DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Protect your car paint from bird drops, scratches, stone chips, iron powder and UV Enjoy the deep gloss shine that no other product can match Good for two cars, also can be applied to motorcycles. Higher hardness levels with flexibility. Long life protection that lasts up to 5 years.
Wood Coating 1 NC Grain Filler 2 NC Sanding Sealer 3 NC Clear Lacquer 4 2K Melamine 5 Wood Guard Polish 6 Wood Stain 7 Clear Varnish 8 1K Polyurethane Wood Finish Thinners 1 Thinner-700/701/713 2 Thinner-911/999 3 Thinner-PU/D.A.A./Retarder/ EPOXY/Stoving Anticorrosives & Water Proofing Insulating Varnish
Product formation: The composition of the matrix resin, catalyst, carbon forming agent and foaming agent This product is fireproof coating for steel , this paint is made of special resin , fire retardant materials , titanium dioxide and other materials. It can prevent the heat transfer of the flame, and make time for fire extinction so as to decrease hazard loss. Product features: Protecting the steel structure from deformation, beam bending , because it lost the carrying capacity over temperature of 450-650 . If no paint, it will damage and can not continue to use. Application: 1.Please do the necessary substrate treatment such as derusting , dedusting and degreasing, and then apply the anti-corrosive primer paint such as zinc rich primer paint or epoxy mio paint. 2.Make sure the paint is fully mixed before use. 3.Please do not use this product when moisture content rh>90 or t.
Silicone Emulsion 60% is used in industrial applications such as in Rubber and plastics as release agents and lubricants, in Food trays and plastic serving dishes as release agents, in Car polishes and household cleaners to improve protection, resistance, gloss and spread ability and in Textile finishing to enhance feel, water repellency and reduce the need for ironing. Silicone Emulsion 60% is also used in Perlite, vermiculite and clay and other building materials to improve water repellency and protect against dampness. Itâ??s used in Printing and papermaking for lubrication and as an antistatic agent. Silicone Emulsion 60% used as a Release agent for industrial rubber tire plastics and casting materials; Rotary offset printing lubricant; Industrial waterproofing agent and release agent; Additives for maintenance products; Polishing agent for floors and furniture; And Leather maintenance products, etc. Silicone Emulsion 60% WC Code: 24-005-04 Sales Specification Appearance: White Liquid Odour: Characterictic Solid content (%): 60.00 �± 2.0 pH Value: 8.0 �± 1.0 Density (g/cm3): 0.953 �± 0.02 Soluble in water: Miscible Packing 440.92 LB Drum 2204.60 LB IBC Tote
Water Based Acrylic Resin Emulsions for Printing Inks & Varnishes We supply ecoprint range of water based acrylic resin for high gloss water based printing Inks and Varnishes. Our ecoprint range of acrylic resins are REACH / ROHS compliant, Formaldehyde free, APEO free, PVC free, Phthalate free and Azo dyes free.
Paint Emulsions We supply wide variety of premium quality water based emulsions for the paint industry. The emulsions are selected based on the applications depending on interior or exterior paint formulation. We also supply paint aids such as thickeners and dispersing agents which are mostly performance polymers used in manufacturing good quality water based Acrylic Paints.
Textile Emulsions We have a broad range of coating products for the TEXTILE INDUSTRY such as Textile finishing agents Strech khadi for hosiery textile printing Ready khadi for textile printing Excellent quality binders for textile printing High quality plastisols
BARILAC barrier coatings are the most suited sustainable solution to replace polycoated laminated board, waxcoated, PVDC coated etc all non sustainable alternatives. Barilac barrier coat is recommended for paper cup, trays, foodtrays, pizza boxes, ice cream cartons etc. The special product features are. - Low COBB - Good oil and grease resistance - Good Moisture Vapour Transmission rate - Good heat sealing performance - Good water resistance - Low odour - FDA compliance
Base Coat White Paint For Cars
Base Coat Black Paint For Cars
Paint Mixer
Paint Roller
Paint Brushes
We take much pride to introduce ourselves as Glorious Paints Industries an ISO 9001:2008 certified company; we are manufacturer of Industrial as well as Decorative Paints. We have one of our units at Palghar which is in very close vicinity to Mumbai where raw materials and specialty products from all over the world are easily available and which makes it easy for us to spread our business rapidly, also we have started our 2nd manufacturing unit at Poicha (R) near Vadodara. With our years of experience, sound technical know-how & proven capabilities, we are always dedicated in providing excellent consistent quality products and services, at most competitive prices. With our well equipped manufacturing and R & D facilities backed by skilled work force and qualified paint Technicians; we are able to meet every requirement of the industry. Our Products are as below : � Red-Oxide Metal Primer (Anti-Corrosive) � Zinc Chromate Primer (Anti-Corrosive) � Synthetic Aluminium Paints (Dual Pack) � Anti-corrosive Synthetic Paints (Air Drying & Stoving) � Synthetic Sealer Paints (for Castings) � Hi-Gloss/Synthetic Enamels � Ultra Set (Auto Finish) Paints � Epoxy Paints � Interiors & Exteriors Emulsion Paints � Wall Primers � Acrylic Wall Putty We also manufacture tailor made products for customized applications. Glorious is full-fledged company offering wide range of products and products for customized applications. We assure you that we try to be best in our field and determined to serve full satisfaction to our customers. Though, we are aware, that there are many fellow-manufacturers in this area; we assure our best products, services, business practices, and business ethics along with high competitive edge on our competitors. Kindly give us an opportunity to serve your esteemed organization and send us your requirements of paints so that we can offer our products at competitive prices.
