Product Introduction TC4 titanium rod for aviation, also known as TC4 titanium alloy rod, Gr5 titanium rod, or Ti-6Al-4V titanium rod, the composition of titanium alloy TC4 material is Ti-6AI-4V, which belongs to (a²) type titanium alloy , with good comprehensive mechanical and mechanical properties. It has a series of advantages such as excellent corrosion resistance, small density, high specific strength, good toughness and weldability, and has been successfully applied in aerospace, petrochemical, shipbuilding, automobile, pharmaceutical and other departments. TC4 titanium rods for aviation are mainly used in petroleum exploration equipment accessories, aerospace, shipbuilding, titanium processing parts for automobiles, standard parts, customized parts, etc., with high strength, good toughness, excellent welding performance, and wide application. Product parameters Product name: TC4 titanium rod, TC4 titanium alloy rod for aviation 1. Grade National standard: TA1, TA2, TA3, TA9, TA10, TC4, TA18, ERTI-1, ERTI-2, Ti15333 American Standard: GR1, GR2, GR3, GR5, GR7, GR12, GR5, GR9 2. Manufacturing process: hot forging + turning (grinding) light 3. Delivery status R (hot working state) M (annealing state) 4. Diameter (mm): 1-200 5. Implementation standards: GB/T 2965, GB/T13810, ASTM B348, ASTM F136, ASTM F67, AMS 4928 Features Titanium rods have excellent properties such as high strength, good corrosion resistance, good low temperature performance, high chemical activity, and low thermal conductivity. Mechanical properties of TC4 titanium alloy: 1. Tensile strength b/MP 895, specified residual elongation stress 0.2/MPa 825, elongation 10, reduction of area 25 2. Density of titanium alloy: 4.5 (g/cm3), working temperature -100 550 3. TC4 titanium alloy chemical composition: TC4 contains titanium (Ti) balance, iron (Fe)
CDM Titanium is an approved ISO9001:2015 & PED 14/68 EU by TUV and a professional manufacturer and exporter of titanium material and product. We manufacture Titanium bar and titanium rod: Grade : GR1, GR2 , GR3, GR4, GR5, GR7, GR9,GR12,GR16,GR17 etc Forged Bar: diameter (26-200) Ã?? less than or equal to 4000 Rolled Bars: diameter (8-25) Ã?? less than or equal to 1500 Standard: ASTMB348, AMS4928, ASTM F67,ASTM F136, H7/h7 tolerance is available.
Product name:Pure Titanium bar/Pure Titanium rod/Titanium alloy bar/Titanium alloy rod Titanium Type:Commercially Pure(CP) / Titanium alloy Standard :ASTM B348/ASME SB348, ASTMF67, ASTM F136, ISO-5832-2(3), AMS4928, MIL-T-9047G, JIS etc Grade:Gr1 Gr2 Gr3 Gr4 Gr5 Gr6 Gr7 Gr9 Gr11 Gr12 Gr23 Ti15333 BT1-00 BT1-0 BT1-2 Length:Max6000mm Diameter:5-350mm Technique:Forging ,Machining Surface:Acid surface or polishing, sand blasted surface Shape:Round, flat, square, hexagonal Application:Metallurgy, electronics, medical, chemical, petroleum, pharmaceutical, aerospace, etc.
