http://armdevs.Com/ipc-sama5d35.Html Working temperature: -40 to +85 celsius Atmel sama5d34 cortex-a5 cpu, 536 mhz 512 mb ddr2 sdram, 256 mb nand flash Two ethernet support Tft lcd with touchscreen, audio Can, rs485, rs232 support Cm-sama5d35 cpu board feature Cpu processor Atmel sama5d35 arm processor Cortex-a5, working at 536mhz. Ddr2 ram memory 256mb ddr2 ram, 32bit data bus Flash memory 256mb nand flash 4mb spi flash Pin interface 2 x 60 pin 2.0mm space dip connector 1 x 30 pin 2.0mm space dip connector Two ethernet and seven serial port Resource: usb, ethernet, serial, ssc audio, can, sdio, spi, iic, gpio On-board resources Integrated 1gmbit ethernet on board 2 x led Supply voltage 3.3v Pcb size 8 layer, 52 x 64 (mm) Low power consumption, only 0.5w Ipc-sama5d35 base board feature Ethernet Two ethernet port > one gbit ethernet support, rj45 interface > one 100m ethernet support, rj45 interface Serial port Total seven serial port: > debug serial: rs232 level, db9 connector > usart0: rs485 level, connector > usart1: ttl level(5-wire, expand with 2x5pin header com ) > usart2: rs232 level(expand with 3.81 connector) > usart3: ttl level(5-wire, expand with 2x5pin header com ) > uart0: ttl level(3-wire, expand with 2x5pin header com) > uart1: ttl level(3-wire, reused with the audio chips) Can bus: 1 x can bus 2.0 Standard interface Two usb host One usb device interface One audio in/out interface One tf card interface Board resource Key: 3 user key, contain one reset key and two user key One rtc battle Gpio: 16 gpio interface Pcb size: 145 x 110mm, 2 layer Power in: 12v System: linux 3.6.9 Software support U-boot Support update the system by usb disk Support update the system by ethernet Version: linux 3.6.9 Driver support Can driver: support can bus
Lnk-277 series is an industrial grade rs-232 / rs-422/ rs-485 to fiber optic converter which converts a standard rs-232 / rs-422 / rs-485 transceiver to a fiber optic link as to extend the serial signal up to 2km on multimode fiber and 80km on single mode fiber. This unit is enclosed in an industrial wall mount compact size rugged steel case. StandardEia /tia rs232, rs-422, rs-485 Fiber connectorSc standard, st/fc optional Fiber distance50/125um mmf: 2km, 62.5/125um mmf: 5km, 9/125 smf:20/40/60/80km Serial connectorRs-232: db9, rs-422, rs-485: phoenix terminal Serial distanceRs232: 15 meters, rs-422, rs-485: 1500 meters Rate0-120kbps Baud rate300 baud to 115, 200 baud Rs-232In, out, gnd Rs-485D+, d-, gnd Rs-422R+, r-, t+, t-, gnd Power supplyDc2.5 5v(9v-48v) Power rate2w Static protection15kv electric static discharge (esd) protection Surge protection1500w/sec surge protection Operation temperature-25°c to +70°c Storage temperature-40°c to +85°c Storage humidity5%~90% non-condescending Dimensions110(l)*104(w)*28(h) mm Weight0.3kg/pcs Standard packaging: carton packaging(support customer logo)
Introduction of RS232 to Ethernet Converters The RS232 to Ethernet Converters, used for data transparent transmission. USR-TCP232-302 is a low-cost serial device server,whose function is to realize bidirectional transparent transmission between RS232 and Ethernet. USR-TCP232-302 is internally integrated with TCP/IP protocol. User can apply it to device networking communication. Features of RS232 to Ethernet Converters Support DHCP, automatically obtain an IP address and query IP address through serial setting protocol Support DNS function Set parameters through webpage Upgrade firmware via network Auto-MDI/MDIX, RJ45 port with 10/100Mbps Serial port baud rate from 600 bps to 230.4 Kbps, Check bit of None, Odd, Even, Mark and Space Work mode: TCP Server, TCP Client, UDP Client, UDP Server, HTTPD Client Support virtual serial port and provide corresponding software USR-VCOM Heartbeat package mechanism to ensure connection is reliable, put an end to dead link User-defined registration package mechanism, check connection status and use as custom packet header Under TCP Server mode, Client number ranges from 1 to 16; default number is 4 The global unique MAC address bought from IEEE, user can define MAC address Restore factory default Across the gateway, switches, routers Can work in LAN, also can work in the Internet (external network) Provide PC TCP/IP socket programming example such as VB,C++,Delphi,Android and IOS Support customization Application Field of RS232 to Ethernet Converters Industrial data transmission, industrial automation security and protection monitoring, public security Smart home, power control, environmental monitoring, intelligent agriculture Door check on work attendance system, POS system, rice selling system Building automation system, power monitoring, self-service banking system, telecom machine room monitoring
