32.5% Urea + 67.5% DI water 10L/ Drum 2 Drums/ Corrugated Carton ISO 22241 IATF 16949 ISO 9001 ISO 14001 OHSAS 18001
Automobile diesel fuel (EN 590) Grade E (winter), recommended for use at ambient temperatures up to minus 15 C (limiting filterability temperature). Diesel fuel EN 590 (EN 590) Grade E is obtained from petroleum refined products and is intended for use as automotive fuel for diesel engines of cars and trucks. Diesel fuel meets the requirements of the international standard EN 590/2000 and is characterized by a low content of sulfur, aromatic hydrocarbons and a high cetane number, which leads to an overall reduction in sulfur oxide emissions, a decrease in the amount of particulate matter in exhaust gases and the formation of deposits in the fuel system of cars and heavy vehicles, reducing exhaust smoke and is the key to good starting properties of the fuel during cold start of the engine. The oil refining industry produces diesel fuel in accordance with GOST 305-82 of three grades: L - summer, used at ambient temperatures above 0 C; 3 - winter, used at temperatures up to -20 C (in this case, winter diesel fuel should have a stagnation
Light Cycle Oil (LCO) is a diesel boiling range product from Fluid Catalytic Cracking Units (FCCUs). FCCU is responsible for the production of petrol, LPG and Light Cycle Oil (LCO). There are various ways of economically upgrading LCO, which include hydrotreating, high pressure hydrocracking for full conversion of LCO into Naphtha and a more optimized partial conversion hydrocracking process. It can be used in susch industries as Agrochemical, Crude Oil, Petrochemicals, Petroleum Products.
FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47
(EN590) 10 PPM/50PPM Origin: Kazakhstan The detailed specification: Meets all International Standards Total Spot quantity order: 100,000MT The price and discount: - FOB ROTTERDAM AND CIF OTHER COUNTRY: DISCOUNT $50 PER MT FROM NWE PLATTS - CIF ASIA: DISCOUNT $70 PER MT FROM SINGAPORE PLATTS Shipment: - TANK TO VESSEL ROTTERDAM PORT or DESTINATION PORT as per conditions in Seller`s FCO Payment terms: As agreed per attached Seller`s SCO / FCO and PROCEDURE, via MT103 Payment Procedure: According to the terms of the contract, to be mutually agreed upon by Buyer & Seller. Inspection: SGS for Quantity and Quality, at embarkation port, DIP TEST
The Volvo Penta TAMD41M-A is a reliable and powerful marine diesel engine. Here are some key specifications and features: Engine Type: 6-cylinder, 4-stroke, direct-injected, turbo-charged marine diesel engine with aftercooler1. Power Output: 147 kW (200 hp)1. Cooling System: Freshwater cooled exhaust manifold and oil cooler1. Alternator: 14 V/50 A1. Other Features: Flexible front engine mounting, wet type exhaust elbow, lubrication oil filter, and turbo-charger
Description: Automotive Gas Oil (AGO), commonly referred to as diesel fuel, is a vital component in the automotive industry, powering a wide range of vehicles, from cars and trucks to buses and heavy-duty machinery. Renowned for its efficiency, reliability, and versatility, AGO is the fuel of choice for millions of drivers worldwide. Key Features: High Energy Density: AGO boasts a high energy density, providing exceptional fuel efficiency and optimal engine performance, whether cruising on the highway or hauling heavy loads. Clean Combustion: Engineered for clean combustion, AGO minimizes emissions of harmful pollutants such as sulfur oxides (SOx), nitrogen oxides (NOx), and particulate matter (PM), ensuring compliance with environmental regulations and reducing environmental impact. Cold Weather Performance: Formulated with additives to enhance cold flow properties, AGO remains fluid even in frigid temperatures, facilitating reliable engine starting and smooth operation in cold climates. Engine Compatibility: Compatible with a wide range of diesel engines, including modern high-pressure common rail (HPCR) systems, AGO delivers consistent performance and reliability across various vehicle types and models. Long-Term Stability: Engineered for long-term stability and storage, AGO maintains its integrity and performance characteristics over time, minimizing fuel degradation and ensuring reliable operation even during prolonged storage periods. Target Audience: Private Vehicle Owners: Ideal for owners of diesel-powered cars, SUVs, and pickup trucks, AGO provides reliable fueling solutions for daily commuting, road trips, and recreational activities. Commercial Fleets: Trusted by businesses operating delivery vans, trucks, and buses, AGO offers cost-effective fueling options for fleet management, logistics, and transportation services. Construction and Agriculture: Essential for heavy equipment and machinery used in construction, agriculture, and mining, AGO powers tractors, excavators, and other diesel-powered vehicles with exceptional performance and reliability. Experience the Power and Efficiency of Automotive Gas Oil (AGO) for Your Driving Needs!
