V4 Borewell Submersible Pumpset Falcon Premium 100 mm (4) Borewell Submersible pump is firmly coupled to a submersible electric motor and Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosive resistance thermoplastic and the shaft is of SS 410. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Specially designed thrust bearing to withstand high axial thrust load - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps. Specification Power Range : 0.37 kW to 4.4 kW (0.50 HP to 6.0 HP) - Version : Single Phase 160V to 230V, Three Phase 350 to 415V, 50Hz AC Supply. Single Phase available in 0.5 HP to 5.0 HP Three Phase available in 1.0 HP to 6.0 HP - Speed : 2880 RPM - Head Range : 10 Mtr. To 340 Mtr. - Discharge Range : 450 LPM to 12 LPM - Outlet Size in Inch : 1.0 , 1.25, 1.5 & 2.0 - Degree of Protection : IP 58 - Direction of Rotation Minimum Cooling : Counter clockwise from driving end -1ph: Electrically Reversible -3ph - Thrust Load : 0.37 kW â?? 0.75 kW- 650 lbs, 1.1 kW -1.5 kW -1000 lbs, 2.2kW, 7.5 kW -1500 lbs. - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR): 3ph Direct Online (D.O.L) - Maximum Starts Per Hour : 20 Times
V6 Borewell Submersible Pumpset Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series - 60 feet head per stage in radial flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Additional intermediate bearing in higher stage pumps - Fully SS pump set are available in SS - 304 Grade Specification - Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply. - Speed : 2900 RPM - Head Range : 12 Mtr. To 600 Mtr. - Discharge Range : 1080 LPM to 170 LPM - Outlet Size in Inch : 2.0, 2.5 , & 3.0 - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles Salient Features - SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series - 60 feet head per stage in radial flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Additional intermediate bearing in higher stage pumps - Fully SS pump set are available in SS - 304 Grade Specification - Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply. - Speed : 2900 RPM - Head Range : 12 Mtr. To 600 Mtr. - Discharge Range : 1080 LPM to 170 LPM - Outlet Size in Inch : 2.0, 2.5 , & 3.0 - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
V5 Borewell Submersible Pumpset Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are assembled under pressure and rigidly locked in stainless steel stators shell. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series) - 9 Mtr. Head Per Stage In Radial Flow Series. - Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial thrust loads. - Dynamically balanced roating parts ensure minimum vibration and longer life - Motor Portion covered with corrosion resistant S.S. J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps - Fully SS pumps are available in (GRS - Series) Specification - Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply (Single Phase available in 3 HP to 5 HP) - Speed : 2880 RPM - Head Range : 12 Mtr. To 640 Mtr. - Discharge Range : 690 LPM to 80 LPM - Outlet Size in Inch : 1.5 , 2.0" & 2.5" - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW, 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2 kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star Delta (SD) upto 9.3 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are assembled under pressure and rigidly locked in stainless steel stators shell Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series) - 9 Mtr. Head Per Stage In Radial Flow Series. - Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial thrust loads. - Dynamically balanced roating parts ensure minimum vibration and longer life - Motor Portion covered with corrosion resistant S.S. J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps - Fully SS pumps are available in (GRS - Series) Specification - - Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply (Single Phase available in 3 HP to 5 HP) - Speed : 2880 RPM - Head Range : 12 Mtr. To 640 Mtr. - Discharge Range : 690 LPM to 80 LPM - Outlet Size in Inch : 1.5, 2.0" & 2.5" - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW â?? 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2 kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star Delta (SD) upto 9.3 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m²/sec (max.) - Ph Value : 6.5 to 8.5
Features:  99.99% pure silver fuse element was used,with internal solid quartz sand,strong resistance to impact and vibration,high fire resistance  It is applicable in the ambient temperature of -40ºC~95ºC,relative humidity is â?¤90% Characteristics:  Conforms to IEC 60269-1-4  High breaking capacity: 100ka  Small cleaning I2t  Low arc voltage and power losses
Multi-function music player, mobile phone remote control/bluetooth link/USB plug/forward/backward/swing/volume and subtract/light switch/button to start, and other functions, intelligent soft start, one-on-one 2.4 G multi-functional remote control device, remote control car can switch, switch mode switch, music and high speed adjustment, 12 v390 all-wheel-drive more powerful, 540 swing motor, 380 steering motor, six-wheel shock absorber, simulation mobile gun head with shelf, can put the water cup can be adjusted up and down the barrel with dazzling lights, two-point safety belt, dynamic music, 12V7AH battery, car rear with large storage space, travel more convenient.
