A9500N is one of the smallest NB-IoT modules in LCC castellation packaging with the compact size of 24.0 Ã?? 26.0 Ã?? 2.3mm, ultra low power consumption and extended temperature range. Designed for use in NB-IoT network, A9500N enables connect to the Internet at DL and UL data speed up to 200kbps. In the area where NB-IoT service are not available, A9500N still enables reliable and secure data connect over EGPRS network. To save space on the application platform, A9500N comes as an extremely slim and compact module. This makes it ideally suited for a broad range of mobile computing devices, and particularly offers easy integration with AMI, Security, Intelligent Buildings and other M2M application. General features * NB-IoT Tri-bandB3/B5/B8 * EGPRS Dual-bandB5/B8 * Control via AT commands(GSM07.05,GSM07.07,V.25TER,GPRS, and enhanced AT commands) * Supply voltage range 3.1V-4.2V * Low Power consumption - eDRX mode:
Built-in temperature sensor Low or high level alerts programmable by user Sending sms alert message via gsm network Built-in gsm module 2 x ad channels input Report of data captured via sms Automatic schedule data capture and report via sms Receiving sms command 8 x alarm inputs 3 x relay outputs Low operating voltage alert message Program by either sms command or pc software Quad band gsm support It captures data via 1 x ad channels, 1 channel temperature sensor and reports to mobile phone by sms text. It is designed and integrated with a 16 bit mcu and reliable siemens gsm module. Application 1.Temperature monitoring in remote location, data centre or rural area 2.Remote industrial equipment monitoring 3.Rural equipment monitoring e.G. Power plant 4.Measuring equipment data capture and report via gsm.
Built-in temperature & humidity sensor Low or high level alerts programmable by user Sending sms alert message via gsm network Built-in gsm module 2 x ad channels input (temp & humidity) Report of data captured via sms Automatic schedule data capture and report via sms Receiving sms command 8 x alarm inputs 3 x relay outputs Low operating voltage alert message Program by either sms command or pc software Quad band gsm support. It captures data via 1 channel temperature and another channel humidity sensor and reports to mobile phone by sms text. It is designed and integrated with a 16 bit mcu and reliable siemens gsm module. Application 1. Temperature & humidity monitoring in remote location, data centre or rural area 2. Remote industrial equipment monitoring 3. Rural equipment monitoring e.G.. Power plant 4. Measuring equipment data capture and report via gsm.
EDAM-5019 16-ch Thermocouple Input Module with 2 iso. DI and 1 DO * Protocol USB2.0 TCP/IP, MODBUS RTU, MODBUS TCP ASCII Command * Support USB2.0, 10/100 Ethernet, RS485/232C, CAN (optional) * Support Thermocouple J, K, T, R, S, E, B, N, C Type * Support isolated input channels * Fully photo-isolation 3750Vrms � Wide supply voltages (10_30V) * Built-in TVS/ESD protection * Burn-out auto detection
Bluetooth ver. 2.0+edr certification Transmit power up to +18dbm(class1) Low current consumption: Hold, sniff, park, deep sleep mode 3.0v to 3.6v operation Full bluetooth data rate over uart and usb Support up to 7 acl links and 3 sco links Enhanced data rate(edr) compliant For both 2mbps and 3mbps modulation modes Interface: usb, uart&pcm( for voice codec) Spp firmware with at commands Rohs compliant Small outline: 28.2 x 15.0 x 2.8 mm Application:- Access point Domestics and industrial applications Serial adapter Gps, pos, barcode reader.
1) Small size, embedded applications. 2) 4CH CVBS input,the default for CH1, serial ports instructions choice. 3) By the command control, you can adjust the time, take pictures, Continuous shooting (number can be set),TF card storage, uploading new picture, according to the time obtaining history pictures. 4) The module has real-time clock function, time information is in addition to the photographs. 5) TF card default storage 200 pictures, save the recent 200 pictures by the circulation mode. 6) CVBS output, connect monitor or DVR. 100 pcs/box.