Adblue aus 32 diesel exhaust fluid.
Aqueous Urea Solution or diesel exhaust fluid (DEF) reduces harmful NOx emissions from diesel engines and enable diesel passenger cars to comply with the Euro 6 exhaust standard. AdBlue, DEF & ARLA 32 are the global alternative brands for Aqueous Urea Solution products (AUS). Our supply of Aqueous Urea Solution is mainly directed to our clients in Europe.
The PAL-Urea is specifically designed to measure the Urea concentration of Diesel Exhaust Fluid (DEF), also known as AdBlue* in Europe. Already proven in Europe as the only reliable, go-to instrument for easy and accurate checks, the PAL-Urea is now available in North America in time for new 2010 EPA regulations on diesel emissions.DEF needs to have a 32.5% Urea concentration in order to work effectively in SCR engines. Make sure that the DEF that comes out of your pump and into your tank is pure in quality and safe from potentially harmful additives by using the only digital hand-held refractometer already trusted by European consumers.* AdBlue is a trademark of VDA
We are a trusted supplier of high-quality Diesel Exhaust Fluid (DEF), also known as AdBlue, serving clients globally with a strong commitment to product quality and reliable service. Our DEF product is meticulously formulated to meet the stringent requirements of modern diesel engines, helping to reduce emissions while promoting fuel efficiency. Currently, we supply AdBlue to international markets across Asia, the Middle East, and beyond, and weâ??re eager to expand our reach with new distribution partners. Product Overview: Diesel Exhaust Fluid (DEF / AdBlue) Composition: Precisely blended with 32.5% high-purity urea and 67.5% deionized water. Quality Assurance: Manufactured to meet ISO 22241 standards, ensuring optimal compatibility with all diesel engines using SCR (Selective Catalytic Reduction) technology. Environmentally Friendly: Contributes to significant reductions in nitrogen oxide (NOx) emissions, in line with international environmental regulations. Packaging Options We offer a variety of packaging solutions to suit different market requirements: 1000 liters â?? IBC totes 210 liters â?? Drums, with or without pallet 20 liters â?? Containers, with or without pallet Minimum Order Quantity: 1 container Pricing & Terms We offer competitive pricing while maintaining top-quality standards. Upon receiving your quantity and packaging preferences, we can provide a customized quotation to meet your needs. Logistics and Delivery Our logistics team ensures efficient shipping with timely delivery to your location. For international orders, we offer CIF (Cost, Insurance, and Freight) terms to your designated port. Why Choose Exodus Universal Pvt Ltd? Proven Quality: AdBlue supplied to multiple international markets with proven quality and performance. Competitive Pricing: Cost-effective solutions without compromising on quality. Reliable Supply Chain: Streamlined logistics and dedicated support for consistent supply and timely deliveries. Responsive Support: Our team is here to address your needs and ensure smooth order processing and delivery. We would be delighted to discuss how we can serve your DEF requirements. Please let us know your interest, and we will gladly prepare a detailed quotation based on your specifications.
