GFM8-2 Automatic type fire extinguisher powder filler is equipped with T3806 weight display of high precision and MP-T printer. The filling is automatic and quantitative. The residual dust on the filter is cleared by use of the negative pressure produced by vacuum. As it integrates electronics, electrical device and machinery into one entity, labor intensity is lowered and work environment improved. It is characterized by small volume, light weight, lower energy consumption, easy movement, simple operation and longer service life. Main technical parameters Volume: Length í-Width í-Height (1130mmí-520mmí-1350mm) Weight: 200kg Voltage: AC 380v/220v 50Hz Power: 0.55KW/1.5KW Filling precision: 1kgí_+0.02 Filling speed: 6-12kg/min. 1130mm*520mm*1350mm 200kg Wooden case
Beer filtration is a physical process which uses filter medium to remove the tiny particles suspended in the beer. So that to make beer clear, transparent and without suspended matter.
Brief: This semi-atuomatic filling and packing machine was designed in terms of the National GMP Standard. Weighing and filling can be done automatically. The machine is suitable for packing powdery product, for instance, milk powder, feed, rice powder, icing sugar, coffee, monosodium glutamate, solid beverage, dextrose, solid medicament,etc. Characteristic: 1.Working states shows by Digital 7-segment display, which result in easy operation and clear control. 2.Weighing feedback proportion tracked . Having high precision and well stability. 3.Reasonable mechanical structure. Easy to change size parts and clean up. Features: Metering capacity: 1-500 g Metering speed: 20-50 times/min Weighing accuracy: +0.3%-2% & -0.3%-2% Machine weight: 150 kg Power source: 380V/220/110 (50Hz / 60Hz) Machine power:800W Hopper capacity:26L
I.General survey Gfm 8-2 powder filler is a new product developed and designed by our factory in combination with the characteristic of actual filling with reference to the advantages of its counterparts at home and abroad. Powder is rapidly absorbed into the cylinder to be filled by vacuum jet current. It is equipped with t3806 weight display of high precision and mp-t printer. The filling is automatic and quantitative. The residual dust on the filter is cleared by use of the negative pressure produced by vacuum. As it integrates electronics, electrical device and machinery into one entity, labor intensity is lowered and work environment improved. It is characterized by small volume, light weight, lower energy consumption, easy movement, simple operation and longer service life. So it is specially suitable for powder filling of fire extinguisher and also ideal for other powder filling sector. Volume: length *width *height (1130mm*520mm*1350mm) Weight: 200kg Voltage: ac 380v/220v 50hz Power: 0.55kw Filling precision: 1kgín+0.15 Filling speed: 6-12kg/min
Automatic type fire extinguisher powder filler GFM8-2 powder filler is a new product developed and designed by our factory in combination with the characteristic of actual filling with reference to the advantages of its counterparts at home and abroad. Powder is rapidly absorbed into the cylinder to be filled by vacuum jet current. It is equipped with T3806 weight display of high precision and MP-T printer. The filling is automatic and quantitative. The residual dust on the filter is cleared by use of the negative pressure produced by vacuum. As it integrates electronics, electrical device and machinery into one entity, labor intensity is lowered and work environment improved
Njp Series Pharmaceutical Equipment/Machinery Automatic Capsule Filling Machine, Automatic Capsule Filler, Capsule Making Machine Product advantages: 1. Independently develop and improve the internal design of the die turntable, and use original Japanese linear bearings, which have higher accuracy and longer service life than counterpart equipment. 2. The design of the lower cam, compared with its counterparts, we have increased the pressure atomizing oil pump to maintain the lubrication in the cam groove, which greatly reduces wear and prolongs the service life of parts. 3. The upper and lower modules are designed for one-way movement, and the imported double-lip polyurethane sealing ring has better sealing performance. 4. The control panel is eye-catching and intuitive, and adopts stepless variable frequency speed regulation. 5. The three-dimensional adjustment mechanism based on the lower plane of the measuring plate is used to make the gap more uniform and the loading difference more accurate. 6. Equipped with safety protection devices for people and machines, with automatic shutdown device for lack of materials, to achieve more stable machine operation, safety and reliability. 7. The combination of air blowing and gas suction of the module has been added to ensure that the mold holes are clean and free of dust and improve the probability of operation. 8. Independent design of 2 sprockets drives 2 indexing boxes to separate labor. (Peer is generally a sprocket to drive 2 indexing boxes.) Reduces resistance, shares operating pressure, increases operating intensity, and the station's fault is basically zero.
