Bronze Sleeve Packed Water Level Gauge Rating : Max. BOP 250 PSIG (17.24 Bar) at 435 F (225 C) Material : Bronze Description : Consisting of Steam Arm, Water Arm, Drain Cock, Left & Right Hand Type Ends : Screwed Specials : IBR Item Code : BM000057, BM000058 Size : 15mm Notes : Available Valve Size : 15mm to 20mm
Bronze Sleeve Packed Water Level Gauge Rating : Max. BOP 250 PSIG (17.24 Bar) at 435 F (225 C) Material : Bronze Description : Consisting of Steam Arm, Water Arm, Drain Cock, Left & Right Hand Type Ends : Flanged Specials : IBR Item Code : BM000055, BM000056 Size : 15mm Notes : Available Valve Size : 15mm to 20mm
Cast Iron Dual Plate Check Valve API 594 Pressure Rating : PN-16 Material : Cast Iron / Ductile Iron Description : Spring Loaded, Retainerless Design Disc : Ductile Iron / SS 304 / SS 316 Spring : SS 316 Body Seat : Resilient (BUNA-N / EPDM) Ends : Wafer Type, Lugged, Flanged Item Code : CI000085 Size : 50mm Notes : Available Valve Size PN-16 50mm to 900mm PN-25 50mm to 900mm PN-125 50mm to 900mm
Cast Steel Dual Check Valve (Retainerless Design) API 594 Pressure Rating : Class-150 Material : Cast Steel (WCB) Description : Spring Loaded, Retainerless Design Ends : Wafer, Lugged, Flanged Specials : IBR Item Code : CCS00069 Size : 50mm Notes : Available Valve Size : CLASS -150 40 mm to 1200mm CLASS -300 40 mm to 900mm CLASS -600 40 mm to 900mm Material : LCB, WC1, WC6, WC9, C5, C12, C12A, CF8, CF8C, CF8M, CF3, CF3M, CN7M, CF10, CF10M, 3A, 4A, 5A, 6A etc.
Forged Steel Gate Valve API 602, BSEN ISO 15761, ASME B16.34, BS 6364 Pressure Rating : Class-800 Bore : Full & Regular Material : Forged Steel (A105) Description : Bolted Bonnet, OS & Yoke Type, Rising Stem (Welded Bonnet for CL-1500 & 2500) Ends : Socket Weld, Butt Weld, Screwed Operator : Hand wheel, Electric Specials : Stem Extension, LT & Cryo, Fire Safe, Seismic, FET, TAT, IBR Item Code : FCS00002 Size : 15mm Notes : Available Valve Size : CLASS-800 8mm to 50mm CLASS-1500 15mm to 40mm CLASS-2500 15mm to 25mm Material : LF2, F5, F9, F11, F22, F304, F304L, F304H, F316, F316L, F316H, F91, F51, F321H, F321
Cast Steel Ball Valve API 6D, BSEN ISO 17292 Pressure Rating : Class-150 Bore : Full & Regular Material : Cast Steel (WCB) Description : Two Piece Antistatic Design, Floating Ball, Anti Blowout Proof Stem Design Body Seat : PTFE, RPTFE, Peek Ends : Flanged, Butt Weld Operator : Lever, Gear, Electric, Pneumatic Specials : Fire Safe, IBR Item Code : CCS00016 Size : 15mm Notes : Available Valve Size : CLASS-150 15mm to 200mm CLASS-300 15mm to 200mm CLASS-600 15mm to 150mm Material : LCB, CF8, CF8M, CF3, CF3M, CN7M, CF10, CF10M, 3A, 4A, 5A, 6A etc.
