Cast Iron Wafer type Check Valve Pressure Rating : PN-16 Material : Cast Iron / Ductile Iron Description : Single Plate, Resilient Seat Ends : Wafer Type Suitable for Insertion Between Flanges Item Code : CI000038 Size : 40mm Notes : Available Valve Size : 25mm to 600mm
Cast Iron Horizontal Lift Check Valve Pressure Rating : PN-16 Material : Cast Iron / Ductile Iron Description : Bolted Cover Trim : SS (13% Cr.) Ends : Flanged Specials : IBR (up to 200mm) Item Code : CI000019 Size : 15mm Notes : Available Valve Size : 15mm to 300mm
Cast Steel Wafer Type Check Valve Pressure Rating : PN-16 Material : Cast Steel (WCB) Description : Wafer type Single Plate, Resilient Seat Ends : Wafer Item Code : CCS00032 Size : 50mm Notes : Available Valve Size : 50mm to 300mm Material : CF8, CF8M, CF3, CF3M etc.
Cast Steel Dual Check Valve (Retainerless Design) API 594 Pressure Rating : Class-150 Material : Cast Steel (WCB) Description : Spring Loaded, Retainerless Design Ends : Wafer, Lugged, Flanged Specials : IBR Item Code : CCS00069 Size : 50mm Notes : Available Valve Size : CLASS -150 40 mm to 1200mm CLASS -300 40 mm to 900mm CLASS -600 40 mm to 900mm Material : LCB, WC1, WC6, WC9, C5, C12, C12A, CF8, CF8C, CF8M, CF3, CF3M, CN7M, CF10, CF10M, 3A, 4A, 5A, 6A etc.
Product : Valves Brand : Renaissance Pipe Fitting Inc. Sizes : Refer the specification Condition : New Rating : 4.6, based on 112 reviews price : Start from 5 USD RFP India is Indias wellknown manufacturer supplier and exporter of Valves which is a device that regulates directs or controls the flow of a fluid gases liquids fluidized solids or slurries by opening closing or partially obstructing various passageways Valves are technically valves fittings but are usually discussed as a separate category In an open valve fluid flows in a direction from higher pressure to lower pressure It is being made up from different materials like Stainless Steel Carbon Steel Alloy Steel Gun Metal Brass Bronze Forge Cast Iron Cast Steel and Mild Steel Meanwhile Valves are quite diverse and may be classified into a number of basic types such as Ball Valve Butterfly valve Ceramic Disc valve Check valve Choke Valve Diaphragm valve Gate valve Globe valve Knife Valve Needle Valve Pinch Valve Piston Valve Plug Valve and so on
Many types of WCB, LCC Materal VALVE. Many types of CF8M, CF8M Material VALVE. Equipment for Oil & Gas Industries.
We supply valves� for specialized fields such as Oil & Gas, Offshore, Petrochemical, Power, Marine and General Industry. Types are Ball Valves, Gate Valve, Globe Valve, Swing NRV Valve, 3 Way Valve, Butterfly Valve, Wafer Check Valve, Disc Check Valve and Customize Valves too are in scope of supply.
Boat valve Inflatable Boat Air Valve Raft Dinghy Kayak Canoe air valve PVC Boat Air Nozzle Valve grey valves Features: * Inflatable boat safety air valve. Easy inflate and Deflate *Made of high-quality materials, durable *Comes in three parts: Vave base, Valve core and valve cap *suit for all inflatable boats, river rafts,canoe, rigid inflatable boat,banana boat, air mat,kayaksand so on.l *Double seal leak protection Specification: *Material: PVC *Color: Grey(as shown in the picture) *Size:As picture show (approximately) Package content: 2pcs *Inflatable Boat Air Valve
Level control valve with high and low different level control.
ROBOSYS ROBOCON (Model 130-010) was designed to enable pressure control and flow rate control which is used in water pipe system for effective management of water resources, and maximized profit of flow rate. It can collect and save various information by 8 Analog input signal ports and 3 pulse input signal ports. It is an excellent and useful product to monitor and control current situation of pipe system in real time through 4 communication ports by BALEM SCADA System or Industrial SCADA System for free offer. Also, It provides 4.3£ wide LCD touch screen, without be interlocked with the valve for anyone who wants to search function, that they need easily and fast. It can be used only as a function of Date Log with largest capacity internal memory, and it can save during 3 years and various sensor.