Yufeng INB-M filler units are molded in clear, FDA approved polycarbonate. It can hold 6 L fillings, since it is clear so you can see the material how many it is. The bases have a number of features that make them useful in a wide variety of applications. They include: Normal Cycling, Reverse, which can be selected at the keypad. It had got CE certification.
BG-TQX-1 model keg washer uses hot alkaline water, hot water, water, sterile water to wash the kegs. After washing it, there is the function of steam sterilization and CO2 injection. This machine is suitable for washing 10-60L plastic and stainless steel keg. Filling Capacity:30-40 kegs per hour
Automatic rotary type ropp aluminum cap capping machine for glass plastic bottle Introduction of ropp capping machine: Automatic ropp capping machine was used for sealing aluminum screw cap on glass bottle and plastic bottle. The ropp capping machine was used for white spirit, olive oil, chemistry, drink, water etc, and the bottle is glass bottle or plastic bottle. The ropp capping machine consists of bottle conveying structure, cap arranging structure, bottle nipping structure, cap screwing structure and electric control system. The ropp capping machine can be composed with rinsing machine, filling machine to become one production line. Features of ropp capping machine: 1. The frame and body of machine are made of high-quality 304 stainless steel with good appearance and easy cleanliness, in conformity with food hygiene standards; 2. Using rub type screw cap makes it own a reasonable structure, stable and reliable performance, high working efficiency and helps solve some disadvantages such as skidding and attrition of caps; 3. The interval and height of the screwing structure can be adjusted quickly to adapt different types of bottles and caps; 4. The cap conveying structure is equipped with a photoelectric sensing device to make sure its safety of starting when no cap; shutting up when full of caps. In this way, the machine can run more stable and reliable.
Voltage 220-240V ~50Hz Power: 2500W Material: #304 S/S Housing: Single layer with copper color Four sealed non vented clip on lid with handle Concealed heating element Safety: Boil dry protection Capacity: 30 Liter With LCD to show temperature With thermostat on display: Temperature control from 60-100 & 140 degree Power regulator: 3 setting - 500W, 2000W & 2500W On / Off button Including serving RIM and Cooling coil
Semi Automatic Capsule Filler Machine Features: This machine with electricity and steam to combination control, equipped with electronic automatic counter device is suitable for filling various domestic or imported capsule. It can automatically finish the action of location, separation, filling, locking for capsule, reduce labor strength, improve production efficiency, accord with the requirement of medicine sanitary. It is an ideal equipment with smartness accuracy for dosage, novel structure good-looking ease of operation, for filling capsule medicine in pharmaceutical industry. Main Technical parameter: Max. productive capacity: 25000pcs/h Capsule 000#00#0#1#2#3#4# capsule Power(kw) 2.2kw Power supply 380v 50hz or customized Overall dimension (mm) 1350x700x1600(LxWxH) Weight(kg) 400
Hg company specializes in producing beer filling line that includes depalletizer, rinsing, filling, capping monoblock, pasteurizer, labeler, carton packing machine. Beer rinsing, filling, capping machine is designed based on absorbing germany technology and innovate according to chi eer industry situation.
