Polyacrylamide for oilfield produced by Xinhuan Water Treatment is a special chemical which is widely used in oilfield engineering. It has the characteristics of high temperature and high salt resistance, it has excellent adsorption, aggregation and gelling properties, in the oilfield treatment, not only can clean up the oil stains in the water, at the same time, it can also help the enterprise to improve the efficiency of oil extraction and production, so that it can be widely used in the construction of the oilfield since. Product Features 1ã??It can adsorb organic substances such as oil and grease and surfactants in the oilfield to form stable colloidal particles and improve the fluidity of water. This adsorption ability makes it play a key role in oilfield development. 2ã??It can gather broken oil, suspension and particles into larger precipitating bodies, thus facilitating settling and separation. In oilfield development, polyacrylamide for oil recovery can be added to the water injection, and through the interaction with the oil-water interface, it can form the conditions for oil-water separation and improve the oil recovery effect of oil wells. 3ã??It can promote the aggregation of oil and grease in the oil-bearing layer to form larger oil droplets, and improve the oil recovery rate and production of oil wells. It can improve the tension and viscosity of oil-water interface, enhance the separation effect between oil droplets and water phase, and effectively increase the oil production capacity of oil wells. 4ã??It can gelate with solid particles and fibrous polymers in water to form a stable gel structure. In oilfield engineering, polyacrylamide for oil recovery can be used to solidify sediments, strengthen drilling mud and reinforce well walls. 5. It can be used to fill oil well gaps and repair problems such as drilling difficulties. At the same time, it can also reduce the osmotic pressure difference in the extraction process and improve the oil recovery effect and production.
Anionic polyacrylamide(APAM) series products are water-soluble linear polymers synthesized with high polymerization degree, easily soluble in water, almost insoluble in benzene, ether, lipids, acetone and other general organic solvents. The anionic polyacrylamide produced by Xinhuan Water Treatment can be used as coagulant aid, retention agent, sludge dewatering agent and coagulation precipitant. Because its molecular chain contains a certain number of polar groups, it can adsorb the suspended solid particles in water, make the bridge between particles or make the particles coalesce to form large flocs through charge neutralisation, so it can accelerate the settlement of the particles in the suspension, and it has the effect of accelerating the clarification of the solution and promoting the filtration, etc. Anion Polyacrylamide is mainly used to purify drinking water and domestic sewage, purify industrial sludge and dewatering agent and coagulation and sedimentation agent. It is mainly used to purify drinking water and domestic sewage; purify industrial water and industrial wastewater; purify mine and oilfield re-injection water; purify papermaking, electroplating, electronics, dyeing and finishing, pharmaceuticals, metallurgy, coal washing, tannery and various chemical wastewater. The most suitable type of product should be selected according to the conditions and water quality of the system to be treated.
We deals in the following Chemicals :- , Cationic Surfactant , Bentonite Powder, Bentonite Lumps, Bentonite Granules, Bentonite Clay , Quartz / Silica Powder, Quartz / Silica Lumps, Quartz / Silica Granules, Quartz / Silica Grits , Mica Powder, Mica Flakes, Mica Blocks, Mica Sheets , Dolomite Powder , Barite Powder, Barite Ore , Hematite / Iron Oxide Powder, Iron Oxide ( Ferric Oxide ) , Ilmenite (Synthetic Rutile) , Fly Ash Powder , Alumina Silica ( Cenosphere ) Powder , Calcium Carbonate Powder , Magnetite, Cellulose Fibers, Cellophane Flakes, Walnut Shells
Therefore, it can accelerate the settling of particles in suspension, and has the effect of accelerating solution clarification and promoting filtration Mainly used in various industrial wastewater flocculation and sedimentation, precipitation and clarification treatment.� Such as paper and pulp wastewater wastewater treatment, mineral processing and metal smelting process wastewater treatment, steel mills and stone processing plant wastewater treatment. Contact: Sunny WhatsAppï¼?+86 19139972558 Emailï¼?Sunny@xhwtm.com Web: www.xhwtm.com;www.xhflocculant.com
Non-ionic polyacrylamide produced by Xinhuan Water Treatment is a water-soluble polymer or polyelectrolyte. Since its molecular chain contains a certain number of polar groups, it can adsorb the suspended solid particles in water, make the bridge between the particles or make the particles coalesce to form large flocs through charge neutralisation. Therefore, it can accelerate the settling of particles in suspension, and has the effect of accelerating solution clarification and promoting filtration. Mainly used in various industrial wastewater flocculation and sedimentation, precipitation and clarification treatment.� Such as paper and pulp wastewater wastewater treatment, mineral processing and metal smelting process wastewater treatment, steel mills and stone processing plant wastewater treatment.