LCT, LET BS88 240 Vac/150 Vdc (IEC), 250-280 Vac/150 Vdc (UL), 6 to 180 A BS88 style bolted tag high speed fuses for the protection of DC common bus, DC drives, power converters/rectifiers and reduced rated voltage starters. Low watts loss in a compact size. Ratings Volts LCT 240 Vac/150 Vdc (IEC), 250 Vac/150 Vdc (UL) LET 280 Vac/150 Vdc (UL, 25-160 A), 250 Vac/150 Vdc (UL 180 A) Amps 6-180 A IR 200 kA RMS Sym. 50 kA DC at 125 Vdc 100 kA at 80 Vdc (70-1000 A) Operating class aR. Agency information Designed and tested to BS88 Part 4 and IEC 60269 Part 4 UL Recognized* CCC (LCT only) CE * All fuses have been tested at 318 Vac. Consult Bussmann series product representative for UL Recognized status. 6LCT 10LCT 12LCT 16LCT 20LCT 25LET 32LET 5LET 50LET 63LET 80LET 100LET 125LET 160LET 180LET
FWJ North American 1000 Vac /800 Vdc (UL), 35 to 2000 A North American style bolted tags high speed fuses for the protection of DC common bus, DC drives power converters/rectifiers, reduced rated voltage starters and high voltage traction inverters. Ratings Volts 1000 Vac 800 Vdc Amps 35-2000 A IR 25 kA RMS Sym. (35-200 A) 100 kA RMS Sym. (250-2000 A) 50 kA at 800 Vdc (35-200 A and 450-600 A) Agency information UL Recognized, JFHR8, E91958 on 50-600 A only CE FWJ-35A FWJ-40A FWJ-50A FWJ-60A FWJ-70A FWJ-80A FWJ-90A FWJ-100A FWJ-125A FWJ-150A FWJ-175A FWJ-200A FWJ-250A FWJ-300A FWJ-350A FWJ-400A FWJ-500A FWJ-600A FWJ-800A FWJ-1000A FWJ-1200A FWJ-1400A FWJ-1600A FWJ-1800A FWJ-2000A
FWJ North American 1000 Vac /800 Vdc (UL), 35 to 2000 A North American style bolted tags high speed fuses for the protection of DC common bus, DC drives power converters/rectifiers, reduced rated voltage starters and high voltage traction inverters. Ratings Volts 1000 Vac 800 Vdc Amps 35-2000 A IR 25 kA RMS Sym. (35-200 A) 100 kA RMS Sym. (250-2000 A) 50 kA at 800 Vdc (35-200 A and 450-600 A) Agency information UL Recognized, JFHR8, E91958 on 50-600 A only CE
Michelin Pilot Sport 4 SUV tires are designed for high-performance SUVs, providing a premium driving experience with superior safety, handling, and comfort. These tyres offer: Outstanding Grip and Braking: Features an asymmetric tread pattern for excellent grip on both dry and wet surfaces. The tire provides 11% better wet braking performance than other options and enhances dry braking efficiency. Dynamic Response Technology: Designed to optimize steering precision, ensuring accurate handling and stability even at high speeds (Michelin Tires) (Tire Rack). Robust SUV-Specific Construction: Built with a high-density polyester casing, along with aramid and nylon reinforcement for durability and longevity (Tire Rack) Noise Reduction and Comfort: The tire architecture is engineered to reduce road noise, offering a quiet and smooth ride, making it perfect for luxury SUVs (Tire Rack). Longevity: The Pilot Sport 4 SUV delivers 12% longer tread life due to its strong tread pattern and optimized materials(Michelin Tires).
