The used tricone bits are much more cheaper than the new ones because of the cost is low, but the quality is promised. 30*35*40cm 45kg
1.PDC drill bit is super hard material combined with diamond and hard alloy under high temperature and high pressure. 2.It not only has the advantages of hard and durable from diamond, but also has the advantages of high impact resistance and big blade from hard alloy. 3.It greatly improves the drilling efficiency and is the ideal drill bit for the drill operation of medium & hard as well as super hard rock. The carrier of PDC bits is forged and pressed by first-class steel. 4. Its mechanical capacity is strengthened by fully automatic vacuum heat treatment equipment.
A. Selected higher quality diamond powder, improved the sintering technique, enhanced the bond combination strength between diamond grain; B.Improved the inner structure of the sintered cavity, the pressure and temperature become more balance, which ensure the cutter has more stable performance; C.Adopted a new type of carbide, which improved the weld strength; D.Optimized the designation of joint face, which reduced the residual stress.
Welcome to visit Ruilong PDC drill bit page ! Ruilong Drill had produced PDC drill bit for more than 20 years in China . Trust us will offer you the right PDC drill bit and support your project work . How to choose the right PDC drill bit?drilling pipe hole cutter drag knife drill well pdc bit 1,Whats the diameter of hole do you want to drill ? Then we can know which item drill bit is suitable you . 2,Whats the layer do you want to drill ? Then we can know which PDC tip is right for you .
Bit specification Bit type 8-1/2" gs1615s Iadc code S223 Blade 5 Cutter size (mm) Φ16mmï¼?î¦13mm Cutter qty Φ16ã?26ï¼?î¦13ã?15 Nozzle qty 7nz Gauge length (mm) 45 Connection 4-1/2" api reg N.W./g.W. (kg) 48/63 Nozzle size(inch) 16/32ï¼?18/32 Great pdc bit advantage  Equipped for performance great pdc bits are equipped with 1.High abrasion tungsten carbide material, hardened alloy steel base material 2.High performance pdc-cutters 3.Carbide and diamond gauge protection 4.Carbide/diamond shock studs 5.Threaded or plain carbide nozzles for flushing Above features are subject to changes and modifications according to customers' requirements. -
Bit specification Bit type 8 1/2" gs1616tz Iadc code S423 Blade 6 Cutter size (mm) Φ16mmï¼?î¦13mm Cutter qty Φ16ã?36ï¼?î¦13ã?36 Nozzle qty 8nz Gauge length (mm) 60 Connection 4-1/2" api reg N.W./g.W. (kg) 51/66 Nozzle size(inch) 16/32 Greatâ pdcâ bitâ advantageâ   equippedâ forâ performanceâ â greatâ pdcâ bitsâ areâ equippedâ with 1.Highâ abrasionâ tungstenâ carbideâ material, â hardenedâ alloyâ steelâ baseâ material 2.Highâ performanceâ pdc-cutters 3.Carbideâ andâ diamondâ gaugeâ protection 4.Carbide/diamondâ shockâ studs 5.Threadedâ orâ plainâ carbideâ nozzlesâ forâ flushing  aboveâ featuresâ areâ subjectâ toâ changesâ andâ modificationsâ accordingâ toâ customers'â requirements. Our service: 1ã?�24 hour uninterrupted serviece, answer your questions in a timely manner 2ã?�warm welcome guests to visit 3ã?�one of the largest manufacturer and supplier in asia.High technology, high quality 4ã?�flexible production 5ã?�sincerely cooperate with you 6ã?�service to customer satisfaction -
BIT SPECIFICATION Bit Type 161mm" GS1304 IADC Code S132 Blade 4 Cutter Size (mm) Φ13MM Cutter Qty Φ13�28 Nozzle Qty 4P Gauge Length (mm) 45 Connection 3-1/2" API REG N.W./G.W. (KG) 16.3/18.8 Steel body Steel body fixed cutters are made from a high alloy steel. Advanced machining technology has improved the manufacturing precision remarkably. Great with advanced 5 axes and 3 axis digital mills . Packaging & Delivery Packaging Details: wooden case, also according to your request Delivery Detail:5-7Days  1.GREAT PDC bit Advantage  Equipped for Performance Great PDC Bits are equipped with 1.High Abrasion tungsten carbide material, Hardened Alloy Steel base material 2.High performance PDC-Cutters 3.Carbide and Diamond gauge protection 4.Carbide/Diamond Shock Studs 5.Threaded or Plain Carbide Nozzles for Flushing
BIT SPECIFICATION Bit Type 220.7" GS1604Q IADC Code S223 Blade 4 Cutter Size (mm) Φ16MM;Φ13MM Cutter Qty Φ16�16;Φ13�25 Nozzle Qty 6NZ Gauge Length (mm) 55 Connection 4-1/2" API REG N.W./G.W. (KG) 47/62 Nozzle Size(inch) 16/32;18/32 .GREAT PDC bit Advantage  Equipped for Performance Great PDC Bits are equipped with 1.High Abrasion tungsten carbide material, Hardened Alloy Steel base material 2.High performance PDC-Cutters 3.Carbide and Diamond gauge protection 4.Carbide/Diamond Shock Studs 5.Threaded or Plain Carbide Nozzles for Flushing Above features are subject to changes and modifications according to customers' requirements. Packaging & Delivery Packaging Details: wooden case, also according to your request Delivery Detail:5-7Days
