Specification: - product type: dji s1000 lipo battery pack - capacity: 22000mah - voltage: 22.2v - max continuous discharge: 25c (550a) - max burst discharge: 50c (1100a) - weight: 2544g - flight time: more than 15mins - dimensions: 198*91*66 mm - balance plug: jst-xh - discharge plug: n/a - charge rate: 1-3c recommended, 5c max Http://www.Gensace.De Http://tattu-world.Com/uav_drone_battery/
Model no.: nxe2200/25-4s Typical capacity : 2200mah Typical voltage: 14.8v Dimensions: 30.2*35.0*104.5mm Approx weight: 217.0g Soft case: transparent colour pvc, green inside cover Plug: banana plug and t-plug Continuous discharge current: 25c Burst discharge current: 50c Charge rate: 1-3c recommended, 5c max
Model No.: NXE2200/25-4S Typical capacity : 2200mAh Typical Voltage: 14.8V Dimensions: 30.2*35.0*104.5mm Approx Weight: 217.0g Soft Case: Transparent colour PVC, Green Inside Cover Plug: Banana Plug and T-Plug Continuous Discharge Current: 25C Burst Discharge Current: 50C Charge Rate: 1-3C Recommended, 5C Max
The Blade 400 3D is designed to give intermediate to advanced heli pilots a ready-to-fly experience like no other. It comes 100% factory built and flight tested so you can get flying right away. The Blade 400 3D is equipped with state-of-the-art features like brushless power, digital servos, a heading lock gyro, CCPM control and symmetrical blades. Its also big enough that you can fly outdoors in breezier conditions that would ground smaller micro-helis. And because its flight tested at the factory no pre-flight setup is required. The Blade 400 3D is ready for everything from smooth hovering to 3D aerobatic flying as soon as you finish charging the battery. There is nothing left to assemble or set up. You can fly it just about anywhere, anytime thanks to the included Spektrum 2.4GHz DX6i radio system that avoids interference with other RC users, even those on other 2.4GHz systems. You also get the benefit of the DX6i+óGé¼Gäós advanced DSM2 protocol that provides the kind of locked-in, solid response that will let you fly even the most demanding 3D maneuvers with absolute precision. The Blade 400 3D is the first ready-to-fly mini-heli to come equipped with Spektrum advanced DX6i 2.4GHz DSM2+ 6-channel programmable computer aircraft system. Besides providing freedom from frequency restrictions and interference, the DX6i DSM2 technology offers other unique advantages like faster control response and innovative features such as ServoSync+. ServoSync automatically resequences transmitted data so mixed servos receive their pulses at the same time so you can fly extreme 3D aerobatics with absolute precision. The system also includes the feather-light, 4.4-gram Spektrum AR6100e Microlite Receiver. E-flite uses top-quality engineering and materials in everything it makes, so you always get the maximum level of value and fun. And E-flite backs all of its products with the best customer service and support in the hobby so your electric flight experience is always a positive one. Features * Completely assembled and test flown at the factory * Capable of sport flying and 3D aerobatics right out of the box * Includes Spektrums DX6i 2.4GHz DSM2 6-Channel computer programmable transmitter and factory-installed AR6100e Microlite receiver * DS75 Digital Sub-Micro servos and G110 Micro Heading Lock gyro offer precise and powerful control * 420H brushless motor, 25-amp brushless ESC and 3S 11.1V 1800mAh 20C Li-Po battery deliver incredible power and performance * CCPM control with push-pull elevator and direct-to-swash aileron/pitch linkages Specifications: Type: RTF Electric 3D Mini Heli Main Rotor Diameter: 28.2 in (718mm) Tail Rotor Diameter: 5.3 in (135mm) Rotor Blade Length: 12.8 in (325mm) Height: 9.0 in (230mm) Length: 25.6 in (650mm) Gross Weight: RTF with Li-Po battery, 23.5 oz (665 g) Motor: 420H brushless outrunner, 3800kV ESC: 25-amp brushless Battery: 3S 11.1V 1800mAh 20C Li-Po Charger: E-flite 3S 11.1V LiPo Balancing Charger 1.8A Transmitter: Spektrum DX6i 2.4GHz DSM2 6 Channel Computer Programmabe Transmitter Receiver: Spektrum AR6100e Microlite receiver Servos: E-flite DS75 Digital Sub-Micro Servos (4) Gyro: E-flite G110 Micro Heading Lock. Guarantee Packaging
High rate RC lipo battery, high rate RC lipo battery, 25c rc lipo battery, RC lipo battery, for helicopter, RC lipo battery for car RC lipo battery for boat RC lipo battery for airsoft.