100% Wood Pulp a4 Paper 1. Sheet Size cheap white 100% wood pulp a4 bulk copy paper : 210mm x 297mm, International Size A4 2. Quality: Imported 100% Virgin Wood Pulp 3. Whiteness = 102-104% , Natural White 4. Capability: High Speed Copying100ppm, Laser 5. Capable, Inkjet Capable, Fax Capable. 6. Thickness: 103-110 um 7. Surface roughness TS ml/ min: 75-175 8. Surface roughness BS ml/ min: 100-200 9. Bending stiffness MD: > 110 Mn 10. Bending stiffness CD: > 50 Mn 11. CIE whiteness: 148-152 12. Cobb Test: 27-33 g/ m2 27-33 A4 PAPER Item copy paper Material 100 % virgin wood pulp Size A4: 210*297mm Base Weight 80gsm,75gsm,70gsm Whiteness 102%-104%,natural white Packing 500 sheets per ream, 5 reams per carton(box) Load Qty(20ft) GSM A4 80gsm 7800 reams 75gsm 8000 reams 70gsm 8200 reams Key performance No jam in photocopy machine No double feed Stay flat after copying Leave no dust in the copy-machine Nice appearance-white and clean Nice touch-smooth and bulky No see through-print both sides Been developed for: Photocopy Machines, Laser Printers, Ink-jet Printers, Fax Machines We just sale 100% quality guarantee a4 paper
Bussmann is the world leading manufaturer for circuit protection. 170 series product is used widely in high power inverter, rectifier, convertors which need to protect the semiconductor. The product part no: 20 170m8 series, e.G:170m8056 170t7020 170e2091 170e2093 170e2095 170e2097 170e2098 170e2161 170e3579 170e3581 170e3586 170e3949 170e4276 170e5417 170e5420 170e5421 170e6143 170f3002 170f3003 170f3004 170f3005 170h3003 170h3004 170h3005 170h3006 170l7278 170l7290 170l7299-h 170l9572 170l9576 170l9578 170l9581 170l9583 170l9665 170l9868 170t8073 1~10pcs/box; Standard lot size: size000~size4 Weight: depends on products Dimensions: depends on products
1.Operation System: Android 2.2 2.Processor: Freescale iMX515 ARM Cortex A8 3.Processor Speed:800MHZ 4. Memory: DDR2 512MB 5. Hard drive: 8GB NAND FLASH 6. Display: 7"TFT capacitive touch screen1024*600 (16:9) 7. Display:7" inch TFT LCD (Touch Panel) 8. WIFI: Wireless LAN 802.11b/g 9. TF: support TF card extend to MAX 32GB. 10. Mouse & Touch Pad: Built-in touch pad, support USB Mouse 11. USB Port: 30pin, High-speed USB OTG 12. Flash: Support flash 10.1 versions 13. Card reader: TF /MINI SD Card 14. Sound effect: Audio build-in dual stereo speakers; External Microphone; Built-in Monophonic Recording. 15. Battery: 4500MAH, calling 12 hours, video 6-8 hours, no working 200 hours 16. Battery life: Advanced power management,4-6Hours 17. Power adaptor: 100-220V Input, 9V DC Output, 1500MA 18. Office: WORD, EXCEL, POWERPOINT, PDF, TXT, 19.G-Sensor 20. 3G,inbuild 3G function with calling function 21.with really GPS,Blutooth,and wifi
Hot!!! 7 inch Hightlights: 1*super thin 7 invh tablet pc with wm8650 processor. 2*The tablet pc is equipped with 7" display that allows users to easily view documents and webpages comfortably 3*android 2.2 OS 4*High Speed Connectivity Anywhere with Wi-Fi 802.11b/g Easily functions in any connected environment with fast and complete connectivity (WiFi 802.11b/g) 1. CPU: VIA8650, High-performance 800MHZ CPU+300MHZ DSP 2. Operation system: Android 2.2 (Support Flash 10.1) 3. Memory: 256MB DDR2 4. Storage Device :2GB NAND Flash maximum capacity of 32GB tf card 5. Gravity : 4-Dimensional G-sensor 6. LCD: 7" Touch screen, 800*480 pixels 7. Network : RJ45 Cable Internet: 10/100M adaptive 8. WIFI:IEEE802.11b/g/n wireless network 9. 3G: External 3G (Support Huawei E220, etc) 10. I/O Port: 30pinUSB switch interface*1,Headphone *1, MIC*1 JACK*1, TF card reader 11. Audio: 3.5mm headphone jack 12. High-quality stereo loud speaker: Built-in microphone 13. Media File :Audio file formats supported: MP2, MP3, WAV, AAC, WMA 14. Video file: formats supported: 720p video playing, MPEG1/2/4; MJPG; H263; H264 15. Photo file formats support: JPG, JPEG, BMP, and PNG. 16. Camera :Built-in 1.3MP camera 17. Power adapter: 9V,1.5A 18. Battery :Battery capacity:1800mAh 19. Size :L198 * W127* H90mm Packaging 1 x Android Tablet 1 x USB cable 1 x Charger
