Trichloroisocyanuric acid (TCCA) 90% Min intro: 1. Molecular formula: C3N3O3C13 Molecular Weight: 232.44 CAS: 87-90-1 HS NO:29336922 UN NO:2468 2. Structural formula: 3. Uses: 1) water treatment: it can be used to disinfect drink water and water in swimming pool, algae-removing in circulating water. 2) Disinfection: It can be used in disinfecting dinner, food, and dishes, or used in the prophylactic disinfection of home, hotel and public place; hygiene and disease control of hospital; or used in the disinfection of silk worm, animals, birds and fish 3) Other: It can be used in anti-shrinkage finishing of wool, textile bleaching, antimoth of paper and chlorinated agent of rubber. 4. Technical Index: Appearance: white powder/granular Available chlorine: 90%Min PH (1% Aq. Solution): 2.7-3.3 Moisture: 0.5% Max Granular Size: 8-30mesh or 20-60mesh Package: 25kg/50kg plastic drum, 50kg fiber drum. 5. Product: According to the requirements of production from customers.
Focus-6200 products are kind of non-hardening and self-adhesive waterproof sealing butyl tapes. The materials are weathering resistance and fully accommodate to the surface that it attached to, with effective life up to 20 years. Main Specification (Customized size is acceptable.) 2mm thickness * 20mm width * 20mm roll length 2mm thickness * 30mm width *20mm roll length Main Color - black, grey, white Technical Data Product Series FOCUS-6200 Series Application Construction Industry Elongation - 500% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 25N/cm Tensile Strength 250KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet Advantages * Never hardening, maintain good waterproofing property with weathering resistance performance. * Excellent performance in waterproofing and sealing. * Good anti-aging performance effective life up to 20years. * Easy to apply. Applications * Provide waterproof and sealing protection forsteel structure construction. * Provide waterproof and sealing protection for door joints, window joints,roofs and air-ducts. Provide waterproof and sealing protection for sunshine rooms, light plate rooms and thermostatic chamber. * Provide repair function for leaks on surfaces of metal/plastic/glass/concrete.
Product Brief Introduction: with the largest consumption for construction and building materials. It is mainly used as enamel fluxing agent, glass opalizing agent, acid-proof clay, acid-proof concrete coagulator and wood preservative. It can also be used for insecticide. Product Hazard or Harmful Ingredients:It does not combust or explode but has corrosivity and certain toxicity. Product Physical Properties:The product is white powder crystals and basically neutral. It is difficult to dissolve in water and acid and the density is 2.37g/cm3. Product Chemical Properties:It is stable under normal temperature. It does not combust nor explode when it is heated or contacts with redox materials. Spillage Treatment Method:Simple cleaning and burying Protection Measures for Product Transport & Storage:To prevent from caking and going bad, it should be kept indoor or be covered with protection materials like canvas and free from the blazing sun. Packing :Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg/1200kg. Other Information: Anti-caking agent can be added at the request of customers. Technical Specifications Analysis items Standard Na2SiF6 99% min Loss of weight on drying at 105â?? 0.3% max Free acid (as HCl) 0.1% max Chloride (as Cl) 0.1% max Sulphate (SO4) 0.3% max Iron(Fe) 0.02% max Water-insoluble matter 0.5% max Particle size distribution Passing through 40 mesh sieve 98% min Passing through 60 mesh sieve 90% min Passing through 325 mesh sieve 25% max
To order a high standard chair mould, we have to select the mould company very carefully. Almost most of the mould company, they can make the chair mould, but we think there is seldom of the mould companies can make a good chair mould. Please ask below questions to the mould company to see if they are good or not.
