Monoblock Pumps
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
salient features
High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
- Mechanical seal is provided as per customers requirement
Specification
- Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP)
- Version : Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 65 Mtr.
- Maximum Flow Rate : 1450 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Stuffing Box
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80
100 X 80 and 100 X 100 (All size in mm)
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 mÃ?/sec (max.)
- Ph Value : 6.5 to 8.5
Material of construction - motor
Part Name Material
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminium
Monoblock pumps
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
Salient Features
High operating efficiency resulting in lower power consumption.
- Good suction lift characteristics.
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
specification
- Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP)
- Version : Three Phase, 380-415V, 50Hz AC Supply
- Speed : 1440 RPM
- Maximum Total Head : 12 Mtr.
- Maximum Flow Rate : 3160 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Stuffing Box
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Three Phase - Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150
(All size in mm)
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminum
Product Specification
Power Range : 1.0 HP to 2.0 HP
Operating Speed : 0 - 3100 RPM
DC Power Range : 900 Wp - 2000 Wp
DC Voltage Range : 70 Vmp - 110 Vmp
Head Range : 30 Mtr - 90 Mtr
Discharge Range : 8000 LPD - 30000 LPD
Type of Duty : S1
- Zero Running Cost
- Less Maintenance
- Eco-Friendly
- Simple Installation
- Pollution Free
Material Of Construction - Motor
Part Grade
Mechanical Seal : Graphite Ceramic
Motor Shaft : Stainless Steel
Motor Body Pipe : SS-304
Lower Hosing : Aluminum
Diaphragm : High Nitrile butyl rubber
Top Cap : Stainless Steel
Bottom Plate : Stainless Steel
End Cap : Stainless Steel
MATERIAL OF CONSTRUCTION SCREW (HELICAL) PUMP
Part Grade
Outlet : SS-304
Suction : SS-304
Outer Shell : SS-304
Rotor Screw : Stainless Steel
Stator : Rubber Coated Alloy
MATERIAL OF CONSTRUCTION â?? CENTRIFUGAL PUMP
Part Grade
Check valve housing : SS-304
Check valve : PC
Suction : SS-304
Outer Shell : SS-304
Impeller : POM
Bowl : PC
Pump Bush : NBR
Pump Sleeve : Stainless Steel
Pump Shaft : Stainless Steel
Coupling / Pump Couple : Stainless Steel
Salient Features
Highly efficient 3-Phase Water Filled Motor
- 100% EC grade copper winding
- Easily Rewindable
- Motor Designed with Higher Cooling Effect Ensures Longer Life
- Sustainable uniform performance for years
- Ensures long life durability
- Optimized Hydraulic & Mechanical Design
- Improved efficient performance
- Excellent output in Low Radiation
- Dynamically balanced design
- Zero maintenance
Product Specification
Power Range : 3.0 HP to 10.0 HP
Operating Speed : 0 - 2890 RPM
Operating Frequency : 0 â?? 50 Hz
Input Solar DC Power Range : 3000 Wp, 10000 Wp
Input Solar DC Voltage Range : 330 Vmp , 600 Vmp
Head Range : 10 Mtr , 50 Mtr
Discharge Range : 126000 LPD , 425000 LPD
Type of Duty : S1
Material Of Construction
Part Grade
Oil Seal : Nitrile butyl rubber
Motor Shaft : SS - 420
Motor Body : Cast Iron / J4
Motor Bush : LTB-4 / Teflon
Thrust bearing assembly : SS - 420 & Carbon
Base : Cast Iron
Bracket : Cast Iron
Flange : Cast Iron
Casing : Cast Iron
Impeller : Cast Iron
Highly efficient 3-phase Air Cooled motor
- 100% EC grade copper winding
- Easily Rewindable
- Good suction lift characteristics
- Sustainable uniform performance for years
- Ensures long life durability
- Optimized Hydraulic & Mechanical Design
- Improved efficient performance
- Excellent output in Low Radiation
- Dynamically balanced design
- Double shielded ball bearings, so no need of external lubrication
- Mechanical seal or stuffing box is provided as per customers requirement
- Zero maintenance
Product Specification
Power Range : 1.0 HP to 10.0 HP
Operating Speed : 0 2890 RPM
Operating Frequency : 0 - 50 Hz
Input Solar DC Power Range : 900 Wp, 10000 Wp
Input Solar DC Voltage Range : 110 Vmp, 600 Vmp
Head Range : 10 Mtr, 50 Mtr
Discharge Range : 45000 LPD - 405000 LPD
Max. Suction Head : 7 Mtr
Type of Duty : S1
Material Of Construction
Part Grade
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminium
Falcon regenerative monoset pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
Salient Features
High operating efficiency resulting in lower power consumption.
