Product Brief Introduction: with the largest consumption for construction and building materials. It is mainly used as enamel fluxing agent, glass opalizing agent, acid-proof clay, acid-proof concrete coagulator and wood preservative. It can also be used for insecticide.
Product Hazard or Harmful Ingredients:It does not combust or explode but has corrosivity and certain toxicity.
Product Physical Properties:The product is white powder crystals and basically neutral. It is difficult to dissolve in water and acid and the density is 2.37g/cm3.
Product Chemical Properties:It is stable under normal temperature. It does not combust nor explode when it is heated or contacts with redox materials.
Spillage Treatment Method:Simple cleaning and burying
Protection Measures for Product Transport & Storage:To prevent from caking and going bad, it should be kept indoor or be covered with protection materials like canvas and free from the blazing sun.
Other Information: Anti-caking agent can be added at the request of customers.
Technical Specifications
Analysis items Standard
Na2SiF6 99% min
Loss of weight on drying at 105â?? 0.3% max
Free acid (as HCl) 0.1% max
Chloride (as Cl) 0.1% max
Sulphate (SO4) 0.3% max
Iron(Fe) 0.02% max
Water-insoluble matter 0.5% max
Particle size distribution
Passing through 40 mesh sieve 98% min
Passing through 60 mesh sieve 90% min
Passing through 325 mesh sieve 25% max
Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively.
Specifications:
Appearance white powder
F 52% min
Al 12% min
Na 33% max
SiO2 0.36% max
Fe2O3 0.08% max
CaO 0.5% max
P2O5 0.03% max
SO4 0.6% max
H2O 0.4% max
Loss on ignition 2 % max
Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels.
Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.
Formula:KAl(SO4)2 12H2O
Relative Molecular Weight:474.39
CAS NO,: 7784-24-9
EINECS No.:5637-689-7
HS CODE.: 2833301000
Appearance: lump, white crystal, white powder
Properties:Colorless, transparent, particle or crystalline powder, odorless, nontoxic, tastes slightly sweet and puckery, astringent, easily soluble in water, its water solution appears acid,is would lose crystal water and become white powder on heating
Usage;
Food industry: Buffering agents and leavening agents in food-grade products.
Chemical Industry: Water Flocculant, aluminum tanning agents and after-treating agents for leather tanning in the leather industry, dyeing agents,Astringents,mordants etc.
Specifications:
index value
appearance white crystalline powder or flakes
Assay 99.0%
residue on ignition 0.01%
Boiling point 135 c at 1,013 hpa
Moisture 0.25%
Uses:
It is used as raw material for medicine, pesticides, dyes and organosilane coupling agents. It is also useful in the determination of nickel and cobalt. Acetone oxime is an excellent corrosion inhibitor (deoxidant) with lower toxicity and greater stability compared to hydrazine.
Package:
25kg carton drum or 1kg foil bag or by request of clients
Characteristics: White powder or tiny crystalls, nodorousand salty, easily soluble in water,insoluble in alcohol, presenting slightly alkalinity, decomposed when heating. Decomposed slowly when exposed to moist air.
Quality Standard
Item The National Standard
The Total Alkalinity Content(NaHCO3)% 99.0, 100.5
Loss on Dring% 0.20
PH Value(10g/1) Solution, 8.6
Arsentic Content% 0.0001
Heavy Metal Content, 0.0005
Ammonium Salt pass
Clearness pass
Uses: food fermentation, feed addive, detergent ingredient, carbon dioxide foamer, pharmacy, leather, ore milling and metallurgy, detergent for wool, extinguisher and metal heat-treating, fiber and rubber industry, etc.
Packing:25kgs or 50kgs plastic woven bags lined with one layer polythene bag.
(We can meet with all your demands according with your need.)
24047 Bronze Powder (Heat And Corrosion Resistant) Suppliers
Short on time? Let Bronze Powder (Heat And Corrosion Resistant) sellers contact you.
1,Name: Sodium nitrite
Molecular formula: NaNO2
Formula weght:69.00
2Property: (1) ordinary sodium nitrite: white little crystals or light yellow
 (2) dry powder sodium nitrate: white crystal,non-caking, showing loose status.