Made from material, safe to allow heavy absorbency with super absorbent filler core Soft and non-woven bonded top sheet rapid fluid acquisition, Effective leak prevention Heat-sealed, non-woven edges are gentle on skin, waterproof layer protects your sheets and mattress from fluids and accidents Multifunctional, utility pee pad for baby, elderly, adult, patient, pet and so on for disposable use Product Detail Product Disposable Bed Sheet Material Non-Woven Certification ISO, CE, GMP Standard international Size Standard Color Blue,White, Green, Can be customize. Weight 25GMS, 35GMS, 40GMS. Package 500 Pcs/Carton Production Capacity 20000 Pcs per day Production Style Automatic Machine Sterilization NO Specification As per requirement Feature and uses Medical & Pharma. Storage Room temperature Disposable Yes Pre Order your requirement Bulk Quantities Available Meet International Standard Packaging is Customization as per client need
Salient Features PLC control Special bag push conveyor Dual Feeder for course and fine weight. Special weighing system control with load cell Special variable speed conveyor to synchronies with bag closing machine Electro pneumatic bag spout (Bag Gripper) Electric Control panel with IP-54 protection standard Main Feed controlled by pneumatic system All parts in contact with product are made of Stainless steel. Appropriate feeding system for different products Machine Packaging Capabilities Milk Powder, Pesticide Powder, Detergent Powder, Chemical Powder, Rice, Sugar, Beans, Seeds, Salt, Tea, Dry Fruits, Pulses & any other granule or powder product. Technical Specifications Output Quantity: 5 Kg - 20 Kg: 10-15 Bags/min 10 Kg - 50 Kg: 06-12 Bags/min Filler Accuracy: �± 0.05 to 0.25 % Pack / Quantity Range: Min. Bag size (W x L) approx: 305 mm x 356 mm Max. Bag size (W x L) approx: 533 mm x 890 mm Packaging Material: Co-extruded 3 or 5 Layer PE Based or Laminated, Metalize, Aluminum Foil, Polypropylene woven bag, Jute bag, Cotton Bag, Paper Bag, China fusing, etc. Electrical Requirement: Input Supply: 380 V AC, 50 Hz, 3 ph + N + G Connected Load: 2.5 KVA Peak Power Rating: 2.35 KW Air Requirement: Air Pressure: 6 bar constant dry air Air consumption: 800 Ltr/min Machine Dimensions along with conveyor (W x D x H) approx.: 3550 mm x 1525 mm x 2970 mm (Depends on Customised Requirements.) Weight: 600 kgs (Net) Optional Accessories Customised pack Size Automatic Bag Counting System Long Conveyor Extra mouth collar for different size bags Special pneumatic sealer with adjustable Heavy duty Industrial Sewing machine with adjustable ahead
Salient Features Advance augur dozing system control with special servo motor Operator friendly PLC controller Independent augur system with adjustable height. Special scoop conveyer for automatic hopper filling Special hopper with agitator control with level sensor Pouch style options Center seal pouch with increased panel area Advanced Constant Heat sealing System Specially designed film roll unwinding mechanism for smooth bag pulling Operation with servo motor and control cards. Independent drives for sealing, feeding & film feed operations for optimum performance Less floor space requirement for machine installation. Equipped with variable speed drive for flexibility to offer adjustable output for the machine Bag Unwinding by Lanatex belt drive through servo motors Flexible vertical seal jaw positioning to offer range of variable pack with offering quick change-over facility Suitable for different range of packaging film i.e PE film with or with out Laminate Special safety card to control current for protection electrical / electronics equipment Adjustable bag length by PLC through servo motor and control cards Independent dozing system Independent temperature controller for both seal Centralised lubrication system Jaw's security devise to protect the operator of machine Electric Panel IP-54 Protection Standard. Machine