Basalt rebar, basalt chopped fiber, basalt roving, basalt mesh, basalt geo grid.
Urea n46, diesel en590 10ppm, jet fuel a1, dap, basalt fiber products, nitrocellulose.Import and export of goods and technology
1. Chopped basalt fiber Basalt fiber is a kind of inorganic fiber material. Chopped basalt fiber is an inorganic mineral fiber with a length of less than 50mm and can be evenly dispersed in cement concrete. 2. Characteristics of chopped basalt fibers (1) The naturalness of raw materials. Because the raw material for producing continuous basalt fiber depends on the natural volcanic extrusive rock, there are no ingredients harmful to human health except that it is inherently high in chemical stability and thermal stability. (2) Comprehensive performance. Basalt fiber is acid resistant and alkali resistant. It is both low temperature and high temperature resistant. It is insulated and insulated by heat and electricity. Its tensile strength is higher than that of large tow carbon fiber. Its elongation at break is even better than that of small tow carbon fibers. It has high compressive strength, shear strength and adaptability to aging, and has good comprehensive properties in harsh environment. (3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of steel fiber and polyester fiber. (4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with asphalt concrete, cement concrete and mortar. The newly mixed basalt fiber concrete has stable volume, good workability and durability, and has superior high temperature resistance, anti-seepage, crack resistance and impact resistance.
Basalt Fiber Series Fabric 1. Production: basalt fiber fabric is made of continuous basalt fiber textile yarn through warping, weaving and coating. 2. Weaving methods according to requirements: unidirectional cloth, plain cloth, twill cloth and grid cloth. 2. Application: reinforced mesh cloth, fireproof cloth, fishing rod cloth, luggage decoration cloth, electrical insulation cloth, bulletproof cloth, etc. 3. Packaging: 100M / roll (or customized as required). 4. Performance: high strength, high temperature resistance, good electrical insulation, non hygroscopic, acid and alkali corrosion resistance. 5. Specification and model: bfw16 * 20-100 (120) BFW: basalt fiber fabric; 16 * 20: the warp and weft density of yarn is 16 and 20 pieces / cm respectively; 100: the width of the fabric is 100 cm; (120): the mass per unit area of fabric is 120 g / m2. BFNP5*5-200(160) BFNP: basalt fiber mesh cloth (coated and shaped); 5 * 5: the longitude and latitude mesh size of the cloth surface is 5 and 5mm; 200: the width of the grid is 200 cm; (160): the weight of grid cloth per unit area is 160g / m2.
Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer) Basalt fiber reinforcement (new material to replace reinforcement) Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã?? Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters) 1. The cost is the same as that of ordinary reinforcement; 2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa, 3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust. 4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges. 5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement. 6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??
Silk cocoon, silk waste, silk sheet, silk fiber, silk tops, spun silk yarn, silk sliver, silk yarn, carpet yarn, silk roving yarn, silk noil yarn, blended silk yarn..Wholesale yarn export company
Basalt is extracted from the earth's surface through mining and processing of the rock in factories. Basalt is mainly used for structural building materials such as bricks, tiles, foundations and sculptures, as well as within stonewalls for thermal purposes and rail tracks For more details please contact us.
Granite, marble, quartzite, quartz, sandstone, feldspar, basalt, limestone, cobbles, sulphur.
CYC Fiberglass Direct Roving (ECY150D) for FRP Pultrusion CYC Fiberglass Roving for FRP Pultrusion is finished with high performance silane sizing and compatible with unsaturated polyester(UP), polyurethane, vinyl ester (VE), epoxy (EP) and phenolic resin matrixes. It is designed for weaving, filament winding, pultrusion, extrusion and hand lay-up processes. The typical end-finished products are including various FRP/GRP pipes, pressure vessels, gratings, chemical storage tanks, automobile parts, cable trays and so on. Glass Type: E-CR Glass Filament Diameter: 13, 15, 17, 24, 31�¼m Linear Density: 300, 600, 900, 1200, 2400, 4800, 9600tex Product Features: Good strand integrity and even tension Fast and complete wet-out in resins. Inner side unwinding smoothly & no fuzz Excellent tensile strength and mechanical properties TYPICAL PRODUCT SPECIFICATIONS Product Code Filament Diameter (m) Linear Density (tex) Tensile Strength (N/tex) Moisture Content (%) Loss On Ignition (%) Compatible Resin ECY150D-300 13 300 0.40 0.10 0.55±0.15 UP/VE/PF/EP ECY150D-600 15 600 0.40 0.10 0.5 0.15 UP/VE/PF/EP ECY150D-900 17 900 0.40 0.10 0.55±0.15 UP/VE/PF/EP ECY150D-1200 17 1200 0.40 0.10 0.55±0.15 UP/VE/PF/EP ECY150D-2400 24 2400 0.40 0.10 0.55±0.15 UP/VE/PF/EP ECY150D-4800 24 4800 0.40 0.10 0.55±0.15 UP/VE/PF/EP
1. Basalt short fiber - a new material to replace steel fiber. Basalt short fiber is an inorganic mineral fiber with a length of less than 50mm, which can be evenly dispersed in cement concrete. 2. Characteristics of basalt short fiber (1) the specific gravity of steel fiber is 7.8 and that of cement concrete is 2.5. After mixing, the specific gravity of steel fiber is higher than that of cement, and the cement will sink and have poor dispersion. The specific gravity of basalt short fiber is 2.6, which is basically equivalent to that of cement concrete. After mixing, it does not sink, has good dispersion, is degradable, and is green. The road surface will not be as hard as steel fiber, resulting in car driving noise.. (2) Basalt staple fiber is a real "multifunctional" fiber. Acid and alkali resistance (especially alkali resistance, fully applicable to cement concrete), low and high temperature resistance, insulation and sound insulation. The tensile strength is three times that of steel fiber. The corrosion resistance of basalt fiber is better than that of steel fiber. The compressive strength is 20% higher than that of steel fiber, which is suitable for harsh environment. It has excellent comprehensive performance. (3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of 50% steel fiber. (4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with cement concrete and mortar. Fresh basalt fiber concrete has stable volume, good workability and durability, and has excellent high temperature resistance, impermeability, crack resistance and impact resistance.