Product Readme Digital RF modulation with frequency (Automatically switch RF channels) Dynamic select clean channel to avoid interference from other 2.4GHz devices Data privacy protect(support User ID recognition) Voice detection function optional Bidirectional transmission and support data encrypt 2.5''Screen Display with 320*240 resolutions IR Night Vision (Effective Range: 5 M) Remote command delay less than 0.01 second Built-in microphone for audio monitoring Up to 100m (330ft.) Transmission range in open space
Luxury massage chair dk-6188 Features: LCD display commands with EL lighting Auto/manual function A quiet designed quad-roller humanized massage hands travel up and down at backrest Acupressure, kneading, patting, knocking & synchronized massages perform on back The 2 massage hands are adjustable with 3 grades of massage breadth modulation Designate massage zone and massage location on back 6 massage modes Adjust kneading & air pressure intensity 4 airbags & 1 vibration perform on buttock & thighs 8 airbags perform on calves Auto time setting is 5-30 minutes Automatic ascending and descending backrest and leg rest
Luxury massage chair DK-6288 Features: Lcd display commands with el lighting Auto/manual function A quiet designed quad-roller humanized massage hands travel up and down at backrest Acupressure, kneading, patting, knocking & synchronized massages perform on back The 2 massage hands are adjustable with 3 grades of massage breadth modulation Designate massage zone and massage location on back 6 massage modes Adjust kneading & air pressure intensity 4 airbags & 1 vibration perform on buttock & thighs 8 airbags perform on calves Auto time setting is 5-30 minutes Automatic ascending and descending backrest and leg rest
JMY680 series are RFID reader/writer module with IIC or UART serial ports. JMY680 has various functions and supports multi ISO/IEC standard of contactless IC card; the cards from different suppliers. The designer combined some frequent used command of RF IC card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The module and antenna are integrated design. And the impedance between RF module and antenna was tuned by impedance analyzer. So the module has excellent performance and stability. Qualifications: PCD: NXP RC500, RC531, RC400, RC632 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 80mm(depending on card and antenna design) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default ON SAM card slot: 1 slot, 9600bps /38400bps EEPROM: 512 Bytes PPSS set: Supported Interface: IIC, UART, RS232C or USB to RS232C Bridge(select when place order) Communication rate: IIC--400Kbps; UART--19.2Kbps/115.2Kbps Max.command length: 511 Bytes Interface level: 3.3V (TTL level; 5V tolerance) Power supply: 5.0V Power consumption: 150mA Dimension: 70mm¡Á50mm¡Á16.5mm Weight: about 120g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF ISP: Supported RoHS: Compliant 10 pcs per box, box size 16*12*5cm.
GSM/GPRS modem with TCP/IP stack Qual band 850/1900MHz or 900/1800MHz RS-232 interface Open AT Command Support: SMS, MMS, Voice, Fax-depends on module Support: Windows 2000/Me/XP, SCO UNIX, SCO XEINX, Linux Features: GSM quad-band GPRS class 10 Voice/data/fax/SMS TCP/IP: Full (FTP and E-mail added). Functional features: Input/output digital: 1 Download over the air: Optional AT command set: >300 Auto-restore timer reset: Yes Voice, data and SMS features: Data circuit asynchronous, transparent and non-transparent up to 14, 400-bit/second Automatic fax group 3(class 1 and class 2) MNP2, V. 42bis Text and PDU SMS (MT/MO) UCS2 character set management Other features: Operating status LED Casing: Metal DIN rail mounting. Interface: SIM plug-in card reader: 1.8/3V RS232 on 15-pin sub-D connector Pin power supply connector: 4-pin DC SMA antenna connector (50 Ohms) Dimension metal . Size: 88 x 66 x 26mm Weight: 100g.