Cast Steel Swing Check Valve API 6D, BS 1868, ASME B16.34 Pressure Rating : Class-150 Material : Cast Steel (WCB) Description : Swing Type, Bolted Cover (Pressure Seal Cover CL-900, 1500 &; 2500) Ends : Flanged, Butt Weld Specials : Fire Safe, Dash Pot Arrangement, By pass Arrangement, IBR Item Code : CCS00007 Size : 50mm Notes : Available Valve Size : CLASS-150 40mm to 900mm CLASS-30040mm to 950mm CLASS-600 40mm to 600mm CLASS-900 40mm to 600mm CLASS-1500� � 40mm to 600mm CLASS-2500 50mm to 300mm Material : LCB, WC1, WC6, WC9, C5, C12, C12A, CF8, CF8C, CF8M, CF3, CF3M, CN7M, CF10, CF10M, 3A, 4A, 5A, 6A etc.
API 600, BS 1414, ASME B16.34, BS 6364 Pressure Rating : Class-150 Material : Cast Steel (WCB) Description : Bolted Bonnet, OS & Yoke Type, Rising Stem (Pressure Seal Bonnet CL-900, 1500 & 2500) Ends : Flanged, Butt Weld Operator : Hand wheel, Gear, Electric, Chain Wheel Specials : Stem Extension, LT & Cryo, Fire Safe, Seismic, FET, TAT, By pass Arrangement, IBR Item Code : CCS00001 Size : 50mm Notes : Available Valve Size : CLASS-150� � � � 40mm to 1200mm CLASS-300� � � � 40mm to 900mm CLASS-600� � � � 40mm to 900mm CLASS-900� � � � 40mm to 900mm CLASS-1500� � 40mm to 600mm CLASS-2500� � 40mm to 400mm Material : LCB, WC1, WC6, WC9, C5, C12, C12A, CF8, CF8C, CF8M, CF3, CF3M, CN7M, CF10, CF10M, 3A, 4A, 5A, 6A etc.
Description: Kelly Cock valve is an effective manually operated ball type valve for the drill stem. It located within the drill string that allow for free-passage of drilling fluid without pressure loss and are specifically designed for effective control of blow outs and/or mud loss control. The kelly valve is divided into upper kelly cock valve and lower kelly cock valve. The upper kelly cock is connected between lower end of swivel and upper end of kelly; the lower kelly valve is connected between lower end of kelly saver sub. The kelly valve can be opened on or closed off by only turning the special operating wrench at 90° according to indicating direction. During drilling operation, both upper and lower Kelly cocks should be connected to prevent accident during drilling operation.
Peritoneal Dialysis Set Product Code: MED 172 Specifications: Sterile, medical grade paper pouch with standard plastic film Description Manufactured from Non-Toxic & Non-Irritant PVC. Extra soft kink-resistant frosted tubing, Sterile Pack â?? ETO (Ethylene Oxide) Sterilization Specially designed â??Yâ?? shape transfusion set for administering dialysis solutions. Provided with two upper control clamps to facilitate the alternative change of solution bottles. Two lower control clamps help easy input and drainage of solution. Proximal end is provided with suitable adaptor for easy connection to Catheter.
Urine Collecting Bag with Volume Meter Three Chambers System Product Code: MED 129 Specifications: Sterile, individually packed in peelable blister pack Size/Strength: Bag Capacity 2600 ml, Measuring Meter 400ml, Tube Length 120-170cm cm Description Measuring Meter: 400ml Urine collection bag for convenient drainage of urine. Inlet tube 120cm-170cm Sampling Port Bed-Sheet Clamp Drainage control knob effectively drains urine. Hanger & string for convenient and firm fixing of the urine meter to the upper side frame of the bed. Anti-reflux drip chamber. Exact and fine scaling for timed measurements Urine sampling points at connector and measuring glass Germs- and liquid tight, hydrophobic coated filter for pressure equalization Long, highly flexible and bend-protected tube Single hand, easily operated outlet valve Sterile by EO
