D4 (Octamethylcyclotetrasiloxane)Cas: 556 67 2 Suppliers and Manufacturers

FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47

Acetylated starch, E1420 in the E number scheme of food additives, is a modified starch. These are not absorbed intact by the gut, but are significantly hydrolysed by intestinal enzymes and then fermented by intestinal microbiota. E number: E1420 (additional chemicals) CAS Number: 9045-28-7 EC Number: 618-556-3

Caustic Soda Flakes Caustic Soda Pearls / Bead / Prill / Granule Caustic Soda solid Molecular formula: NaOH Molecule Weight: 40 H.S code: 28151100 CAS: 1310-73-2 UN number 1823 Dangerous Class 8 We use rich natural gas resources and its strategic of liquid alkali procurement, storage, transport conditions, gradually formed transportation and sale of liquid alkali, production and sales base Specifications(Caustic Soda Pearls 99%min): 1. Item: STANDARD 2. NaOH: 99% 3. Na2CO3:0.5%max 4. NaCL:0.03%max 5. Fe2O3: 0.005%max Packing in 25KG net PP bag lined with double PE inner bags. Specifications(Caustic Soda Flakes 99%min) 1. Item: Standard 2. NaOH: 99%min 3. Na2CO3: 0.5%max 4. NaCL:0.05%max 5. Fe2O3:0.005%max Packing in 25KG net PP bag lined with double PE inner bags. Specifications(Caustic Soda Solid 99%min) 1. Item: Standard 2. NaOH: 99%min 3. Na2CO3: 0.9%max 4. NaCL:0.15%max 5. Fe2O3: 0.01%max Packing in 200KG net sheet metal drugs.

We are supplier of Potassium Sulphate 100 % Water Soluble, K2O : min 50 %, Chloride : Max 1 % Use: Agriculture Fertilizer K2SO4: 92% min K2O: 50% min Chloride: (0.5+-0.2) % Ca: (1.6 +- 0.1)% Mg: (0.09 +- 0.00)% Fe: (0.05 +- 0.01)% Na: (2 +- 0.2)% Moisture: (0.2 +- 0.01) % Melting Point: 1067 Deg Celsius pH: 3+-1 Solubility in Water: Soluble Bulk Density: 1.1 gm/cm^3 Potassium Sulphate also is known as Sulphate of Potash, is 100% water soluble source of Potassium (K) and Sulphur (S), It can be used in the greenhouse, open field for vegetables, cereals, oilseeds, lawn, turf, and nurseries

We offer Ammonium Nitrate in Granular and Crystalline forms. Ammonium Sulphate Physical State ; Powder Color : White crystalline powder Cas No. 7783-20-2 Arsenic (As) ; NMT 0.00002% Calcium (Ca) : NMT 0.001% Magnesium (Mg) : NMT 0.0005% Non-volatile substances : NMT 0.01% Active Ingredient ; (NH4)2SO4% Assay : Min 99.5% PH Value ; Min. 4.5 Chloride : NMT 0.0003% Nitrates : PNMT 0.001% Iron ; NMT 0.0002% Heavy Metals (as Pb) ; NMT 0.0002% Phosphate (PO4) ; NMT 0.0005% The primary use of Ammonium Sulphate is as a fertilizer for alkaline soils. In the soil the ammonium ion is released and forms a small amount of acid, lowering the pH balance of the soil, while contributing essential nitrogen for plant growth. The main disadvantage to the use of Ammonium Sulphate is its low nitrogen content relative to Ammonium Nitrate, which elevates transportation costs. It is also used as an agricultural spray adjuvant for water soluble insecticides, herbicides, and fungicides.

Collagen Casing, CAS no.9064-67-9, artificial sausage casing manufactured from collagen derived from the skins of cattle. With much lower cost and better higher production speeds, Collagen Casings are widely used in sausage manufacturing replacing the traditional natural casings which are mainly intestine submucosa. Edible collagen casings can be used to make breakfast links, snack sticks, hotdogs, smoked and Polish sausage, Italian sausage, bratwurst, hot links, pepperoni and a multitude of ethnic sausages. As an experienced Collagen Casing manufacturer and supplier, we has been supplying and exporting Collagen Casing for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Collagen Casing Specification INDEX SPECIFICATION Collagen 40% min (Wet Basis) Moisture 25% max Cellulose 12% max HPMC 7.0% Glycerol 5.5% Ash 3.5% max Sodium lactate 3.0% Vegetable Oil 2% max Fat 2% max Yeasts /g (25C) < 50/g Molds /g (30C) < 50/g Coliforms /g (35C) < 3MPN/g Staphylococcus aureus /g Negative E. coli /g Negative Salmonella /g Negative