Description The Trusted TMR expander processor module resides in the processor slots of the Trusted expander chassis and provides the slave interface between the expansion bus and the expander chassis backplane. The expander bus allows multiple chassis systems to be implemented using UTP cable connections whilst maintaining the fault tolerant, high bandwidth inter-module bus (IMB) capabilities. The module provides fault containment for the expander bus, the module itself and the expander chassis, ensuring that the effects of these potential faults are localized and system availability maximized. The module is fault tolerant with Hardware Implemented Fault Tolerant (HIFT), Triple Modular Redundant (TMR) architecture. Comprehensive diagnostics, monitoring and testing provide rapid fault identification. Hot standby and module sparing configurations are supported, allowing automatic and manual repair strategies. Communication between the expander processor and the TMR processor is via the TMR expander interface module and the triplicated expander bus. The expander bus is triplicated, point-to-point architecture. Each channel of the expander bus comprises separate command and response media. Voting is provided at the expander bus interface to ensure that cable faults are tolerated, and the remainder of the expander processor operates in a fully triplicated mode, even in case of cable faults occurring. Communication between the expander processor and the I/O modules in the expander chassis is via the IMB on the backplane of the expander chassis. The IMB is identical to that within the controller chassis, providing the same fault tolerant, high bandwidth communications between the interface modules and the TMR processor. As with the expander bus interface all transactions are voted, localizing faults to Fault Containment Region (FCR) within the IMB should occur. The TMR expander processor module derives its internal voltages from dual redundant +24V dc power supplied via the module connector from the Trusted expander chassis backplane. Each FCR derives the required supplies independently. Non-critical monitoring and module status display functions (front panel LEDs) are also provided. Features Triple Modular Redundant (TMR), fault tolerant (3-2-0) operation. Hardware Implemented Fault Tolerant (HIFT) architecture. Dedicated hardware and software test regimes which provide fast fault recognition and response times. Automatic fault handling without nuisance alarming. Hot replacement. Front panel status LEDs.
Description The Trusted TMR expander interface module resides in the Trusted controller chassis and provides the master interface between the inter-module bus (IMB) in the controller chassis and the expander bus. The expander bus allows multiple chassis systems to be implemented using UTP cable connections whilst maintaining the fault tolerant, high bandwidth IMB capabilities. The module provides fault containment for the expander bus, the module itself and the IMB in the controller chassis, ensuring that the effects of these potential faults are localized and system availability maximized. The module is fault tolerant with Hardware Implemented Fault Tolerant (HIFT), Triple Modular Redundant (TMR) architecture. Comprehensive diagnostics, monitoring and testing provide rapid fault identification. Hot standby and module sparing configurations are supported, allowing automatic and manual repair strategies. Communication between the expander interface and the TMR processor is via the IMB on the backplane of the controller chassis. The IMB provides fault tolerance and high bandwidth communications between the interface modules and the TMR processor. All transactions are voted, localizing faults to a Fault Containment Region (FCR) within the IMB they occur. Communication between the interface module and the TMR expander processor in the expander chassis is via the expander bus. The expander bus is triplicated, point-to-point architecture. Each channel of the expander bus comprises separate command and response media. Voting is provided at the expander bus interface to ensure that cable faults are tolerated, and the remainder of the expander processor operates in a fully triplicated mode, even in case of cable faults occurring. The TMR expander interface module derives its internal voltages from dual redundant +24V dc power supplied via the module connector from the Trusted controller chassis backplane. Each FCR derives the required supplies independently. Non-critical monitoring and module status display functions (front panel LEDs) are also provided. Features Triple Modular Redundant (TMR) fault tolerant (3-2-0) operation. Hardware Implemented Fault Tolerant (HIFT) architecture. Dedicated hardware and software test regimes which provide fast fault recognition and response times. Automatic fault handling without nuisance alarming. Hot replaceable. Front panel status LEDs.