Plastic chair mould Our factory was founded in 1985, and be located the "country of chinese mould" í¬í¬huangyan. The area is covered 8000 square metres, our factory specializes in the design and manufacture with experience of over ten years. Our major products injection moulds such as auto parts: instrument panel, bumper, motorcycle parts. Air-conditioners parts, refrigveratory parts. Washing-machine parts, tv cabinets, vacuum clearer etc. Especially making of air conditioners parts possesses rich experience, among our customers, there are well-known companies such as xinke, lg and chunlan. The factory is well equipped with production facilities as well as highly skilled employees, we hold our belief in the power of man and quality, we have cad/cam/cae team with fine machine facilities, cnc machining center, cnc edm ect. With good quality reasonable price, shorter deliver time and good service. Our factory is renowned both at home and abroad. The factory continously according to the standard of iso9001, producting and managing. We were followde "quality first and service are the most supreme". As aprofessional mould manufacturer we welcome challenges ahead and have our confidence in a more splendid future. Wooden box
Plastic dustbin MouldPlastic dustbin Mould Taizhou Huangyan Seaco Plastic Mould Co., Ltd. is a professional manufacturer of trashcan mould. Our services include design, mold manufacturing, product injection molding processing, assembly and other subsequent processes. Core and cavity material selection: (according to customer needs), our professional advice: pre-hardened steel: P20 (1.2311), P20 + Niâetc; hard steel: H13 (1.2344) / NAK80 etc. Stainless steel: ASSAB Stavax â?¦Wait Mold base selection: (according to customer's needs), we recommend customers use Longji standard mold base, the material is S50C or P20 Core cavity hardness requirements: pre-hardened steel: HRC 30 ~ 32 + -1 * heat-treated steel: HRC 50 ~ 52 + -1 * Core demoulding: (according to product demand). Common methods: motor, cylinder, demoulding plate, thimble ... etc. Mould accessories: DME / HASCO standard parts. Surface treatment: According to product requirements, conventionally include skin texture and polishing; Mold life: (depending on material grade), ideally, 1. pre-hardened steel, minimum. 20 ~ 300,000 molds; 2. hard / heat-treated steel: 60 ~ 800,000 molds. 3. stainless steel: 1000000 molds. Runner: 1. Cold runner 2. Hot runner 3. Cold runner + hot runner Delivery time: 80 ~ 90 days Packaging: standard wooden box packaging Production: Injection production, follow-up process. Matters needing attention in plastic trash can mold design 1. The material is usually PP, the appearance is smooth polished 1500 #, and the appearance is printed by roller. 2. Because the plastic trash can is relatively deep, the product must be ejected normally during mold opening, and there must be no ejection mechanism. 3. Can adopt the style of gas cap, or the style of push plate, demoulding by the pull rod. 4. Back mold inserts usually use inserts. 5. The insert of the front mold is usually also used to facilitate polishing and processing. The production requirements of plastic trash can mold. 1. Mold assembly Mold assembly is like assembly machine. Every part and screw should not make mistakes, otherwise the consequences will be quite serious, which will lead to product defects, affect production, and completely damage the mold, resulting in scrap. 2. Hot runner or cold runner In fact, this has the least impact on the quality of the mold, because the hot runner is generally designated brand, especially for some major customers. 3. Cooling water circuit Those who have die experience know how important cooling is to a die. Due to the increase of special price and labor wage, it is unimaginable that the profit brought by not reducing the attention cycle of one second in the production of products. 4. Mold maintenance Mold maintenance is mainly in the production process of maintenance and maintenance. The mold is like a car, if it is not used for a long time without maintenance, it may lead to die scrapping.
Blue drum,plastic scrap, fresh beef, fresh or chilled fish, dry fruits & nuts, edible oils, dairy & milk products, milk powder, agro products, sisal fiber, cow skin hide and a4 paper, sunflower oil, sugar, scrap metal, honey, brass scrap, murex operculum palm oil, ginger, garlic, beans, red corn, film scrap, occ paper, milk powder fertilizers, coconut peat pellets. feather meal offal meal , poultry oil, almond nut, pistachio nuts, nutella chocolate, frozen chicken ,ariel omo, wheat flour, feathers meal , offal meal , jet engine boat ,rice cosmetics products , hdpe blue drum scrap, yellow corn ,plastics recycling , cooper wire scrap aluminium ingots 99.99%, pvb film scrap ,ldpe film scrap, refined sunflower oil, animal feed ,soybeans, jrat customs ebike ,steel tire wire scrap, jeep wrangler parts & accessories, horse saddle.
