Bitumen 60/70, 80/100.
Bitumen 60/70 & 80/100.Export
Bitumen Penetration Grade 60/70 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. Penetration Grade bitumens are specified by the penetration and softening point test. * SGC available * Delivery Terms: FOB Bandar Abbas or EXW * Payment: 30% prepayment and 70% against the copy of B/L
Bitumen produced by refineries in the Russian Federation, Kazakhstan, and elsewhere, is available for sale FOB or CIF at the best prices. Prices are negotiable for serious big-volume buyers. Buyer's mandate welcome. 30/40 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 40/50 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 50/70 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 60/70 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 80/100 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 85/100 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 100/120 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT
Bitumen 60 70 80 100 Etc.
Saudi bitumen or Iran or Egypt origin. Reconditioned used drums
Bitumen 60/70, Bitumen 80/100.Exporting
Bitumen 60/70 and 80/100.
Bitumen 60 70 and 80 100.
Bitumen (60/70 - 80/100), used/waste engine/machine oil.
Maximum : 100,000 MT/Month
Asphalt bitumen 60 70 80 100 grade 60 70.
Bitumen 60/70 in Old Barrels Description Bitumen 60-70 is high quality penetration grade asphalt derived from crude petroleum reefing. It is dark in colour and possesses waterproofing and adhesive properties. It is substantially non-volatile and softens gradually when heated. Uses Bitumen 60 û 70 is used as a binder of mineral aggregates in asphalt concrete and hot laid plant mix for highways, airports, parking areas, driveways and curbs. Technical data Test test method results Penetration @ 25¦c, 100gm, 5sec. 1/10mm astmd-5 60.0-70.0 Softening point by ring and ball method ¦c astmd-36 (min) 48.0 Ductility @ 25 ¦c cm astmd-113 (min) 100.0 Flash point (Cleveland open cup) ¦c astmd-92 (min) 300.0 Viscosity kinematic @ 135 ¦c cst astmd2170 (min) 350.0 Solubility in trichloroethylene %mass astmd-2042 (min) 99.5 ôThin film oven test. (3.2mm).@163¦c.5hrs: astmd1754 Loss on heating %mass (max) 1.0 Penetration of residue % of original ( min ) 52.0 Ductility of residue (@25 ¦c . 5 cm/min) cm ( min ) 50.0 Available quantity 5000 mt monthly Backing Bitumen 60-70 In Old drums. Time of delivery : 45 days for barrel Delivery : any port all over the world. Payment method * by cash * Issuance confirmed letter of credit at sight Irrevocable transferable Expiry date will be 3 month from date of issuance the letter of credit place Egypt Docs Required * Original invoice * Full set of bill of lading. * Certificate of Egyptian origin * Packing list * Weight list * SGS or any inspection co.. Instruction * 100 % payment letter of credit at sight. * Bill of lading showing not clean on board is acceptable * Bill of lading showing additional cost is acceptable * Bill of lading showing name of issuing bank in two fields (consignee and notifying) is acceptable * Freight forwarder bill of lading is acceptable * Late presentation or stale docs. Are acceptable * Presentation period 21 days * Third part docs. Acceptable * comm. Of the applicant bank will be paid from the applicant and comm. Of negotiation bank will be paid from the benef.. * Our bank swift code nbegegcx * Language or spelling mistakes are acceptable.
Bitumen Grade 60/70 And 80/100 As Per Seller Procedure only. Dip and pay CIF FOB
Bitumen 60/70 Test method Unit Specification Specific gravity @ 25°C ASTM D70 Kg/cm3 1.01/1.06 Penetration @ 25°C ASTM D5 mm/10 60/70 Softening point °C ASTM D36 °C 49/56 Ductility @25 °C ASTM D113 cm 100 min Loss on heating(wt) % ASTM D6 wt % 0.2 max Drop in penetration after heating % ASTM D5-D6 % 20 max Flashpoint °C ASTM D92 °C 232 min Solubility in Trichloroethylene ASTM D2042 wt % 99 min Spot test A.A.S.H.O.T102 Negative
KATSU General Trading Ltd is in the business of supplying Bitumen. We are pleased to offers bitumen in different kinds and grades with prime quality as supplier like penetration grades, viscosity grades & medium grade, curing (cutbacks) as bulk bitumen, drum bitumen. It will be our pleasure to provide you products that meet your needs at reasonable prices. Best regards. Jeremy.