Model: JMY680H 1.Product introduction JMY680H is a RFID read/write module with an UART/IIC/RS232C serial port. The module has various functions and supports the ISO/IEC14443A&B and ISO15693 and ISO7816 contactless cards. Users operate the module via simple command. The module embedded with SAM slot that operate contact smart card according to ISO7816. The module builds in antenna. 2.Characteristics PCD model:NXP CL RC632 Working frequency: 13.56MHz Card supported:Mifare 1K/4K, FM11RF08, Ultra Light, DesFire, Mifare ProX, SR176, SRI512, SRI1K, SRI2K, SRI4K, SRIX4K, T=CL smart cards(both ISO14443A & ISO14443B) , TI TagIt, I.Code SLI, ST LRI and other tags according to ISO15693 and ISO7816 SAM cards (both T=0&T=1) Anti collision ability:Full function anti collision; be able to process multi-cards; be able to set operate single card only Auto detecting card:Supported, default OFF SAM slot:1 slot SAM baud rate:9600bps/38400bps ISO7816 PPSS set:supported EEPROM:512 Bytes Power supply:DC 5V Interface:IIC/UART/RS232C (select when place order) Communication rate:IIC:400Kbps UART: 19.2Kbps/115.2Kbps Max. command length:254 Bytes Interface level:UART/IIC: 3.3V (TTL level; 5V tolerance) Power consumption: 150mA Operating distance:150mm (depending on card) Dimension:70mm*50mm*16.5mm Weight:About 120g ISP:Supported Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF RoHS:Supported 3.Protocol There are UART, IIC or RS232C three optional types of interfaces between the host and module. IIC has the advantage of high communication rate and convenient operation. RS232C has long operation distance. Users select the interface according to the special system. 4.Automatic detecting card The automatic detecting card function supports the ISO14443A and ISO15693. This function supports only one card operation. Inner package: box (size: 17.5*14*7cm) Outer package: carton (size: 48*32*24mm) Weight: 330g Terms of delivery: dhl, tnt Delivery time: 5 working days after receive payment.
The SIM7000E is Tri-Band LTE-FDD and Dual-Band GPRS/EDGE module solution in a SMT type which supports LTE CAT-M1(eMTC) and NB-IoT up to 375kbps data transfer. It has strong extension capability with rich interfaces including UART, USB2.0, GPIO etc. The module provides much flexibility and ease of integration for customer's application. The package of SIM7000E is compatible with SIM900 and SIM800F. AT commands of SIM7000E are mostly compatible with SIM800F. This also maximizes the investments of customers, and enables a short time-to-market. It is designed for applications that need low latency, medium throughput data communication in a variety of radio propagation conditions. Due to the unique combination of performance, security and flexibility, this module is ideally suited for M2M applications, such as metering, telematics, asset tracking, remote monitoring ,E-health , mobile pos terminals and sharing bike. General features - Tri-Band FDD-LTE B3/B8/B20 - GPRS/EDGE 900/1800Mhz - Output power - GSM900: 2W - DCS1800: 1W - Control Via AT Commands - Supply voltage range: 3.0V~ 4.3V, Typ: 3.8V - Operation temperature: -40 to +85 - Dimensions: 24 X 24 X 2.6mm - Weight: 3.0g - GNSS (GPS,GLONASS and BeiDou/Compass, Galileo, QZSS) Specifications for Data transfer - LTE CAT-M1(eMTC) - Uplink up to 375kbps, Downlink up to 300kbps - NB-IoT - Uplink up to 66kbps, Downlink up to 34kbps - EDGE Class - Uplink up to 236.8Kbps, Downlink up to 236.8Kbps - GPRS - Uplink up to 85.6Kbps, Downlink up to 85.6Kbps Other features - USB Driver for Microsoft Windows XP/Vista/7/8 - USB Driver for Windows CE/Mobile - USB Driver for Linux/Android - Firmware update via USB - TCP/IP - PPP - SMS - EMAIL - FTP/HTTP/SSL - VoLTE* - FOTA* Interfaces - USB2.0 x1 (high-speed) - UART x2 (7-wire UART and 2-wire UART interface multiplex from GPIO) - SIM card x1 (1.8V and 3V) - I2C x1 - GPIO x5 - ADC x1 Consumption - Power off: 7uA - PSM: 9uA - Sleep: 1mA - Idle: 11mA