Overview The super32-l is a series of compact rtu that brings advanced automation capabilities and open programming to applications requiring small i/o points. It is built on a high performance 32-bit processor with embedded real-time operating system to meet all monitoring and control requirements. A broad array of communication ports and extensive protocol library provide broad network compatibility. Super32-l also offers an open programming environment that supports all iec61131-3 languages. A rich library provides numerous pre-engineered function blocks, which project engineers find invaluable. Features High performance 32-bit cpu with embedded real-time operating system (rtos)compact design with up to 25 i/o points and 4 communication ports extensive communication protocols such as modbus rtu/ascii/tcp, dnp3 open programming environment that supports all iec61131-3 languages including ld, fbd, il, st and sfc built-in watchdog timer helps to protect your application from erroneous outputs All the terminal blocks are isolated from the main control circuit. Carton
Overview The super32-l is a series of compact rtu that brings advanced automation capabilities and open programming to applications requiring small i/o points. It is built on a high performance 32-bit processor with embedded real-time operating system to meet all monitoring and control requirements. A broad array of communication ports and extensive protocol library provide broad network compatibility. Super32-l also offers an open programming environment that supports all iec61131-3 languages. A rich library provides numerous pre-engineered function blocks, which project engineers find invaluable. Features High performance 32-bit cpu with embedded real-time operating system (rtos)compact design with up to 25 i/o points and 4 communication ports extensive communication protocols such as modbus rtu/ascii/tcp, dnp3 open programming environment that supports all iec61131-3 languages including ld, fbd, il, st and sfc built-in watchdog timer helps to protect your application from erroneous outputs All the terminal blocks are isolated from the main control circuit. Carton
With the support of skilled professionals, we are able to trade and supply quality approved Remote IO Module. Sourced from our trusted vendors of the market, this IO module is made using best grade component and pioneered technology at their well-equipped manufacturing unit. Furthermore, this IO module is immensely checked by our quality experts by passing it through various quality parameters. Our prestigious clients can avail this IO module at market leading prices. Features: Low power consumption Easy installation Long service life
5000 series ethernet/usb and rs 485/232 remote control modules, 8000 series rs 485 digital and analog i/o remote control modules, 8500 series rs 485, rs 422 and rs232 communication sereis, 9000 series ethernet remote control modules.
Overview Ajlon RTU is a Quad band GPRS 2G/3G/4G communication enabled device which RS232 or Serial or RS485 over Modbus RTU protocol and transfers vital operational data (measurement as well as alarm data) to the remote server in a timely manner Product Features Communicates with any RS485 device over Modbus RTU and collects all related data periodically All data and event messages are time stamped USB Interface to program all configurable parameters Configurable Remote Server IP Address, Server Port number Configurable GPRS Service provider APN, Username and Password Modbus communication parameters baud rate, parity, number of stop bits etc Modbus Poll interval, server data transfer interval RTC time Any device site name Watchdog timer enabled system integrity Built-in retry and buffering mechanism to transfer data to the server to mitigate low signal strength and temporary GPRS service outage problem Technical Specifications Supply Voltage 24V DC Input type Modbus RTU or Serial or RS232 Modbus RTU mode Supports Master mode â?? Can communicate with the slave device and get operational parameters and control the output state of device VFD poll rate Programmable â?? minimum 60 seconds configurable parameters 1 Remote server IP, Port number 2 Poll interval 3 RTC Time 4 Modbus Communication parameters- Baud rate, parity, number of stop bits etcâ?¦ 5 Device name LED Indication LED indication in the front panel for all type of fault states 1.GSM Module error 2.SIM Presence state 3.GSM Signal Strength 4.Unit Health Status 5.Modbus communication status 6.Server connectivity status Operational Parameters for Remote monitoring Parameters available with any selected device Alarms for Remote Monitoring Parameters supported by device GPRS connection mode Continuous Always connected to theserver Environmental Specifications Operating Temperature 0 C to 50 C Storage Temperature 0 C to 70 C Relative Humidity 85% Non condensing
