Size of 9 square wave polycarbonate roofing sheets
Width: 1070mm
Thickness: 0.65mm - 1.5mm
Common length: 6m
Especially, providing the length according to the individual requirements of each customer
Size of 11 square wave polycarbonate roofing sheets
Width: 1070mm
Thickness: 0.65mm - 1.5mm
Common length: 6m
Especially, providing the length according to the individual requirements of each customer
Technical characteristics of SkyLite polycarbonate awning:
* Using materials are SkyLite polycarbonate panels with UV resistance, high light transmission, sound insulation, good heat insulation.
* Negative link between the frame and the plate, minimizing the screw holes on the surface, avoiding the leak through the screw hole and high aesthetics.
Simple to transport and install, save time in construction and installation.
* Environmentally friendly, safe for users.
POM plastic possesses the same priority features as other plastic polymers, some of the highlights of the special resin:
High hardness
Bearing good
Low friction number
High resistance to abrasion
High temperature resistant
Less water intake
Has anti-static ability
Dimensional stability, little change
Less smoke burns when burning
High glossy surface
High crystallization
In addition to the priority points, POM plastic also has some limited formats such as:
Quality acid resistance and alkali
High hatch rate when changing secretions
Operation mode Heat range
MATERIAL: POM regrind black color full container available
CATEGORY: POM
TYPE: Regrind
GRADE: Black color
SPECIFICATION: 1 full container available
Origin: Tunisia
LOADING WEIGHT: 23 Ton
FOB (USD/Ton): 650$ - 850$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
1. Improves nylon water absorption and improves size stability of the product.
2. Improved nylon fire resistance to meet the requirements of electronics, electrical, communications and other industries.
3. Improved mechanical strength of nylon to achieve the strength of metal materials, metal replacement.
4. Improves nylon low-temperature resistance and enhanced resistance to environmental stress.
5. Improves nylon wear resistance to meet high wear resistance requirements.
6. Improves nylon antistatic properties to meet its extraction requirements and mechanical applications.
7. Improves nylon heat resistance to adapt to high temperature conditions such as car engines.
8. Reduce nylon cost and improve product competitiveness.
Through the above modification, high performance and functionalization of nylon composite materials are realized, thereby promoting the development of industries involving high performance and high quality.
MATERIAL : PA66 FR regrind black color
CATEGORY : PA66 FG
TYPE : Regrind
GRADE : Black color
SPECIFICATION : GF50. 1 full container available
Origin : Tunisia
LOADING WEIGHT 23 Ton
FOB (USD/Ton) : 750$ - 950$
Packaging : Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
10258 Cordless Impact Screwdriver Suppliers
Short on time? Let Cordless Impact Screwdriver sellers contact you.
Thermoplastics PS has two representatives, GPPS and HIPS. In particular, PS HIPS plastic is the most popular to many advantages and applications. HIPS belongs to the group of hard, transparent resins that are easy to create color, processed by laminating film lamination and easy laminating technology.
What is HIPS PLASTIC ?
HIPS pellet stands for High Impact Polystyrene. Polystyrene has the chemical formula Polystyrene (C8H8)n which is a long chain hydrocarbon in which alternating carbon centers are attached to the phenyl group (the name given to the aromatic benzene ring).
MATERIAL: HIPS repro pellet mixed color from yoghurt caps
CATEGORY: HIPS repro
TYPE: Pellet
GRADE: Mixed color
SPECIFICATION: Mixed color.from yoghurt caps
Origin: Tunisia
LOADING WEIGHT: 23 Ton
FOB (USD/Ton): 900$ - 1150$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
MATERIAL: PC Water bottle blue color
CATEGORY: PC
TYPE: Water bottle
GRADE: Black color
SPECIFICATION: PC water bottle,blue color.15 tons available
Origin: Tunisia
LOADING WEIGHT: 23 Ton
FOB (USD/Ton): 1350$ - 1550$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
Material : PET bottle regrind A grade
Category : PET
Type : Bottle Regrind
Grade : A Grade
Specification : Small percentage color
Origin : Japan - Kobe
Loading Weight : 20 Ton
FAS (USD/Ton) : 610$
Packaging : Jumbo Bag
Est. Shipping Time : 15, 30, 45 days
Material : HDPE milk botte washed
Category : HDPE
Type : Milk Botte
Grade : washed
SPECIFICATION : USA material,5 containers available.No label and cap,washed already
Origin : USA
LOADING WEIGHT : 18 Ton
FAS (USD/Ton) : 750$
Packaging : Jumbo Bag
Est. Shipping Time : 15, 30, 45 days
HIPS regrind from Yogurt production Waste less than 1%
Material : HIPS regrind from Yogurt production Waste less than 1%
Category : HIPS
Type : Regrind White
Grade :
Specification : Product- HIPS regrind post production from Yogurt caps Waste less than 1%
Material is post industrial , regrind .