Choline Chloride, CAS no.67-48-1, dry powder manufacturing process by absorbing chloride liquid on a selected carrier ( Cereal carrier, such as corn cob meal, synthetic carrier, such as silica), and then drying to a lower moisture content. Choline Chloride is an important additive in feed especially for chickens where it accelerates growth, commonly used as a choline supplement in functional food applications. As an experienced Choline Chloride manufacturer and supplier, we has been supplying and exporting Choline Chloride for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Choline Chloride Specification Choline Chloride 50% Corn CobCholine chloride content: 50% min Loss on drying: 2% max TMA: 300PPM max Particle size (20 mesh): 95% min passesCholine Chloride 60% Corn Cob Choline chloride content: 60% min Loss on drying: 2% max TMA: 300PPM max Particle size (20 mesh): 95% min passesCholine Chloride 70% Corn CobCholine chloride content: 70% min Loss on drying: 2% max TMA: 300PPM max Particle size (20 mesh): 95% min passesCHOLINE CHLORIDE 50% SILICA Choline chloride content: 50% min Loss on drying: 16-19% TMA: 300PPM max Particle size (60 mesh): 95% min passesCHOLINE CHLORIDE 60% SILICACholine chloride content: 60% min Loss on drying: 17-20% TMA: 300PPM max Particle size (60 mesh): 95% min passes CHOLINE CHLORIDE 75% LIQUIDCholine chloride content: 75% min PH: 6.5-8 Ethylene glycol: 0.50% max Trimethylamine (TMA): 300 PPM max Ash: 0.20% max Heavy metal: 0.002% max

Titanium Dioxide, E171, CAS No.13463-67-7, is a naturally occurring oxide of titanium, available as white powder. the naturally occurring oxide of titanium. It appears as a white powder and is often used as food coloring in cheese products, processed fruit, fat spreads, candy, etc. When used as a pigment, it is called titanium white. As an experienced Titanium Dioxide manufacturer and supplier, we has been supplying and exporting Titanium Dioxide for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Titanium Dioxide Specification ITEM STANDARD CHARACTERISTICS WHITE POWDER IDENTIFICATION D.PALE YELLOWISH COLOR AT HEATINGE. ORANGE-RED COLOR WITH H2O2F. VIOLET-BLUE COLOR WITH ZINC LOSS ON DRYING 0.23% LOSS ON IGNITION 0.18% WATER SOLUBLE SUBSTANCE 0.36% ACID SOLUBLE SUBSTANCE 0.37% LEAD 10PPM MAX ARSENIC 3PPM MAX ANTIMONY

Cocoa Powder CAS No.83-67-0, is a powder of cocoa beans manufactured through fermentation, available as Fine, free flowing brown powder used as food supplements to improve flavoring. Cocoa powder is also available in Alkalized form as Alkalized Cocoa powder. As an experienced Cocoa Powder manufacturer and supplier, we has been supplying and exporting Cocoa Powder for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Cocoa Powder Specification Natural Cocoa Powder 10%-12% ITEM STANDARD Appearance Fine, free flowing brown powder Colour of powder Brown to dark brown Flavour Characteristic cocoa flavour Fat content (%) 10 12 Moisture (%) 5 Ash (%) 8 Fineness through 200 mesh (%) > 99 pH 5.2 5.8 Total plate count (cfu/g) 5000 Mould count (cfu/g) 100 Yeast count (cfu/g) 50 Coliforms Not detected Shigella Not detected Pathogenic bacteria Not detected

Product name: Royal jelly powder Kinds:Royal jelly freeze-dried powder; lyophilized royal jelly powder INCI Name: ROYAL JELLY POWDER Appearance: Yellow-Brown to Red-Brown Fine Powder Purity: HDA 4%-6.5% CAS NO.: 8031-67-2 Supplier: ZHENYIBIO Royal jelly freeze-dried powder is a milky secretion produced by worker honeybees.It typically contains about 60% to 70% water,12% to 15% proteins, 10% to 16% sugar,3% to 6% fats, and 2% to 3% vitamins,salts,and amino acids.Its composition varies depending on geography and climate.10-HDA prevented wrinkles,rejuvenated skin,cured acne and helped male pattern baldness.Lyophilized royal jelly powder is a off-white powder that benefits skin.The lack of a distinct colour makes it easy to incorporate into cosmetics as lyophilized royal jelly does not need to be decolourised like pollen.It has been added to a large number of cosmetics including face creams,eye creams, hand lotions, lipsticks,cake and liquid foundations,shampoos,and nail enamels.

