Communication Interface Adapter T8153 P8153 Suppliers and Manufacturers

Product introduction: This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications. Product advantages: All-in-one design, high integration and space saving installationï¼? Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed

1 All-in-one design, high integration and space saving installation 2 Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years 3 Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability 4 Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage 5 BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range 6 CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability 7 System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell 8 Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; 9 Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed Performance characteristics 10 Accurately estimate the state of charge of the battery pack, that is, the remaining power of the battery, to ensure that the power of the battery pack is maintained within a reasonable range 11 Built-in BMS management system with comprehensive protection and monitoring control functions 12 5" LCD screen display, easy to operate, can check the temperature, voltage, working status, discharge current, dynamic and static SOC algorithm of a single cell, local display of alarm info, alarm level distinction, accurate positioning of abnormal cells 13 Main control MCU can be centrally controlled and manage peripheral settings (AC charger, inverter, solar charger) to adjust the charging current and voltage of peripheral devices according to the battery charging curve, making the system more reliable

Product Features: 1 All-in-one design, high integration and space saving installation 2 Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years 3 Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability 4 Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage 5 BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range 6 CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability 7 System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell 8 Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; 9 Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed Performance characteristics 1 Small size and light weight, Maintenance-free 2 Environmental protection and pollution-free materials, no heavy 3 Accurately estimate the state of charge of the battery pack, that is, the remaining power of the battery, to ensure that the power of the battery pack is maintained within a reasonable range 4 Built-in BMS management system with comprehensive protection and monitoring control functions 5 5" LCD screen display, easy to operate, can check the temperature, voltage, working status, discharge current, dynamic and static SOC algorithm of a single cell, local display of alarm info, alarm level distinction, accurate positioning of abnormal cells 6 Main control MCU can be centrally controlled and manage peripheral settings (AC charging module, inverter module, solar charging module) to adjust the charging current and voltage of peripheral devices according to the battery charging curve, making the system more reliable

AC to DC converter battery charger 150-1000VDC rectifier 120KW power supply Product Introductionï¼? SANDI AC/DC Charger is specially developed for DC chargers. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase, DC output voltage range from 150 to 1000VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger. Unique function High efficiency over the full load range, full load efficiency greater than 95% Wide output voltage range, 150-1000VDC, suitable for a wide range of Lithium or lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main featuresï¼? Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Wide input voltage range: 260~ 530Vac, adaptable to various power grid environments Three-phase AC input without neutral wire: Simplifies system design, eliminates the risk of excessive neutral current, and reduces system costs. Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Battery anti backflow: effectively protects the battery while ensuring reliable and safe operation of the system Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. RS485 interface (Optional)

Smartscan is 8/16 channel dedicated universal input data logger used for data logging/acquisition system. It has n output Gsm wi-fi compatibility Serial, usb & rs-485 interface for communication Firmware upgrade at user end In-built rtc for timed & event based logging at high resolution Easy to use, configurable , windows based software Applications : Cold storage in dairy & food industries Blood banks & pharmaceutical industry Hvac Oil & gas industries Weather station recording Building & energy management Process monitoring for maintenance and troubleshooting applications.

Rtd ccms is battery powered compact data logger with single input. It is reliable & cost effective digital temperature recorder mainly used in cold chain monitoring system, transportation & industrial applications. It provides real-time viewing of temperature information and has usb connectivity for data retrieval. Key features : Local data storage with 4mb memory (60, 000 samples/channel ) Usb host port for easy data retrieval Serial, usb & rs-485 interface for communication In-built rtc with variable logging interval In-built rechargeable li-ion battery (with 1 month stand time)

Smartscan : 8/16 ch universal input logger Smartscan is 8/16 channel dedicated universal input data logger used for data logging/acquisition system. It has gsm/wi-fi compatibility which makes it ideal for temperature/ humidity monitoring & logging. It comes in two types : horizontal & vertical Key features : Support universal analog & digital inputs-mv, volt, ma, tc/rtd etc. True 18 bit adc for accurate & stable reading Local data storage with 4mb memory (60, 000 samples/channel) 24vdc sensor excitation output Gsm wi-fi compatibility Serial, usb & rs-485 interface for communication Firmware upgrade at user end In-built rtc for timed & event based logging at high resolution Easy to use, configurable , windows based software

