Araldite Gy 891 (Epoxy Adhesive + Hardener) Suppliers and Manufacturers

CAS No. 24969-06-0 Other Names : POLYEPICHLOROHYDRIN MF [CH(CH2Cl)CH2O]n EINECS No. 500-033-5 Place of Origin : China Hebei Main Raw Material : Epoxy Usage : Construction Type : Adhesives & Sealants Appearance : Liquid Product name : epoxy Resin Application : Adhesives & Sealants

CAS 105-46-4 HS code 2915390090 Packaging: 180kg/drum, 14.4tons per 20'FCL The application of Sec-butyl acetate is as below: 1. Used as coating solvent: Sec-butyl acetate is similar to n-butyl acetate and isobutyl acetate in solubility, and can be used as a substitute for n-butyl acetate and isobutyl acetate in coating formulations. 2. Sec-butyl acetate is widely used as a solvent for nitro paint, acrylic paint, polyurethane paint, polyester paint, amino paint, epoxy paint and other paints. 3. Used as a solvent in the manufacturing process of synthetic resins 4. Used as a solvent in the hardener manufacturing process 5. As an ink solvent, it can completely replace n-butyl acetate as a volatile solvent in printing ink 6. Used as a solvent in the adhesive manufacturing process 7. Used as diluent: Sec-butyl acetate is an ideal component with low cost and low toxicity in diluents such as tenna water and banana water. 8. Used as cleaning agent: sec-butyl acetate can be used to configure washing net water, washing mold water, washing plate 9. Used in pharmaceutical industry: sec-butyl acetate can be used as an extraction agent in the production process of antibiotics, hormones and vitamins; Due to its moderate volatilization rate, it has good skin permeability, and can also be used as a drug absorption promoting component 10. Used as fine chemical: sec-butyl acetate can be used as fine chemical extraction agent, such as extraction separation of ethanol-propanol, acrylic acid and other substances; It can also be used as azeotrope in acetic acid recovery and other processes. 11. Used in the cosmetic industry, such as in the manufacture of nail polish. 12. Used in fragrance industry: sec-butyl acetate has a special fruit smell, can be used as a fragrance 13. Sec-butyl acetate can also be used in the manufacturing process of rubber, safety glass, coated paper, solar lamp tube and other products.

Acetona is an important raw material for organic synthesis, which is used in the production of epoxy resin, polycarbonate, plexiglass, medicine, pesticide, etc. It is also a good solvent for coatings, adhesives, cylinder acetylene, etc. Also used as diluent, cleaning agent, extractant. It is also an important raw material for manufacturing acetic anhydrides, diaceton alcohol, chlorofor, iodoforms, epoxy resin, polyisoprene rubber, methyl methacrylates, etc. It is used as solvent in smokeless powder, celluloid, acetate fiber, spray paint and other industries. It is used as extractant in oil industry. It is used to produce organic chemical raw materials such as organic glass monomer, bisphenol A, diaceton alcohol, hexanediol, methyl isobutyl ketones, methyl isobutyl methanos, folone, isophorone, chloroforms, iodoforms, etc. It is used as an excellent solvent in coating, spinning process of acetate fiber, acetylene storage in steel cylinder and dewaxing in oil refining industry.

1. Description: It is the raw material for making thermosetting resin, light curing epoxy resin coating, oil resistant coating and drying coating. Its copolymer emulsion is used for fiber finishing, fabric, leather and paper coating. Also used as wood, metal and other adhesives. 2. Typical recipes Used as crosslinked monomer in acrylic emulsion. The amount of carboxyl-containing acrylic emulsion pressure-sensitive adhesive is L % ~ 2% of the total monomer mass, and the initial adhesion will be greatly reduced if it exceeds 3%. For emulsion adhesives without carboxyl group, the general dosage is not more than 5%. The crosslinking reaction temperature of MMAM alone is high, generally 120 ~ 170�ºC, and the addition of protic catalyst can reduce the crosslinking temperature. Acrylic acid (AA) can both provide hydrogen protons and copolymerize with acrylates, so MMAM should be used as a composite crosslinking agent with AA at a dosage of 3:2. Cross-linking agent HA can replace N- hydroxymethyl acrylamide, and does not contain formaldehyde. 3. Application scope A. Can be used as crosslinking agent, widely used in fiber modified resin, processing dyes, plastic adhesives, soil stabilizers, etc. B. Used for fiber modification, resin processing, adhesives and paper, leather, metal surface treatment agent. Free samples 4. Storage and packaging A. All emulsions/additives are water-based and there is no risk of explosion when transported. B. This product can be packed in 25KG,50KG,200KG,1000KG plastic barrels. C. Store sealed in a cool, dry and ventilated place indoors. Before use, the container should be strictly sealed after each use. D. The product should be well sealed during transportation, moistureproof, alkali strong acid and rain water and other impurities mixed.