Product Specification Power Range : 1.0 HP to 2.0 HP Operating Speed : 0 - 3100 RPM DC Power Range : 900 Wp - 2000 Wp DC Voltage Range : 70 Vmp - 110 Vmp Head Range : 30 Mtr - 90 Mtr Discharge Range : 8000 LPD - 30000 LPD Type of Duty : S1 - Zero Running Cost - Less Maintenance - Eco-Friendly - Simple Installation - Pollution Free Material Of Construction - Motor Part Grade Mechanical Seal : Graphite Ceramic Motor Shaft : Stainless Steel Motor Body Pipe : SS-304 Lower Hosing : Aluminum Diaphragm : High Nitrile butyl rubber Top Cap : Stainless Steel Bottom Plate : Stainless Steel End Cap : Stainless Steel MATERIAL OF CONSTRUCTION SCREW (HELICAL) PUMP Part Grade Outlet : SS-304 Suction : SS-304 Outer Shell : SS-304 Rotor Screw : Stainless Steel Stator : Rubber Coated Alloy MATERIAL OF CONSTRUCTION â?? CENTRIFUGAL PUMP Part Grade Check valve housing : SS-304 Check valve : PC Suction : SS-304 Outer Shell : SS-304 Impeller : POM Bowl : PC Pump Bush : NBR Pump Sleeve : Stainless Steel Pump Shaft : Stainless Steel Coupling / Pump Couple : Stainless Steel
ESPO (Eastern Siberia-Pacific Ocean) oil is a premium blend of crude oil primarily exported from Russia. This light, sweet crude has gained significant traction in the global market. ESPO oil is extracted from fields in Eastern Siberia and transported via the Eastern Siberia-Pacific Ocean pipeline. Pipeline: The ESPO pipeline, stretching from Taishet in Irkutsk Oblast to the Pacific port of Kozmino, facilitates the transportation of this crude. ESPO crude has an API gravity typically around 34-35 degrees, classifying it as a light crude oil. It has a low sulfur content, usually between 0.5% and 0.6%, making it a sweet crude. This low sulfur content is advantageous for refining into high-quality fuels with lower environmental impact. ESPO oil is known for its low metal and salt content, further enhancing its desirability for refineries seeking to produce cleaner fuels. ESPO crude often commands a premium price compared to other Russian crude grades like Urals, due to its superior quality and favorable location. Pricing for ESPO oil is typically benchmarked against Dubai/Oman crude prices. Espo has low sulfur content in ESPO oil translates to lower sulfur dioxide emissions when refined, contributing to reduced environmental impact compared to higher sulfur crude oils. Price: FOB $68/$64 CIF $65/$61 Availability: In Stock Origin: Russia / Kazakhstan. For more details contact us.
Salient Features Highly efficient 3-phase water filled motor - Easily rewindable - Dynamically balanced design - Extended life with flawless performance - Thrust bearing : Carbon + S.S. material for High thrust load capacity - 100% EC grade copper winding - Presenting world 1st design (design registered 100% fully S.S.-304 investment casting pumps. - Zero maintenance - Superior performance - Sand proof operation - Highly efficient 3-phase water filled motor Product Specification Power Range : 1.0 HP to 20.0 HP Operating Speed : 0 - 2890 RPM Operating Frequency : 0 - 50 Hz Input Solar DC Power Range : 900 Wp, 20000 Wp Input Solar DC Voltage Range : 110 Vmp - 600 Vmp Head Range : 30 Mtr , 220 Mtr Discharge Range : 10000 LPD - 420000 LPD Type of Duty : S1 material of construction - motor Part Grade Body Lock : Spring Steel Stud Ring : M.S. (Zinc Coated) Stator Stamping : CRNGO - M45 Silicon Winding Wire : 100% EC Copper Shaft : SS-420 Rotor Stamping : CRNGO - M45 Silicon Copper Lamination : 100% EC Copper Upper Housing : SS-304 Lower Housing : SS-304 Connection Piece : SS-304 Oil Seal : NBR TB Set : Carbon + SS Base : SS-304 Drain Plug : Brass Couple Sleeve : Stainless Steel Water Bolt : Brass MATERIAL OF CONSTRUCTION PUMP Part Grade Suction : SS-304 Couple : Stainless Steel Couple Counter : SS-304 Rubber Seal : NBR Bush Seal Cover : SS-304 Bowl : SS-304 Impeller : SS-304 Key : SS-410 Bowl Bush : NBR Bush : LTB-4 Middle : SS-304 Cap : NBR Outlet : SS-304
API 602 Gate Valve Main features * Bolted body-bonnet design for valves up to Class 800, 1500, 2500, 4500. Valves with welded bonnet also available on request * Screwed with a seal-welded body-bonnet design for valves of Class 1500,2500, 4500. * Bellows-sealed Gate and Globe valves available in Class 800 * Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks * Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor * T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 * Rolled ACME thread on stem for smooth operation * Tapered shoulder on the stem for back seating * Self-aligning type gland assembly with stud-and-nut tightening * Integral hard-faced body seat for globe and check valves * Spring-loaded disc on check valves suitable for no horizontal applications too * Gate and globe valves can be offered with electrical actuators * Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion * Valves can be offered to NACE MR-0175 and other special NACE requirements