Product Specification 1. Mould Material:45#, 50#, P20, H13, 718, 2738, NAK80, S136, etc. 2. Mould base:LKM, HASCO ect. 3. Machine: CNC 4. Cavity:Single/multi 5. Runner: Hot/cold 6. Design software:UG, PROE, CAD, CAXA ect. 7. Plastic material:PP, PC, PS, PE, PU, PVC, ABS, PMMA ect. 8. Mould life:300,000-3,000,000 shots Quick Details Place of Origin: Zhejiang, China (Mainland) Brand Name: Zhilian mould Shaping Mode: Plastic Injection Mould Product Material: Steel Product: Household Appliance Mould Standard: LKM,HASCO,DME (optional) Cavity Number: Single/Multiple(optional) Mold Lifetime: 300,000-5,000,000 shots CNC Machining Tolerance: 0.003 to 0.005mm Product size: As request Tooling lead time: 60 days Product Feature: Eco-Friendly Design software: PROE ,Cimtron,UG, AutoCAD,CAM,CAE Packaging Details: Wooden crate , wooden pallet Delivery Detail: About 45 days after confirm 3D of mould for T1
Fabrics sofa rattan chairs Customization Garden furnitures
The variety of plastic, paper, aluminum material based products, disposable paper cup, paper tray, paper cup fan, pe/pla coated paper cup (stock) paper, paper box, takeaway container, disposable cutlery, lollipop stick, copy paper, ncr, thermal paper, label paper, atm receipt paper roll, customized printed paper roll, art paper (glossy, matte, c1s, c2s), newsprint paper, wood free paper, offset paper, special paper, synthetic paper, security paper, grease proof paper, baking paper, glassine paper, sandwich paper, etc.pe stretch film, pvc cling film, silage plastic film, bopp film, pvc tarpaulin, pvc flex banner, pe tarpaulin, ps sheet. pp bag, pe bag, biodegradable bag, mesh bag, won and non woven shopping bag, big bag/fibc, tarpaulin, plastic compound packaging bag, pe, pet, cpp, al, ny/pa, bopp, etc based bag. paper sack, 10 kg, 20 kg, 25 kg, 40 kg, 50 kg, small pouch, handle bag, twist handles and flat handles. plastic container, plastic cup, aluminum container..
Mini Wheel Chair Application - Medical and Household Seat Back Upholstery - Nylon Push hand - with rubber hand grip and hand brake Warranty - 1 years limited lifetime Custom Services - OEM, ODM, ODM, Customize Brand, Graphic and Packing.
2Lians Recycling Pte Ltd can supply below scrap product: PP Injection Granules White Plastic Scrap MATERIAL: PP Injection Granules White CATEGORY: PP TYPE: Granules GRADE: Injection SPECIFICATION: 100% Recycled ,Injection moulding, MFI :18-22 Origin: Kuwait LOADING WEIGHT: 25 Tons FOB (USD/Ton): 1200-1400
PVC Pipe Regrind Grey Color Plastic Scrap SPECIFICATION : - no moulding and 100% from pipes scrap grey color - Strict manual sorting to separate unwanted and uncolor items - Having a drying machine which aims to maintain quality because if we use the heat of the sun it will make the PVC Regrind dirty and not bright - Washing techniques namely cold washed. - Caco3 is bellow 8% and K Value is 65 to 67 - Packing: Jumpo pag 1mt - currently stock around 10 mt and 28 mt on 20th February for grey color full pipes - filler content bellow 7% ORIGIN : Indonesia
LDPE Lump Extrusion Plastic Scrap For Sales MATERIAL : LDPE Lump Extrusion CATEGORY : LDPE TYPE : Lump GRADE : Extrusion SPECIFICATION : "The main ingredient is LDPE and the secondary ingredient is LLDPE. The grade is extruded flame retardant grade Japanese customers make pellets by mixing them with pure LDPE Ratio is 9:1 MFI 2.5" ORIGIN : Japan LOADING WEIGHT : 22 Tons FOB (USD/Ton) : 250-400
LDPE Roll And Sheet New Material Plastic Scrap For Sales MATERIAL : LDPE Roll And Sheet New Material CATEGORY : LDPE TYPE : Roll and Sheet GRADE : White SPECIFICATION : new sheet can print anything as customer demand. LDPE 60%, caco3 35%, tio2 5%. thin sheets 0.15mm ~0.2mm thick ORIGIN : Japan LOADING WEIGHT : 20 Tons FOB (USD/Ton): 400-600
Plastic packaging products, all kind laminated, non laminated shopping, carry bags, non woven bags, metalized bags, woven bags, molded products and many more as per buyers requirements. recycled / reprocessed pp mfi(polypropylene mfi) granules recycled / reprocessed pp/ppcp/bopp granules with high mfi recycled / reprocessed pvc granules recycled / reprocessed pet granules recycled / reprocessed ldpe/hdpe/lldpe granules.
Origin: Malaysia Category: HDPE Type: Recycled Pellets Color: Natural Quantity: 25 Tons Loading weight: 25 Tons Specification: HN-901 PCR HDPE Natural recycled plastic pellets (Hot Wash) Our products are ideally suited for blow moulding applications in the production of bottles. These materials consist of high-quality milk and detergent bottles, which are subject to lower levels of contamination. GRS, Reach Compliance, 100% Post consumer recycled content by SCS Global Services, ISO 9001 & ISO 14001.
Material Plastic Style Solid Box Place of Origin Guangdong, China Brand Name dongxing Model Number 605*415*95mm Logo Customer Logo
Nozzle pump,Plastic pump for lotion/for shampoo/for oil