BIT SPECIFICATION Bit Type 12-1/4� GS1905 IADC Code S224 Blade 5 Cutter Size (mm) Φ19MM;Φ13MM Cutter Qty Φ19�36;Φ13�21 Nozzle Qty/Type 7NZ Gauge Length (mm) 65 Connection 6-5/8� API REG N.W./ G.W.(KG) 102/127 Nozzle Size (inch) 16/32;18/32 Packaging & Delivery Packaging Details: wooden case, also according to your request Delivery Detail:5-7Days GREAT PDC bit Advantage  Equipped for Performance Great PDC Bits are equipped with 1.High Abrasion tungsten carbide material, Hardened Alloy Steel base material 2.High performance PDC-Cutters 3.Carbide and Diamond gauge protection 4.Carbide/Diamond Shock Studs 5.Threaded or Plain Carbide Nozzles for Flushing Above features are subject to changes and modifications according to customers' requirements. Steel body Steel body fixed cutters are made from a high alloy steel. Advanced machining technology has improved the manufacturing precision remarkably. Great with advanced 5 axes and 3 axis digital mills
BIT SPECIFICATION Bit Type 7-1/2" GS1606T IADC Code S423 Blade 6 Cutter Size (mm) Φ16MM;Φ13MM Cutter Qty Φ16�33;Φ13�25 Nozzle Qty 6NZ Gauge Length (mm) 60 Connection 4-1/2" API REG N.W./G.W. (KG) 45/60 Nozzle Size(inch) 18/32
BIT SPECIFICATION Bit Type 4-5/8� GM1305 IADC Code M232 Blade 5 Cutter Size (mm) 13MM 10MM Cutter Qty 1317 103 Nozzle Qty/Type 5P Gauge Length (mm) 38 Connection 2-7/8� API REG N.W./ G.W.(KG) 13/15 Matrix body Matrix body fixed cutters are made from tungsten carbide material. This provides improved wear resistance and erosion.Additionally, they are typically more heavy set as far as cutter count.In applications of high fluid volume or high sand, matrix body bits offer longer life and multiple bit runs. Our Service: 1 24 hour uninterrupted serviece,answer your questions in a timely manner 2 Warm welcome guests to visit 3 One of the largest manufacturer and supplier in Asia.High technology,high quality 4 Flexible production 5 sincerely cooperate with you 6 Service to customer satisfaction
China Factory Supply Mining Drill Bits Rock Drilling Tricone Bits For Hard Rock Product Descriptions Tricone bit is an ideal solution for soft, medium, or hard rock formations, it is connected with the drill stem and rotates along with it, and drive cones to pressed on the rock. Each cone rotates round the axis of its leg and three cones simultaneously revolve around the bit center. The tungsten carbide inserts on the cone shell cause the formation to spall under the weight on bit and the impact load of cone rotating, the debris will be discharged out to hole by compression air. Tricone bits come in several different varieties, and can deal with a wide range of different rock formations. It is important to know the type of formation you are drilling in when selecting a drill bit. Application Fast delivery factory tricone drill bit for various mining stone,rock with high quality tungsten carbide insert Our drill bits are widely used in mining, oil, gas, water well drilling, HDD, quarrying and construction. Company Information Hunan TianYing Drilling Machine Manufacturing Co., Ltd. was founded in 1958, located at Zhuzhou, China, the word famous tungsten Carbide production base. We are a professional producer, and supplier of Rock Drilling Bits, all the bits crafted from the finest material available in today's market.TCI(Tungsten Carbide Insert) types are our main products, available in many sizes, designed for soft to very hard formations. With years of study and refining, our Rock Drilling Bits are preceded by extensive R&D, field tested, and backed by our unmatched commitment to service and support, our products exported to all over the world, such as Australia, North America, Middle East, North Africa and Southeast Asia etc. Today, Tianying's products have been favored and respected by domestic and foreign customers. We will continue to serve our customers with high quality products, excellent service and reasonable price. All of our bits are manufactured according to strict standards, set forth by the American Petroleum Institute (API). And classified according to characteristics set forth by the International Association of Drilling Contractors (IADC). Packaging & Shipping wooden case Contact Us Fast delivery factory tricone drill bit for various mining stone,rock with high quality tungsten carbide insert