Product specification Titanium bar b348 gr5 8*3000mm Titanium bar b348 gr5 10*3000mm Titanium bar b348 gr5 12*3000mm Titanium bar b348 gr5 14*3000mm Titanium bar b348 gr5 16*3000mm Titanium bar b348 gr5 18*3000mm Titanium bar/rod: Namerod and bar Standardndustry:gb/t 2965 , astm b348 Medical:astm f67, atstm f136, iso 5832-2, iso5832-3 Aerospace: Grade:ta1, ta2, ta3, ta4, tc4, tc4 eli, ti-6al7nb (new materials Gr1, gr2, gr3, gr4, gr5(ti-6al-4v), gr5eli(gr23), Specification(diameter*l)(4.76-90.0)*(2000-3000)mm or according to customers requirements. Certificationso9001:2008, three party certification Toleranceh7-h10 Appearancerod/bar Statusm/y/t Applicationequipment accessories: airplane, ship, bicycle, motorcycle, auto, medical, chemical, wheelchair, sports, anchor, weapon, smelting, etc.Aerospace, industry, navigation, chemical plants, and so on. Packingdomestic: standard wooden carton packaging;overseas:fumigation Moq:100kg Delivery time10~15 work days Capacity: 10t/m
Size: dia 30mm, 40mm, 50mm, 70mm Application: Industrial, chemical industry, military industry, medical industry etc. Feature: high corrosion resistance, low density, good thermal stability Technics: hot rolling or cold rolling Surface: bright, polished, pickling, acid cleaning, sandblasting Packing: wooden case Moq: 500kg, sample request is available. Payment terms: t/t Delivery time: 5-40 days according to the quantity and process of the product
Titanium bar/Titanium metal rod StandardASTM B265 JIS H4600 GB/T 3620.1 ASTM Pure Ti: Gr.1 Gr.2 Gr.3 Gr.4 Ti Alloy: Gr.5 Gr.7 Gr.9 Gr.11 Grades JIS Pure Ti: Class 1 Class 2 Class 3 Class 4; JIS Ti Alloy: Class 60 Class 12 Class 61 Class 11 Class 60 E GB Pure Ti:TA1 TA2 TA3 TA4;Ti Alloy: TC4 TA9 TC2 TC4 ELI Shape Round Bar / Square Bar/ Hexagon Bar Diameter 1.0mm to 300mm Surface finishPolished Heat TreatmentUsually are Annealled,but Solid Solution & Aging can be also OK
Titanium Bar GR7 has excellent strength, hardness, lightweight, high-temperature resistance, low-temperature resistance, good mechanical processing performance, excellent corrosion resistance, non-magnetic and non-toxic, and good heat transfer performance. At the same time, it has memory and superconductivity. The composition of Titanium Bar GR5 is Ti-6Al-4V, which belongs to (α+β) type titanium alloy, with good comprehensive mechanical and mechanical properties. It has excellent corrosion resistance, small density, high specific strength, good toughness and weldability, and has been successfully applied in aerospace, petrochemical, shipbuilding, automotive, pharmaceutical and other sectors. The titanium round bar is mainly used in aerospace structures, engine parts, ships, medical implants and equipment, hydraulic and instrumentation pipes, cryogenic vessels, heat exchangers that require high strength. It is also used in a variety of chemical process equipment and ship and fuselage applications where corrosion resistance is required. Titanium Filler Rod is a hollow filter tube made of titanium powder by high temperature sintering. It is mainly used for titanium rod filters. It is non-toxic, non-magnetic, non-shedding, and has good bio-melting properties. Therefore, it is widely used in liquid-solid separation in food, beverage, pharmaceutical, chemical and other industries. It is especially suitable for decarbonization filtration in large infusion and injection production lines in the pharmaceutical industry. https://www.yunchtitanium.com/titanium-bar-1
Material: GR. 1, GR. 2, GR. 3, GR. 4, GR. 5, GR. 7, GR. 9(TI-3AL-2.5V), GR19. Titanium bar, titanium rod 1)size: diameter 8-200mm, length as customer`s requirements(up to 6100mm) 3)standards: ASTM B348, ASME SB348, AMS 4928, ASTM F67, F136 4)surface: brightness, pickling 5)packing: export case 6)process method: hot rolling 7)moq: 50kg (sample is available ) 8)trade term: fob shanghai 9)delivery time: 7-20days 10)mtc available.
We hold immense expertise in making available Copper in many forms including LME registered and non registered cathodes, billets, rods, cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire, insulated wire, mesh and “evaporation slugs”. Copper is one of the most important metals. Copper is reddish with a bright metallic lustre. It is malleable, ductile, and a good conductor of heat and electricity (second only to silver in electrical conductivity). Its alloys, brass and bronze, are very important. Monel and gun metals also contain copper. The most important compounds are the oxide and the sulphate, (blue vitriol
Steel
We offer a wide plethora of Zinc in many forms including LME registered and non registered Special High Grade Ingots and Jumbos, cathodes, dust, foil, granules, powder, pieces, anodize activated powder, shot, and a mossy form. Zinc is a bluish-white, lustrous metal. It is brittle at ambient temperatures but is malleable at 100 to 150°C. It is a reasonable conductor of electricity, and burns in air at high red heat with evolution of white clouds of the oxide. Plating thin layers of zinc on to iron or steel is known as galvanizing and helps to protect the iron from corrosion.