CYC FIBERGLASS ROVING FOR FRP FILAMENT WINDING CYC Fiberglass Roving for FRP Filament Winding is finished with high performance sizing and compatible with unsaturated polyester(UP), polyurethane, vinyl ester (VE), epoxy (EP) and phenolic resins. It is designed for filament winding process specially and provide fast wet-out in multiple resins with excellent mechanical properties. The typical end-finished products are including FRP water pipes, high pressure oil pipes, chemical corrosion resistant pipes, pressure vessels, gratings, chemical storage tanks, automobile parts, cable trays and other insulation industries. Glass Type: E-CR Glass Roving Type: Singe-end Roving, Direct Roving, Multi-ends Roving, Assembled Roving PRODUCT FEATURES Good strand integrity and even tension Fast wet-out in resin with low resin consumption Inner side unwinding smoothly & low fuzz Excellent tensile strength and mechanical properties TYPICAL PRODUCT SPECIFICATIONS Product Code Filament Diameter (�¼m) Linear Density (tex) Tensile Strength (N/tex) Moisture Content (%) Loss On Ignition (%) Compatible Resin ECY150DF 13~24 600, 1200, 2400 4800, 9600 0.40 0.20 0.55±0.15 UP VE ECY280DF 13~17 1200, 2400, 4800 0.40 0.20 0.55±0.15 UP EP
They are black hard volcanic igneous rocks that contain less than 53% silica. (SiO2) Basalt rock is a superficial fire rock whose texture (glass) or microscopic flour is because its crystals solidified near the surface of the earth. This causes the ions not to give the opportunity to cluster around the crystallization center, so its texture is very fine. Basalt is a very heavy and hard rock when touched. It is rough and very difficult to separate.
Features Of Garnet Garnet is pure and natural sand. Of the six major varieties of Garnet (Almandine, Andradite, Grossularite, Pyrope, Spessartite, Uvarovite), Almandine is the best abrasive Garnet with the composition of 3FeO, AI203, ESIO2. As Garnet has low content of free silica in it, it is widely used in sand blasting and waterjet cutting. Applications Abrasives Sand Blasting Water jet cutting
Features Of Steel Billets Steel billets result from the second stage of the steel production process. They are hot-rolled or forged from an ingot or strand cast. Smaller and longer than a bloom, billets are usually a square cross-section less than 36 square inches. They are used for the manufacture of all ‘long’ steel products such as bars, rods, pipes, tubes, wire and wire products.
Features Of Cement India is World’s Second largest Cement Producer. India is contributing tremendously to the Supply of Cement across the Globe. The Capacity of Indian market to produce and supply cement is increasing at swift pace. We source the best quality and from the best brands. We supply OPC, PPC, Slag cement, White Cement and Sulfate Resisting Cement.
Features Of Micro Silica (Silica Fume) Micro Silica also known as Silica fume. It is a by product of producing silicon metal or ferrosilicon alloys in smelter using electric arc furnaces. It is a grey coloured powder, pozzolanic in nature. Applications Concrete Industry Refractory Rubber Industry Anti caking agent Pellet Binder
Features Of Lime Stone Fines Lime stone is a fine powder obtained from the processing of Limestone. It can be added to Portland cement as an addition, wither at factory to create a composite cement or at the batch plant to form a combination cement. Applications Cement paste Filler Green Concrete
Features Of Granulated Blast Furnace Slag (GBFS) Granulated Blast Furnace Slag or GBFS is formed when Blast Furnace Slag or BFS is successively at a fast rate quenched from the furnace rather than left for cooling. It has a density of about 60% to 70% that of natural sand. This material has a much increased resistance to sulfate attack. This eventually leads to better performance in countering acids of any type. In GBFS, no type of reaction related to alkali and silica occurs. Also the material provides a huge saving in connection to carbon dioxide emission which is an extra boon. What constitutes GBFS are its properties that consist of durability, appearance, higher ultimate strength than concrete which is made up of Portland cement and high sustainability level of the product made out of this material.
Features Of Fly Ash Fly ash, also known as flue-ash is a residue which is generated during combustion and consists of fine particles. There are impurities in coal which mostly consist of clays, limestone and dolomite particles. These turn up into ash as they cannot be completely burned. Fly ash is useful in a number of ways and is one of the most researched upon mineral source. It is mainly a pozzolanic substance which contains aluminum and silicon material which in return due to the presence of water can take form of cement. A lot of research and development initiative have been taken place across the globe to build and develop technologies that can utilize the full potential of fly ash. Royal Mineral takes care to ensure flawless production stages.
Features Of China Clay China clay belongs to the group of Minerals called Kaolinite. It is one of the most common minerals. Kaolinite clay occurs in abundance in soils that have formed from the chemical weathering of rocks in hot, moist climates—for example in tropical rainforest areas. Comparing soils along a gradient towards progressively cooler or drier climates, the proportion of kaolinite decreases, while the proportion of other clay minerals. Applications Glass Ceramics Paper Cosmetics