This smartplot paperless chart recorder is universal input data monitoring system with lcd touch screen colour graphical display. It is used to elaborate each input parameter in the form of various trends available like graphical trend, bar graph, numerical format & conventional analogue meter format. It comes with high capacity data storage & usb/ rs 485 communication interface. Key features : Smartplot recorder available in size of 7.1” & 10.1” 64k colours, bright & wide viewing angle tft glass with backlight Variety of trends : bar graph, numerical format, analog format & graphical trend Universal 8/ 16 inputs : rtd, tc & analog True 16 bit adc for more accuracy In-built rtc for timed & event based logging at high resolution 8mb data storage capacity (60, 000 samples/channel) In-built 24vdc self excitation output Firmware upgrade at user end Real time data acquisition & data transfer

Universal input scanner Leveraging on our vast industry experience, we have emerged as a notable manufacturer and supplier of universal input scanner. Provided scanner is manufactured utilizing quality assured components with the help of pioneering technology. Adherence to predefined industry standards, offered scanner finds best application in various industries such as blood banks, pharmaceutical, dairy and food, oil & gas for temperature and humidity monitoring. Besides, clients can avail universal input scanner from us in diverse specifications at marginal prices. 8/16 ch universal input scanner Smartscan is 8/16 channel dedicated universal input data scanner used for data monitoring system. It has gsm/wi-fi compatibility which makes it ideal for temperature/ humidity monitoring. It is available in two sizes: horizontal & vertical Key features 24vdc sensor excitation output Gsm wi-fi compatibility serial, usb & rs-485 interface for communication Cost effective & reliable dedicated universal analog & digital inputs Channel skip facility Firmware upgrade at user end Accurate results

Connector RJ45 Cable Dual-Head Network Extension of Interface Adapter GHT Cable has been specializing doing business in manufacturing of a vast cable range, including network cable, coaxial cable, power cable, HDMI cable, VGA cable, DVI cable, RCA cable, USB cable and USB products etc. Our products are selling directly throughout to all over the world with "Great Price, High Quality and Thoughtful Service

Description The Trusted communication interfaces provide the Trusted controller with an intelligent communication interfaces which act as a relay between the Trusted processor and other systems, i.e. the engineering workstation (EWS) and third party systems. This minimizes communications loading of the Trusted processor. The module has a Motorola 600 series processor and MPC106 PCI bridge/memory controller, its associated memory and glue logic. There is also a site for a PCI mezzanine card for future expansion. The module communicates with the Trusted processor via the triplicated inter-module bus (IMB). When polled by the processor, the modules bus interface 2-oo-3 votes the data from the IMB, and transmits back its reply via all three channels. The module implements communications processing under the control of the Trusted processor. Messages received from the processor or an external link are validated undergo the necessary protocol conversion and are then forwarded to their destination. An electrically isolated RS232 diagnostics serial port is provided on the front panel of the module for interfacing to the EWS. The module receives a dual 24V dc supply from the controller backplane. An on-board power supply unit provides voltage conversion for the module electronics, supply conditioning and protection. Configuration of the module is carried out using the Trusted Toolset running on an engineering workstation. Once configured and loaded into the Trusted controller, replacement modules are online educated by the TMR processor. Features Dual Ethernet and four serial ports available. Support for a wide range of communications protocols. Secure, dependable communications via high performance communications links. Trusted Operating System. Built-in hardware and software self-testing. Hot replaceable. Front panel serial diagnostics port. Module fault and status indicators. IEC 61508, SIL 3 safety applications. Provision for future system expansion.

Volvo vcads vocom 88890300 communication interface volvo diagnostic euro 6 tool Vocomcommunication unit is designed with focus on robustness and durability to withstand the tough workshop environment. èimproved led indicators èimproved quality of cables èmilitary standard on connectors èbetter liquid and dust ingress protectors mming all possible parameters ), this software need to add extra $300 for this one. Package:in carton Weight:3kg

