Battery Type:Lithium Iron Phosphate Battery Pack Nominal Voltage:51.2V Nominal Capacity:100Ah Charge Cut-Off Voltgae:58.4V Discharge Cut-Off Voltage:40.0V Standard Charge Current:0.5C Max Charge Current 1.0C Max Continuous Discharge Current 150.0A Peak Discharge Current 300.0A(3000 @80% DOD, 0.5C Dimension 483*385*222mm/Customize Weight About 51.8kg Communication RS232/485 PCM Protection of over charge/discharge, over current, short circuit etc......
Battery type:12v 100ah Lifepo4 Pouch Charge cut-off voltage:14.6V Power : 1.2KW Continuous discharge current: 100A Peak discharge current:250A (3S) Discharge cut-off voltage : 10V Cyclelife: over 2000 times at 80% DOD by stardard usage Charge temperature: 0-45 degree Discharge temperature: -10 to 60 degree Battery Weight:13.6KGS Max Size : L 330* W 173* H 217MM Protection : IP66
Type: Li-Ion Components: LFP Size: 323*171*213 Voltage: 12.8V Weight: 15.5kg Nominal Capacity: 100Ah Application: solar street lights, RVs,ups, solar street light Cycle life: 4000 Cycles Capacity: 2400Wh Peak discharge: 6000Wh Warranty: 5 years Waterproof: IP65 Battery weight: 15.5kg Lead acid battery replaced: 12v 200Ah Certificates: UN38.3 UL CE ROHS Battery type: Lifepo4
Type: 12v 100ah lifepo4 battery pack Components: Lifepo4 Size: 342*173*212mm(customized acceptable) Voltage: 12V Weight: 14kg Nominal Capacity: 100Ah Application: solar storge Product Name: lifepo4 lithium battery 12v 100ah lifepo4 battery pack Warranty: 12 months Cycle Life: 2000 times Assembling Battery Pack: Customized Others: BMS
Type: Li-Ion Components: LFP Size: 323*171*213 Voltage: 12.8V Weight: 15.5kg Nominal Capacity: 100Ah Application: solar street lights, RVs,ups, solar street light Cycle life: 4000 Cycles Capacity: 2400Wh Peak discharge: 6000Wh Warranty: 5 years Waterproof: IP65 Battery weight: 15.5kg Lead acid battery replaced: 12v 200Ah Certificates: UN38.3 UL CE ROHS Battery type: Lifepo4
Type: LiFePo4 Nominal Voltage: 12.8V Size: Pouch Nominal Capacity: 100Ah Application: solar srorage,UPS,EV certification: CE/UL Max discharge current: 100A Weight: 13.5KG Name: lifepo4 battery pack Max charge voltage: 14.6V Cutt-off discharge voltage: 8V Certificate: CE/RoHS/UN38.3/MSDS Dimension: 330*173*225mm
Electrical materials, electrical equipments, lighting fixtures, plumbing materials, ac materials, it materials, ceiling materials, partition materials, painting materials, floor tiles, hardware materials, hand tools & power tools, garage tools, wooden & carpenter materials, batteries. medical equipment and medical consumable product and medical surgical equipment..