Major function: charge/balance charge Input voltage: ac 100-240v Charge power: 25w Charge current: 2.0a Lipo/life: 2s/3s Nimh: 1-8s
1S 3S 4S 5S 6S 7S 8S battery packs protection board Active balance Voltage Balancer Module lipo battery bms Battery protection circuit board smart bms with active balancer:Matching the SoC of each cell. Active cell balancing redistributes charge during the charging and discharging cycle, unlikepassive cell balancing, which simply dissipates charge during the charge cycle. Thus active cell balancing increases systemrun-time and can increase the charging efficiency. Active balancing requires a more complex, larger footprint solution;not a very cheap solution
Overview Quick Details CAS No.: 0 Other Names: Light curing resin MF: 0 EINECS No.: KS-3981 Place of Origin: Guangdong, China Type: Synthetic Resin And Plastics Brand Name : KS Model Number: KS-3981 Purity: 100 Color: Green Weight: 1000g Material: UV resin Liquid Density: 1.05-1.1 Elongation at Break: 30-50% Wavelength: 395-405 Curing time: 1.5-3s Shrinkage: 50 Est. Time(days) 6 To be negotiated KS-3981 Suitable for casting resin,applied to all kinds of jewelry, ornaments, and large size casting products. Characteristics. I00% no residual ash burnout,it can be cast directly. With the combination of toughness and hardness, the printing of large-size cast products will not collapse. The maximum casting temperature is 730-750 degrees, which completely replaces the traditional process. �·Perfect casting quality and reduce surface polishing time. This special resin can be used for any type of DLP and LCD curing 3D printer. Product Description Model No. KS-3981 Color Green Weight 1000g Material UV resin Hardness Shore D 85D Viscosity (25C) (cps) 200-350 Liquid Density 1.05-1.1 Extension Strength (mpa) 15-25mpa Elongation at Break % 30-50% Wavelength (nm) 395-405 Curing time (s) 1.5-3s Shrinkage % 1% Shelf Life One year
Features:1.Streamlined housing 2.2214 kv940 brushless motor 3.Intellligent flying battery 4.2 axis gimbal 5.4K HD Camera Function aerial photography Flying time 15 Minutes Frequency 2.4GHz Battery 11.1V 2200mAh 3S LiPo
Model:faclon 150 Features: 1.Hd mini camera 2.Professional 5.8g image transmission 3.F3 flight controller 4.Brushless motors 5.Usb+3p balance charger 6.Remote controller Flight time 6~8 mins Control distance 500m-1000m Battery 7.4v 850mah 25c 2s lipo Camera built in 540tvl camera Video transmitter 5.8g
Honcell provides high discharge LiPo cells with a range of 3-100C, suitable for RC equipment, drones, electronic tools, and more. As a lithium battery exporter, we provide 6200mah 50c 3.7 v lipo pouch cells, high temperature battery cells, 11.1 v 1800mah 25c lipo battery, 11.1 v 2200mah 35c, 11.1 v 25c, 1s 220mah lipo, 220mah lipo battery, etc. For more info, contact us.
High discharge lipo cells Honcell provides high discharge LiPo battery cells with a range of 3-100C, suitable for RC equipment, drones, electronic tools, and more. As a battery cells factory, we provide 6200mah 50c 3.7 v lipo pouch cells, high temperature battery cells, 11.1 v 1800mah 25c lipo battery, 11.1 v 2200mah 35c, rechargeable battery, etc. For more info, contact us.