BITUMEN 80/100 TECHNICAL DATA: SAMPLE NO. SPECIFICATION Penetraction Grade MIN. MAX Penetraction 25 ¦c (100g.5s)0.1mm 80 100 Penetration (AFTER RTFOT )% of original pen 50 Softening Point (Ring and Ball ) ¦c (NEAT) 45 52 Softening Point (R & B) after loss on heating (5hrs 163 ¦c) ¦c Softening Point (AFTER RTFOT ) ¦c 45 Flashpoint (Cleveland Open Cup ) ¦c 225 Viscosity at 135¦c (VIRGIN ) cst Viscosity at 135¦c(AFTER RTFOT) cst CHANGE 300% Ductility at 25¦c cm 100 Ductility at 25¦c (AFTER rtfot)cm 75 Specific gravity at 25¦c g/cc 1.00 1.05 Thin Film Oven Test (TFOT) (5hrs at 163¦c)% 0.5 Solubility in Trichloroethylene % 99 Loss on heating (5hrs.163¦c) % max. 0.5 Penetration on residue(100g -5s)% of initial Pen Min. 80
Bitumen a black viscous mixture of hydrocarbons obtained naturally or as a residue from petroleum distillation. It is used for road surfacing and roofing. Bitumen is a mixture of Organic Liquids that are highly Viscous, Black, Sticky, Entirely Soluble in Carbon Disulfide, and composed primarily of highly condensed Polycyclic Aromatic Hydrocarbons. Naturally occurring or crude bitumen is a sticky, tar-like form of petroleum which is so thick and heavy that it must be heated or diluted before it will flow. At room temperature, it is much like cold molasses. Refined Bitumen is the residual (bottom) fraction obtained by fractional distillation of crude oil. It is the heaviest fraction and the one with the highest boiling point, boiling at 525 C (977 F). Petroalliance are involved in import and the supply and trade of Bitumen Oil. This oil is a dark and viscous liquid which is sticky in texture. It is widely used in road construction, waterproofing, paints, enamels etc. It is available to clients in different types of settings at highly affordable prices. It is widely acclaimed amongst our client base for its supreme quality. Uses of Bitumens Bitumen is primarily used for construction and paving of roads. Its other uses are for Bituminous Waterproofing Products, including the use of bitumen in the production of roofing felt and for sealing flat roofs.
Bitumen 60/70 And Bitumen 80/100.
Bitumen Penetration Grade 80/100 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by ASI GLOBAL TRADE is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by ASI GLOBAL TRADE is produced from vacuum residue (short residue) feedstock. Penetration Grade bitumens are specified by the penetration and softening point test. Designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen. SPECIFICATIONS : CHARACTERISTIC TEST METHOD UNIT MIN. MAX. Specific gravity at 25°C ASTM D70 °C 1.01 1.05 Penetration at 25°C ASTM D5 mm 80 100 Softening Point ASTM D36 °C 42 52 Ductility at 25°C ASTM D113 Cm 100 - Loss on heating ASTM D6 % 0,5 Flash Point ASTM D92 °C 225 Solubility in Trychloroethyelene ASTM D2042 % 99 Performance after RTFOT Method Test to ASTN D1754: - Change in mass (m/m) ASTM2872 % - 0.5 - Retained Penetration 25°C, 100g, 5s (% of original) ASTM D5 % 50 - - Increase in softening point ASTM D36 °C - â?¤8 - Softening point after hardening ASTM D36 °C 45 - LEGAL NOTES The information, and, in particular, the recommendations relating to the application and end-use of ASI GLOBAL TRADE products, are given in good faith based on ASI GLOBAL TRADE current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with ASI GLOBL TRADE recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchant-ability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the products suitability for the intended application and purpose. ASI GLOBAL TRADE reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.