Diesel Generator Set B3.3 Series 50-62.5 kVA, 40-50 kWe Prime 1. Latest Technology and Unmatched Performance The Cummins B3.3 Series rugged engine and world class Stamford alternator powered diesel generator set Advanced in-cylinder technology to meet latest emission norms without any after-treatment device. Smart aesthetic and superior finish Compact in size with optimum power-to-weight ratio 2. Environment Friendly Power Class defining technology engine is designed to meet stringent exhaust emission tests as per revised MoEF norms, thus offering environment friendly power. The Cummins diesel generator sets are available with the lowest noise levels in its range 3. Lowest Operating Cost and Comprehensive Warranty Highly reliable and durable product All elements are designed to work together to maximize efficiency even at part loads, offering the advantage of lowest operating costs. 500 Hours/ 1 year service interval Industry acknowledged best-in-class comprehensive warranty on the entire package including rubber components 4. Single Source Power Assurance All the major components the engine, alternator, control system and canopy are designed, manufactured and tested by Cummins India. Best and largest customer support network in India, capable of providing round-the-clock service and spares support All these things put together, Cummins offers you SINGLE SOURCE POWER ASSURANCE
Diesel Generator Set X1.3 Series 7.5-15 kVA, 6-12 kWe Prime 1. Latest Technology and Unmatched Performance The Cummins X1.3 series rugged engine and world class Stamford alternator powered diesel generator set Advanced in-cylinder technology to meet latest emission norms without any after-treatment device. Best in class transient response High altitude capabilities Smart aesthetic and superior finish Compact in size with optimum power to weight ratio 2. Environment Friendly Power Class-defining technology engine is designed to meet stringent exhaust emission tests as per revised MoEF norms, thus offering environment-friendly power. The Cummins diesel generator sets are available with the lowest noise levels in its range 3. Lowest Operating Cost and Comprehensive Warranty Highly reliable and durable product All elements are designed to work together to maximize efficiency even at part loads, offering the advantage of lowest operating costs. 500 Hours/ 1 year service interval Industry acknowledged best-in-class comprehensive warranty on the entire package including rubber components 4. Single Source Power Assurance All the major components the engine, alternator, control system and canopy are designed, manufactured and tested by Cummins India. Best and largest customer support network in India, capable of providing round-the-clock service and spares support All these things put together, Cummins offers you SINGLE SOURCE POWER ASSURANCE
Diesel Generator Set QSL9 Series 275-320 kVA, 220-256 kWe Prime 1. Latest Technology Products with Global Cummins Platform The Cummins QSL9 series heavy-duty engine and world-class Stamford alternator-powered diesel generator set Class defining Quantum engine technology with fully integrated subsystems Full Authority Electronic Engine Advanced in-cylinder technology to meet latest emission norms without any after-treatment device Smart aesthetic and superior finish Compact in size with optimum power to weight ratio 2. Lowest Operating Cost and Comprehensive Warranty Highly reliable and durable product All elements are designed to work together to maximize efficiency even at part loads, offering the advantage of lowest operating costs 500 Hours/ 1 year service interval Industry-acknowledged best-in-class comprehensive warranty on the entire package including rubber components 3 Environment Friendly Power Class-defining technology engine is designed to meet stringent exhaust emission tests as per the revised MoEF norms, thus offering environment-friendly power. The Cummins diesel generator sets are available with the lowest noise levels in its range 4. Single Source Power Assurance All the major components the engine, alternator, control system and canopy are designed, manufactured and tested by Cummins India Best and Largest customer support network in India, capable of providing round-the-clock service and spares support All these things put together, Cummins offers you SINGLE SOURCE POWER ASSURANCE
D6 : VIRGIN RUSSIAN ORIGIN First lift : 100,000,000 Gallons - 200,000,000 Gallons Contract QTY : up to 200,000,000 Gallons x 52 weeks Price NEW : Gulf Cost Platts Minus - $0.14 / $0.17 FOB : ROTTERDAM / FUJAIRAH PORT/ HOUSTON
En590 10 PPM : RUSSIAN ORIGIN AVILABLE SPOT VESSEL ALREADY IN HIGH SEA First lift. : 50,000MT 200,000 MT Contract QTY. : UP TO 600,000 MT Price. : Platts NEW Minus $40 / $50 PER MT FOB. : ROTTERDAM / FUJAIRAH PORT/ HOUSTON Commission : 50% SELLER SIDE CLOSED: 50% BUYRT SIDE OPEN
Description by Manufacturer ENGINE Engine Type V6 Bore x Stroke 3.63 x 3.00 in. (921 x 762 mm) Displacement 186 CID (3,046 cc) DIMENSIONS Shaft Length 25 in. (635 mm) Weight 528 lb. (240 kg) GENERAL Propshaft Horsepower 175 HP (131 kW) Full Throttle Operating Range 5000-6000 RPM Gear Ratio / Shift F-N-R Cooling Water-cooled with thermostat & pressure-controlled The Mercury Diesel Outboard is a diesel two-stroke designed for light duty commercial patrol boat applications. The EPA certified engine joins the U.S. Department of Defense spec diesel outboard Mercury Marine released in May 2015. The Mercury Diesel Outboard features exclusive spark ignition, direct fuel injected 2-stroke technology which enables it to run on readily available ultra-low sulfur diesel fuel. SPECIFICATIONS HP: 175 HP (131 kW) Engine type: V6 Displacement: 186 CID (3,046 cc) Displacement: 3.0 L Full throttle: 5000-6000 RPM Shaft length: 25 in. (635 mm) Gearcase ratio: 2.08:1 Dry weight *Lightest model available: 528 lbs (240 kg) Bore and stroke: 3.63 x 3.00 in (921 x 762 mm) Fuel system: 2-stage Direct Fuel Injection (DFI) Cooling system: Water-cooled with thermostat & pressure-controlled Gear shift: F-N-R Exhaust system: Through prop KEY FEATURES Available with a 25â?? (635 mm) center section and the 2:1 Fleet Master gearcase in both right-hand and left-hand rotation. Industry-exclusive spark ignition diesel engine. Glow plug ensures consistent, reliable cold starting. Commercial patrol boat models meet EPA emissions standards. Cylinder heads designed specifically for combusting diesel fuel. High performance cylinder liners for maximum horsepower and optimal engine running quality. Fuel/air mixture is injected into the combustion chamber at 95 psi for enhanced high rpm running quality.
