* No upfront payment Russian Origin Rate / MT: Ask Min. Order Qty : 500,000 BBLS / Month Max. Supply Capacity : 5,000,000 BBLS / Month Delivery: CIF ASWP With Rolls & Extensions Inspection: SGS (At sellers expense at Loading Port & Buyer expense at discharge port) PAYMENT INSTRUMENT: SBLC/MT76 - 0, DLC/MT700 - MT 799 BLOCK FUNDS PAYABLE 100% BY TT/MT103 AT DISCHARGE PORT 5/FIVE DAYS LATE AFTER CIQ /SGS INSPECTION LOADING PORT: Vladivostok/Novorossiysk Port. PERFORMANCE BOND (PB): 2% PB to be issued by Sellers Bank in favor of the Buyer. COMMISSION: PAID BY THE SELLER ACCORDING IMFPA SCO / Procedure / Rate : To be provided Upon request
D2 Gasoil Gost 305-82 D2 is a refinery abbreviation for Gasoil. It is the second distillate from the crude, and can be used without reformers and additives. This is gas oil that is the second distillate that is obtained through the processing of crude oil. Reformers and additives are not required to make use of this fuel. The version of D2 that has lower sulphur content is GOST 305-82 and it is the presentation of this to the market that has helped in a major reduction in pollution in many cities. GOST 305-82 GOST 305-82 is D2 with lower sulphur content. GOST is a variant of Gasoil and D2 that is in line with ISO industry standards with a sulphur content of 0.02% max. This is known as Ultra Low Sulphur fuel. Low sulphur fuel is that with 0.2% sulphur content. The GOST variant for D2/Gasoil is GOST 305-82 and specifies now a sulphur content of 0.02 MAX which is according to the ISO standard. Specifications for Gasoil D2 L-0.02/62 / GOST 305-82 Cetane index, min 45Distillation, degrees C 50% max 280Distillation, degrees C 99% (final biling point) max 360Kinematic viscosity at 20 Deg C, mm2/c (cst) 3.0 to 6.0Sulphur, max % 0.02Hydrogen Sulphide AbsCopper Strip Test PassesWater Soluble Acids and Alkalis AbsActual gum content, mg/100cm3, max 40Acidity, mg/100cm3 of gasoil, max 5Iodine number, g/100g, max 6Ash, % max 0.01Cokability of 10% residue, max. 0.20Filtration Coefficient, max. 3Sediments AbsWater AbsDensity at 20 Deg C, kg/m3, max 0.86
Origin - Azerbaijan MOQ: MOQ: 10,000 Metric Tons per Month MAX: 500,000 Metric Tons per Month Shipping Inspection - SGS or equivalent at the loading port Next steps - If the above sounds good, let's discuss and we can get a more precise quote based on your exact requirements.