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size �¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
Product Description : Korean Red Ginseng Candy Country of origin : Korea Main ingredients : red ginseng extract (red ginseng ingredient: 70mg/g or more, solid, Korea), white sugar, ion starch syrup, herb, fragrance L-menthol, etc. Specification : 320g Content per carton : 80(bags)/BOX Expiration date : 2 years Product summary : Red ginseng extract is added to everyone's favorite candy for continuous supply of red ginseng ingredients. This product is enjoyable by men and women of all ages. Intake and Caution : - Take adequate quantity any time and anywhere without upper or lower (limits.) - Unique red ginseng flavor is ideal for breath freshener after meal or easing boredom. - Those who have weak teeth are recommended to melt it slowly in the Care needs to be taken for infants not to swallow it. (mouth.)
White Refined Sugar (ICUMSA 45), origin Brazil. Specifications : Fit for Human Consumption HS Code : 17019910 white refined Sugar Sucrose minimum 99.5% Polarity at 20C : 99.80 Min. Ash Content : 0.04% Max. Moisture : 0.04% Max. Solubility : 100% Dry and Free Flowing Granulation : Fine ICUMSA : Max 45 ICUMSA, Attenuation Index Method No. 4 - 1978 Sediments : None Color : Crystal Sparkling White Crop : Correspondent for the Year in Course SO2 : Mg/Kg 20 Radiation : Normal International/Without Presence of Cesium or Iodine Iodine : Certified Smell : Free of Any Smell Reducing Sugar : 0.010% Max Substance : Solid Crystal Max AS : 0.5 P.P.M. Max PB : 0.5 P.P.M. Max CU : 1 P.P.M. HPN : Staph Aureus Nil Mold & Yeast : UFS/10g 10 Maximum Cubed Poisonous Seed/Husks : Phytosanitary Certificate of no Radiation, no Virus, no Insect Parts, no poisonous Matter, and non-genetically Modified material and is Suitable for Human Consumption. Packing : Sugar needs to be packed in 50 Kg net new sacks made of anti-slip, woven PP with a minimum weight of 85g/m2, with a polyethylene inner pocket welded to the bottom, 50 microns LPDE of 30 microns HPDE. Sacks made of woven PP are to be given a special food-grade "ultraviolet" treatment. The lower and upper edges are to be stitched together with the PE sack. They should correspond to EN standards 277. Two (2%) percent sparebags printed with the requested marking must be shipped along with the cargo free of charge.
* The SQK API 603 Gate Valve is exceptionally sturdy, rugged, and durable, with a reputation for quality, integrity, and long service. * They are designed for tight sealing and ease of operation. The valves are available flanged & butt-weld ends in pressure rating from ASME Class 150 to Class 2500, and in a variety of materials of construction. * Gate Valves are of flexible wedge design, outside screw and yoke, and bolted-bonnet construction. The valves conform to SQK OS & Y Gate Valve. Main features * Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet * Bellows-sealed Gate and Globe valves available * Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks * Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor * T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 * Rolled ACME thread on stem for smooth operation * Tapered shoulder on the stem for back seating * Self-aligning type gland assembly with stud-and-nut tightening * Integral hard-faced body seat for globe and check valves * Spring-loaded disc on check valves suitable for no horizontal applications too * Gate and globe valves can be offered with electrical actuators * Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion * Valves can be offered to NACE MR-0175 and other special NACE requirements