We are able to supply Tin in many forms including LME registered and non registered, ingots, slabs, bars, foil, granules, powder, anodized activated powder, shot, wire, sticks, ingots, and “mossy tin”. Tin is a silvery-white metal, is malleable, somewhat ductile, and has a highly crystalline structure. The element has two colours, with a cubic structure which changes at allotropic forms. On warming it is grey, the ordinary form of the metal. When Tin is cooled below 13.2°C, it changes slowly from white to grey or tetragonal structure. This change is affected by impurities such as Aluminium and Zinc, and can be prevented by small additions of Antimony or Bismuth.
We put forward a high quality of assortment of Nickel which is available in many forms including LME registered and non registered cathodes, cut cathodes, briquettes, pellets, disks, shots, granules, foil, powder, flakes, sheet, wire, mesh, spheres, “evaporation slugs”, and rods. Nickel is a silvery white metal that takes on a high polish. It is hard, malleable, ductile, somewhat ferromagnetic, and a fair conductor of heat and electricity
We are engaged in making Lead available in several forms including LME registered and non registered 99.97% and 99.99% as well as secondary ingots, foil, granules, powder, rod, shot, sheet, and wire. Lead is a bluish-white lustrous metal. It is very soft, highly malleable, ductile, and a relatively poor conductor of electricity. It is very resistant to corrosion but tarnishes upon exposure to air. Alloys include pewter and solder.
Standard: GB/T 2965-2007, GB/T 13810-2007, ASTMB348/ASME SB348, ASTMF67, ASTMF136, ISO-5832-2(3), AMS4928, MIL-T-9047,JIS.etc Grade: TAL- TA4,TA8-TA10, TA15-TA18, GR1-GR5, GR7, GR9, GR11, GR12, TL-6AL-4V,TL-6AL-4V ELI Diameter: 1.0-300mm Length : 1000mm- 12000mm Technique: Hot Forging& cold rolling Surface: Bright Application : Metallurgy, electronics, Medical , chemical petroleum, pharmaceutical, aerospace, etc
Titanium Bar/Rod Products Details Place of Origin: China (Mainland) Brand Name: TXM Model Number: YZ-Ti-BAR Application: Industrial Shape: Round Length: MAX:6000mm Technique: Forged Grade: Titanium weight: D*D*3.542*L/1000000 Product name: High Quality ASTM B348 gr2 gr5 forged round Titanium Bar for sale Standard: ASTM B348 AMS4928 ASTM F136 ASTMF67 Surface: acid surface or polishing, sand blasted surface Test Report Support: Chemical Position Mechanical Prosperity Certificate1: ISO 9001:2008 Certificate2: SGS Color: Metallic Condition: R M Y Tolerance1: h6~h13 Tolerance2: H10~H13 Diameter: 5~350mm
We have a wide variety stock of rebar, available dimensions from 8 mm to 32 mm,grades 60,40 ASTM A615,and BS4449, lengths 4,5,6,9,and 12 meters,plain,and deformed bars. Material SD390/490/400,B500B/GR460B,HRB400/500,ASTM A615 GR40/60 Standard BS4449,JIS,ASTM/A615 Length 6m,12m Application Widely used in construction industry.
We deals in the following products of India, China, Taiwan and Korea Origin:- 1)Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc) 2)Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc) 3)Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc) 4)Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc) 5)Steel Tube and Pipes ( ERW, CRW, CRS, Black, Galvanized, Stainless ) 6)Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps. 7)Heavy Duty Props & Light Duty Props. 8)Nuts, Bolts, Nails & Fastners 9)System Scaffolding, Base Plate & Adjustable Base. 10)Steel Tie Rod, Waller Plates and Wing Nuts. 11)Drop Forged and Pressed Sheet Metal Couplers of all types. 12)Steel Billets, Steel Angle & Steel Channels.
Feature of titanium bar&rod High strength; Fine corrosion resistance; Low density, light weight; High/low temperature resistance; High resistance to strong acid.
1. Product name: titanium round bar, titanium rod 2. Grade: gr1, gr2, gr3, gr4, gr5, gr6, gr7, gr9, gr12, gr23 3. Standard: astm b348, ams 4928, astm f67, astm f136 4. Supply status: r or m or y 5. Specification: diameter: 5mm-350mm, length: max.6000mm 6. Application: machinery equipment, electroplating equipment, medical, all kinds of precision machinery part etc. -