- Good suction lift characteristics.
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
- All Model fitted to Mechanical seal.
specification
Power Range : 0.37 Kw - 0.75 Kw (0.5 HP - 1.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
- Speed : 1440 RPM
- Maximum Total Head : 18 Mtr.
- Maximum Flow Rate : 4200 LPH
- Maximum Suction Lift : 8 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Single Phase, Clockwise from driving end
- Nominal Pumpset Size (Suction X Delivery) : 25mm X 25mm
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
material Of construction - Motor
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : SS-410
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : Brass
Cooling Fan : Plastic
11 inch Impeller 19121-70-30 is used for 6x5x11 Mission Magnum Centrifugal Sand Pumps.
provides 19121-xx-30 impellers for Mission Magnum centrifugal pump 6x5x14:
19121-70-30 Impeller 6 x 5 11 inch
19121-80-30 Impeller 6 x 5 12 inch
19121-90-30 Impeller 6 x 5 13 inch
19121-A0-30 Impeller 6 x 5 14 inch
Fully open impeller, best design for the chemical process industries services. Ideally suited for corrosives and abrasives, handles solids and stringy fibers with ease. Allows for simple restoration of clearances when wear takes place. Back pump-out vanes reduce pressure on the shaft seal, reduce axial thrust on the bearings.
Part size cast into the impeller. This makes part identification easier.
Impeller gasket in included with impeller
All impellers are dynamically balanced
Offered Hard iron and other materials upon request
WFB series of seal-less self-control self-priming pump adopts no-leakage V-type seal assembly, eliminating the traditional pump packing seal, packing seal, mechanical seal, completely subdued the running, bubbling, dripping, leakingâ??, is to replace the original variety of long-shaft submerged pumps, submersible pumps, submersible pumps, etc. Ideal equipment. Disadvantages of the structure of the pump: First, downtime liquid leakage along the direction of the shaft outward, for frequent starting equipment is not very suitable for the occasion; Second, the power consumed by the secondary impeller is too large, the pump efficiency is low.WFB improved structure for the sealing device, one is to improve the efficiency of the pump, the second is to reduce the power of the motor, the third is to inhibit the leakage of the pump shutdown phenomenon. Sealing device in the movement process without friction, no wear and tear, the service life is more than 10 times longer than similar products. Transplantation of the vacuum pump principle, self-absorption performance is stable and reliable, in particular, the use of â??electric air control valveâ?? truly realised â??a diversion, life-long self-absorptionâ??. High efficiency, low vibration, low noise, flexible movement, easy disassembly, easy to install, no need for foot fixing, eliminating the difficulties of transporting, installing and maintaining the long-shaft submerged pump. With superior self-control function, it can be used with high-tech fields and highly automated series.
Omniscient International, an ISO & CE certified manufacturer, supplies Standard Size Brush Holders designed for reliable performance across a wide range of motors and generators. Manufactured using high-quality brass or stainless steel, with a golden or silver metallic finish, these holders ensure stable brush alignment, uniform pressure, and efficient current transfer. Suitable for AC/DC motors, industrial pumps, generators, and compressors, our standard brush holders are available in commonly used dimensions and mounting types. We also provide quick customization based on client specifications or machine models.
With the product name "SOFTOMNI 2000" is a proprietary formulated alkaline sizing agent. ALKYL KETENE DIMER (AKD) emulsion, designed to size the paper in the neutral to alkaline ph range of 6.5 to 8.5
SOFTOMNI is a free flowing white emulsion stable to size any type of furnishes preferably containing calcium carbonate.
Different type of furnishes require different application method and dosages.
SOFTOMNI 2000 is added as such (can be diluted with water to the maximum extent of 1:3 ratio) in the thick stock by diaphragm type of dosing pump.
Addition of SOFTOMNI 2000 before filler is preferable to get best sizing effect. The efficiency of ALKYL KETENE DIMER depends on the retention and drainage aid program.
The higher the drainage, first pass retention and first pass ash retention, optimum is the efficiency of AKD.
A cationic scavenger in necessary where there is high levels of anionic trash in the furnish like deinked pulp.
The biggest feature of deep well pump is to make the motor and pump into one, it is immersed in the groundwater well for pumping and conveying water, a kind of pump, which is widely used in farmland irrigation and drainage, industrial and mining enterprises, urban water supply and drainage and sewage treatment. As the motor is submerged in water at the same time, the structure requirements for the motor are more special than the general motor. The structure of the motor is divided into four types: dry type, semi-dry type, oil-filled type and wet type.