Packaging Capabilities Milk Powder, Pesticide Powder, Detergent Powder, Chemical Powder, as well as all kinds of powder products. Technical Specifications Output Quantity: 100 g - 1000 g 1000 g/5000g Outpt: 20 - 75 Bags/min 15 - 30 Packs/min Filler Accuracy: ± 5 gm Pack / Quantity Range: Min. Bag size (W x L) approx: 120 mm x 150 mm Max. Bag size (W x L) approx: 355 mm x 500 mm Packaging Material: Co-extruded 3 or 5 Layer PE Based or Laminated, Metalize, Aluminum Foil 60 to 140 microns Electrical Requirement: Input Supply: 380 V AC, 50 Hz, 3 ph + N + G Connected Load: 7.2 KVA Peak Power Rating: 6.48 KW Air Requirement: Air Pressure: 6 bar Air consumption: 800 Ltr/min Machine Dimensions along with conveyor (W x D x H) approx.: 1110 mm x 1700 mm x 2400 mm (1300 mm x 1956 mm x 3350 mm) for 5 Kg Weight: 600 kgs (Net) Optional Accessories Customised pack Size Photomark Registration Unit for Panel Printed Films Automatic Pouch Counting System Inert Gas Flushing System Conveyor Date Coding System Extra Magazine Shaft Optional Film End Sensor UV sterilisation of packaging film Programmer cam switch controller Special thermic sealing jaw Impulse jaw Volumetric dozing system Platform English Folding System Extra Conformer for different sizes Air release system
Salient Features Special linear weigher control with load cell & stepper motors Operator friendly PLC controller with a user friendly GUI Pouch style options Center seal pouch with increased panel area Advanced Constant Heat sealing System Specially designed film roll unwinding mechanism for smooth bag pulling Operation with brake system. Independent drives for sealing ,Feeding & film feed operations for optimum performance Less floor space requirement for machine installation. Equipped with variable speed drive for flexibility to offer adjustable output for the machine Bag Unwinding by Lanatex belt drive through servo motors and control cards Flexible vertical seal jaw positioning to offer range of variable pack with offering Quick change-over facility Suitable for different range of packaging film i.e PE film with or with out Laminate Special safety card to control current for protection electrical / electronics equipment Adjustable bag length by PLC controlled via servo motors and control cards Linear weighing system for accurate dosing Independent temperature controller for both seal Jaw's security devise to protect the operator of the machine Electric Panel IP-54 Protection Standard Machine Packaging Capabilities Potato Chips, Snacks, Rice, Macaroni, Beans, Pasta, Dry Fruits, Pasta, Vermicelli, Candies & Confectionery products as well as all kinds of lightweight products. Technical Specifications Output Quantity: 50 g 2000 g Output: 20-55 bags/min Filler Accuracy: ± 5 gm Pack / Quantity Range: Min. Bag size (W x L) approx: 120 mm x 150 mm Max. Bag size (W x L) approx: 355 mm x 500 mm Packaging Material: Co-extruded 3 or 5 Layer PE Based or Laminated, Metalize, Aluminum Foil 60 to 140 microns Film Reel: Core dia 76 mm & Reel diameter 300 mm max Electrical Requirement: Input Supply: 380 V AC, 50 Hz, 3 ph + N + G Connected Load: 5.5 KVA Peak Power Rating: 5 KW Air Requirement: Air Pressure: 6 bar constant dry air Air consumption: 800 Ltr/min Machine Dimensions along with conveyor (W x D x H) approx.: 1110 mm x 1700 mm 2400 mm (1300 mm x 1956 mm x 3350 mm) for 5kg Weight: 600 kgs (Net) Optional Accessories Customised pack Size Photo mark Registration Unit for Panel Printed Films Automatic Pouch Counting System Inert Gas Flushing System Product discharge conveyor Date Coding System Extra Pneumatic Magazine Shaft Optional Film End Sensor UV Sterilisation of packaging film Special impulse sealing jaw Bucket elevator â?¢ Platform English Folding System Extra Conformer for different sizes Air release system Linear weigher
