We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel.
Physical Description
On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm
Chemical Composition
Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%.
Packing: Loose in container
Loading: in 20 Container
For further information, please feel free to contact us.
Steel products refer to solid straight steel products with a certain section shape and size, including wire, profile and plate, which are formed by plastic processing except pipes. It can be divided into hot rolling, cold bending, cold rolling, cold drawing, extrusion, forging, hot bending, welding and special rolling according to the production method. It can be divided into railway, shipbuilding, mining, structure and construction according to its use. According to the material can be divided into carbon steel, alloy steel and stainless steel. At the same time, these steel products can be reprocessed to form semi-finished products or finished products to meet special requirements. We can according to the customer's different needs, according to the drawings or samples for reprocessing production.
Circular steel pipe is both openings and have hollow concentric sections of steel larger than the surrounding. The specifications of steel pipes are indicated by appearance dimensions and inner diameter and wall thickness, with a wide range of dimensions from very small diameter capillary to large round steel pipe of several meters in diameter. Round steel pipes can be used for pipelines, thermal equipment, machinery industry, petroleum geological drilling, containers, chemical industry, and special uses. It can be divided into seamless, ERW, LSAW, SSAW steel pipe according to the production process.
54962 Cement Plant Use Grindings Steel Rod Huamin Suppliers
Short on time? Let Cement Plant Use Grindings Steel Rod Huamin sellers contact you.
Hollow Section steel Tube is the general name for the steel pipe other than thecircular steel pipe. Such as square, rectangle, oval,elliptical, cone, trapezoidal, spiral, etc. Different steel pipe can more adapt to the particularity of use conditions, save metal and improve the labor productivity of parts manufacturing. It is widely used in aviation, automobile, shipbuilding, mining machinery, agricultural machinery, construction, light textile and boiler manufacturing. The methods of producing different pipes are cold pulling, electric welding, extrusion and hot rolling, etc. Compared with the round tube, the different tubes generally have a larger moment of inertia and cross section modulus, and have a large bending resistance and torsion resistance, which can greatly reduce the structural weight and save steel.
We source high quality Ores and Others that are majorly used in numerous of Industries for diverse uses. The wide collection of Mineral Ores is free from impurities and rich in other essential features. Our esteemed client’s can avail the wide gamut of Mineral Ores at very pocket friendly price.
We deal in
* Bauxite ore
* Copper ore
* Lead ore
* Nickel ore
* NPI -Nickel pig iron
* Tin ore
* Zinc ore etc
We offer a wide plethora of bluish-white lustrous metal Zinc. It is brittle at ambient temperatures but is malleable at 100 to 150C. Being a good conductor of electricity it has a wide usage in numerous applications. We offer this high quality Zinc to our clients at very economical price.
Properties
Melting point : 419.5C
Boiling point : 911C
Resistivity : 5.96 micro ohm-cm at 20 C
Standard state : solid at 298 K
Color : bluish pale grey
Classification : Metallic
We are engaged in offering Special High Grade Ingots and Jumbos of about 1 M. Ton size. LME registered / Non-registered / Special High Grade Ingots and Jumbos as well as High Grade and Zamak 3 etc are offered by us.
These cast iron skulls are a by-product derived from the cast iron foundries. The byproduct is a ferrous by-product which can be utilised in an electric arc furnace to produce crude steel.
Physical Description
On visual inspection, it appears to be made up of irregular shapes.
The material is separated by magnet and screener.
Packing: Loose in container
Loading: in 20 Container
For further information, please feel free to contact us.
Stainless steel tube is a hollow long strip steel made of stainless-steel material. Because of its excellent corrosion resistance, it is mainly widely used in petroleum, chemical, medical, food, light industry, mechanical instruments and other industrial transportation pipelines and mechanical structural components. In addition, when the bending and torsion strength are the same, the weight is light, so it is also widely used in manufacturing mechanical parts and engineering structures, but also commonly used in the field of furniture decoration.
Stainless steel pipe is divided into seamless pipe and welding pipe according to the production mode, seamless steel pipe can be divided into hot rolling pipe, cold rolling pipe, cold pulling pipe and extrusion pipe, etc., cold pulling and cold rolling is the secondary processing of steel pipe; welding pipe is divided into straight welding pipe and spiral welding pipe.
Stainless steel pipes can be divided into round tubes and different tubes according to the cross-sectional shape. The form tubes have rectangular tubes, rhomboid tubes, ellipse tubes, hexagonal tubes, octagonal tubes and various cross-sectional asymmetric tubes.
