Hydroman Hydraulic Gravel Gold River Submersible Dredging Pump Description: Hydroman Hydraulic Gravel Gold River Submersible Dredging Pump are suitable for 120, 150, 220, 240, 300, 330, 360 and other small, medium and large series of Excavators. Besides, they are specialized for those circumstances that are difficulty to dig, such as much more water and watery sludge and sand. Remove the bucket and connect to the hydraulic mortar pump, concentration of extraction with high efficient and density could be achieved. The work efficiency improves greatly with the matching hydraulic dredge pump and long-distance transportation is also realized. In addition, The dredge pump could be equipped with hydraulic station and applies to the harsh environment. Hence, several difficulty conditions could be dealt with such as excavators digging ineffectively, long-distance transportation of mud and mortar, lack of electricity supply and frequent switching conditions. In conclude, it can supply to various conditions.
Hydroman Offloading Submersible Dredge Pump Description: Hydroman Offloading Submersible Dredge Pump is also called Submersible agitator dredge pumps, it is a single suction submersible sand pump that allows solid to be drawn. Submersible dredge pump is the kind of heavy duty submersible mud pump that is applied for the dredging process to transport underwater sand, slurry, sludge, gravel or other sediments to specified place.
Hydroman Submersible Sand Dredging Pump Description: Hydroman Submersible Sand Dredging Pumps are suitable to be used for pumping sand. Sand is pumped mixed with water up to 70% of solids by weight. The mixture of liquid and particles of sand and gravel is pumped in a procedure often used as a convenient way of handling sand and gravel. There are many applications for submersible sand pumps: sand and gravel extraction, dredging of rivers, harbors and marines maintenance or construction, beach reclamation, filling of Geotubes, among others. Here below you can read about some of the multiple applications of sand pumps.
Hydroman Hydraulic Gravel Gold River Submersible Dredging Pump Description: Hydroman Hydraulic Gravel Gold River Submersible Dredging Pump are suitable for 120, 150, 220, 240, 300, 330, 360 and other small, medium and large series of Excavators. Besides, they are specialized for those circumstances that are difficulty to dig, such as much more water and watery sludge and sand. Remove the bucket and connect to the hydraulic mortar pump, concentration of extraction with high efficient and density could be achieved. The work efficiency improves greatly with the matching hydraulic dredge pump and long-distance transportation is also realized. In addition, The dredge pump could be equipped with hydraulic station and applies to the harsh environment. Hence, several difficulty conditions could be dealt with such as excavators digging ineffectively, long-distance transportation of mud and mortar, lack of electricity supply and frequent switching conditions. In conclude, it can supply to various conditions.
Tobee WN Dredge Pumps are single-stage single suction cantilever horizontal centrifugal pumps with advantages of light weight, good wear-resistance, super dredging performance, WN dredging pumps impeller passage is very wide, It can continuously transport gravels or high plastic clay and not happens jam, Especially for dredging sands and damming of the river and seas. WN Series Dredge Pumps can be also integrated with the gearbox, That mean the pump and gear box share one common shaft. So It doesn't need the pump bearing assembly and frame, In this way, Not only save space, but also reduce cost and breakdown ratio, Let the dredge pump give play to maximum effectiveness. Design Features: Construction WN200 to WN500 dredge pumps are of single casing, single stage cantilevered horizontal centrifugal pumps. Two types of coupling with gear box: frame and pump box. WN600 to WN1000 dredge pumps are of double casings, single stage cantilevered centrifugal pumps. These pumps are equipped with frame and lubrication is force thin oil. The design of double casing the pump working till the volute liner almost worn down and guarantee no leakage when volute liner is worn down.