Before starting the pump, the suction pipe and the pump must be filled with liquid. After the pump is turned on, the impeller rotates at a high speed, and the liquid in it rotates with the vane, and under the action of centrifugal force, it flies away from the impeller and shoots outward, and the liquid shot out in the diffusion chamber of the pump casing slows down gradually, and the pressure increases gradually, and then it flows out from the outlet of the pump and the discharge pipe. At this time, in the centre of the vane as a result of the liquid is thrown to the surrounding and the formation of neither air nor liquid vacuum low-pressure area, the liquid in the pool of liquid pool under the action of atmospheric pressure, through the suction pipe into the pump, the liquid is so continuously from the pool of liquid is pumped up and continuously from the discharge pipe out.
TPR100RV series Vertical Centrifugal Sump Pump with rubber impeller is 100% same and interchangeable with 100RV-SPR rubber lining vertical slurry pump.
TPR100RV Vertical Sump Pump for Mining and Aggregate Slurries, it is also is designed to handle diverse uses including all rugged mining and industrial applications, always ensuring reliable performance and excellent wear endurance. 100RV vertical sump slurry pumps are mainly used in a variety of sump conditions, It can also be readily applied on floating dewatering or other floating pump platforms. Hard metal lined or fully rubber lined fitted.High capacity double suction semi-open impeller design, and suction agitator is also available.
We manufactured vertical pumps for the applications with low net positive suction head, cryogenic temperatures where vertical lift is required and in also in sump and cooling water services.
Our vertical pumps is specially designed for service in water, chemicals, sewage and slurries. Vertical pumps are cover a wide range of hydraulic condition to meet virtually every pumping service in the industry and optimum efficiency.
Pipeline centrifugal pumps are general-purpose equipment for conveying clear water and liquids with similar physical and chemical properties, widely used in industrial and urban water supply and drainage, high-rise building pressure boosting, fire-fighting systems, HVAC circulation and other fields [2]. According to the installation form can be divided into vertical and horizontal, according to the impeller structure is divided into closed, open and semi-open [1], the adaptable medium temperature range -20 â?? to 240 â?? [3], typical models include ISG, ISW, IRG, etc. [2] [4].
The equipment consists of impeller, pump body, sealing ring and other core components, the impeller rotates to generate centrifugal force to achieve liquid transport, the pump body plays a supporting role, and the sealing system to protect the operating vacuum. It adopts modular piping design, equipped with high-efficiency hydraulic model, supports electric drive and direct connection structure, featuring low noise, small footprint and easy maintenance. Installation requires precise calculation of suction height and ensuring pipeline sealing, and the performance curve reflects the relationship between flow rate, head and power [4]. Common faults such as air binding can be solved by filling water and exhausting air, and the bearings and sealing parts need to be overhauled regularly [2].
Impellers - wide variety of metallurgic and elastomeric options (metal and elastomer interchangeable) pump out vanes on rear and front (on closed impellers) reduce recirculation within pump, and aid in preventing seal contamination optional castings of straight or semi-Francis vanes (from 3 to 8 vanes on certain sizes) offer wider hydraulic options in single sizes.
Liners - wide variety of metallic and elastomeric options (metal and elastomer liners are interchangeable) to select from in order to provide the longest wear life possible.
Bearing assembly - Cartridge-style bearing housing allows for removal from pump and assembly in controlled environment, Oversized shaft diameters and reduced overhang in the wet-end contribute to long life and reliability in the field.
Seal arrangements - Expeller (Centrifugal Seal): no external sealing water required where applicable. Stuffing Box: flushed gland sealing with braided packing and a lantern ring. Mechanical Seals: advanced sealing technique without sealing leakage.
Frame Plate Liner Insert SP15041A05 is the main part of 150SV-SP Vertical Slurry Pump wet side. It works with the volute lining. The frame plate liner inserts and impellers are used to transport mud. And the frame plate has a replaceable wear-resistant metal lining plate or rubber lining plate.
are a professional slurry pump parts manufacturer, Slurry Pump spare parts are a maintenance requirement when operating slurry pumps, and can t be ignored. offer suitable replace spare parts for original slurry pump, including heavy duty slurry pumps AH (R), M (R), high head slurry pump HH, light duty slurry pump L (R), gravel pumps, vertical sump slurry pump, and froth pump. Tobee have different materials, such as high chrome pump parts, dual-phase steel slurry pump parts, slurry rubber pump spares, polyurethane pump spare parts, slurry pump ceramic sapres, etc.
Small submersible sewage pump is a kind of sewage treatment equipment with pump and motor connected design, submerged under liquid work, widely used in municipal engineering, industrial wastewater treatment and building drainage field. The equipment adopts vertical structure, with compact structure, low noise characteristics, can be directly installed in the sewage pool operation.