Level control valve, float valve.
Model 133-040 consists of Robocon Valve (BALEM 130), Pressure Relief Pilot Valve and Pressure Reducing Pilot Valve. The valve is installed at Bypass line for protecting pumps and pipe-line systems from dangerous surges caused by rapid changes of flow velocity within a pipeline. The valve has anticipated the down pressure caused by the abrupt stopping of the pump and opening, closing of valve, immediately opens to prevent high pressure in pipeline and has to minimize high pressure, relieves excessive setting pressure.
Model 138-010 consists of Robocon Valve (BALEM130) and Solenoid On-Off Pilot Valve. It opens or closes upon receiving an electrical signal to the solenoid pilot control. This valve, as a solenoid pilot valve, can be provided two different types. The standard basic valve which normally closed (basic valve opens as solenoid operates), and valve made to order which normally opened (Basic valve closes as solenoid operates). Optional control features are available, such as timer, relay, probe, etc for remote control by electrical signal depends on user's site conditions.
Model 139-010 is designed for installation on the discharge of booster pumps to eliminate pipeline surges caused by the starting and stopping of the pump. If power failure occurs, the valve immediately closes regardless of control mode.
Automatic Control Valve, Dual Setting Pressure Reducing Valve. Proportional Pressure Reducing Valve Work by Flow Rate (Model 132-090) controls pressure proportionally according as rate of flow. When rate of flow increase in pipeline, the valve operate higher pressure. When rate of flow decrease , the valve operate lower pressure. Therefore, Model 132-090 controls outlet-pressure proportionally according as rate of flow, even if the rate of flow change arbitrarily or slightly. Model 132-090 is optimized in waterworks, in state of smooth pressure change in pipeline. Also 132-090 have the function to prevent hunting itself.
Balem 411 is designed to be as hydraulic liquid level control valve in a reservoir. Its working principal is controling flow by a ball inside the body as float arm moves up and down against weight and buoyancy of water level. It is applicable at high pressure flow as it is opened and closed by rotation of ball. It's corrosion resistance and thermal resistance is excellent. Moreover, it is easy to carry and install.
Balem 431 is a float operated hydraulic liquid level control valve suitable for tanks and reservoirs. Its working principal is controling flow with a modulating float pilot valve, alternatively a Balem 511 can be adjusted up to 1.2m on/off differential. The body is coated by epoxy to prevent contamination of the liquid, and has excellent thermal resistance. The valve is extremely easy to maintain as no special tools or skills are required.
-Operates hydraulically independent from any external power sources and controls high and low levels in a storage tank by utilizing the line static and dynamic pressure. -The incorporation of a control shaft in the valve bonnet allows the rate of flow through the valve to be set a pre-determined flow and also acts as a mechanical shut off feature. -Closing speed of the valve can be controlled by an integral needle valve on the valve bonnet. -The valve is easy to maintain and install due to its simple design.
ROBOSYS ROBOCON (Model 130-010) was designed to enable pressure control and flow rate control which is used in water pipe system for effective management of water resources, and maximized profit of flow rate. It can collect and save various information by 8 Analog input signal ports and 3 pulse input signal ports. It is an excellent and useful product to monitor and control current situation of pipe system in real time through 4 communication ports by BALEM SCADA System or Industrial SCADA System for free offer. Also, It provides 4.3wide LCD touch screen, without be interlocked with the valve for anyone who wants to search function, that they need easily and fast. It can be used only as a function of Date Log with largest capacity internal memory, and it can save during 3 years and various sensor.
Balem 441 is a float hydraulic liquid level control valve for use in reservoirs. It is a solenoid operated hydraulic control valve. In case if power failure, it can be overridden mechanically by installing a pilot valve. It is suitable for and safe at high pressure flow as it' s opening and closing is both by solenoid and mechanical pilot valve. It' s corrosion resistance and thermal resistance is excellent, and it will not contaminate the line fluid.