Introduction: WN dredging pump is a new type of sludge pump, aiming at rivers and seas out of repair. WN dredging pump is a single-stage single suction cantilever horizontal centrifugal pump. Product Feature The structure of 200WN to 500WN type dredging pump is single-casing, single-stage, single-suction, cantilever and horizontal. According to the connection with the gear box, two structures can be offered: self-carrying bracket and pump-box assembly. The lubrication for the bracket is grease or thin oil. The structure of 600WN to 1000WN type dredging pump is double-casing, single-stage, single suction, cantilever and horizontal. It has self-carrying bracket. Lubrication is forced thin oil lubricating. The double-casing design can ensure the liner can work till it is worn out, and if the liner crack, water can not enter into the pump. Electric single-suction 700WN dredge pump Electric single-suction 700WN dredge pump Qaulity Control We have our own casting factory,so that we control the qaulity from raw material.We take sample to do chemical test before casting and do another test during casting to confirm the right percentage of all components.And casting,we would do physical test and spectrum analysis when and after assembling pumps.We do impeller dynamic and static balance,bearing test,roto test to test noise,vibration,shaft.Also we have paiting hourse to paint pumps. Company Information Shijiazhuang Ruite Pump Co., Ltd supplying a precision range of pumps including slurry pump (horizontal and vertical) chemical pump (desulfurization pump), sand pump, and all kinds of pumps parts. With years experence in manufacturing and service, now we exported the pumps to Eastern Europe, Africa, and Asia.They all sales well for their durability and energy-saving property. Centrifugal pump for mining is contain cantilever and horizontal centrifugal pumps,which apply to transport slurry with strong corrosion proof and high concentration for such industries as Metallurgy,mine,coal,power,building etc.This kind of pump can be used in multi stages. FAQ 1.Are you a trading company or manufacture? We are Professional Slurry Pump Manufacturers. And welcome to our factory to see our product line and our pump quality. 2..we don't know which model we need ,can you help us ? yes, please let us know the pump capacity ,head , then we can help you to calculate . 3.Is your price the best ? You get what you pay off. We supply high effiency good performance slurry pump. 4.What is the best delivery time? Within 20 days. 5. Warranty Period? One year, except spare parts
Product Description Introduction: WN dredging pump is a new type of sludge pump, aiming at rivers and seas out of repair. WN dredging pump is a single-stage single suction cantilever horizontal centrifugal pump. Specification Item Dredging pump factory price WN series sand suction dredging pump for sale Model WN Material Alloy cast iron, alloy steel and customized Color White and adjustable Seal Soft packing seal or mechanical seal Speed 120r/min~~~1400r/min Theory Centrifugal pump Structure Single stage pump Outlet diameter 100-1200mm Capacity 180-22000m3/h Head 20-80m Warranty 1year Certificate ISO9001 Applications Delivering gravel Digging mud Filling harbor in rive Sea all over the country Petrochemical Dredging Other industrial departments, etc. factory produce high sale Ruite Brand Slurry Pump Product Feature The structure of 200WN to 500WN type dredging pump is single-casing, single-stage, single-suction, cantilever and horizontal. According to the connection with the gear box, two structures can be offered: self-carrying bracket and pump-box assembly. The lubrication for the bracket is grease or thin oil. The structure of 600WN to 1000WN type dredging pump is double-casing, single-stage, single suction, cantilever and horizontal. It has self-carrying bracket. Lubrication is forced thin oil lubricating. The double-casing design can ensure the liner can work till it is worn out, and if the liner crack, water can not enter into the pump. factory produce high sale Ruite Brand Slurry Pump factory produce high sale Ruite Brand Slurry Pump With years experence in manufacturing and service, now we exported the pumps to Eastern Europe, Africa, and Asia.They all sales well for their durability and energy-saving property. Centrifugal pump for mining is contain cantilever and horizontal centrifugal pumps,which apply to transport slurry with strong corrosion proof and high concentration for such industries as Metallurgy,mine,coal,power,building etc.This kind of pump can be used in multi stages.
¡¡4. Impeller type: non-clog (3/5vans) 5. Shaft sealing: packing/ mechanical ¡¡6. Wet parts material: a05, a07, steel 3) sand dredging pump general features: Xiyue brand xn sand dredging pumps are specially designed for dredge boat around river mud Delivering. It¡¯s single-stage, single-suction, centrifugal pumps with reliable structure and design. ¡¡¡¡1. Good structure design for marine using. ¡¡¡¡¡¡200xn-500xn series are single casing and 600xn-1000xn are two casing structure. ¡¡¡¡¡¡they both apply forward disassemble way and easy maintenance. According to the connection ¡¡¡¡¡¡with the pump working part, two structures can be offered: self-carrying bracket and pump ¡¡¡¡¡¡integrated with gearbox. The lubrication for the bracket is grease or thin oil. ¡¡¡¡2. Good dredging performance ¡¡¡¡¡¡good cavitations performance makes sure the pump high suction capacity and allows high ¡¡¡¡¡¡head and heavy concentration dredging. The impeller with width channel allows a large ¡¡¡¡¡¡flow and high head. ¡¡¡¡3. Good anti-abrasiveness pump wet parts ¡¡¡¡all wet parts are made by top anti-abrasive chromium alloy with good impact ¡¡¡¡ resistance and anti-abrasiveness. ¡¡¡¡4. Bearing seal type ¡¡¡¡¡¡200xn~500xn dredging pump apply mechanical sealing and packing seal. ¡¡¡¡¡¡600xn~1000xn dredging pump equipped with l-type spiral rubber seal which consist of 3 ¡¡¡¡¡¡l-ring of 1 sleeve to ensure the bearing sleeve water clean, it also equipped with sand ¡¡¡¡¡¡water separator. ¡¡¡¡ ¡¡¡¡ ¡¡¡¡ ¡¡¡¡ ¡¡¡¡ 4) sand dredging pump structure: ¡¡ ¡¡xiyue brand xn dredge pump is a new type of sludge pump researched & manufactured By our company basing on international g type gravel pumps, aiming at rivers and seas out Of repair. Xn pump is a single-stage single suction cantilever horizontal centrifugal pump with ¡¡advantages of light weight, good wear-resistant, super dredging performance, perfectly suited Wooden box
Slurry pump, dredging pump, warman pump.
