Dell 19 E Series Monitor Suppliers and Manufacturers

SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".

SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".

SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".

Amaranth oil is predominantly an unsaturated oil (76%) and is high in linoleic acid, which is necessary for human nutrition. Yanez E. with coauthors [37] showed that oil extracted from Amaranthus cruentus contained 19% palmitic acid, 3.4% stearic acid, 34% oleic acid and 33% linoleic acid.

We KAPADIYA EXPO COMPANY like to offer our clients an extensive array of Fresh Mango, Mango slices, Mango pulp & Mango juice, that is highly appreciated in the market for its quality and taste. Our clients can avail from us an excellent quality of Mangoes. Keeping in mind the varied needs of our clients, we offer an entire range of different packaging options at affordable prices. Our quality examiners execute a series of tests on different parameters, to ensure the quality of the entire array. It has a rich flavor, is hygienically processed & Long shelf life. mangoes are used for the production of jams, marmalades, jelly, sweets, drinks, and fillings of baked goods. It is used in various dishes as a flavoring agent. The mango is tasty, healthy, and flavorsome. Mangoes are rich in boasting high levels of vitamins a, c, and e, soluble fiber, pectin, and unique flavonoids such as mangiferin. mangoes are among the most widely consumed fruits in the world. We provide the Indian best types of mangoes like ALPHONSO'S, KESAR, TOTAPURI, BADAMI, and many more Health Benefits of Mangoes: Mangoes contain many VITAMINS, it is gives ENERGY, SUGAR, PROTEIN & WATER to our body. Mango is high in nutrients â?? particularly VITAMIN C, which aids immunity, and iron absorption. This fruit is not only delicious but also boasts an impressive nutritional profile. Mango is a good source of folate, several vitamins B, as well as VITAMINS A, C, K & E, all of which help boost immunity. Mango contains magnesium, potassium, and the antioxidant MANGIFERIN, which all support healthy heart function

Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc). Built-in MPPT solar charge controller MAX PV Array Open Circuit Voltage: 450V Can provide the power to the load without battery Combining solar system, AC utility, and battery power source to supply continuous power Overload, short circuit and Deep discharge protection Cold start function Support USB, RS485 monitoring function Parallel operation with up to 3 units WIFI remote monitoring (optional) PV1800 PRO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is 150~430Vdc, which Can help customers make full use of solar energy.

Pure sine wave output Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc). Built-in MPPT solar charge controller MAX PV Array Open Circuit Voltage: 450V Can provide the power to the load without battery Combining solar system, AC utility, and battery power source to supply continuous power Overload, short circuit and Deep discharge protection Cold start function Support USB, RS485 monitoring function Parallel operation with up to 3 units WIFI remote monitoring (optional) PV1800 PRO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is 150~430Vdc, which Can help customers make full use of solar energy.

The HBP1800 series all-in-one energy storage solution, support 1KW 2KW 3KW output for different load appliances. It's based on the original cabinet design, stacked with solar energy storage lithium battery 960wh~3072wh, and built in battery protection system, fully retain the use of load power in applications of residential, school, commercial and public utility area. Features higher capacities for greater compatibility with more power-hungry devices, and the latest in USB-C Power Delivery capable of charging larger USB devices like laptops. Includes pre-installed solar charging optimization module that functions as a maximum power point tracker (MPPT), resulting in up to 40% faster charge times. With LiFePO4 lithium cells, known for stability and safety, monitored by a state-of-the-art battery management system that prevents overcharge, over-current, and short circuiting. Built in Multi safety protection that include short circuit, overload and over-temperture and error code reporting.

The HBP1800 series all-in-one energy storage solution, support 1KW 2KW 3KW output for different load appliances. It's based on the original cabinet design, stacked with solar energy storage lithium battery 960wh~3072wh, and built in battery protection system, fully retain the use of load power in applications of residential, school, commercial and public utility area. Features higher capacities for greater compatibility with more power-hungry devices, and the latest in USB-C Power Delivery capable of charging larger USB devices like laptops. Includes pre-installed solar charging optimization module that functions as a maximum power point tracker (MPPT), resulting in up to 40% faster charge times. With LiFePO4 lithium cells, known for stability and safety, monitored by a state-of-the-art battery management system that prevents overcharge, over-current, and short circuiting. Built in Multi safety protection that include short circuit, overload and over-temperture and error code reporting.