Salient Features Special multi head weigher control with load cell & stepper motor Operator friendly PLC controller with a user friendly GUI Pouch style options Center seal pouch with increased panel area Advanced Constant Heat sealing System Specially designed film roll unwinding mechanism for smooth bag pulling Operation with brake system. Independent drives for sealing ,Feeding & film feed operations for optimum performance Less floor space requirement for machine installation. Equipped with variable speed drive for flexibility to offer adjustable output for the machine Bag Unwinding by Lanatex belt drive-through servo motors and control cards Flexible vertical seal jaw positioning to offer range of variable pack with offering quick change-over facility Suitable for different range of packaging film i.e PE film with or with out Laminate Special safety card to control current for protection electrical / electronics equipment Adjustable bag length by PLC controlled via servo motors and control cards Multi head weighing system for accurate dosing. Independent temperature controller for both seal Jaw's security devise to protect the operator of a machine Electric Panel IP-54 Protection Standard. Machine Packaging Capabilities Potato Chips, Rice, Macaroni, Beans, Snacks Pasta, Dry Fruits, Vermicelli, Candies & Confectionery products as well as all kinds of lightweight of products. Technical Specifications Output Quantity: 15 g - 1000 g 30 - 85 Packs/min Filler Accuracy: ± 5 gm to 5 g Pack / Quantity Range: Min. Bag size (W x L) approx: 120 mm x 150 mm Max. Bag size (W x L) approx: 225 mm x 350 mm Packaging Material: Co-extruded 3 or 5 Layer PE Based or Laminated, Metalize, Aluminum Foil 40 to 120 microns Film Reel: Core Diameter 76 mm & Reel Diameter 300 mm max Electrical Requirement: Input Supply: 220 or 380 V AC, 50 Hz, 3 ph + N + G Connected Load: 3.5 KVA Peak Power Rating: 3 KW Air Requirement: Air Pressure: 6 bar constant dry air Air consumption: 800 Ltr/min Machine Dimensions along with conveyor (W x D x H) approx.: 1110 mm x 1700 mm x 2438 mm Weight: 700 kgs (Net) Optional Accessories Customised pack Size Photomark Registration Unit for Panel Printed Films Automatic Pouch Counting System Inert Gas Flushing System Product discharge conveyor Date Coding System Extra Pneumatic Magazine Shaft Optional Film End Sensor UV sterilisation of packaging film Special impulse sealing jaw Bucket elevator Platform English Folding System Extra Conformer for different sizes Air release system Linear weigher
Salient Features Special volumetric cup dozing system control by special gear motor Operator friendly PLC controller with a user friendly GUI Pouch style options Center seal pouch with increased panel area Advanced Constant Heat sealing System Specially designed film roll unwinding mechanism for smooth bag pulling Operation with brake system. Independent drives for sealing, Feeding & film feed operations for optimum performance Less floor space requirement for machine installation. Equipped with variable speed drive for flexibility to offer adjustable output for the machine Bag Unwinding by Lanatex belt drive through gear and servo motors Flexible vertical seal jaw positioning to offer range of variable pack with offering quick change-over facility Suitable for different range of packaging film i.e PE film with or with out Laminate Special safety card to control current for protection electrical / electronics equipment Adjustable bag length by PLC and servo motor and control cards Independent dozing system Independent temperature controller for both seal Centralized lubrication system Jaw's security devise to protect the operator of machine Film end sensor Electric Panel IP-54 Protection Standard. Machine Packaging Capabilities Rice, Sugar, Beans, Seeds, Salt, Tea, Spices, Pulses as well as all kind of granule products. Technical Specifications Output Quantity: 50 g - 2000 g 20 - 55 Bags/min Filler Accuracy: ± 5 gm Pack / Quantity Range: Min. Bag size (W x L) approx: 120 mm x 150 mm