Tobee WNQ Submerged Dredge Pumps are also known as onboard dredge pumps, It can either be installed onboard of the dredging vessels or in the suction pipe or cutter ladder as submerged pump. Onboard dredge pumps are the primary power source for transporting the mixture to the hopper or discharge location. The dredge pumps are also essential for mixture transport in stationary dredgers and at pipeline booster stations. The WNQ series dredge pumps are single-walled conventional and high performance types, complete with drive, support and control systems. They can respond to a wide range of operational requirements. Each offers benefits according to dredging materials, circumstances, and weight and space limitations. Design Features: Heavy Duty - a double-walled pump construction fully equipped with interchangeable wear parts. Excellent configuration for the most demanding operations. Performance - a single-walled construction furnished with, where possible, replaceable wear parts. An all purpose dredge pump and balanced option as regards weight, size and replaceable wear parts. Easy - for operations that are less demanding. This is a single-walled construction without any replaceable wear parts - a pump construction with as few components as possible.
Tobee WN300 Dredge Booster Pump is a kind of highly effective wear-resistant marine dredging pump, The wetted parts like Impeller, volute liner, front liner and black liner is made of high chrome alloy. WN300 dredge pump is mainly used in dredgers for dredging river, dredging sands, Blowing sand reclamation, Dredging port, cleaning lake and sea etc. Design Features: WN300 Dredge Booster Pumps are the heart to the dredgers according to its capacity, working efficiency, transferring distance, suction depth. DOD Dredge Pump are designed with features of resistance to wear and malfunction, and general robust and reliable character, which are highly successful proven in abrasive sand dredging industry. Dredge Booster Pump offer a complete range of single-or double-walled, inboard or submerged, which are available for different uses. They can be used in inboard or submerged by single and double walled types.
Tobee WN450 Sand Dredge Pump is singe stage single suction horizontal cantilevered centrifugal dredging pump. Tobee designs and researches this new type dredging pump by making full use of advanced CAD software, aiming to dredging river, lake and seal which is in great need to dredge in the world. The use of this dredge pump has remarkable comprehensive economic benefits and can meet dredging ship's requirements completely. Design Features: Structure suitable for dredgers: The structure of WN450 type dredge pumps are single-casing, single-stage, single-suction, cantilever and horizontal. According to the connection with the gear box, two structures can be offered: self-carrying bracket and pump-box assembly. The lubrication for the bracket is grease or thin oil.
Tobee WN500 Gold Dredge Pump is designed for continuously handling the most difficult higher abrasive slurries & sands which contain too big solids, It has advantages of single case, wide channel, high chrome wetted parts. The discharge can be installed in 360 degree in any direction, easy to install and use, good cavitation performance, anti-abrasion etc. WN500 gold dredge pump mainly used for dredging, explosive sludge, dredger, sewage, mineral processing and metal smelting slag etc. WN 500 Gold Dredge Pump Applications: Construction: preparation, pumping and recycling of bentonite transportation of mud, sand, and gravel pumping in depth and special foundations moving slurries in civil works emptying sludge for tunnel construction
Tobee WN600 Suction Dredge Pump is a new type dredging pump, aiming to China's river, lake and sea situation, they haven't been repaired for many years and now they are in great need to dredge and fill hydraulically. The dredging pump has characteristic features: easy installation, long-life service, high efficiency, reliable bearing lining and good economical efficiency etc. This type of pump can meet dredger's requirements completely and each set of dredging pump has passed the inspection issued by ISO. Design Features: The whole construction is suitable for dredgers. Reliable and simple structure. Easy Disassembly and Installation, Convenient Maintenance. Good NPSH performance. Excellent Ant-wear Performance, Long Service of Wet Parts. A little Hydraulic Loss, High Efficiency, Low Consumption. Reliable shaft sealing without leakage. WN600 dredge pump has wide flow channel, which is designed for high density and lower abrasive slurry.