Polyacrylamide is called as PAM for short and it is polymerized by the acrylamide monomer. PAM is a kind of linear water-soluble polymer matter. With different techniques and functional groups, products with different types of charge can be obtained, including the anionic polyacrylamide (APAM), cationic polyacrylamide (CPAM), non polyacrylamide (NPAM) and amphoteric polyacrylamide (ACPAM). The average molecular weight of PAM ranges from thousands to millions and it is the high-molecular electrolyte. It is the white power or granule, and it can be dissolved in the water easily but not the common organic solvents including the benzene, ether, ester, acetone, etc.. The aqueous solution of polyacrylamide is the thick liquid, and it is non-toxic and non-corrosive. The solid PAM is hygroscopic, and the hygroscopicity is improved with the increasing of ionic degree. Use characteristics 1) Flocculability: The PAM plays the role of flocculation for the suspended matter through electrical neutralization, bridging and adsorption. 2) Adhesivity: It has the adhesive effect based on the mechanical, physical and chemical role. 3) Resistance reducing: PAM can effectively reduce the frictional resistance of fluid, and adding a minute amount of PAM into water can reduce the resistance by 50-80%. 4) Thickening: PAM has the effect of thickening both under the neutral and acid conditions. When the pH is greater than 10, PAM can have the easy hydrolysis. Besides, the effect of thickening will be more obvious when the PAM has the semi-mesh structure.
Anionic polyacrylamide is a water-soluble synthetic polymer with negatively charged functional groups, widely used in industries and environmental applications. Its main role is as a flocculant and coagulant in water treatment processes, where it aids in the aggregation and settling of suspended particles, impurities, and solids, facilitating their removal and purification from water sources. Beyond water treatment, anionic polyacrylamide has applications in enhanced oil recovery in the petroleum industry, soil conditioning for agriculture, and enhancing particle retention and drainage in the paper and textile industries. Its versatility in improving solid-liquid separation and reducing environmental contamination makes it a critical component in various industrial and environmental processes.
Guar Gum Types Food, Feed & Pharma Grades - Various particle sizes (very coarse to very fine). - • Various hydration rates (very slow to very fast). - • Various viscosities (1% solution in water = 50 cps to 7000 cps). - • Special deodourised grades. - • Special low microbiological count grades. Technical Grades Straight Guars: - Various particle sizes (very coarse to very fine). - Various hydration rates (very slow to very fast). - Various viscosities (1% solution in water = 50 cps to 8000 cps). - Special good Dry-Flow (Free-Flow) Guars. - Special Anti-Dusted Guars. Modified Guars and Guar Derivatives: - Fast hydrating / High Viscosity / Diesel Slurriable (particularly suitable for oil, gas and other deep well drilling and EOR operations like polymer flooding / fracturing), - Borated. - Reticulated. - Oxidised. - Depolymerised. - High water absorbance capacity. - Carboxymethyl (Anionic). - Hydroxypropyl (Nonionic). - Hydroxypropyltrimethyl chloride (Cationic). - Hydroxypropyltrimethyl chloride Hydroxypropyl (Cationic, double derivative). - Special good Dry-Flow (Free-Flow) Modified Guars / Guar Derivatives. - Special Anti-Dusted Modified Guars / Guar Derivatives. Guar gum is a fiber from the seed of the guar plant. Guar gum is used as a laxative. It is also used for treating diarrhea, irritable bowel syndrome (IBS), obesity, and diabetes; for reducing cholesterol; and for preventing “hardening of the arteries” (atherosclerosis). In foods and beverages, guar gum is used as a thickening, stabilizing, suspending, and binding agent. In manufacturing, guar gum is used as a binding agent in tablets, and as a thickening agent in lotions and creams. How does it work? Guar gum is a fiber that normalizes the moisture content of the stool, absorbing excess liquid in diarrhea, and softening the stool in constipation. It also might help decrease the amount of cholesterol and glucose that is absorbed in the stomach and intestines. There is some interest in using guar gum for weight loss because it expands in the intestine, causing a sense of fullness. This may decrease appetite. USES: Diarrhea. Adding guar gum to the tube feeding formula given to critical care patients may shorten episodes of diarrhea from about 30 days to about 8 days. High cholesterol. Taking guar gum seems to lower cholesterol levels in people with high cholesterol. Guar gum and pectin, taken with small amounts of insoluble fiber, also lower total and “bad” low-density lipoprotein (LDL) cholesterol, but don't affect “good” high-density lipoprotein (HDL) cholesterol or other blood fats called triglycerides. Diabetes. Taking guar gum with meals seems to lower blood sugar after meals in people with diabetes. By slowing stomach emptying, guar gum may also lessen after-meal drops in blood pressure that occur frequently in people with diabetes. Constipation. Irritable bowel syndrome (IBS).