It can be divided into Austenitic Stainless Steel Tube Ferritic Stainless Steel Tube Martensitic Stainless Steel Tube and Duplex Stainless Steel Tube by the type of stainless steel.
in coils
5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques
Standard
JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002
Section Shape
Round
Technique
Hot rolled
Packing
Bundle, or with all kinds of colors PVC or as your requirements
Surface Treatment
1. Galvanized
2. Transparent oil,anti-rust oil
3. According to clients requirement
Ends
Plain end
MOQ
1 Tons, more quantity price will be lower
Product Application
1. Fence, greenhouse, door pipe,greenhouse
2. Low pressure liquid, water, gas, oil, line pipe
3. For both indoor and outdoor the building construction
4. Widely used in scaffolding construction which is much cheaper and convenient
Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts.
Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section.
Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures.
Warehouse Storage
Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
Packing and shipping
Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
StandardASTMROSHAISIDINENGBJIS
LengthCustomized
Thickness 005300mm
Width Customized
Surface 2BBANO3NO4HLNO1Mirror
Material 3040Cr18Ni9A182F304SUSF30414301
Hardness 14H12H34HHO
Chemical Composition
Grade C Si Mn P S Ni Cr Mo Cu N Ti
SUS304 008
100
200
0045
0030
80100 1820
Mechanical Properties
Grade State Hardness HV Yield Strength Tensile Strength Enlongation
SUS304 ANN 200
205
520
40
14H 200250 225
550
35
12H 250310 470
780
6
34H 310370 665
930
3
H 370430 880
1130
Surfce Finish Definition Application
2B Those finishedafter cold rollingby heat treatmentpicking or other equivalent treatment and lastly by cold rolling to given appropriate luster
Medical equipmentFood industryConstruction materialKitchen utensils
BA Those processed with bright heat treament after cold rolling
Kitchen utensilsElectric equipmentBuilding construction
NO3 Those finished by polishing with No100 to No120 abrasives specified in JIS R6001
Kitchen utensilsBuilding construction
NO4 Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size
Kitchen utensilsBuilding constructionMedical equipment
HL Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size
Building construction
NO1 The surface finished by heat treatment and picking or processes corresponding there to after hot rolling
Chemical tankpipe
The properties of stainless steel are corrosion resistance, high ductility, attractive appearance and low maintenance.
Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface. Stainless steel products are safe for long-term use with excellent resistance of corrosion fatigue.
Product Specification and Steel Grade
ASTM
JIS AISI EN Mill\'s Standard
S30100
SUS301
301
1.4310
S44500
SUS430J1L
- -
Other specifications are also available up to request
Hot Rolled Strip Available Size
Width: 16.0~609.6 mm
Thickness: 2.5~10.0 mm
Available Steel Grade: 304, 304L, 316L
Surface Finish: No.1
Cold Rolled Strip Available Size
Width: 4.0~609.6 mm
Thickness: 0.1~3.0 mm
Available Steel Grade: 201, 202, 204 Cu3, 301, 304, 304L, 310S, 316L, 321, 409L, 410S, 420J2, 430, 439, 441, 444, 445
Surface Finish: 2B, 2D, BA, No.3, No.4, No.5, SB, HL
Tolerance of Width
W < 100 mm
100 mm �?�?�?�¢?�?�?�?�¦ W < 1000 mm
�?�??�?�?�?�± 0.10 mm
Grade C Si Mn P S Ni Cr Mo Cu N Ti
SUS301 015
100
200
0045
0030
6080 1618 025
Mechanical Properties
Grade State Hardness HV Yield Strength Tensile Strength Enlongation
SUS301 ANN 250
205
520
40
14H 250310 470
780
35
12H 310370 510
930
10
34H 370430 745
1130
5
H 430490 1030
1320
3
EN 490550
1275
1570
Surface Finish
Surface Finish Definition Application
2B Those finishedafter cold rollingby heat treatmentpicking or other equivalent treatment and lastly by cold rolling to given appropriate luster
Medical equipmentFood industryConstruction materialKitchen utensils
BA Those processed with bright heat treament after cold rolling
Kitchen utensilsElectric equipmentBuilding construction
NO3 Those finished by polishing with No100 to No120 abrasives specified in JIS R6001
Kitchen utensilsBuilding construction
NO4 Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size
Kitchen utensilsBuilding constructionMedical equipment
HL Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size
Building construction
NO1 The surface finished by heat treatment and picking or processes corresponding there to after hot rolling
Chemical tankpipe
54962 Cement Plant Use Grindings Steel Rod Huamin Suppliers
Short on time? Let Cement Plant Use Grindings Steel Rod Huamin sellers contact you.