Video character superposition module-OM708 Video character superposition module is used to make the character data stack on the video screen, so as to realize checking the real-time dynamic data in supervisory room. The module is called NE-OM708, also called OM708 module. It is often used in users' system, help to realize data information superimposed on video screen function. The OM708 module supports NTSC and PAL video system, PAL is the default.It needs to tell us which way is your choice. In addition,there is another choice should be told, it is the communication way,please choose one(from RS232,RS485 and TTL; the default is RS232 communication interface) for your order. The size of the OM708 is 57mm(L)*25mm(W),volume is small and exquisite, it is easily to applicate in user's system.By the way, as you see, it could realize to display any character content at any position on the video screen. Its parameter list as follows: OM708 module enables our users to edit and modify the character library at will with the software we provide. Users can choose where to display at any time with reduced instruction set. OM708 module has three displaying effects: setting up the overlapping backgrounds, the blinking characters and reverse video text. It can achieve the function of amplifying intergrated vedio images and driving the output of two-way vedio images. The charcater library could be upgraded with our software. It has built-in RTC(Real Time Clock). RS232/RS485/TTl/SPI/IIC communications interfaces are available but the default one is RS232. Any special needs about Video character superposition module-OM708, please feel free to tell us. We can provide customized service for you. You are welcome to ask for OM708 module's English version manual , and do not worry if you have any question about it.

Hot!!! 7 inch Hightlights: 1*super thin 7 invh tablet pc with wm8650 processor. 2*The tablet pc is equipped with 7" display that allows users to easily view documents and webpages comfortably 3*android 2.2 OS 4*High Speed Connectivity Anywhere with Wi-Fi 802.11b/g Easily functions in any connected environment with fast and complete connectivity (WiFi 802.11b/g) 1. CPU: VIA8650, High-performance 800MHZ CPU+300MHZ DSP 2. Operation system: Android 2.2 (Support Flash 10.1) 3. Memory: 256MB DDR2 4. Storage Device :2GB NAND Flash maximum capacity of 32GB tf card 5. Gravity : 4-Dimensional G-sensor 6. LCD: 7" Touch screen, 800*480 pixels 7. Network : RJ45 Cable Internet: 10/100M adaptive 8. WIFI:IEEE802.11b/g/n wireless network 9. 3G: External 3G (Support Huawei E220, etc) 10. I/O Port: 30pinUSB switch interface*1,Headphone *1, MIC*1 JACK*1, TF card reader 11. Audio: 3.5mm headphone jack 12. High-quality stereo loud speaker: Built-in microphone 13. Media File :Audio file formats supported: MP2, MP3, WAV, AAC, WMA 14. Video file: formats supported: 720p video playing, MPEG1/2/4; MJPG; H263; H264 15. Photo file formats support: JPG, JPEG, BMP, and PNG. 16. Camera :Built-in 1.3MP camera 17. Power adapter: 9V,1.5A 18. Battery :Battery capacity:1800mAh 19. Size :L198 * W127* H90mm Packaging 1 x Android Tablet 1 x USB cable 1 x Charger

System Overview: KT124 Coal Mine Dispatching Communication System is a coal mine dispatching command system developed and produced by our company using the most advanced digital communication technology. It has a fully digital PCM and various types of peripheral communication interfaces. It has a full range of coal mine production dispatching and command functions, which are suitable for large, medium and small mines, mining bureaus and their regions. The system is mainly composed of ground dispatching host, access gateway, coupler, security distribution frame, ground intrinsically safe telephone set and other equipment. It has the functions of call scheduling, scheduling call users, user calls, user emergency call scheduling, trunk tandem, forced insertion, forced disassembly, etc. Compared with the traditional dispatching system, it has the characteristics of high reliability, flexible deployment, hierarchical dispatching, integrated wired and wireless, multi-standard access, high compatibility and scalability, etc., providing guarantee for coal mine safety production.

Woodward Easygen 3000 XT Genset Controller, 12-24 V DC, IP Rating: IP20 Woodward Easygen 5000 XT Genset Controller, 12-24 V DC, IP Rating: IP20 Woodward raised the standard in genset paralleling control and power management system with the easYgen3000XT Series controllers. These controllers come with standardized software that is simple to configure, yet easily customized for individual applications. Enhanced connectivity enables fast and secure interfacing to other controls and communications systems while the enhanced hardware is a drop-in replacement for previous generation easYgen-3000 Series Controls.

UNITROL 1010 is a powerful and compact Indirect Excitation System with built-in dual channel support, advanced load sharing between machines operating in parallel, rotating diode monitoring, automatic synchronizing and several integrated communication options. UNITROL 1010 is the voltage regulator of the UNITROL 1000 family intended for small and medium synchronous generators and industrial machines. This voltage regulator is manufactured using the most advanced microprocessor technology and IGBT semiconductors allowing current output up to 10 ADC for continuous operation. UNITROL 1010 provides high performance in a wide range of temperature and vibration conditions and it is fully certified according DNV and UL standards. UNITROL 1010 has additional features in contrast with legacy versions, as for instance Ethernet, USB, data and event logger and many others. UNITROL 1010 is a compact device and is designed for excitation currents up to 10 A nominal. It supports the same interfaces and has the same mechanical footprint as UNITROL 1020.