Origin : Israel
Loading Weight : 24 Ton
FOB (USD/Ton) : 720$
Packaging : Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
PC from Baby Feeder 100% pure pc without any coating
MATERIAL: PC from Baby Feeder 100% pure pc without any coating
CATEGORY: PC
TYPE: Natural
SPECIFICATION: Separate 25 kg bag and Mark per month 78 mt 100% pure pc without any coating ,post Industrial materials
Origin: Bangladesh
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 1350$ - 1700$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
Our Commitment
We are committed to delivering in accordance with the quality given, source and licensed in the field of scrap transportation.
2Lians always for the purpose of satisfying customers on the criteria of sustainability and fairness through high work efficiency
MATERIAL: Mix color Transparent PC Industrial materials
CATEGORY: PC
TYPE: Mix color
SPECIFICATION: Separate 25 kg bag and Mark per month 78 mt Mix color Transparent PC, post Industrial materials
Origin: Bangladesh
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 1150$ - 1400$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
Our Commitment
We are committed to delivering in accordance with the quality given, source and licensed in the field of scrap transportation.
2Lians always for the purpose of satisfying customers on the criteria of sustainability and fairness through high work efficiency
POM Regrind from zipper Teeth, industry lump, industry runner
Definition of POM resin (polyformaldehyde resin): polyformaldehyde is a linear polymer without side chain, high density and high crystalline properties. According to different chemical structures in the molecular chain, there are two types of homoformaldehyde and copolymers. of both types of polyformaldehyde density, high crystallinity, melting point, but thermal stability, the treatment temperature range is narrow (about 10oC), slightly lower in acid and alkali stability; The density of formaldehyde, melting point, strength and copolymer is lower, but good thermal stability, not easy to decompose, wide range of treatment temperature (about 50oC), acid and alkali stability are good . Plastic has excellent all-round performance. Good physical, mechanical and chemical properties, especially with excellent friction resistance. It is commonly referred to as steel or strip, which is the general engineering plastic third. Suitable for reducing wear on parts, transmitters, chemicals, tools and other parts.
One of the synthetic resins, also known as polyformaldehyde resin, POM resin and steel, etc. This is a kind of white or black plastic resin with high hardness, high steel and high wear resistance. Used for gears, bearings, auto parts, machine tools, tools, etc.
MATERIAL: POM Regrind from zipper Teeth , industry lump, industry runner
CATEGORY: POM
TYPE: Regrind
SPECIFICATION: from zipper Teeth , industry lump, industry runner,Qty per month 52 mt
Origin: Bangladesh
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 650$ - 850$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
Thermoplastic PS has two representatives as GPPS and HIPS resin. In particular, PS HIPS plastic is more popular thanks to many advantages and applications. PS HIPS belongs to the group of hard, transparent resins that are easy to color, machined by suction lamination method and easy injection technology.
Common HIPS applications:
In packaging technology, it is used as a single-layer packaging for products that do not require strict antioxidant requirements.
Make coating HIPS plastic film to increase water vapor and gas resistance.
Making a printing surface to increase printing ability, making the outer plastic packaging with the ability to tear easily and create gloss.
Making bottle caps, pen cases, jewelry boxes, beer tanks, fresh food containers.
Making pharmaceutical bottles, pipes, cap for solvent containers.
Making high-frequency insulating materials, insulation clamps.