The SIM7000E is Tri-Band LTE-FDD and Dual-Band GPRS/EDGE module solution in a SMT type which supports LTE CAT-M1(eMTC) and NB-IoT up to 375kbps data transfer. It has strong extension capability with rich interfaces including UART, USB2.0, GPIO etc. The module provides much flexibility and ease of integration for customer's application. The package of SIM7000E is compatible with SIM900 and SIM800F. AT commands of SIM7000E are mostly compatible with SIM800F. This also maximizes the investments of customers, and enables a short time-to-market. It is designed for applications that need low latency, medium throughput data communication in a variety of radio propagation conditions. Due to the unique combination of performance, security and flexibility, this module is ideally suited for M2M applications, such as metering, telematics, asset tracking, remote monitoring ,E-health , mobile pos terminals and sharing bike. General features * Tri-Band FDD-LTE B3/B8/B20 * GPRS/EDGE 900/1800Mhz * Output power - GSM900: 2W - DCS1800: 1W * Control Via AT Commands * Supply voltage range: 3.0V~ 4.3V, Typ: 3.8V * Operation temperature: -40â?? to +85â?? * Dimensions: 24 X 24 X 2.6mm * Weight: 3.0g * GNSS (GPS,GLONASS and BeiDou/Compass, Galileo, QZSS) Specifications for Data transfer * LTE CAT-M1(eMTC) - Uplink up to 375kbps, Downlink up to 300kbps * NB-IoT - Uplink up to 66kbps, Downlink up to 34kbps * EDGE Class - Uplink up to 236.8Kbps, Downlink up to 236.8Kbps * GPRS - Uplink up to 85.6Kbps, Downlink up to 85.6Kbps Other features * USB Driver for Microsoft Windows XP/Vista/7/8 * USB Driver for Windows CE/Mobile * USB Driver for Linux/Android * Firmware update via USB * TCP/IP * PPP * SMS * EMAIL * FTP/HTTP/SSL * VoLTE* * FOTA* Interfaces * USB2.0 x1 (high-speed) * UART x2 (7-wire UART and 2-wire UART interface multiplex from GPIO) * SIM card x1 (1.8V and 3V) * I2C x1 * GPIO x5 * ADC x1 Consumption * Power off: 7uA * PSM: 9uA * Sleep: 1mA * Idle: 11mA
Model mumber: yes1-100ga Detailed product description Automatic transfer switch application: source changeover switching for all industrial and commercial lv electrical installations From 20 to 3200a. Original features and advantages: ití»s a wholly new design concept, offering a compact automatic changeover switching System which only requires the power cables to be connected for it to operate. Main functions and characteristics:- motorised changeover of two mechanically-interlocked cut-out and disconnection Systems - emergency manual control - power sources and changeover controlled by an integrated electronic module- configuration, display and communication using an ergonomic programming and command/control Interface - simplified connection using a self-powered voltage measurement kit connected to The power sources which have to be switched over (optional) - product ready for use, tested at the factory
Fixed wireless terminal Simple to install and easy to maintain Network support: gsm 850 900 1800 1900 mhz Imei changing function.You can change the imei to any 15digital code. Highquality voice Wide voltage range & low power consumption Provide accurate antipolarity signal Support dtmf Support pc fax Call forwarding Caller id Support 2nd stage dialing Provide command sets from phone keypad Add prefixal code automatically: Skype: tinazhu Callback function: Barred telephone numbers can be set flexibly Locking wireless terminal, locking sim card, locking districts and locking network Industrial module Connection mode: rj11 phone sockets Enhanced high gains external antenna Backup battery (optional) Power on/off indicator Signal strength indicator
"provides driven massage hands, vibration & airbag function Features: Lcd display commands with el lighting Auto/manual function A quiet designed quad-roller humanized massage hands travel up and down at backrest Acupressure, kneading, patting, knocking & synchronized massages perform on back The 2 massage hands are adjustable with 3 grades of massage breadth modulation Designate massage zone and massage location on back 6 massage modes Adjust kneading & air pressure intensity 4 airbags & 1 vibration perform on buttock & thighs 8 airbags perform on calves Auto time setting is 5-30 minutes Automatic ascending and descending backrest and leg rest Mea s:116*76*84 cm Pkg: 1pc/ctn N.W.: 70 kgs g.W.: 75kgs
Luxury massage chair Features: Lcd display commands with el lighting Auto/manual function A quiet designed quad-roller humanized massage hands travel up and down at backrest Acupressure, kneading, patting, knocking & synchronized massages perform on back The 2 massage hands are adjustable with 3 grades of massage breadth modulation Designate massage zone and massage location on back 6 massage modes Adjust kneading & air pressure intensity 4 airbags & 1 vibration perform on buttock & thighs 8 airbags perform on calves Auto time setting is 5-30 minutes Automatic ascending and descending backrest and leg rest Ce-emcú¼ce-lvdú¼rohs " Meaí»s:116*76*84 cm Pkg: 1pc/ctn N.W.: 70 kgs g.W.: 75kgs