Density:2.168. No odor, slightly salty. It is liable to deliquesce, dissolved in water,soluble in liquid ammonia,slightly soluble in ethanol and glycerin,Melting Point:271. Decomposition temperature is 320. It has oxidability and also has reducibility. It will slowly be oxidized into sodium nitrate in atmosphere, it can form nitrogen compound with nitrilo at low temperatures.
3Usage:It has been widely used in making nitro-compound and azo dye, mordant of textile dyeing, bleaching agent, metal heat finishing agent, cement early strength agent, and deicing agent etc.
Note: The product should be stored in a cool, dry place to prevent it from moisture, heat and sunlight. This product can not be mixed with strong reductant, inflammable and explosive materials, food, feed and additives. â?¢ This product is toxic and should be properly kept and can not be eaten.
4 Specification: (Technical Standards:GB2367-2006)
Item Unit Molten salt G High G First G Qualified G Dry powder G
Assay % 99.3 99.0 98.5 98.0 98.5
Sodium nitrate % 0.6 0.80 1.00 1.90 0.80
Chlorides % 0.03 0.10 0.17 -- 0.1
Water insolubles % 0.02 0.05 0.06 0.10 0.06
Moisture % 1.0 1.4 2.0 2.5 0.2
Loose degree -- -- -- -- 95
5,Package: net 50kg net each in plasic woven inner plasic bag, or according to customers requirement.
1.Name: Sodium nitrate
Chemical formula: NaNO3
Formula weght:84.99
2.Property:
(1) ordinary sodium nitrate: white little crystals or light yellow
(2) dry powder sodium nitrate: non-caking, showing loose status.
Density:2.257. It is liable to deliquesce, dissolved in water, soluble in liquid ammonia, slightly soluble in ethanol and glycerin, Melting Point:308. While being heated up to about 380 it will decompose and release oxygen and turn into sodium nitrite,as the heating goes on, it will decompose into oxygen, nitrogen and nitrogen oxide. It has strong oxidability and can cause combustion explosion if being mixed with organic substance, sulfur, sodium nitrate etc.
3. Usage:Â it has been wildly used in the glass industry, dye, dynamite, metallurgy, machinery, ceramic etc.
4. Specification: (Technical Standards:GB/T4553-2002)
Item Unit High G. First G. Qualified G. Dry powder G.
Assay % 99.7 99.3 98.5 99.3
Sodium nitrite % 0.01 0.02 0.15 0.02
Chlorides % 0.25 0.30 -- 0.25
Water insolubles % 0.03 0.06 -- 0.03
Moisture % 1.0 1.5 2.00 0.2
Carbonates % 0.05 0.10 -- 0.1
Iron % 0.005 -- -- 0.005
Loose degree -- -- -- 95
5.Package: net 25kg/50kg net each in plasic woven inner plasic bag,or 500kg net each in flexible container.
Properties: White monoclinic crystalline powder with sulfur dioxide odor; relative density: 1.49; very easily soluble in water; can be decomposed when heated; slightly soluble in ethanol; aqueous solution is acidic; has strong reducing property; can be oxidized in the air or loose sulfur dioxide.
Use: It is used in the bleaching of cotton textiles; as reducing agent in dyes, paper-making, leather, chemical synthesis; in the manufacture of pharmaceutical intermediates, developer, food bleacher, antiseptic and anti-oxidants.
Packing: In PP woven bag lined with PE bag; paper-plastic composite bag, and kraft paper bag etc.
Net wt.: 25/50/1000 kgs/bag or upon clients' request.
Commodity: Dicalcium phosphate Feed Grade
Use
DCP is the feed preparation of raw materials, Animal right to supplement calcium needs. Coarse its products more applicable to the preparation hens, ducks feed, concentrate feed and premix.
Product Nature
Molecular Formula:CaHPO4·2H2O,Molecular weight:172.09,After drying with loose white powdery crystals or granules. Neutral products, the melting acid, water-soluble, hygroscopicity small, heated to 90 around gradually lose water of crystallization.