Basic Info. Model NO. LFP51.2-200 Electrolyte LiFePO4 Color as Picture Usage RV/ Marine/ Telecom 5g Station/ Electric Mobility Warranty 3 Year OEM/ODM Acceptable Package Carton and Pallet Lead Time 20-30 Days Dimension 800*500*185mm Transport Package Carton Specification / Trademark PUSTUN Origin China HS Code 8507600090 Production Capacity 5000 Product Description Product Description High Quality 51.2V 200ah Wall Mounted Lithium Battery The battery is a new type of energy storage product, which can be used to provide reliable power supply for various equipment and systems. It is especially suitable for applications with large power, limited installation space, limited bearing capacity and long life.Battery built-in bms battery management system, battery voltage, current, temperature and other information management and monitoring. In addition, the battery pack can balance the charge and discharge of the battery to prolong the cycle life. Multiple battery packs can be parallel to expand capacity and power, parallel to expand capacity and longer power support time requirements. 51.2V Wall mounted series Project Parameters Model 51.2V50Ah 51.2V100Ah 51.2V150Ah 51.2V200Ah 51.2V300Ah Nominal voltage 51.2V Nominal capacity 50Ah (2560wh) 100Ah (5120wh) 150Ah (7680wh) 200Ah (10240wh) 300Ah (15360wh) Dimensions (mm) 500*360*120 570*360*140/ 600*420*210 860*540*160 860*620*200 Weight About 30KG About 53KG About 80KG About 90KG About 120KG Working voltage 45---58.4V Floating charge voltage 54.4---55.2V Equalizing charge voltage 56---58.4V Charging current limiting 10A(The default charging current is greater than 55A, and the current limiting is on) It can be set through the upper computer Standard charging current current 10A 20A 30A 40A 40A Maximum continuous charging current 25A 40A 50A 50A 50A Standard discharge current 17A 33A 50A 66A 80A Maximum continuous discharge current 50A 100A 100A 100A 100A Charging ambient temperature 0~50 �ºC Discharge ambient temperature -20~60�ºC Storage ambient temperature 0~60�ºC Working environment Humidity :â?¤95; Altitude :â?¤4000 Communication mode It has the following communication ports CAN, RS485-1, RS232, RS485-2; CAN and RS485-1 are responsible for communicating with the inverter; RS232 is responsible for the communication with BMS upper computer, and is used as the battery software upgrade interface at the same time; RS485-2 is responsible for parallel communication between batteries. Power display mode LED light / display

We have good quality Used and New Laptops of all brands. Product Name Used laptops Processor CPU Series: Intel Core i7 4-generation family CPU Type: Intel Core i7 4702MQ CPU frequency: 2.2GHz Core frequency: 3200MHz Bus Specifications: DMI 5 GT / s Three cache: 6MB Core Architecture: Haswell Core / thread count: quad-core / eight thread Storage Device Memory Capacity: 4GB (4GB Ã?? 1) Memory Type: DDR3L (low voltage version) 1600MHz Hard disk capacity: 500GB Hard Description: Support the expansion turn mSATA SSD hard drive Drive Type: No built-in optical drive Display Touch screen: does not support touch Screen Size: 14 inches Aspect Ratio: 16:9 Screen Resolution: 1366x768 Screen technology: LED backlit, matte glare mask Graphics Graphics Type: Dual Graphics (fever-level graphics card + integrated graphics) Graphics chip: NVIDIA GeForce GTX 760M + Intel GMA HD 4400 Memory Capacity: 2GB Memory Type: GDDR5 Memory Interface: 128bit Number of stream processors: 768 Multimedia devices Camera: 720p HD webcam Audio System: Built-in audio chip Speaker: Built-in speaker Microphone: Built-in microphone Network Communications Wireless LAN: 802.11b/g/n wireless protocol Wired LAN: 100Mbps Ethernet card I / O interfaces Data interface: 1 Ã?? USB2.0 +2 Ã?? USB3.0 Video Interface: VGA, HDMI Audio interface: headphone / microphone combo interface Other interfaces: RJ45 (network interface), power connector Reader: Multi-in-1 card reader Input Devices Pointing device: Touchpad Keyboard Description: Full-size keyboard Power Description Battery: 6-cell lithium battery, 5900 mA Life time: 5 hours, the specific time depending on use environment Power adapter: 100V-240V 90W AC power adapter adaptive Exterior Laptop Weight: 2Kg Length: 339.2mm Width: 239.5mm Thickness: 26.4mm Shell material: composite material Case Description: Black Notebook accessories Packing list: Host x1 notebook Power adapter x1 Power cord x1 Manual x1 Warranty card x1 Shipping DOCS 1. Commercial Invoice 2. Packing list 3. Certificate of Origin 4. Bill of Loading 5. Form A/Form E 6. Other documents are according to customer's