Urea, a nitrogen-rich compound with the chemical formula CO(NH), plays a significant role in the oil and gas industry, Urea, also known as carbamide, is a highly soluble organic compound. It is synthesized on a large scale from ammonia and carbon dioxide and is primarily used in fertilizers, which accounts for about 90% of its global production. Chemical Properties Molecular Formula: CO(NH) Molar Mass: 60.06 g/mol Appearance: White, crystalline solid Melting Point: 133C (271F) Solubility: Highly soluble in water, forming a neutral solution Industrial Production The production of urea typically involves the following steps: Ammonia Production: Sourced primarily from natural gas (methane) through the Haber-Bosch process. Reaction with Carbon Dioxide: Ammonia reacts with carbon dioxide to produce ammonium carbamate, which is then dehydrated to form urea and water:2 3 2+ 2NH 3 +CO 2 NH 2 CONH 2 +H 2 O Diesel Exhaust Fluid (DEF): Urea is used to reduce nitrogen oxide (NOx) emissions from diesel engines. DEF, a mixture of 32.5% urea and 67.5% deionized water, is injected into the exhaust stream of diesel engines. Oil Drilling Fluids: Urea can be used in drilling mud formulations to enhance the efficiency of the drilling process. Chemical Manufacturing: Urea serves as a feedstock in the production of various chemicals such as melamine and urea-formaldehyde resins. Desulfurization: It is used in processes to remove sulfur compounds from petroleum products. Market Dynamics Demand: The demand for urea is largely driven by its use in agriculture. However, industrial uses, including those related to the oil and gas sector, contribute significantly to its market. Pricing: Urea prices are influenced by the cost of natural gas, the primary raw material, and global agricultural demand cycles and NEGOTIABLE Environmental Impact: While urea itself is not hazardous, its overuse in agriculture can lead to environmental issues such as eutrophication. Handling and Storage: Urea should be stored in a cool, dry place away from moisture, as it is highly hygroscopic. It is considered non-toxic, but proper safety measures should be followed to avoid dust inhalation or skin contact. Logistics: Efficient transportation and storage solutions are vital to maintain urea quality and manage costs. Regulations: Compliance with international and local regulations regarding chemical handling, safety, and environmental impact is crucial. Market Opportunities: Identifying and targeting markets with growing industrial and agricultural demand for urea can enhance profitability. Origin: Russia/ Kazakhstan. Contact us for more information
Being a licensed repacking and marketing agent for our parent partner, New-Blue AdBlue, we have initiated a further step towards introducing a locally manufactured AdBlue to ease the cost burden on our end consumers. Hence, local production of AdBlue commenced in 2020 and we have further reduced market prices. Under the Sub-licence agreement with the parent partner, we maintain high VDA and ISO 22241 quality standards and we market our product under your favourite brand name, ECOBLUE, which is a registered trademark under TREES (PVT) Ltd. As a further stimulus for the post-COVID economic environment in Sri Lanka, we are saving the dollar outflow while creating many job opportunities. Ecoblue AdBlue (AUS32) is the AdBlue product recommended to heavy and light vehicle segment with a concentration of 32.5% w/w. The average consumption of AdBlue is between 3-5 per cent of fuel consumption. On a smooth drive, according to tests conducted in Sri Lanka, the AdBlue consumption of a heavy vehicle is approximately at 100km/L. In addition, for domestic Euro IV and above vehicle users, we are supplying a handy 2L can which would be more than enough for a city-run vehicle. Easy to store in your garage or the vehicle itself.
For latest pricing Enquiry, Please contact us on our email and contact details Light Cycle Oil (LCO) is a diesel boiling range product from Fluid Catalytic Cracking Units (FCCUs). FCCU is responsible for the production of petrol, LPG and Light Cycle Oil (LCO). There are various ways of economically upgrading LCO, which include hydrotreating, high pressure hydrocracking for full conversion of LCO into Naphtha and a more optimized partial conversion hydrocracking process. It can be used in susch industries as Agrochemical, Crude Oil, Petrochemicals, Petroleum Products.
