Appearance - Black Powder Particle size - 5-10 um Surface area - 2000 m2/g C content - >95%
Specification: Carbon (C): 10.0% max; Moisture: 2.9% max; Loss on ignition: 13.4% max; Iron oxide (FeO3): 0.4%; Calcium oxide (CaO): 0.6%; Sodium oxide (Na2O): 0.2%; Potassium oxide (K2O): 3.5%; Sulfur trioxide (SO3): 0.8%; Silicon dioxide (SiO2): 70.2%; Aluminum oxide (Al2O3): 0.1%; Magnesium oxide (MgO): 0.4%; Appearance density after compaction: 0.24%.
We are producing currently 4-5 tonnes of clean pyrolysis carbon black a day. Our stock at this moment is 50tones. Pyrolysis Carbon Black: Grade: N330 Price: 0.90$ Incoterms: CIF Origin: South Africa
Our Powder activated carbon is manufactured using pure pine wood which is an excellent base for manufacturing activated carbons with good adsorption power. The steam activated process is done by activating the charcoal in a rotary kiln by heating at high temperatures by steam. The activated carbon that comes out from the kiln is called unwashed activated carbon. These unwashed activated carbon has higher ash and iron content. This is reduced by washing the unwashed activated carbon with acid (HCl / H2SO4) and purified water. This results in reduction of ash content to as low as 1% and iron as low as 50 ppm. The gradation of different qualities of activated carbon is done on the basis of Methylene blue value and iodine value. The iodine value is a better test as the particle size of iodine molecule is small enough to penetrate the smallest of pores. We can relate the iodine value of activated carbon directly to its surface area because of the above fact.
Welcome to Gremlog Trading DMCC, where we lead the charge in sustainable solutions and innovation. Our premier offering, carbon dust, is a by-product of aluminium smelting that underscores our commitment to environmental responsibility.As the primary supplier for carbon dust production, Gremlog Trading DMCC spearheads this groundbreaking initiative. This highcarbon-content by-product, derived during the production of anodes for aluminium smelting, serves as a remarkable alternative fuel for the cement industry. The utilization of 78,000 tonnes of carbon dust has translated into savings of approximately 36,000 tonnes of CO2 emissions, signifying a substantial reduction in dependence on traditional fuels and a meaningful stride towards a more environmentaly responsible future. Going beyond the supply chain, Gremlog Trading DMCC actively engages in the processing and re-use of stockpiled carbon dust. This approach ensures that previously generated material plays a pivotal role in advancing the circular economy. We invite you to join us in shaping a greener future with our premium carbon dust a testament to our unwavering dedication to environmental responsibility and innovation
1) iodine absorption number: 1217g/kg 2) dbp absorption number: 1147m3/100g 3) dbp absorption number of compressed sample: 90 ~ 106m3/100g 4) ctab surface area: 102 ~ 120m2/g 5) nitrogen surface area: 112 ~ 126m2/g 6) heating loss: 2.5% 7) stress at 300% elongation: -2.31.6mpa. 20kg/paper bag
Carbon Black N660 TYPE N219, N220, N234, N326, N330, N339, N472, N539, N550, N660, N772, N774 PRODUCT INTRODUCTION OF N-660 1. Package 1.1 The packages of 20Kgs, which were made of PP material or Kraft papers. 1.2 The packages of 500kgs /1000kgs, which were made of PP material 1.3 Special specifications on the package are acceptable. 2. The Physical & Chemical property. Grainy black amorphous solids, odorless, specific weight 1.82, burning point beyond 400�° C, water insoluble, non-poisonous, stable chemical property. 3. The Perniciousness of carbon-black. Nonflammable, explosibility, corrosive, toxicant, radioactive, dangerous nature. 4. Application. It is used as the Strengthening agents and the filling agents for the production of Cord layer of tires, inner tubes, bicycle tires, rubber tubes, rubber tapes, cable ropes, shoes kind, and patterns. 5. Function N660 fits for all kinds of rubber. Compared with half-reinforcing carbon-black, N660 has more complicated structure, smaller particles, and higher disperstiveness. The tensile strength, the tear resistance, and the tensile stress at a given elongation of vulcanized rubber are very high. Deformed little, heat rise slowly, well elasticity and good flex resistance, but the tensile stretch is low
Carbon Blocks used in furnace having a great alternative against Petcoke. As it has high melting power and cheap as compared to Petcoke. Here in India, we are a supplier and exporters of Carbon blocks. Parameters- Total moisture (Mt): 1.80% Ash(Aad): 13.07 Volatile matter (Vad): 13.94 Fixed Carbon (FCad): 77.88 Sulfur (S): 3.10
Calcium Carbonate Powder: Price of product (USD price or FOB price) - Contact Product origin - Viet Nam Calcium Carbonate Powder CaCo3: 98.50% min Moisture: 0.2% pH value: 8-9 Minimum Order Size and Packgaing details: Packing 50kg/bag, Minimum Order Quantity 20 feet container, 20 MT
Price : INR 45.00 / Kilogram Business Type : Manufacturer, Exporter, Supplier Product Details Shelf Life : 1 Year Other Names : Kala Namak Purity : 100% Feature : Good For Health, Hygienically Packed Form : Powder Packaging Type : Plastic Bag Preferred Buyer From Location ; All Countries Except India
Water purification
We are exporter of Activated Carbon. Activated carbon made from raw organic material such as coconut shell. The raw material of activated carbon pulverized and sieved into appropriate and uniform particle sizes. Carbon has been used as an adsorbent for centuries. Activated carbon is a particularly good adsorbent due to its high surface area to volume ratio.