Tobee WN700 CSD Dredge Pump is a kindly of special pump used for cutter suction dredger, hopper suction dredger or offshore dredging platform etc. It is double casings, single stage cantilevered centrifugal dredge pump structure. WN700 dredge pump is equipped with frame and lubrication is force thin oil. The design of double casing the pump working till the volute liner almost worn down and guarantee no leakage when volute liner is worn down. Design Features: WN700 dredge pumps are of single stage, single suction, horizontal structure. According to discharging pressure, The WN700 dredge pump is double casing pump. Double casing design enhances the safety reliability. If volute liner is getting close to being worn out, or split, there will be no water leakage inside pump house. The WN700 dredge pumps can be work under water. The submerging depth can meet different requirements. Bearings use famous domestic or foreign brands. WN700 dredge pump has long trouble free working time. WN700 dredge pump uses front dismantling structure, and is easy to stall, disassemble and repair. Different components have special dismantling tools.
Tobee WN900 Marine Dredge Pump is one type of horizontal centrifugal dredging pump. It is mainly used for dredging in river, lake, seaport, lagoon, pond, reservoir etc. And it is usually installed in dredgers. It is very wearable for sand and mud dredging. The marine dredge pump is made of high chrome alloy. In accordance with clients' requirements, the dredge pump can be connected to diesel engine through connecting gearbox. Design Features: Advanced hydraulic model, CAD 3D design, high efficiency and obvious energy-saving Large dredging depth, high density of dredging mud, good NPSH and strong suction lift ability Strong through-put. The pump can persistently discharge gravel, high plastic soil lump,etc. The dredge pump can be directly matched with either motor or diesel engine Long operating life of parts Little hydraulic loss, high efficiency and low oil-consumption Large volume, Heavy duty Steady operating, little vibration, low noise Simple & reliable construction, easily disassembly & assembly, convenient maintenance Reliable sealing without leakage
Tobee WN1000 Dredge Pump is single-stage single suction cantilever horizontal centrifugal dredge pumps with advantages of light weight, good wear-resistance, super dredging performance, perfectly suited for the dredge on the whole construction, high multiple economy benefits, etc, It throughout meets requirements of the dredge to dredging pumps. Design Features: Overall structure performance well in marine use WN1000 dredge pump with a double pump casing, single stage single suction cantilever horizontal structure. According to the connection type with the gear box, there are two kinds of typical structure, one is with independent support, the other is combined with gear box. The lubrication of pump with support is grease lubrication or thin oil lubrication. The double casing design can make the pump body safe even when the liner is worn out. Easy to disassemble and maintenance: WN type dredging pump can be disassembled from front. This make the disassemble and maintenance easier.
1. Sludge dredging pump are designed for continuously handling the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. Such as dredging, suck gravel in the dredger, suck gravel in the course of rivers or lakes, delivering slurries in mining, explosive sludge in metal smelting.( type znh pumps are of high-head ones ) 2. Sludge dredging pump are widely used to dredger and dam in the rivers, ports and wharf over our country, such as changjiang river, huanghe river, liao river, and zhujiang delta. And also widely used abraoad, such as middle east, europe.
Capacity:220-1000 m3/h Head:13-50m Speed:500-1000 r/min Efficiency:45-65 % NPSH:3-7.5 m Max diameter of flowed particel:178 mm Application:Dredging Cyclone Slag Cranulation Suction Hopper Mill Discharge Sand Reclamation
Metal: Bowl,Door,Back,Liners,Impellers:A05:23~30% A07:14~18% A12:30% A49:27~29%A33:33~37% Chrome White Iron Expeller&Expeller Ring:A05 23~30% High Chrome Iron G01: Grey Iron Stuffing Box:A05 23~30% High Chrome Iron G01: Grey Iron Frame Plate,Cover Plate,Base,Bearing housing:G01 Grey Iron D22 Ductile Iron The pump suitable for dredging,mining and metal smelting blast slag delivery.