MicroF_W168 is a water-based micronized polyethylene homopolymer. The average particle size of MicroF_W168 is between 5.5 and 6.0 microns, and the maximum particle size is 21 microns. Application: Top grade water-based ink, water-based wood coating, Waterborne coatings, etc; Addition quantity: about 1%, can be added directly in the water-based system; Advantage: can be directly dispersed in the water-based system; Characteristics: good storage stability, good smoothness and wear-resistant performance.
EXPORT QUALITY PRODUCT Ritver Weather Guard is a water-based paint, it appears in matt/gloss finish and is excellent paints for all weather conditions. It provides excellent protection from rain, salinity, and UV rays. Excellent coverage
Industrial Finishes & Epoxy Ps1201- Penetrating Sealer (Sb) Ps1201- Texotile Epoxy Primer Ps1301- Red Oxide Primer Ps1311- Synthetic Primer Ps1351- Synthetic Wood Primer Ps1401- Zinc Phosphate Primer Ps1471- Quick Drying Primer (Matt) Ps1501- Epoxy Primer Clear Ps1551- Epoxy Primer Ps1552- Epoxy Red Oxide Primer Ps1554- Epoxy Zinc Chromate Primer Ps1601- Etch Primer Ps1701- Epoxy Zinc Rich Primer Ps2011- Epoxy Putty Ps2401- Texoile Epoxy Compound Ps2501- Synthetic Undercoat Ps3001- Synthetic Alkyd Topcoat Enamel (Standard) Ps3005- Synthetic Alkyd Topcoat Enamel (Standard) Ps3105- Thermoplastic Topcoat (White) Ps3106- Chlorinated Rubber Topcoat PS3151- THERMOPLASTIC TOPCOAT (CLEAR) PS3201- QUICK DRYING ENAMEL PS3251- SYNTHETIC TOPCOAT CLEAR PS3261- SYNTHETIC ALKYD TOPCOAT ENAMEL (SEMI GLOSSY) PS3271- PARQUET VARNISH PS3351- SYNTHETIC ALKYD TOPCOAT ENAMEL (MATT) PS3401- ALUMINUM PAINT PS3402- ALUMINUM PAINT HEAT RESISTANCE PS3501- STOVING TOPCOAT PS3601- EPOXY FLOOR COATING PS3651- EPOXY TOPCOAT CLEAR PS3751- ACRYLIC ROAD MARKING PAINT PS3751- THERMOPLASTIC TOPCOAT PS3851- ACRYLIC 2K TOPCOAT (HB) BASECOAT METALLIC (1K) -XXXXX BASECOAT METALLIC (2K)- XXXXX ACRYLIC 2K PRIMER- XXXXX CR ROAD MARKING PAINT- XXXXX DIPPING ENAMEL- XXXXX PU BASECOAT CLEAR-XXXXX PU BASECOAT PIGMENTED- XXXXX PU TOPCOAT CLEAR- XXXXX PU TOPCOAT CLEAR (ACRYLIC)- XXXXX PU TOPCOAT PIGMENTED- XXXXX QUICK DRYING PRIMER (SG) - XXXXX PS1302 - Synthetic Red Oxide Primer Commercial THINNERS ZINC SILICATE PRIMER- XXXXX PS1302 - Synthetic Red Oxide Primer Commercial
We are a well established Paints and Coatings manufacturer more than 5 decades. Our products are well recognized and accepted both in domestic market with wide network and international market. We continuosly upgrade our technology in Research and Development using the latest knowledge and technology. Our products are Paints and Coatings with water base and solvent base for different material application and industrial application. The packaging can vary 1. Pale 4 litre in corrugated carton box 2. Pale 20/25/30kgs 3. Steel drums 250kgs We have large capacity and ISO 9001. We are backed up by experieced team-work to achieve customers expectations and satisfaction We work with trust in delivering good products with timely delivery and good quality.
Place of origin: Shanghai, china (mainland) Brand name: Xinhou Model number: Wa-200 Condition: New Product name: Wa-200 automatic powder paint spray gun Model no.: Wa-101/wa-200/lpa101 Air pressure: 0.29(3.0)mpa Painting distance: 200-250mm Nozzle size: 1.2, 1.5, 2.0, 2.5, 3.0 Operation type: Paint coating Material: Stainless steel Application: Paint spray, car painting, furniture painting Price term: Fob, cif Delivery time: One week Packaging & delivery Packaging details Pacakge: standard exporting cartons or pallets Wa-200 automatic coating paint spray gun Delivery time 7 days after payment