L-Malic Acid, E296, CAS no.97-67-6, Chemical Formula C4H6O5, food acidulent, manufacturing process through double hydration of maleic anhydride, white crystals or crystalline powder. L-Malic Acid is widely used as acidity regulator. Uses in Carbonated/ Non-carbonated Beverages, Powdered Mixes, Low-Calorie Beverages, Wines, Calcium Supplements, Confectionaries, Hard Candy, Chewing Gum, Acid-Based skin cosmetics,Bakery Products As an experienced L-Malic Acid manufacturer and supplier, we has been supplying and exporting L-Malic Acid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. L-Malic Acid Food Grade Specification DESCRIPTION White crystals or crystalline powder, fairly hygroscopic, dissolving easily in water and alcohol. Chemical Name L-hydroxy butanedioic acid Molecular Formula C4H6O5 Structural Formula Molecular Weight 134.09 SPECIFICATION (GB 13737-2008) Assay(as C4H6O5) 99.0% Min Specific Rotation -1.6~ -2.6 Sulfate 0.02% Max Chloride[Cl] 0.004% Max Arsenic [as As] 2mg/kg Max Heavy Metals(as Pb) 10mg/kg Max Lead 2mg/kg Max Residue on ignition 0.10% Max Clarity test Qualified Fumaric Acid 0.5% Max Maleic Acid 0.05% Max

Color - White/Yellow Melting point - 62-67 Acid value - 5.0mg/g-8.0mg/g,16.0 mg/g-23.0 mg/g Saponification value - 75.0mg/g-110mg/g Iodine value - 8.0g/100g-13.0g/100g Benzene insoluble - 0.3% 1. Cosmetics: excellent adhesion, permeability and emulsification, widely used in face cream, snow cream, lipstick, hair oil,eyebrow pencil, eye shadow, etc. 2. Food: used by food and family as barbecue oil, cooking wax, and mold release agent for processing Chinese and western dim sum and confectionery. 3. Medicine: widely used as ointment base material, Chinese patent medicine auxiliary material, soft capsule polishing. 4. Other industries: it is also widely used in the electronic industry, electric power industry, printing industry, leather industry, ink industry, oil agent industry and candle industry.

Color - White/Yellow Melting point - 62-67 Acid value - 5.0mg/g-8.0mg/g,16.0 mg/g-23.0 mg/g Saponification value - 75.0mg/g-110mg/g Iodine value - 8.0g/100g-13.0g/100g Benzene insoluble - 0.3% 1. Cosmetics: excellent adhesion, permeability and emulsification, widely used in face cream, snow cream, lipstick, hair oil,eyebrow pencil, eye shadow, etc. 2. Food: used by food and family as barbecue oil, cooking wax, and mold release agent for processing Chinese and western dim sum and confectionery. 3. Medicine: widely used as ointment base material, Chinese patent medicine auxiliary material, soft capsule polishing. 4. Other industries: it is also widely used in the electronic industry, electric power industry, printing industry, leather industry, ink industry, oil agent industry and candle industry.

IUPAC Name: (3R,4R,5R)-1,3,4,5,6-Pentahydroxyhexan-2-one Other Names: D-allulose, D-ribo-2-hexulose Appearance: White Crystal Powder CAS Number: 23140-52-5/551-66-8 Chemical Formula: C6H12O6 Molar Mass 180.16 g�·molâ??1 Melting Point 58 �°C (136 �°F; 331 K) Function of Allucose 1. Low-calorie sugar 2. No effect on blood sugar 3. Can be part of a healthy diet 4. The taste and Texture of sugar, without all the calories 5. Contributes far fewer calories (approximately 90 percent less) than sugar

IUPAC Name: (3R,4R,5R)-1,3,4,5,6-Pentahydroxyhexan-2-one Other Names: D-allulose, D-ribo-2-hexulose Appearance: White Crystal Powder CAS Number: 23140-52-5/551-66-8 Chemical Formula: C6H12O6 Molar Mass 180.16 g�·molâ??1 Melting Point 58 �°C (136 �°F; 331 K) Function of Allucose 1. Low-calorie sugar 2. No effect on blood sugar 3. Can be part of a healthy diet 4. The taste and Texture of sugar, without all the calories 5. Contributes far fewer calories (approximately 90 percent less) than sugar