Making imitation leather sandals, textile packaging.
Pressing students' tables and chairs, pressed motorcycle details, yogurt cup, plastic candy tray.
MATERIAL: HIPS Regrind White-Mix
CATEGORY: HIPS
TYPE: Regrind White-Mix
SPECIFICATION Product- HIPS regrind post production from Yogurt caps Contamination â?? up to 2% foil metalizing (cover of the yogurt caps). Food grade material Post - industrial Sheet Extrusion & Vacuum forming
Origin: Spain
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 650$ - 850$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
MATERIAL: PC CD DVD without case, cover etc
CATEGORY: PC
TYPE: Disc
SPECIFICATION: whole disc without case, cover etc
Origin: Bangladesh
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 850$ - 1050$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
Our Commitment
We are committed to delivering in accordance with the quality given, source and licensed in the field of scrap transportation.
2Lians always for the purpose of satisfying customers on the criteria of sustainability and fairness through high work efficiency
Thermoplastic PS has two representatives as GPPS and HIPS resin. In particular, PS HIPS plastic is more popular thanks to many advantages and applications. PS HIPS belongs to the group of hard, transparent resins that are easy to color, machined by suction lamination method and easy injection technology.
Common HIPS applications:
In packaging technology, it is used as a single-layer packaging for products that do not require strict antioxidant requirements.
Make coating HIPS plastic film to increase water vapor and gas resistance.
Making a printing surface to increase printing ability, making the outer plastic packaging with the ability to tear easily and create gloss.
Making bottle caps, pen cases, jewelry boxes, beer tanks, fresh food containers.
Making pharmaceutical bottles, pipes, cap for solvent containers.
Making high-frequency insulating materials, insulation clamps.
Making imitation leather sandals, textile packaging.
Pressing students' tables and chairs, pressed motorcycle details, yogurt cup, plastic candy tray.
MATERIAL: HIPS Regrind from post consumer materials ,Yes No Fr, NO pc abs, no iron, no circuit etc
CATEGORY: HIPS
TYPE: Regrind
SPECIFICATION: Hips from post consumer materials.Yes No Fr, NO pc abs, no iron, no circuit etc. Hips per month 52 mt
Origin: Bangladesh
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 650$ - 850$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
ABS Regrind ,Yes No Fr, NO pc abs, no iron, no circuit etc
ABS has excellent mechanical properties, excellent impact resistance and can be used at extremely low temperatures. ABS has excellent wear resistance, good dimensional stability and oil resistance, and can be used for bearings under medium loads and speeds. ABS's creep resistance is greater than PSF and PC, but smaller than PA and POM. The flexural and compressive strength of ABS are poor in plastics. The mechanical properties of ABS are greatly influenced by temperature.
ABS is flammable material and belongs to HB class according to UL94 standard. ABS burns quickly when ignited, and emits a lot of toxic gases and black smoke, which is not conducive to practical application. With the advancement of science and technology and improving the quality of life, everyone's safety awareness is getting stronger. The domestic and foreign countries have put in place strict fire and flame retardant requirements for plastic materials used in automobiles, construction, home appliances, office supplies, etc., and made corresponding technology. Standards and specifications, so research on ABS flame retardants has a very important meaning.
MATERIAL: ABS Regrind ,Yes No Fr, NO pc abs, no iron, no circuit etc
CATEGORY: ABS
TYPE: Regrind
SPECIFICATION: Regrind Abs from post consumer materials ,Yes No Fr, NO pc abs, no iron, no circuit etc. Qty per month 1 container 26 mt
Origin: Bangladesh
LOADING WEIGHT: 26 Ton
FOB (USD/Ton): 750$ - 950$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
MATERIAL : PET Airbag scrap with silicon
CATEGORY : PET
TYPE : Airbag
SPECIFICATION : 2 full container available
Origin : Tunisia
LOADING WEIGHT : 19 Ton
FOB (USD/Ton) : 450$ - 550$
Packaging : Jumbo Bag
Est. Shipping Time 15, 30, 45 days
10258 Cordless Impact Screwdriver Suppliers
Short on time? Let Cordless Impact Screwdriver sellers contact you.