We, ALMA INTERNATIONAL TRADING FZE, are able to supply DIESEL-GAS OIL L0.2-62 GOST 305-82 (D2) as below: DIESEL-GAS OIL L0.2-62 GOST 305-82 (D2) SHIPMENT: CIF FUJAHIRA /FOB ROTTERDAM -HUSTON ORIGIN: RUSSIAN or EUROPEAN PRICE QUOTE: ON REQUEST BY EMAIL ONLY MIN QTY: 20,000.00 MT MAX QTY: 900,000.00 MT Please read carefully before making a request. Information on our company policy regarding quotes. We at Alma International Trading require a Letter of Intent (Loi) from the end purchaser before we can provide a detailed price quote. Once we receive the Loi, our team will promptly review it and provide you with an accurate and comprehensive price quote. We do not respond to emails and phone calls to receive information without a written request with the final buyer's details. Important Notice Regarding False Documents If the selling company receives any false documents from the buyer or their intermediaries, we will take swift and decisive action. It is our duty to ensure the integrity and legality of all transactions we engage in. In the event that false documents are presented, we will not hesitate to report the matter to the local police. Furthermore, we will elevate the issue to INTERPOL and the International Chamber of Commerce. Our aim is to protect the interests of all parties involved and maintain a safe and transparent business environment. We expect all transactions to be conducted in an honest and professional manner. Thank you for your attention to this matter. Best regards, ALMA International Trading FZE LLC
D2 GAS OIL L-0.2-62 GOST 305-82 Quantity: 5,000 Metric Tons - 100,000 Metric Tons Trial lift Quantity: 200,000 Metric Tons â?? 300,000 Metric Tons per Month x 12 Months Price: USD 240 Gross / USD 230 Net per Metric Tons Destination port: Any Safe World Port Delivery Terms: C.I.F Commission: USD 5 Buyer side / USD5 Seller side
Products - German Origin - Product List With Pricing Details Refined/produced In Germany, Not Re-Documented Category A (AVIATION KEROSENE) 1.Jet Fuel A-1 2.Jet Fuel TS-1 Category B (D2/EN590) 1.Diesel 10 PPM (Gasoil 0.001%S) 2.Diesel 50 PPM (Gasoil 0.005%S) 3.Diesel 500 PPM (Gasoil 0.05%S) 4.Diesel 1000 PPM (Gasoil 0.1%S) 5.Diesel 2500 PPM (Gasoil 0.25%S) Category C (PETROL) 1.Unleaded Gasoline RON 92 2.Unleaded Gasoline RON 95 3.Unleaded Gasoline RON 97 Category D (D6 RESIDUAL FUEL) 1.Fuel Oil 3.5% 180 CST 2.Fuel Oil 3.5% 380 CST
RUSSIAN ORIGIN DIESEL GAS D2 OIL GOST 305-82 Minimum Quantity: 50,000 Metric Tons First Trial Maximum Quantity: 500,000 Metric Tons x 12 Months FOB Price: Gross USD $220.00 / Net USD $ 215.00
D2 GOST 305-82 CIF USD340
D2 gost 305/82
COMPONENT UNIT MIN. MAX. Density@ 20 deg C Kg/m3 0,840 Colour 1.1 Flash point, PMCC deg C ( C ) 66 69.0 Kinematics viscosity @20 deg C C ST 3,0 6,0 Pour point deg C ( C ) (*) -10,0 Cloud point deg C ( C ) (*) -5,0 Mercaptan sulphur 0,004 Acidity, mg / 1000 cm3 5 Iodine number g/100g 6 Ash %wt 0,01 Total Sulphur %wt 0,005 0,02 Copper corrosion 3 hrs@50 deg C (typical) 1 A CCR on 10% Residues %wt 0.20 Cetane index 45 Distillation range : - 50% Recovered Volume deg C ( C ) 280 - 90% Recovered Volume deg C ( C ) 365.7 - Bacteria MBC Fibre / it 500 - Bacteria CFU Fibre / it 1000 (*) Summer from March to October (PP - 5.0 degrees C) Summer from March to October (CP - 0.0 degrees C) Winter from November to February (PP - 10.0 degrees C) Winter from November to February (CP 5.0 degrees C)