Product Features
The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 18% of the products, due to a small amount of MCP, and its biological effects better.
This unique high-tech companies use technology to make our products crystallization, high purity and its harmful impurities significantly below standards:HG26362000
Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction.
Coarse particle DCP in the animals stay in the stomach longer and more conducive to the absorption of calcium phosphate, the product of Micro-particle DCP granulation from mechanical, without any chemical binder.
Specifications
Appearance white and gray powder/granule
Total P 18% min
Calcium 21% minÂ
F 0.18% max
As 30 ppm max
Pb 30 ppm max
Packing and Storage
Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.
Commodity:Sodium persulfate
Molecular Formula : Na2S2O8
Molecular weight : 238.13
Description
Sodium persulfate is a white,crystalline,odourless salt.It is used as initiator for the Polymerization of monomers and as a strong oxidizing agent in many applications.It has the particular advantage of being almost non - hygroscopic,of having a particularly good storage stability as a result of its extremely high purity and of being easy and safe to handle.
Transportation
Road/Rail transport : GGVS,GGVE,ADR,RID/CLASS 5.1 Sea transport : GGV Sea/IMDG code : CLASS 5.1 Page 5185,UN no.1505
Water hazards class 1(slight water hazard)
All information is given in good faith,but without warranty,since the conditions of use are outside our control. Verification by the user is recommended.Freedom from patent restriction cannot be assumed.
Package
(1) In 25kgs net multiple paper bags with one PE bag inner
(2) In 25kgs net PE bags
(3) In 25kgs net woven bags with two PE bags inner
(4) In 1000kgs net big woven bags with one PE bag inner
The above package is also with a pallet 1000kgs each.
Storage
NPS(SPS) is not combustible but assists combustion materials due to release of oxygen.Provided it is stored under appropriate condition.It must be stored dry in closed containers and protected from direct sunlight,heat and humidity.Impurities such as dirt,rust or traces of metal and reductants may cause catalytic decomposition.The product as supplied or in solution needs to be handled with appropriate care.The eye,skin and clothes must be protected when working with NPS(SPS) as damp powder or aqueous solution has a bleaching and slightly corroding effect.
Application
Polymerization : Initiator for the emulsion or solution Polymerization of acrylic monomers,vinyl acetate,vinyl chloride etc.and for the emulsion co-polymerization of styrene,acrylonitrile,butadiene etc.
Metal treatment : Treatment of metal surfaces(e.g. in the manufacture of semiconductors;
cleaning and etching of printed circuits),activation of copper and aluminium surfaces.
Cosmetics : Essential component of bleaching formulations.
Paper : modification of starch,repulping of wet - strength paper.
Textile : Desizing agent and bleach activator - particularly for cold bleaching.(i.e.bleaching of Jeans).
Others :
- Chemical synthesis
- Water treatment(decontamination)
- Waste gas treatment,oxidative degradation of harmful substances(e.g.Hg)
- Disinfectant
ITEMS SPECIFICATIONS
Appearance white crystalline salt
Assay 99.0% w/w min
Active oxygen 6.65% w/w min
Chloride and chlorate(as CL) 0.005% w/w max
Ammonia (NH4) 0.05% w/w max
Manganese(Mn) 0.0001% w/w max
Iron(Fe) 0.001% w/w max
Heavy metals(as Pb) 0.001% w/w max
Moisture 0.05% w/w max
Decomposition of the product as supplied at above 65C
Recommended storage temperature Normal Temperature
Storage stability as from date of delivery 12 months
Shubhlaxmi Industries is manufacturing & exporting of India's own harvesting product- the best quality of Black Pepper powder. Invite the wellness pack.
Black pepper powder is known widely today globally for its pungency, distinct aroma and as a HEAT ingredient.
It's a noble Indian spice with excellent taste, relishing flavor, superb aroma and health benefits. Black pepper powder is used in cooking and garnishing in cuisines around the world. When it is added over a pizza, it gives a unique hot flavor thatâ??s totally finger licking good. Freshly cut fruits and vegetables tastes amazing when topped up with salt and Black Pepper.