Features/Benefits 600 V 110 -30 A Class CC and Midget fuse cover puller that offers increased protection when removing fuses. Simple removal without the need for a separate puller. Meets Dead Front requirements. Easily gangable with 1 8" diameter wire. For use with all 600 V Class CC and Midget 1 10 -30 A fuses. Label provided for easy fuse identification. Recommended Fuse Blocks L60030C and L60030M Ordering Information Poles Pack Quantity Catalog Number Ordering Number 1 10 SPL001 0SPL0001T 1 100 SPL001 0SPL0001H 2 5 DSPL001 DSPL0001Z 2 100 DSPL001 DSPL0001H 1 10 SPL001PCB SPL0001PCBT
Description The Littelfuse Class CC, CD and midget blocks offer generous space savings and enhanced value. DIN-rail mounting and universal mounting holes are available as well as an indication feature on all Class CD fuse blocks. Features/Benefits Space-saving design Universal mounting holes for easy replacement. Indication offered on CD blocks. One hand release from DIN rail optional. Rejection feature that prevents the insertion of fuses with lower interrupting rating or voltage ratings. Clip design reduces resistance and heat . Non DIN-rail fuse blocks have interlocking feature allowing ganging for any number of poles. Covers available for all amperages to enhance safety. Specifications Voltage Rating 600 Vac/dc Ampere Ratings L600M Midget (10x38): 30 A L600C Class CC: 30 A LFC Class CD: 60 A L600CM Class CC & Midget: 30 A Dielectric strength 1200 V minimum Materials Clip/terminals: Tin-plated copper alloy Box lug: Copper Screw & captive pressure plate: Zinc-plated steel Base: Thermoplastic UL94 V-0 flammability rating Withstand Rating L60030C: 200kA (SCCR) L60030M:10kA, 20kA or 100kA based on the Midget fuse used LFC600: 200kA Approvals L600M: UL Recognized (File: E14721) CSA Certified (File: LR7316) L600C: UL Listed (File: E14721) CSA Certified (File: LR7316) LFC: UL Listed (File: E14721) CSA Certified (File: LR7316) L600CM: UL Recognized (File: E14721) CSA Certified (File: LR7316) Environmental RoHS Compliant, Lead (Pb) Free Recommended Fuses Class CC Blocks: CCMR, KLDR, KLKR Class CM Block: Fuses same as CC & Midget Blocks Class CD Blocks: CCMR Midget Blocks: BLF, BLN, BLS, FLA, FLM, FLQ, FLU, KLK, KLKD, KLQ L60030C1C L60030C2C L60030C3C L60030C1PQ L60030C2PQ L60030C3PQ L60030C1SQ L60030C2SQ L60030C3SQ L60030C1CDINR L60030C2CDINR L60030C3CDINR L60030C1PQDINR L60030C2PQDINR L60030C3PQDINR L60030C1SQDINR L60030C2SQDINR L60030C3SQDINR L60030M1C L60030M2C L60030M3C L60030M1PQ L60030M2PQ L60030M3PQ L60030M1SQ L60030M2SQ L60030M3SQ L60030M1CDINR L60030M2CDINR L60030M3CDINR L60030M1PQDINR L60030M2PQDINR L60030M3PQDINR L60030M1SQDINR L60030M2SQDINR L60030M3SQDINR
KTK fast-acting 13/32" x 1-1/2"supplemental fuse Fast-acting supplemental fuse. Black color code (600 Vac max). For superior protection, Eaton recommends upgrading to Bussmann series Low-Peak Class CC fuses. Agency information â?¢ UL Listed, Std. 248-14, Guide JDYX, File E19180, CSA Certified, C22.2 No. 248.14, Class 1422-01, File 53787, HRC-MISC, RoHS compliant, CE Features â?¢ Black color code for 600 Vac rating â?¢ Fast-acting for resistive loads â?¢ Melamine tube construction with nickel-plated bronze endcaps Typical applications â?¢ Control circuits â?¢ Lighting circuit protection â?¢ Meter circuits KTK-1/10 KTK-1/8 KTK-2/10 KTK-1/4 KTK-3/10 KTK-4/10 KTK-1/2 KTK-6/10 KTK-3/4 KTK-1 KTK-1-1/4 KTK-1-1/2 KTK-2 KTK-2-1/2 KTK-3 KTK-3-1/2 KTK-4 KTK-5 KTK-6 KTK-7 KTK-7-1/2 KTK-8 KTK-9 KTK-10 KTK-12 KTK-15 KTK-20 KTK-25 KTK-30