Soft Corporate Offer Attention to Buyer/buyer Representatives. Here by Issue This Soft Corporate Offer With Presented Term Conditions and Confirm Our Irrevocable Corporate and Legal Responsibility, Under Penalty of Perjury That We Are Ready, Willing and Able to Supply the Below Mentioned Products Herein and Issue a Draft Contract Then Sales Purchase Agreement Upon Acceptance of Our Term and Conditions Stipulated Herein. The Term and Procedures Stipulated Herein Is in Accordance With the Term and Procedures of Procuring Oil & Gas Products From Russia Federation. Terms of Negotiation Origin: Russia Federation Performance Bond : (Pb) 2% of the First Month Shipment Value Destination Aswp Incoterms: Fob / Cif / Tto Loading Port: Novorossiysk / Primorsk / Vladivostok / Rotterdam Ports Payment Terms: Irrevocable Lc, T/t Telegraphic Transfer, Bg or Sblc Mt760, Mt103/23, Mt103 Inspection: Sgs, Ciq or Similar Insurance: Paid by Seller, Covering 110% of Shipment Value Diesel Gas D2 Oil Gost 305-82 Minimum Liftable Quantity: 100,000 Mt, Maximum 300,000 Mt Monthly Pricce Cif: Gross Usd $220.00/usd $210.00 Net Price F.o.b: Gross Usd $ 190.00 Mt Net: Usd $ 180.00 Mt Origin: Russia Loading Port: Primorsk / Novorossiysk/ Rotterdam CI DIP AND PAY FOB ACCEPTED TERMS AND PROCEDURE 1. Buyer sends ICPO with full banking details CP, Passport Copy and Company registration. 2. Seller issues CI to Buyer. 3. Buyer Sign/endorse CI within 48 hours. 4. Seller issue to Buyer following Transaction Documents: Tank Storage Receipt (TSR Valid 48 hours) Authorization to inspect (DTA Valid 48 hours) Authority to Verify (ATV) 5. Buyer upon receipt of the PPOP documents, buyer contact Tank farm for confirmation of the product and dip test within 48 hours. NOTE (BUYERâ??S FAILURE TO MAKE DIP TEST WITHIN 48 HOURS, BUYER WILL BEAR THE COST OF FURTHER EXPENSES) 6. Upon successful inspection, Buyer release payment for total product value. 7. Seller Transfer title and Trans-loading commence and issues NCNDA/IMFPA for commission payment.
PRODUCT: DIESEL D2 OIL GOST 305-82 Price CIF AWSP: Gross US $215 / Net $200 Price FOB Rotterdam: Gross US $205 / Net $190 FIRST TRIAL LIFT: 50,000 MT SUBSEQUENT TRANCHE: 500,000 MT PER MONTH X 12 MONTHS WITH POSSIBLE 60 MONTHS SUBJECT TO CONFIRMATION. QUANTITY: Min 50,000 MT / Max 500,000 MT
Ferrous: hms 1/2, used rails r50, r65. used drill pipes. nonferrous :copper cathodes, aluminium ingots a7, lead ingots, zinc ingots. minerals : iron ore, copper ore concentrate, lead ore concentrate, zinc ore concentrate, manganese ore, nickel ore. metallurgical coke, petroleum coke. steam coal. agriculture food: all grade rice, wheat, soya beans, sunflower oil, virgin olive oil. petroleum products : diesel fuel, gasoil, jet fuel ai, jet fuel 54. en500, d2, d6..
Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS
Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.
Petroalliance diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.
Automobile diesel fuel (EN 590) Grade E (winter), recommended for use at ambient temperatures up to minus 15 C (limiting filterability temperature). Diesel fuel EN 590 (EN 590) Grade E is obtained from petroleum refined products and is intended for use as automotive fuel for diesel engines of cars and trucks. Diesel fuel meets the requirements of the international standard EN 590/2000 and is characterized by a low content of sulfur, aromatic hydrocarbons and a high cetane number, which leads to an overall reduction in sulfur oxide emissions, a decrease in the amount of particulate matter in exhaust gases and the formation of deposits in the fuel system of cars and heavy vehicles, reducing exhaust smoke and is the key to good starting properties of the fuel during cold start of the engine. The oil refining industry produces diesel fuel in accordance with GOST 305-82 of three grades: L - summer, used at ambient temperatures above 0 C; 3 - winter, used at temperatures up to -20 C (in this case, winter diesel fuel should have a stagnation
5. Product Name: DIESEL D2 GASOIL GOST 305-2013 ORIGIN PEMEX Liftable Quantity: Minimum 50,000 MT Maximum 200,000 MT Trial + Contract price platts - $ 252.85 -5 = $247.85 PER MT Platt Code: AAXFD00