Lithium hydroxide CAS No. : 1310-65-2 Other Names : lithium hydrate MF : LiOH.H2O, LiOH EINECS No. : 215-183-4 Purity : 56.5% Appearance : White Powder Application : lubricating greases, batteries etc Color : White Sample : Available Apperance : Powder Mp : 462 C Density : 1.43 Water Solubility:Water Solubility: 113 g/L (20 C) lithium hydroxide Lithium hydroxide CAS 1310-65-2 Usage 1. It is mainly used as raw material for preparing lithium compounds. It can also be used in metallurgy, petroleum, glass, ceramics and other industries. 2. It is used to make lithium salt and lithium grease, electrolyte of alkaline battery, absorption liquid of lithium bromide refrigerator, etc

Hordenine HCl, CAS No.6027-23-2, is a hydrochloride salt of Hordenine manufactured through chemical synthesis, available as white crystalline Powder used as safe nutritional supplements. Hordenine HCL powder is used by athletes, body builders. The benefits of Hordenine HCl supplement include enhancing attention, concentration and focus, stabilizing moods. As an experienced Hordenine HCl manufacturer and supplier, we has been supplying and exporting Hordenine HCl for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Hordenine HCl Specification Item SPECIFICATION RESULTS Method Characteristics Light yellow fine powder Conforms Organoleptic Odor Odorless Conforms Organoleptic Identification IR spectrum Conforms IR Assay(HPLC) NLT 98.0%~102.0% ( on dried basis) 98.8% HPLC Loss on drying 0.5% 0.32% CP2010 Ash 0.2% 0.05% CP2010 Melting point( 175 ~185 179.4 ~179.9 CP2010 Heavy metal 10ppm maximum 10ppm CP2010 Lead 2ppm maximum 0.03ppm CP2010 Arsenic 2ppm maximum 0.008ppm CP2010 Mercury 0.1ppm maximum 0.005ppm CP2010 Cadmium 1ppm maximum 0.004ppm CP2010 Microbiology Total Plate Count NMT 1000cfu/g 105cfu/g CP2010 Yeast & Mold NMT 100cfu/g 8cfu/g CP2010 E. Coli Negative Negative CP2010 Salmonellae Negative Negative CP2010 Staphylococcus Aureus Negative Negative CP2010 General Status Non-irradiated Conclusion: Conform with specification. Packaging Description: Sealed export grade drum & double of sealed plastic bag. Storage: Store in a cool dry place and keep away from strong light and heat. Shelf life: 2 years when properly stored.

DATEM, E472e, CAS No.6027-23-2, also called diacetyl tartaric acid ester of mono- and diglycerides, food emusifier, a hydrochloride salt of Hordenine manufactured through chemical synthesis. It is an ivory white powder or particle solid. DATEM has the functions to emulsify, increase stabilization, improve preservation, prolong shelf life, and protect freshness, etc. It is mainly used as food emulsifier in bread, cake, butter, hydrogenated vegetable oil and vegetable oil powder. As an experienced DATEM manufacturer and supplier, we has been supplying and exporting DATEM for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. DATEM Specification ITEM STANDARD Appearance White or off-white solid Acid Value (mgKOH/g) 68 Ester Value (mgKOH/g) 410 Heavy Metals(pb) (mg/kg) 0.1mg/kg Glycerol (w/%) 15 Acetic Acid (w/%) 15 Tartaric Acid (w/%) 13

Ferrous Lactate, E585, CAS no.5905-52-2, is a ferrous salt of lactic acid manufactured process through neutralizing lactic acid. Ferrous Lactate is widely used as acidity regulator in food, beverage, dairy product, powder drinks, baby food and bakery. As an experienced Ferrous Lactate manufacturer and supplier, we has been supplying and exporting Ferrous Lactate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Categories Preservatives Qty in 20 FCL 20000kg Min Order 1000kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC E No. E585 CAS No. 5905-52-2 HS Code 291811 Specification FCC/USP Ferrous Lactate Food grade Specification Ferrous lactate 96% .Min Loss on drying 20% .Max Chloride(CI) 0.1% .Max Iron (Fe 3+ ) 0.6% .Max Sulphate(SO 4 ) 0.1% .Max PH 5-6 Lead 1 ppm.Max Arsenic 3 ppm.Max