16-ch Analog Input Module with 2-ch Isolated DI and 1-ch DO * Protocol USB2.0 TCP/IP, MODBUS RTU, MODBUS TCP ASCII Command * Support USB2.0, 10/100 Ethernet, RS-485/232C, CAN (optional) * Fully photo-isolation 3750Vrms * Wide supply voltages (10~30V)
EDAM-9017 Ethernet-Based 8-ch Isolated Analog Input Module * Support protocol Modbus / TCP/ IP, UDP, JCMP, ARP * Provides two digital outputs (open collector) * Ethernet 10/100 Based-T communication * Support isolated input channels * Support +- V, +- mV, mA analog input * Fully photo-isolation 3750Vms * Built-in TVS/ESD protection * Wide supply voltage (10-30V)
EDAM-5017 16-ch Analog Input Module with 2-ch Isolated DI and 1-ch DO * Protocol USB2.0 TCP/IP, MODBUS RTU, MODBUS TCP ASCII Command * Support USB2.0, 10/100 Ethernet, RS-485/232C, CAN (optional) * Fully photo-isolation 3750Vrms * Wide supply voltages (10~30V)
EDAM-9053A 12 DI (Dry/Wet contact) and 4 DO channels Digital I/O module * Support Modbus/TCP,TCP/IP,UDP,ICMP,ARP * Ethernet 10/100 Based-T Communication * Support 4 Isolated digital output channels (NPN). * Provide Pulsed/delay Output Mode * Support 12 Isolated digital Input Channels * Provide Counter/ Frequency Inputs Mode * Support Dry/ Wet Contact Inputs * Fully Photo-Isolation 3750Vrms * Status LED indicator
EDAM-9050 12 DI and 6 DO channels Digital I/O Module * Support Modbus/TCP,TCP/IP, UDP, ICMP, ARP * Ethernet 10/100 Based-T Communication * Support 6 Isolated digital output channels (NPN). * Provide Pulsed/delay Output Mode * Support 12 Isolated digital Input Channels * Provide Counter/ Frequency Inputs Mode * Support Dry Contact Inputs * Fully Photo-Isolation 3750Vrms * Status LED indicator
EDAM-9015 Ethernet-Based 7-ch RTD Input Module * Support PT100,PT1000, Balco 500,NI604, NI1000 RTD Types * Support Protocol Modbus/TCP, TCP/IP, UDP, ICMP, ARP * Ethernet 10/100 Based-T Communication * Support Isolated Input Channels * Fully Photo-Isolation 3750Vrms * Wide Supply Voltages (10-30V) * Bulit-in TVS/ESD Protection * Bulit-out Auto Detection
EDAM-5019 16-ch Thermocouple Input Module with 2 iso. DI and 1 DO * Protocol USB2.0 TCP/IP, MODBUS RTU, MODBUS TCP ASCII Command * Support USB2.0, 10/100 Ethernet, RS485/232C, CAN (optional) * Support Thermocouple J, K, T, R, S, E, B, N, C Type * Support isolated input channels * Fully photo-isolation 3750Vrms � Wide supply voltages (10_30V) * Built-in TVS/ESD protection * Burn-out auto detection
EDAM-8066D 8-ch Photo-MOS relay Output module with LED display 1. 8-Channels Isolated Output 2. Normal Open PhotoMOS Relay Output 3. Typical applications: * High-speed inspection machines * Telephone equipment * Data communication equipment 4. Programmable Host Watchdog Timer For Host Failure Protection. 5. Support MODBUS RTU And ASCII Format Protocol.
EDAM-8065BD 5-ch ISO DI and 5-ch DC-SSR Output with LED display * Support 4 isolated digital input channels * Input channel support max. 50Hz counter * Support 5 DC-SSR output channels * Programmable Host Watchdog Timer For Host Failure Protection. * Support MODBUS And ASCII Format Protocol
EDAM-8024 4 analog output and 4 digital input channels module * 4 isolation analog output channel . * 14 bits Analog Resolution * Programmable voltage/current range with slew rate. * 4 channels isolation digital input * 3000 Vrms isolation voltage for A/O channel * Programmable power-on value and safe value * Programmable host watchdog timer for host failure protection. * Support ASCII format and Modbus-RTU protocol
EDAM-8065AD 5-ch ISO DI and 5-ch AC-SSR Output with LED display * Support 4 isolated digital input channels * Input channel support max. 50Hz counter * Support 5 AC-SSR output channels * Programmable Host Watchdog Timer For Host Failure Protection. * Support MODBUS And ASCII Format Protocol
EDAM-8060D 4-ch ISO DI and 4-ch relay Output with LED display * Support 4 isolated digital input channels * Input channel support max. 50Hz counter * Support 4 relay output channels(RL1~RL4) * RL1,RL2: Form A, RL3,RL4: Form C * Programmable Host Watchdog Timer For Host Failure Protection. * Support MODBUS And ASCII Format Protocol