Instant Coffee Vending Machine Model: E-20SCW Certificate: CE/RoHS/CQC/CCC Voltage/Power : 220-240V/50Hz 1600W, 100-120V/60Hz 1600W Powder Canister: 2 Pcs/1500 ml each Drinks Supply: 2 Hot Drinks (each has Hot/cold selection)+Hot/Cold water Boiler/Heater: 0.8L Operating Button: 2 smart touch buttons Display Screen : Digital Screen Resetting Work : Adjust temperature, taste, cup size by requests Water Supply(3 Ways): Bottled water on top (up-side-down) or Water from purifier Or Bottled water at the bottom by the pumping system Suitable Material : Any kinds of instant powder material Machine Size : W230xD485xH650mm Packing Size : W290xD525xH725mm N.W/G.W : 17/19 Kgs

Incoloy Alloy 890 is a high-performance corrosion-resistant alloy that belongs to the chromium-nickel-molybdenum series of alloys. It is mainly composed of nickel, chromium, molybdenum, iron, and copper. This alloy has excellent corrosion resistance in various corrosive environments such as acids, alkalis, and salt solutions. Incoloy Alloy 890 offers high mechanical strength and toughness, good weldability, and ease of fabrication. It is resistant to stress corrosion cracking, pitting, and crevice corrosion, making it suitable for use in harsh and demanding applications in industries such as chemical processing, oil and gas, and marine engineering. The chemical composition of Incoloy Alloy 890 typically includes 26-30% nickel, 19-23% chromium, 4-5% molybdenum, 1.5-3% copper, 0.3% maximum carbon, 2.0% maximum manganese, and 0.5% maximum silicon. It may also contain small amounts of other elements such as nitrogen, phosphorus, and sulfur. In terms of mechanical properties, Incoloy Alloy 890 has a tensile strength of 620 MPa and a yield strength of 300 MPa at room temperature. Its elongation at break is 50% minimum. The alloy also has good impact strength and fatigue resistance at both room temperature and elevated temperatures. Incoloy Alloy 890 can be heat-treated to enhance its mechanical properties. Annealing at 1093-1204�°C for 30 minutes per 25mm of thickness followed by rapid air cooling can improve the alloy's toughness and ductility. Solution annealing at 1093-1177�°C followed by rapid water quenching can improve its corrosion resistance and high-temperature strength. Overall, Incoloy Alloy 890 is a versatile and high-performance alloy that can withstand corrosive environments and harsh operating conditions. Its excellent properties make it suitable for use in various industrial applications where high strength and corrosion resistance are required. The following are the execution standards of Incoloy alloy 890 in various countries: US: AMS 5837, AMS 5598, AMS 5666, AMS 5839, ASTM B366, ASTM B408, ASTM B425, ASTM B564, ASTM B751, ASTM B775, ASTM B829, UNS N08890 Europe: EN 10095 Germany: DIN 17742, DIN 17750, DIN 17754 UK: BS 3076 Japan: JIS G4902 China: GB/T 14992 We can provide the following the form:Incoloy alloy890 coil; Incoloy alloy890 strip;Incoloy alloy890 plate; Incoloy alloy890 sheets; Incoloy alloy890 tube; Incoloy alloy890 pipe;Incoloy alloy890 flat; Incoloy alloy890 bar GB:GH89/JIS:G4303/UNS:N008904/W.Nr:1.4539 Manufacture of chemical equipment such as heat exchangers, reactors, and evaporators. Applications in the petroleum extraction and refining industry, such as drill bits, casings, pumps, and valves. High-temperature components in the aerospace industry, such as turbine disks, turbine blades, and combustion chamber components in jet engines. Reactors and equipment in the pharmaceutical industry, as well as other equipment and components in high-temperature and corrosive environments.

Warranty(Year): 1-Year Display Ratio: 16:9 Display resolution: 1920x1280 Port: 2*USB3.0 Series: For Business Hard Drive Type: SSD Graphics Card Brand: Intel Operating System: Windows 10 Feature: Backlit keyboard Video Memory Capacity: Main memory allocated memory Thickness: 18 - 20mm Processor Main Frequency: 2.80GHz Video Card: Intel UHD Graphics 630 After-sales Service: Call Center and on-line Technical Support Products Status: Used Screen Size: 15.6 Processor Type: Intel i9 Graphics Card Type: Dual Dedicated Graphics Card Brand Name: Dell Place of Origin: South Africa Keyboard language: English PPI: 132 Refresh Rate: 65HZ Cooling System Type: Cooling fins Type: Ultraslim Memory Capacity: 32GB Use: For Business Gaming keyboard: anti-ghosting Supply Ability Supply Ability 500 Ton/Tons per Week Packaging & delivery Packaging Details Bulk loading Port DHL / TNT / UPS / HKEMS / FEDEX / Picture Example: package-img Lead time: Quantity(units) 1 - 200 >200 Lead time (days) 7 To be negotiated