Bit specification Bit type 8 1/2" gs1615tq Iadc code S323 Blade 5 Cutter size (mm) Φ16mmï¼?î¦13mm Cutter qty Φ16ã?25ï¼?î¦13ã?35 Nozzle qty 6nz Gauge length (mm) 55 Connection 4-1/2" api reg N.W./g.W. (kg) 46/61 Nozzle size(inch) 16/32;18/32 Our service: 1ã?�24 hour uninterrupted serviece, answer your questions in a timely manner 2ã?�warm welcome guests to visit 3ã?�one of the largest manufacturer and supplier in asia.High technology, high quality 4ã?�flexible production 5ã?�sincerely cooperate with you 6ã?�service to customer satisfaction -
Derun pdc bits are designed professionally for different formations to meet with various drilling applications. Rop and durability improvements are ensured by advanced cutting structure layouts, high performance pdc cutters and superior hydraulic design.
Derun pdc bits are designed professionally for different formations to meet with various drilling applications. Rop and durability improvements are ensured by advanced cutting structure layouts, high performance pdc cutters and superior hydraulic design.
Derun PDC bits are designed professionally for different formations to meet with various drilling applications. ROP and durability improvements are ensured by advanced cutting structure layouts, high performance PDC cutters and superior hydraulic design.
We specializes in drill bits, drill pipe, Mud pump and stabilizers for water well, oil field, construction, geothermal, directional boring, and underground foundation work all over the world. Our purpose is to sell the best quality products at the lowest possible price. We are professional supplier of new and used(rebuilt) drill bits used for oil filed, water well. Including tricone bits,PDC bits and drill pipe. Various of model and dimension available. Good condition and reasonable price. Product Description: Steel teeth Bits 114-117, 127 Soft Formation Tooth Bits The 114-117 bits are used to drill low-compressive strength, soft formation. Long projection tooth lengths are used on high offset cones to provide the greatest penetration rates possible. Wear-resistant hard facing is used to control tooth wear. On the softest bits type this hard facing completely covers the bit teeth. 127 Medium-Hard Formation Tooth Bits The 127 bits are used to drill high-compressive strength, medium hard formations. Short projection teeth with reduced crest length are used in this series of bit designs. Durable hard facing is applied to reduce tooth wear. Medium hard with high compressive strength and hard streak (hard shale ,sandstone , limestone, etc.) 437 Soft Formation TCI Tricone Bits The 437 TCI bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, result in high bit penetration rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations. 517 Medium Formation TCI Tricone Bits The 517 features aggressive chisel tungsten carbide insert on the heel rows and inter rows. This design provides a fast drilling rate and added cutting structure durability in medium-to-medium hard for-mationes. The HSN rubber O-ring provides adequate sealing for bearing durability. 637 Hard Formation TCI Tricone Bits The 637 bits can be used to drill hard and abrasive forma-tions. Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical-durability and long life. 617 Medium-Hard Formation TCI Tricone Bits The 617 feature robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fest drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-rin provides adequate sealing for bearing durability. Plywood case or according to the conform order.
1.PDC drill bit is super hard material combined with diamond and hard alloy under high temperature and high pressure. 2.It not only has the advantages of hard and durable from diamond, but also has the advantages of high impact resistance and big blade from hard alloy. 3.It greatly improves the drilling efficiency and is the ideal drill bit for the drill operation of medium & hard as well as super hard rock. The carrier of PDC bits is forged and pressed by first-class steel. 4. Its mechanical capacity is strengthened by fully automatic vacuum heat treatment equipment.
PDC drill bits are divided into two forms: core taking and non core taking. The production is divided into two forms: infiltrating and welding. Various forms can be customized according to customer requirements. PDC drill bits are used in medium soft formations and have advantages such as long service life and fast drilling speed.
Tci cone bit used in oil drilling, water well, coal field exploration and development of engineering applicationsï¼? apply to soft hard staggered formation, such as soft shale, clay, gypsum, limestone, gypsum, sandstone, conglomerate, dolomite, sandstone, etc .