In today's era, people are health conscious and they have known the health benefits of black pepper powder. It is a common sprinkler of salads and fruit dishes. It's addition enhances rich flavor to food keeping its nutritional value intact.
It has been known to prevent cancer, stimulate digestion, relieve from cough and cold and many others.
Specification
TYPE : REGULAR/ORGANIC/STEAM STERLIZED
HS Code : 09041190
Moisture : 12%max
Ash : 1%
Mesh Size : 20-60mm
Salmonella : Absent/25gms
Flovour : Aromatic With A Penetrating Flavor
Quality Assurance : Sgs, Geo-chem, Spice Board
Loading Capacity ; 15mt In 20'fcl & 25mt In 40'fcl
Packing ; 10/25/50 Kg. New Multi Wall Paper Bag
Strong Metallic Effect Gold Dust Powder Rich Pale Copper Gold Bronze Powder For Coating Resin Printing Inks
Brief Introduction
1) cu zn alloyed gold powder/bronze powder
2) 4 colors available
3) Different size for multi-applications
4)stable quality with good price
Bronze Powder (Rich Gold Powder/ Pale Gold Powder/ Rich Pale Gold/ Copper Bronze Powder) is a kind of flaky metal pigment made by
copper, zinc material. The powder can float on binding materials, shines like gold.
Micro silica also known as fume, is an amorphous (non-crystalline) polymorph of silicon dioxide, silica. It is an ultrafine powder collected as a by-product of the silicon and ferrosilicon alloy production and consists of spherical particles with an average particle diameter of 150 mm. The main field of application is as pozzolanic for high performance concrete because of its extreme fineness and high silica.
Applications :
Silica is added to Portland cement concrete to improve its properties, in particular its compressive strength, bond strength, and abrasion resistance. These improvements stem from both the mechanical improvements resulting from addition of a very fine powder to the cement paste mix as well as from the pozzolanic reactions between the silica fume and free calcium hydroxide in the paste.
Advantages :
Addition of silica also reduces the permeability of concrete to chloride ions, which protects the reinforcing steel of concrete from corrosion, especially in chloride-rich environments such as coastal regions and those of humid continental roadways and runways (because of the use of deicing salts) and saltwater bridges.
Hongray Nitrile Examination Gloves are now in stock.
170,000 Boxes are available in stock and we can supply them on a weekly basis.
For buyers who have proven their ability to pay, we can make video calls or video recordings in our
Nitrile gloves.
100% Latex Free, No allergy.
More exceeding feature of puncture-resistance, anti-bacteriaâ??s penetration, chemical-proof.
Durable & Flexible, Surface-textured, Soft feeling, Comfortable donning.
Tapered cuff is easy for donning and operating.
CE Certification, FDA 510K Listing.
EN-374 Resistance to Chemical Attack Certification.
CHEMO Certification.
Nontoxic, Harmless and Odorless.
Choiceness Formula, Advanced Technology, Soft Feel, Comfortable, Skid Resistance and Flexible.
The products are widely used in fields of medical examination, dentistry, first-aid, healthcare, etc.
Better protection and physical property, better than latex gloves.
Powder free gloves adopt special production technology, offering better protection.
Nitrile glove is the latest generation of gloves; it's made of synthetic nitrile rubber. Comparing with latex gloves, it has exceeding feature of puncture-resistance, anti-bacteria's penetration, chemical-proof and long duration, providing better protection for users. Currently.
The products are disposable gloves.
Packing: According to customers requirements
Types: Powder Free, White and Blue.
Size: XS, S, M, L, XL
StaThick-TS-CWS-E1414 is a modified, Vegan, Gluten-Free, Plantbased, Non-GMO starch used a Emulsifier, Binder, Stabilizer and Thickener in Instant food products and various sauces and gravies. This product has good resistance to heat and shear. It's stable to conservation and resistant to freezing
4 mm, 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 8 mm, 9 mm, 10 mm and 12 mm, A wide range of paper straw selections, with selected FSC paper, food safe grade ink, and heat resisted glue