1. sweeping and cleaning brushes/brooms series: road sweeper brushes / brooms with wafer brushes, gutter brooms, and roller brushes; industrial brushes with the staple set tufted cylinder brushes, rotary brushes, modular block brushes, strip brushes, and spiral wound roller brushes, etc. 2. solar generator series: solar panels, solar inverter, battery, solar energy storage systems, solar street light, solar lighting, solar air conditioner, solar benches, solar camera etc. 3. variety of magnets. 4. bearing tube, bundy tube, titanium tube, vehicle precision steel tub.Import and export services
ESS 215KW Lithium Battery Energy Storage System 384VDC Rechargeable Lifepo4 Battery pack 280AH Energy Storage Battery 1. High energy density, small footprint, short construction period, strong environmental adaptability 2. Standardized components, modular architecture, easy for expansion 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Efficient battery module and system cooling design 5. The use of international advanced IGBT and intelligent power module, with high power fast adjustment capability 6. BMS battery management system with SOC automatic calibration and high current active balance function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 7. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system 8. Our BMS use NXP(USA) automotive-grade high performance chip, strong anti-interference, good reliability, wide temperature range. 9. We use brand new high quality A-grade battery power cell, longer service life. 10. Charging and discharging are controlled separately, more convenient and reliable to control charging and discharging. 11. Big color LCD touch screen display, easy setting and operation. 12. Can built in solar charge controller and AC-DC charger, our BMS can intelligently manage charger to charge battery well, BMS can communicate well with battery, solar controller, ac charger and inverter, one integrated intelligent monitoring system. 13. Approved by UL1741 certificate. 14. Accept customized product, our lithium battery system are widely used in many situations, such as: Different residential home, hotel, shop, factory, hospital, commercial buildings, electric car, RVs, Van, mobile dining car, heavy truck, different ship/boats, ice-cream car, outdoor camper,.etc. Applications: 1.Energy Storage --Solar-Wind Power System / City Grid (On/Off) / Community and Family 2.Back-up System and UPS --Telcom Base / CATV system / Computer Server Center / Medical Instrumnt / Military Equipment 3.Other Applications --Security and Electronics / Mobile POS, Mining Lihgt / Torch / LED Light / Emergency Light --RV Motorhome /Golf Carts Battery / Boat Marine Yachts / Electric Skateboard / Electric bike / Electric Scooter / Electric bicycle --LED Backup / Engine Starting Battery,etc.
ESS 215KW Lithium Battery Energy Storage System 384VDC Rechargeable Lifepo4 Battery pack 280AH Energy Storage Battery 1. High energy density, small footprint, short construction period, strong environmental adaptability 2. Standardized components, modular architecture, easy for expansion 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Efficient battery module and system cooling design 5. The use of international advanced IGBT and intelligent power module, with high power fast adjustment capability 6. BMS battery management system with SOC automatic calibration and high current active balance function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 7. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system 8. Our BMS use NXP(USA) automotive-grade high performance chip, strong anti-interference, good reliability, wide temperature range. 9. We use brand new high quality A-grade battery power cell, longer service life. 10. Charging and discharging are controlled separately, more convenient and reliable to control charging and discharging. 11. Big color LCD touch screen display, easy setting and operation. 12. Can built in solar charge controller and AC-DC charger, our BMS can intelligently manage charger to charge battery well, BMS can communicate well with battery, solar controller, ac charger and inverter, one integrated intelligent monitoring system. 13. Approved by UL1741 certificate. 14. Accept customized product, our lithium battery system are widely used in many situations, such as: Different residential home, hotel, shop, factory, hospital, commercial buildings, electric car, RVs, Van, mobile dining car, heavy truck, different ship/boats, ice-cream car, outdoor camper,.etc. Applications: 1.Energy Storage --Solar-Wind Power System / City Grid (On/Off) / Community and Family 2.Back-up System and UPS --Telcom Base / CATV system / Computer Server Center / Medical Instrumnt / Military Equipment 3.Other Applications --Security and Electronics / Mobile POS, Mining Lihgt / Torch / LED Light / Emergency Light --RV Motorhome /Golf Carts Battery / Boat Marine Yachts / Electric Skateboard / Electric bike / Electric Scooter / Electric bicycle --LED Backup / Engine Starting Battery,etc.
