Fiber display and magnification 400xú¿x or y viewú¬, 200xú¿x and y viewú¬ Tube heating time Typical 30 sec Tube heating mode 9(templet), 24(user) Tube heating temperature Can be adjusted Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves Tension test 2n Electrode life 2500 No.Of splice/heating with battery Typical 130 cycles (splice/tube heat) with inner li-battery Display screen 5 inch color lcd monitor Image change over The fiber image is turned upside down Terminals Rs 232 Operating condition 0 ~ 5000m above sea level, 0 ~ 95%rh and -10í½50íµ, respectively, max. Wind velocity of 15m/s Power supply Ac 100-240v with ac adapter; inner li-battery(6600mah) Dimensions 150mm(l) x150mm (w) x150mm (h) Weight 2.7 kg excluding battery, 3.2 kg including battery
Fusion splicer pt-650 Features Equel to fujikura fsm-50s, sumitomo type-37 etc Core to core alignment by pas technology ( pas:profile alignment system) Digital fusion splicer with automatic focus function Fiber core can be display clearly Single x or y view and x & y view simultaneously Auto detect cleaved endface fault Display fiber cleaved and offset angle Display core and clad offset 5.6 inch tft color lcd monitor with clear digital image display Usb & vga interface Software upgrade via usb interfac Specefication Model Pt-650 Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655) Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬ 16mmú¿coating diameter: 250 ~ 1000ª8mú¬ Fiber diameter Cladding diameterú¦80 ~150ª8m Coating diameterú¦100~ 1000ª8m Fiber count Single Fiber aligning method Core or clad aligning Image processing method Digital Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm), 0.04db (ds), 0.04db( nzds) Splicing time Typical 9 secú¼with standard sm fiber Splicing mode 53(templet), 40(user) Splice loss estimate More accurate Return loss ú+60db Storage of splice result 4000 resultsú¼20 parameter per result Fiber display and magnification 300xú¿x or y viewú¬, 150xú¿x and y viewú¬ Tube heating time Typical 30 sec Tube heating mode 9(templet), 24(user) Tube heating temperature Can be adjusted Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves Tension test 2n Electrode life 2500
Fusion splicer pt-660 Features Color lcd monitor and 256x magnification Compact and lightweight Reversible monitor with control panel on each side Maximum wind velocity: 15m/s 8sec splice time, 40sec tube-heat time Simultaneous x and y views Large capacity internal battery System test: ensures the best working condition User programmable Auto check fiber end face Auto calibrate parameters Store 8, 000 groups of splice results Multiple language options Specification Model Pt-660 Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655) Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬ 16mmú¿coating diameter: 250 ~ 1000ª8mú¬ Fiber diameter Cladding diameterú¦80 ~150ª8m Coating diameterú¦100~ 1000ª8m Fiber count Single Fiber aligning method Core or clad aligning Image processing method Digital Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm), 0.04db (ds), 0.04db( nzds) Splicing time Typical 8 secú¼with standard sm fiber Splicing mode 53(templet), 40(user) Splice loss estimate More accurate Return loss ú+60db Storage of splice result 4000 resultsú¼20 parameter per result Fiber display and magnification 300xú¿x or y viewú¬, 150xú¿x and y viewú¬ Tube heating time Typical 30 sec Tube heating mode 8(templet), 24(user) Tube heating temperature Can be adjusted Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves Tension test 2n Electrode life 2500 No.Of splice/heating with battery Typical 150 cycles (splice/tube heat) with inner li-battery Display screen 5 inch color lcd monitor Image change over The fiber image is turned upside down Terminals Usb 1.1 and vga Operating condition 0 ~ 5000m above sea level, 0 ~ 95%rh and -10í½50íµ, respectively, max. Wind velocity of 15m/s Power supply Ac 100-240v with ac adapter; inner li-battery(6600mah) Dimensions 170mm(l) x170mm (w) x140mm (h) Weight 2.7 kg excluding battery, 3.3 kg including battery
Features: *Digital Color display *Simultaneous X and Y views *9 Sec.splice time,40 Sec.tube-heat time *Large capacity internal battery *SYSTEM TEST ensures the best working condition *User programmable *Auto check fiber end face *Auto calibrate parameters *Store 8000 groups of splice results *Multiple language options Specifications: Applicable fibers: SM,MM,DS,NZ-DS,EDF; Cladding diameter:100 to 150um; Coating diameter:100 to 1000um; Fiber cleaved length:8~22mm(standard); Splicing mode:Auto&Manual; Average splice loss:0.02dB(SM),0.01dB(MM),0.04dB(DS),0.04dB(NZDS); Return loss:í¦ 60dB; Environment conditions:-25~50íµ(operation temperature),0~95% RH (humidity),0~5000m (altitude); Storage environment:-40~80íµ(temperature),0~95%RH(humidity); Protection sleeve length:20mm,40mm,60mm; Tension test:2.0N (Standard); Language: English,Chinese,Korea,Russian,Spanish etc; Interface:RS232 interface&video output;AC adaptor:85~260V input voltage; Power supply:Internal battery:12V voltage,10Ah, up to 200 times of continuous splices and heats;DC adaptor:12V voltage,optional multipurpose external battery; Dimensions:160(W)í-160(H)í-180(D)mm; Weight:4.2kg; Standard carton
Key Features: 1)Seamless Splicing from Trunk to FTTx 2)Most compact, lightweight core-alignment splicer in the industry! 3)New graphical user interface (GUI) to enhance ease-of-use. 4)Transreflective LCD allows clear view even in direct sunlight. 5)Best-in-industry fiber magnification - 608X. 6)Built-in battery automatically charges when plugged into AC - even when splicing!