Catalog symbols: EV20-(amp) 20 mm diameter EV25-(amp) 25 mm diameter EV30-(amp) 30 mm diameter Description: Eatons Bussmann® series Electric Vehicle (EV) fuses for the protection of high power battery charging and management systems up to 500 Vdc in ratings from 50 to 400 amps. Specifications: Ratings Volts - 500 Vdc Amps 50-400 A Interrupting rating Max DC 20 kA Min DC 200% Agency information Designed to: JASO D622 ISO 8820-8 Manufactured under a TS16949 quality system for compliance with automotive requirements RoHS compliant REACH declaration available upon request Packaging 20 mm fuses: 250 fuses per box 25 mm fuses: 100 fuses per box 30 mm fuses: 100 fuses per box Features: Higher voltage rating provides overall system efficiency using smaller, more economical conductors while meeting the needs of higher voltage battery packs. Higher interrupting rating protects high capacity battery packs needed for vehicle acceleration and range requirements. Up to ten times faster opening under high fault current conditions helps assure reliable protection of circuits and components. Requires up to 48% less space than conventional high speed fuses to help reduce space and weight. Data logging system marks each fuse with a serial number and date code for traceability of Critical to Quality characteristics. To help project the life of the fuse in your application, unique driving profiles and conditions can be simulated to verify proper fuse size and performance under a wide range of driving behaviors. Operation as low as 200% overload provides back up protection to the battery management system. Can be applied in parallel to realize greater ampacity within sizing guidelines.
CH modular, IP20 finger-safe DIN-Rail holders for Class CC, midget and PV fuses Bussmann series CH DIN-Rail fuse holders are for UL Class CC and midget fuses, and IEC 10x38mm fuses. They are available with and without indication in 1-, 2- and 3-pole IP20 finger-safe versions. A variety of accessories extends their application flexibility and they may be ganged together to meet specific application requirements. Ratings Volts 600 V (or less) UL 690 V (or less) IEC 1000 Vdc (or less) photovoltaic (PV) Amps 30 A UL 32 A IEC SCCR 33 kA photovoltaic 200 kA RMS Sym. (CHCC, CHM*) * CHM SCCR is fuse interrupting rating dependent. Agency information CHCC, CHM; UL Listed Guide IZLT, Recognized Guide IZLT2, File E14853 CHPV, UL Listed to 4248-19, Guide IZMR, File E348242 CSA File 47235, CHPV and CHM - Class 6225-30, CHCC - Class 6225-01 IEC 60269-2 (CHM, CHPV) CCC RoHS compliant CE Storage and operating temperature -4°F (-20°C) to +194°F (90°C) indicating -4°F (-20°C) to +248°F (120°C) non-indicating Features High SCCR rated, UL Listed Class CC holder with optional open fuse indication for 600 V and 48 Vdc (see catalog number table for details) Enhanced safety with IP20 finger-safe construction UL Recognized midget and IEC 10x38mm holders with factory assembled neutral pole option Agency ratings up to 1000 Vdc for use with PV fuses. Available remote PLC fuse indication module Wiring flexibility with terminals rated for use with 75°C or 90°C solid, stranded and fine stranded wire, and fork terminals and comb busbars. (Use any higher temperature insulations at the 90°C ampacity with appropriate derating.) Complete range of UL Listed and high SCCR rated one- and threephase finger-safe comb busbars and power feed lugs Optional hex head terminal screw makes it easier to achieve necessary torque values CHM1DIU CHM1DU CHM2DIU CHM2DU CHM3DIU CHM3DU CHM4DIU CHM4DU CHM1DNIU CHM1DNU CHM1DNXU CHM1DCIU CHM1DCU CHM2DCIU CHM2DCU CHM3DCIU CHM3DCU CHM4DCIU CHM4DCU CHCC1DIU CHCC1DU CHCC2DIU CHCC2DU CHCC3DIU CHCC3DU CHCC1DI-48U CHPV1IU CHPV1U CHPV2IU CHPV2U