1 63148-62-9 Silicone oil 2 77-92-9 Citric acid 3 9003-05-8 Polyacrylamide 4 7664-39-3 Hydrogen fluoride 5 9000-11-7 Carboxymethyl cellulose 6 7757-82-6 Sodium sulfate 7 68-04-2 Sodium citrate 8 7664-38-2 Phosphoric acid 9 1310-73-2 Sodium hydroxide 10 497-19-8 Sodium carbonate 11 139-33-3 EDTA disodium 12 67-63-0 Isopropanol 13 25322-68-3 Polyethylene Glycol 14 144-55-8 Sodium bicarbonate 15 4404-43-7 Fluorescent Brightener 28 16 7758-29-4 Sodium tripolyphosphate 17 7601-54-9 Trisodium phosphate 18 532-32-1 Sodium benzoate 19 5329-14-6 Sulfamic acid 20 142-91-6 Isopropyl palmitate 21 7782-99-2 Sulfurous Acid 22 9014-01-1 Subtilisin (Compound proteinase) 23 1344-09-8 Sodium silicate 24 6834-92-0 Sodium metasilicate 25 7720-78-7 Ferrous sulfate
The primary use of Ammonium Sulphate is as a fertilizer for alkaline soils. In the soil the ammonium ion is released and forms a small amount of acid, lowering the pH balance of the soil, while contributing essential nitrogen for plant growth. The main disadvantage to the use of Ammonium Sulphate is its low nitrogen content relative to Ammonium Nitrate, which elevates transportation costs. It is also used as an agricultural spray adjuvant for water soluble insecticides, herbicides, and fungicides. There it functions to bind iron and calcium cations that are present in both well water and plant cells. It is particularly effective as an adjuvant for 2,4-D (amine), glyphosate and glufosinate herbicides.
Trade name: Anionic / flocculant / polyelectrolyte / pams / phpa Active ingredient: High molecular weight polymer Chemical name: Anionic polyacrylamide/polyelectrolyte/flocculant / Cas no.: 9003-05-8 Standard: Gb17514-2008 Brand: Certification: Iso, sgs Port of loading: Qingdao port, china Delivery time: Within 10 working days after got your payment Package: Packed in 25kgs kraft bag or white pe bag on pallet and 18-20ton/fcl, or 750kgs big bag Applications: Water treatment, paper making, sludge dewatering, textile, sugar and juice, drilling, oil & gas, mining . Sample: Free to test -
Since SIZEOMNI 40S is cationic can be used in combination with weakly cationic auxiliaries. For adding SIZEOMNI 40S, the pH of solution should be 4. For enhance the SIZEOMNI 40S performance, cationic fixing agent should be required. Application of SIZEOMNI 40S in the size press changes the wet ability of the paper and reduces its water absorption. The presence of aluminium ions in the base paper is not necessary for obtaining optimum results. Since SIZEOMNI 40S is cationic, it cannot be applied in the size press with fluorescent whiteners and normal dyes or basic dyes. Only cationic dyes can be added in the solution. The normal drying temperatures on the paper machine are sufficient to develop full sizing. No additional curing period is required. SIZEOMNI 40S has good stability in the presence of large quantities of electrolytes. SIZEOMNI 40S can be added batch-wise to the starch solution storage tank as well as continuously in the operating tank or the feeding pipe to the size press. SIZEOMNI 40S is low foaming, so defoamers are normally not required.