With its super low profile and new user interface, the Fitel S122 series fusion splicer offers next generation workability for every splicing field, FTTX, LAN, backbone, or long-haul installations. Combining the portability, power flexibility and field ruggedness of FITEL's previous generation of hand-held splicers with the proven quality and performance of our ribbon splicers, the S122 delivers fast and consistent splicing with outstanding mobility and extreme ease-of-use.
DVP- 720B Single Fiber Fusion Splicer Features Digital Color display Simultaneous X and Y views 9 Sec. splice time, 40 Sec. tube-heat time Large capacity internal battery SYSTEM TEST ensures the best working condition User programmable Auto check fiber end face Auto calibrate parameters Store 8000 groups of splice results Multiple language options Specifications Applicable fibers SMíóMMíóDSíóNZ-DSíóEDF Cladding diameter 100 to 150um Coating diameter 100 to 1000um Fiber cleaved length 16mm (standard) Splicing mode Auto & Manual Average splice loss 0.02dB(SM)íó0.01dB(MM)íó0.04dB(DS)íó0.04dB(NZDS) Return loss í¦ 60dB Environment conditions -25í½ú½50íµ (operation temperature), 0í½95%RH (humidity), 0í½4000m (altitude) Storage environment -40í½ +80íµ (temperature) , 0í½95úÑRH (humidity) Protection sleeve length 20mm íó40mm íó60mm Tension test 2.0N (Standard) Language English, Chinese, Korea, Russian, Spanish etc. Interface RS232 interface & video output Power supply AC adaptorú¦ 85í½260V input voltage Internal batteryú¦12V voltage, 10Ah, up to 150 times of continuous splices and heats DC adaptorú¦12V voltageú¼optional multipurpose external battery Dimensions 160ú¿Wú¬í-160ú¿Hú¬í-180ú¿Dú¬mm Weight 4.2kg standard carton
S177A S177-X-A-0001 Splicer Body 12kg
Both X and Y axis display Large multiple & visible fiber core Turn-over display screen to use conveniently Inner light to set fiber at night Auto check end-face of fiber Auto calculate splicing loss Auto select suitable fusion program Small bulk and light weight & alternating /Direct Current available Screen menu for simple operation Concave weatherproof cover & Max. wind velocity of 15m/s
Meets ansi/aami standards Made of pe foam. With hypoallergenic acrylic adhsive Available in both solid gel and liquid gel variants in different shapes and sizes 50 electrodes in a pouch. 40 pouches (2000 electrodes) in a shipper carton.
Carbon Electrode Paste / Soderberg Electrode Paste Quality Specification: At the customers end the paste is fed in the upper part of the electrode it softens and melts forming the shape of the electrode casting. Flow ability of carbon electrode paste is essential for proper operation of electrode. It is important that the paste flows at a reasonable temperature and fills the casting of the electrode, maintaining a consistent mixture of components. The paste then gets baked to a solid mass as it moves down and is capable of passing the required current to the furnace charge. The plasticity of paste , the measure of its flow ability is controlled in the mixer by adjusting the binder content or percentage of coke fines. The lower baked part of the electrode is the final electrode product. The physical properties of this paste are of vital importance to ensure proper electrode operation without breakages. Green paste: A) Plasticity : 30-35%, 35-40% (or as per buyers requirement ) B) V.M. : 12-14% C) ash : 0.5% max D) f.C. : 86% min E) Apparent density : 1.58gm/ccmin. Baked paste : A) f.C. : 99% min B) porosity : 22-24% C) Apparent density : 1.36gm/cc min D) ccs : 250kg/cm2 min E) electrical resistivity : 70-90 micro ohm meter. Size : mould of 24ö dia & 4ö thick (wt. Approx 46kg. To 48 kg. Per block). 24" dia & 4"thick approx 46 to 48 per block. Size in briquette form or as per buyers requirement can also be made available.