Basic Parameters Dimensions: 201 x 99 x 35 mm Weight: 333g Adapter Input: AC 100 ~ 240 V Output: DC 24V 2.65A Display mode Segment LCD with white backlight + LED in red and green Function Introduction Charge Active, pre-charge, constant current and constant voltages are the stages of charging mode. The initial charging mode depends on the battery voltage, so active and pre-charge don't happen to every batteries. For charging mode and current, please refer to the paragraphs of charging mode and charging current on page 2 & 3. Tester will stop charging if one of the conditions below was met. 1) Remaining capacity 99% & current intensity = 0 2) Remaining capacity = full charge capacity 3) Current intensity reduce to end charge current when constant voltage charge 4) Remaining capacity reach up the set value Discharge Constant current discharge for double loads Inner load: 0 ~ 1000mA, adjustable continuously via Battery Manager External load: 0mA, 500mA, 1000mA, 1500mA, 2000mA, five gears with dip switches offered Tester will stop discharging if one of the conditions below is met. 1) Remaining capacity set value 2) Voltage set value 3) Current intensity reduce to zero Remarks: Many batteries can not measure exact current intensity, which cause an else current value appears after you set a value. However, the actual discharging current is the same with your set value. Test Testing time is 12 seconds and the purpose is to check both the charging and discharging performances. After finishing test, LED flickers with green color and LCD reports the test result. Normal: Test OK Shown on LCD Abnormal: Test NG Shown on LCD Possible causes and solutions for the abnormal: 1) Cause: battery voltage is too low to discharge Solution: try to charge the battery to raise voltage 2) Cause: remaining capacity is too full to charge any more Solution: try to discharge the battery to reduce the remaining capacity 3) Bad contact of battery connecting wires 4) Damaged battery 5) Tester trouble Capacity Correction The battery capacity value in the battery management chip will different from the actual capacity after a battery goes through many recycling cycles. It will affect the use of the battery when the difference reaches a certain degree. Capacity correction is to deep discharge a battery and then fully charge, which will correct the capacity value in the battery management chip. Remarks: Discharging current can be set via Battery Manager. Deep discharge will cause a battery losing communication with tester, so battery dropping phenomenon may happen in the discharging process if the end capacity and voltage are set too low. In such a case, active charge will make the battery work again. 50% Capacity CD50%: charge firstly, and then discharge to 50% capacity DC50%: discharge firstly, and then charge to 50% capacity Online Functions Tester can be connected with master machine via a USB port. Users can monitor, control and set parameters via Battery Manager software in the master machine. Monitoring Battery information can be monitored via three windows. 1. Home screen Battery bar and brief information can be read on home screen. 2. Battery detail information window Show smart battery data in real time and the data can be saved and printed in image format. 3. Battery graph window Voltage, current and capacity are traced in curves. Control Battery Manager can control slave machine completely. Right-click menu on the battery bar includes the related commands. Attention All the functions of charge, discharge, capacity correction and 50% capacity are comply with the charging discharging conditions, which are showed on function introduction paragraph in page 4 & 5, so parameters should be set reasonably. Especially, deep discharge will cause a battery losing communication with tester. Others 1. Active cooling 2. Active batteries of zero voltage When a battery is deep discharged, the discharge protection circuit will start up and the voltage in the battery connector will become zero voltage. In this case, an appropriate voltage should be supplied to active the battery. 3. Battery identification Battery information can be read from battery management chip after establishing communication. 4. Intelligent protection Against over-current, over-voltage, over-charge, over-heat and short circuit. 5. Fan Discharging mode: fan startup Other modes: fan startup when temperature above 48 Fan stop working when temperature below 40 6. Trouble alarm LED flickers in red color and current command stops when one of the conditions below happen. 1). There is not current for around 50 seconds when charge. 2). There is not current for around 25 seconds when discharge. 3). Charging time is above 8.8 hours. 4). Discharging time is above 9.9 hours. 5). Suitable for almost all laptop batteries, above 95% Structure Accessories 1).1 * adapter 2). 1 * USB cord 3). 1 * CD 4). 13 * connectors 5). 10 * cables 6). 10 * jumpers 7). 1 * loader Standard Export Carton