Item No. PD100-12 Approx Dimension: 330x172x215mm Weight: 30kgs
Our All in one system 32KWH LiFePO4 Lithium Battery with AC Charger and 12-15KW 120/240V Inverter for mobile vehicle application ESS including LiFePO4 Lithium Battery with BMS, off grid pure sine wave inverter, AC/DC charger. This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications. Product advantages: All-in-one design, high integration and space saving installation Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable;
The wall mounted Lithium battery (LiFePO4 Battery) solutions are highly integrated, deep cycle backup power solutions for your solar home energy storage system. With rich experience and advanced techniques, the product has the features of the fashionable design, high energy, high power density, long service life, and easiness of installation and expansion. Custom capacity is acceptable. High cycle life 4000 cycles @80% DoD for effectively lower total of ownership cost. Longer service life Low maintenance batteries with stable chemistry. Built in circuit protection Battery Management System (BMS) is incorporated against abuse. Better storage Up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation. Quickly recharge Save time and increase productivity with less down time thanks to superior charge/discharge efficiency. Extreme heat tolerance Suitable for use in a wider range of applications where ambient temperature is unusually high: up to +60C. Lightweight Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent. Function Support parallel operation
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Zhuhai Angel Energy Technology Co., Ltd. is a professional manufacturer of Rechargeable Batteries. Major products:Solar Battery,Car Battery,Lithium ion Battery,Lithium Battery,Lithium Polymer Battery,LiFePo4 Battery,Battery Pack,Ni-MH Battery,Button Battery etc.Over 17 years of experiences in technology production,passed GB/T19001-2016/ISO9001:2015,SGS etc certificates,had utility model patent certificates and title of High-Tech enterprises.Daily production capacity:Li-Polymer batteries over 200,000PCS, Cylindrical batteries over 100,000PCS, ODM Battery Packs apporx. 3,000-10000PCS,it's one of China's Lithium Battery industry major suppliers. Most Rechargeable Batteries had passed UL,CE,CB,IEC62133,CQC,UL,PSE,KC,RoHS,UN38.3,MSDS etc certifications and test reports, widely used in Portable Printer,DVD, PDA, POS,Digital cameras,Electronic toys,Bluetooth Headset/Wireless Earphone,Beauty Machines,Medical Machines,5G Communication Base Station,PV Off-grid systems,Solar power systems,Solar rooftop,Utility Scale Solar,Solar Panels,Solar LED street light,Telecom Back-up,Hydro Energy,Car Jump Starters,Electric Golf Carts,Electric mower,Electric Scooter, Electric Bicycle etc Renewable Energy products.Can be provided a complete battery solution Program. Major Technique Parameters: 1)Normal Capacity: 100Ah 2)Min.Capacity: 100Ah 3)Normal Voltage: 12.8V 4)End of discharge Voltage: 9.0V 5)Maximum Continuous Discharge Current: 30C 6)Internal Resistance: 180m 7)Standard charge: 0.5C 8)Operation Temperature Range(Charge): 0-45C 9)Operation Temperature Range(Discharge): -20~60C 10)Dimensions FYI: 330x173x216m 327x170x213mm 145x100x490mm 179*159*305mm(with terminal) 11)N.W: about 10.6KG
Type: LiFePO4 Nominal Voltage: 12V Size: 520*269*203mm(Lenght*Width*Height) Nominal Capacity: 100Ah, 100Ah/OEM Discharge Cut-off Voltage: 9.2V Charging Cut-off Voltage: 14.6V max charge voltage: 15V max discharge current: 3C Weight: 28.5kg Housing Material: ABS+PC Application: UPS,medical equipment,solar system Cycle Life: >2000times Certificate: CE,UL,ROHS
The Dry Battery PTZ7L - 12V - 7Ah is a Valve Regulated Lead Acid sealed lead acid battery (referred to as VRLA) designed by AGM technology. AGM technology uses an Absorbed Glass Mat as a barrier; the electrolyte solution is absorbed at the plate, and the diaphragm is faster. Lead alloy composition and special additives suitable for starting purposes Advanced technology with an acid-free regulator valve, safe for users and vehicles. Outstanding advantages of the Dong Nai Maintenance-Free Dry Battery (VRLA) PTZ7A (12Vâ??7Ah) Specially designed for motorcycles. The most advanced technology for high performance, increased battery start-up, and service life Completely free of maintenance during use. Anti-shake design, suitable for all different terrain conditions.
The Dry Battery PTZ7L - 12V - 7Ah is a Valve Regulated Lead Acid sealed lead acid battery (referred to as VRLA) designed by AGM technology. AGM technology uses an Absorbed Glass Mat as a barrier; the electrolyte solution is absorbed at the plate, and the diaphragm is faster. Lead alloy composition and special additives suitable for starting purposes Advanced technology with an acid-free regulator valve, safe for users and vehicles. Outstanding advantages of the Dong Nai Maintenance-Free Dry Battery (VRLA) PTZ7A (12Vâ??7Ah) Specially designed for motorcycles. The most advanced technology for high performance, increased battery start-up, and service life Completely free of maintenance during use. Anti-shake design, suitable for all different terrain conditions.