Product Introduction: Polyamide, commonly known as nylon, is a general term for polymers containing amide groups in the repeating units of the main chain of macromolecules. Polyamide can be obtained by ring opening polymerization of internal acid amines, or by condensation polymerization of diamines and dicarboxylic acids. Polyamide (PA) refers to a polymer with a polar amide group (- CO-NH-1) in its main chain segment. Product features: 1. Excellent mechanical properties. Nylon has high mechanical strength and good toughness. 2. Good self lubrication and friction resistance. Nylon has good self lubrication and low friction coefficient, making it a long service life as a transmission component. 3. Excellent heat resistance. High crystalline nylon such as nylon 46 has a high thermal deformation temperature and can be used for a long time at 150. After being reinforced with glass fiber, the thermal deformation temperature of PA66 reaches above 250 4. Excellent electrical insulation performance. Nylon has a high volume resistance and high breakdown voltage resistance, making it an excellent electrical and electrical insulation material. 5. Excellent weather resistance. 6. Water absorption. Nylon has a high water absorption capacity, with saturated water reaching over 3%. To a certain extent, it affects the dimensional stability of the workpiece. Product Usage: Used as a room temperature curing agent for epoxy resin. Used as a curing agent and toughening agent for epoxy resin, and as a cable sealing material. Mainly used in the production of adhesives, coatings, sealing gaskets, etc

Glycol Ether EB is a colorless liquid that works as an excellent solvent used in wax strippers, cleaners, degreasers, inks, water based paints, coatings, varnishes, enamels, and lacquers. It is used as a solvent for coatings resins like alkyd, phenolic, maleic, epoxy, and nitrocellulose resins. It acts as an ingredient in antimicrobial agents, adhesives, stabilizers, defoamers, drilling stabilizers, oil slick dispersants, and water- and oil-based fracturing fluids. Glycol Ether EB is an important component in household and industrial cleaners, enhancing wetting and cleaning ability. It's used in a variety of , sunscreens, cosmetics, inks, dyes and household & industrial cleaners. Sales Specification Appearance: Clear liquid Purity: 99.50 % Color (APHA): 10 Moisture: 0.10 % Acidity as acetic acid: 0.01 % Packing 407.85 lb drum each, 4 drums per pallet. 1984.14 lb tote DOT Transportation UN Number: NA1993 Proper Shipping Name: Combustible liquid, n.o.s., (2-PROPANOL, 1-BUTOXY-) Hazard class: CBL Packaging Group:III

Product Name Diphenylacetonitrile / Benzene-acetonitrile, alpha-phenyl CAS NO. 86-29-3 Appearance Colorless Liquid Purity 99% Density 1.1061 Melting Point 71-73 �°C Boiling Point 181 �°C/12 mmHg Flash Point 120 �°C Refractive Index 1.5850 Vapor Pressure 21.3 hPa (190 �°C) Acidity Coefficient (pKa) 9.30�±0.10 Application Chemical raw materials;Amines Usage 1. It can be used as a herbicide, used for turf prevention and control of young grasses before germination, used for synthesizing isocyanates, and further prepared into UV coatings, PU paints, transparent elastomers and adhesives, etc. 2. Used in polyamide and epoxy resin industries Use as an intermediate in organic synthesis. 3. In medicine, it is used to produce gastric amine, phenethylpiperidine, and other drugs such as pain relief. Storage Keep in dark place,Inert atmosphere

Tricyanic acid Product specifications: Molecular formula: C3H3N3O3 Molecular weight: 126.583 CAS Number: 108-80-5 Density: 2.0±0.1 g/cm3 Melting point: 360 C Boiling point: 793.4±43.0 C at 760 mmHg logP: -1.41 Flash point: 433.6±28.2 C Appearance: White crystalline granular or powder Solubility: Slightly soluble in water, slightly soluble in ethanol, soluble in concentrated sulfuric acid, hot inorganic acid Main features: 1, reasonable price, stable quality, short delivery time 2. Timely follow up orders and arrange delivery according to the policies of different countries, and provide complete customs clearance documents 3. Can inform customers of market price trend in time 4. Any inquiry will be answered within 12 hours Product application: For the synthesis of chlorine derivatives, salts, lipids; Trichloroisocyanuronic acid; Sodium or potassium dichloroisocyanurate; Used for synthesis of cyanuric acid-formaldehyde resin; Epoxy resin; Antioxidant; Paint; Paint; Adhesive; Pesticides and herbicides; Metal cyanide corrosion inhibitor; Polymer material modifier, etc.; It is used in the production of drug halotrihydroxyzine. Synthetic new bleach agent; Can be used in swimming pool chlorine stabilizer, sterilization, decontamination; It can also be directly used for nylon, Saik, combustion agents and cosmetic additives, laminated plastic materials and high temperature glass steel and other raw materials.