We are supplier and exporter of Activated Carbon. Granular Activated Carbon Products range from the size 0.2mm to 3.75mm. Granular Activated Carbon has relatively larger particles size compared to powdered activated carbon and consequently, presents a smaller external surface. Powdered Activated Carbon Powdered Activated Carbons are small activated carbon particles, with a size that is predominantly less than 0.075 mm. Activated Carbon is used worldwide in purification of Water, Air, etc. We are producers Dura specie of Palm Kernel Shells Powder & Pellets Activated Carbon, with over 1600 Iodine level and equally high level of Harness.
ITO GLOBAL GRUOP, Sale Offer Carbon anode FC 90% -96% , clean , containers will be loaded full capacity. Our monthly supplying capacity 1000 ton 1-Carbon-95-97-% 2-Sulphur-0.95-% 3-Ash Content-1-% 4-V-M 0.30-% 5-Moisure 0.90-%
Carbon Black
Carbon Black
Carbon Black
Nowadays, Carbon black is widely used rubber industry as reinforcing agents and fillers. What¡¯s more, it is one of the oldest industrial raw materials. China is the head of the world¡¯s 12 largest producers of carbon black, with the rubber market rebounding from the economic crisis, China carbon black market has had great demand, and carbon black mill also faced unprecedented growth of gold. According to forecast, world carbon black consumption will reach 11.5 million tons in 2015. Progress will come from Asia, particularly the pulling powder of China, India, and Indonesia and Thailand. Notch Consulting Group forecasts, China¡¯s demand for carbon black will reach to totally 3.7 million tons in 2015. With radial tire production increases, carbon black is expanding in all areas of the Chinese market. Because of the thriving carbon black market, demand of carbon black mill is also increasing. Shanghai Clirik Co., Ltd is specialized in manufacturing Carbon black ultrafine mill, because technical innovation, excellent quality, and good service, Clirik is known as ¡°expert of carbon black grinding mill¡±. Working principle of carbon black grinding mill: Clirik calcite grinding mill mainly consists of main unit, classifier, powder collector, dust cleaner, blower, muffler, sound-proof room, crusher, bucket elevator, storage hopper, and vibrating feeder. After crushed by hammer crusher, the large materials become small ones and are sent to storage hopper by elevator, edge of then evenly sent to the upper distribution plate of the turnplate by vibrating feeder and sloping feeding pipe.When the grinding mill is at work, all the grinding rollers are rolling in the ring, and the materials are driven to the edge of the turnplate by the centrifugal force and fall down into the grinding chambers where the materials are repeatedly pressed, crushed and grinded by the rollers.The high-pressure air blower constantly inhales air within the grinding mill and, in turn, the air flow with crushed materials are brought to the classifier whose high-speed impeller will screen the airflow: the unqualified particle size will fall and return to the mill for being reground while the qualified particle size mixed with air will go into the cyclone powder collector. Most of the qualified powders will fall an exit from the discharging valve at the bottom; a small proportion of the fine powders, with airflow, moves to the dust cleaner, and clings to the surface of the filter bags. At the same time, the fine powders clinging to the surface fall down by the sudden vibration of the filter bags, which is caused by the instantly ejected high-pressure gas controlled by the pulse valve. The materials from the above two lots are sent by the conveyor at the bottom to get finished powders packed. In addition, filtered clean air will be emitted from the air outlet of muffler in the end. Features of carbon black grinding mill: 1. High efficiency Under the same finished final size and the same motor power, the capacity of micro powder grinding mill is twice as much as jet mill, mixing grinder and ball mill. 2. Long lifecycle of spare parts The ring and roller are forged by special material with high utilization. Under the same grinding material and finish special size, the lifecycle of spare parts is about one year, which is 2-3times longer than impact mill or turbo mill. Furthermore, the lifetime can reach 2-5 years for grinding calcite carbonate. 3. High safety and reliability As no rolling bearings or screws in grinding cavity, there are no problems caused by bolts shedding or rapid wear of bearings and seal components. 4. High fineness and flexible adjustment The final fineness of the grinding materials can be adjusted between 325 meshes and 3000 meshes, and the product fineness can reach D97¨Q5um. 5. Environment-friendly The application of pulse deduster and muffler greatly alleviates dust pollution and noise.
Selected Anthracite Coal Granular Activated carbon for amine purify ,remove EDA, MEDA, DIPA, etc Granular Coal based activated carbon is made from coal though high temperature activation .It is black in appearance, non-toxic and tasteless, with large pores. It is featured by strong adsorption capacity, high wear-resistant performance etc. It is evtensively applied to solvent recovery, catalyst carriers, gas adsorption and water purification in the field of chemicals, environmental protection, power plant, electronics, petrochemical industry, farming, medicine, marine transportation. Packing 25kg PVC bags+1MT big bag or as customers'requested Trade terms FOB CNF CIF Payments terms 1).T/T 30%advance , 2).the balance against copy of B/L Delivery time After we receive deposit within 7-10days Sample Sample is free within 1kgs
Particle Size(mesh) - 4-8, 5-10, 6-12, 10-24, 8-30, 20-40 Packing Density (g/ml) - 0.45-0.55 Hardness (%) - 95 Ash Content (%) - 5 Moisture (%) -10 Iodine Value (mg/g) - 900-1250 PH - 6-9 Packaging Details 25kgs/bag, or 500kg/big bag