Cationic polyacrylamide/cpam with competitive price!!! What you need is just what we serve!!! Appearance: white powder Solid content: more than 88% Molecular weight: 6-15million Degree of ion: low, medium, high Dissolving time: less than 60min Cas no.: 9003-05-8 Applications: Sludge dehydration Paper making auxitliary Textile waste water Treatment of waste water and organic waste water Water treatment flocculant (river water) Chemicals in oil field Packing : 25kg paper-plastic composite bag, or following your demand . Sample free Price interview 25kg paper-plastic composite bag, or following your demand
Hot Sale Industrial Grade Poly Acrylamide Nonionic Cationic Anionic Polyacrylamide PAM MSDS For Water Treatment Flocculant Polymer Powder MSDS Polyacrylamide PAM Chemicals in Saifu The packaging of Polyacrylamide is 25 kg woven bag, lined with thick plastic inner film. Poduct Name Cationic Polyacrylamide Anionic Polyacrylamide Nonionic Polyacrylamide Appearance White Granule White Granule White Granule Ion Degree 5%~60% / / Hydrolysis Degree / 15%~30% 0~5% Solid Content 90% 90% 90% Dissolution Time 90 minutes 90 minutes 90 minutes
Industrial chemicals likes tetra sulpho optical brightener and di sulpho optical brighteners for pulp and paper, caustic soda flakes / sodium hydroxide, caustic soda lye, asa sizing agent, akd sizing agent, wet strength resin agent / dry strength resin (polyamido polyamine epichlorohydrin resin with a high% of solids 25 35%), sae anionic for sizing agent (butyl acrylate styrene polymer 24 26%), sae cationic for sizing agent (copolymer n [3 (dimethylamino) propyl] methacrylamide / styrene ]]) for paper industry, fluorescent brightening agents, optical brighteners for paper, fluorescent whitening agents, optical brightener, carbomer, carbopol, polyaluminium chloride, carbon brushes and brush holders, pp granules, plastic granules, eps granules and many more..
The anionic polyacrylamide produced by Xinhuan Water Treatment can be used as coagulant aid, retention agent, sludge dewatering agent and coagulation precipitant. Because its molecular chain contains a certain number of polar groups, it can adsorb the suspended solid particles in water, make the bridge between particles or make the particles coalesce to form large flocs through charge neutralisation, so it can accelerate the settlement of the particles in the suspension, and it has the effect of accelerating the clarification of the solution and promoting the filtration, etc
The anionic polyacrylamide produced by Xinhuan Water Treatment can be used as coagulant aid, retention agent, sludge dewatering agent and coagulation precipitant. Because its molecular chain contains a certain number of polar groups, it can adsorb the suspended solid particles in water, make the bridge between particles or make the particles coalesce to form large flocs through charge neutralisation, so it can accelerate the settlement of the particles in the suspension, and it has the effect of accelerating the clarification of the solution and promoting the filtration, etc.
Anionic polyacrylamide series products are water-soluble linear polymers with high degree of polymerization.2.They are easily soluble in water and almost insoluble in common organic solvents such as benzene, ether, lipids and acetone.3.It combines valuable properties such as flocculant, thickening, shearing ,resistancereducing, dispersive
Tertiary octyl acrylamide.
Cationic polyacrylamide APAM Cationic PAM, copolymerized by cationic monomer and acrylamide monomer, is a water ¡§Csoluble and linear organic polymer with high molecular weight. Application: As a flocculating agent, mainly used in industrial solid-liquid separation process, including settlement, to clarification, concentrate and sludge dewatering processes. The main applications: 1). Industry wastewater treatment: urban sewage treatment, food processing, petrochemical, metallurgical, miner dressing, dyeing, sugar. 2). Papermaking: dry strength agents, retention agents and filter aids, which can be greatly improved paper quality, save cost and improve the production capacity. 3). Oil field: anti-clayswelling, acidifing densifier. Use Method: Being used, PAM should be dissolved in solution of 0.1-0.2%, If not use the matching dissolved equipment and dosing system, a solution should be put in the diluted cans. Practice on machine via screw pump and adjust the amount according to the actual.