Max. Bag size (W x L) approx: 355 mm x 500 mm Packaging Material: Co-extruded 3 or 5 Layer PE Based or Laminated, Metalize, Aluminum Foil 60 to 140 microns Film Reel: Core Diameter 76 mm & Reel Diameter 300 max Electrical Requirement: Input Supply: 380 V AC, 50 Hz, 3 ph + N + G Connected Load: 5.5 KVA Peak Power Rating: 5 KW Air Requirement: Air Pressure: 6 bar constant dry air Air consumption: 800 Ltr/min Machine Dimensions along with conveyor (W x D x H) approx.: 1110 mm x 1700 mm x 2400 mm (1300 mm x 1956 mm x 3350 mm) for 5 Kg Weight: 600 kgs (Net) Optional Accessories Customised pack Size Photomark Registration Unit for Panel Printed Films Automatic Pouch Counting System Inert Gas Flushing System Product discharge conveyor Date Coding System Extra Magazine Shaft Programmer cam switch controller Impulse jaw Platform English Folding System Bucket Elevator Extra Dosing cup Extra Conformer for different sizes Air release system Special Weighing System
Salient Features Special volumetric cup dozing system control by special gear motor Operator friendly PLC controller with a user friendly GUI Pouch style options Center seal pouch with increased panel area Advanced Constant Heat sealing System Specially designed film roll unwinding mechanism for smooth bag pulling Operation with brake system. Independent drives for sealing ,Feeding & film feed operations for optimum performance Less floor space requirement for machine installation. Equipped with variable speed drive for flexibility to offer adjustable output for the machine. Bag Unwinding by Lanatex belt drive through gear and servo motors Flexible vertical seal jaw positioning to offer range of variable pack with offering quick change-over facility Suitable for different range of packaging film i.e PE film with or with out Laminate Special safety card to control current for protection electrical / electronics equipment Adjustable bag length by PLC and servo motor and control cards Independent dozing system Independent temperature controller for both seal Centralized lubrication system Jaw's security devise to protect the operator of machine Film end sensor Electric Panel IP-54 Protection Standard. Machine Packaging Capabilities Rice, Sugar, Beans, Seeds, Salt, Tea, Spices, Pulses as well as all kind of granule products. Technical Specifications Output Quantity: 1000 g -5000 g Output: 12-40 Packs/min Filler Accuracy: ± 5 gm Pack / Quantity Range: Min. Bag size (W x L) approx: 120 mm x 150 mm Max. Bag size (W x L) approx: 355 mm x 500 mm Packaging Material: Co-extruded 3 or 5 Layer PE Based or Laminated, Metalize, Aluminum Foil 60 to 140 microns Film Reel: Core dia 76 mm & Reel diameter 300 mm max Electrical Requirement: Input Supply: 380 V AC, 50 Hz, 3 ph + N + G Connected Load: 5.5 KVA Peak Power Rating: 5 KW Air Requirement: Air Pressure: 6 bar constant dry air Air consumption: 800 Ltr/min Machine Dimensions along with conveyor (W x D x H) approx.: 1110 mm x 1700 mm 2400 mm (1300 mm x 1956 mm x 3350 mm) for 5kg Weight: 600 kgs (Net) Optional Accessories Customised pack Size Photo mark Registration Unit for Panel Printed Films Automatic Pouch Counting System Inert Gas Flushing System Product discharge conveyor Date Coding System Extra Magazine Shaft Programmer cam switch controller Impulse jaw Platform English Folding System Bucket Elevator Extra Dosing cup Extra Conformer for different sizes Air release system Special Weighing System
BG-CGF6/6/1 type beer bottle washing filling capping monoblock is designed combined with the actual situation in our country after the introduction and absorption that comes from Germany technologies. It adopts isobaric filling principle and filling valve adopts high precision mechanical valve. It has advantages of fast filling speed, high precision in liquid level. Adopt Siemens automatic controlling system, realizing trinity of the machines, and control the washing, filling and capping process.
