Aluminum Extrusion 6063 Scrap Aluminum Extrusion 6063 Scrap. It is the most common alloy used for aluminum extrusions. Normally, Aluminium Extrusion 6063 Scrap shall consist of clean aluminum profile extrusions including window, shop fittings, irrigation tubes and door frames. However, it must be free of screws, iron components, plastics, rubber or other foreign materials. Chemical composition Silicon minimum 0.2%, maximum 0.6% by weight Iron no minimum, maximum 0.35% Copper no minimum, maximum 0.10% Manganese no minimum, maximum 0.10% Magnesium minimum 0.45%, maximum 0.95% Chromium no minimum, maximum 0.10% Zinc no minimum, maximum 0.10% Titanium no minimum, maximum 0.10% Other elements no more than 0.05% each, 0.15% total Aluminium ; Remainder
Item Value Place of Origin UK Brand Name Copper Wire Scrap Model Number CS11945 Type Copper Wire Copper Content 99% MOQ 100 Tons Appearance Red color Cu Content (%) 99.998% Purity High Purity
Specification for Aluminum Scrap 1. Scope This specification defines the quality and requirements for aluminum scrap intended for recycling and manufacturing. It ensures consistency, quality, and suitability for various applications. 2. Material Requirements 2.1. Composition Aluminum Content: Minimum 90% by weight. Contaminants: Maximum 2% by weight of non-aluminum metals (e.g., steel, copper). Maximum 1% by weight of non-metallic materials (e.g., plastic, rubber). Moisture content should not exceed 2% by weight. 2.2. Form and Condition Types: Can include profiles, sheets, turnings, wire, and castings. Size: Must be manageable for handling and processing, typically not exceeding 1 meter in any dimension. Cleanliness: Free from excessive oil, grease, and other foreign substances. 3. Packaging and Labeling Packaging: Scrap should be securely packaged or bundled to prevent scattering and contamination during transport. Packaging materials should not contaminate the scrap. Labeling: Each package should be clearly labeled with: Supplier name and address. Net weight. Scrap grade and type. 4. Inspection and Testing Visual Inspection: Performed to check for visible contaminants, appropriate size, and cleanliness. Chemical Analysis: Periodic testing to verify aluminum content and contaminant levels. Moisture Test: Conducted to ensure moisture content compliance. 5. Documentation Certificate of Analysis (CoA): Provided with each shipment, detailing the chemical composition and confirming compliance with this specification. Bill of Lading: Including details of the shipment, weight, and scrap grade. 6. Compliance and Rejection Compliance: All supplied scrap must meet the requirements outlined in this specification. Rejection: Material not meeting these requirements will be subject to rejection and return at the supplier's expense. 7. Safety and Handling Handling: Appropriate safety measures should be taken to prevent injury or contamination during handling and transportation. Personal Protective Equipment (PPE): Workers must use suitable PPE, including gloves and eye protection. 8. Environmental and Regulatory Considerations Compliance: Must comply with all relevant local, national, and international regulations regarding waste and recycling materials. Environmental Impact: Suppliers are encouraged to follow environmentally friendly practices in the collection and processing of aluminum scrap.
Talon
aluminium scrap is categorized as new scrap and old scrap New scrap arises during the manufacturing of aluminium semifabricated and final products Old scrap refers to those products collected after disposal by consumers It is the perfect product for many customers even for those with specific needs that do not need pure aluminium We supply from all over the globe and have relationships with recycling associations spread across various continents
Aluminum Scrap Aluminum Wire scrap Aluminum Scrap UBC Aluminum Wheel scrap Specifications: 1.Aluminu scrap 2.Reasonable price and high purity 3.Timely delivery and promptly shipping 4.Fire deals Specifications 1.Aluminum scrap 2.Reasonable price and high purity 3.Timely delivery and promptly shipping 4.Fire deals Aluminum scrap 6063 Aluminum profile scrap 6063 Aluminum content 75%, 95%,99.7% Aluminum content 75%, 95% 99.7% or can satisfy the demands of customer Application: Aluminum alloy production , Steelmaking and requirements of the coating is not high Fireworks production 1.mainly used for melting ingot 2.discontinuous melting with scrap 3.easy control and operation 4.fast melting 5.energy saving This Scrap Aluminium is produced in the production of industrial waste.Such as:Scrap Aluminium Wire,Scrap Aluminium block and so on Contact Us With Your Email For More Details
Hot selling high quality 99.9% aluminium Scrap Aluminium Wire Scrap Item Quality standard Si 0.2-0.6% Fe 0.35% Cu 0.1% Mn 0.1% Mg 0.45-0.9% Cr 0.1% Zn 0.1% Applications 1. Mainly used for melting ingot 2. Discontinuous melting with scrap 3. Easy control and operation 4. Fast melting 5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on 6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.
Silvery white light metal. It's malleable. Commodities are often made in rod, sheet, foil, powder, ribbon and filament. An oxide film can be formed in moist air to prevent metal corrosion. The aluminum powder and aluminum foil heat up in the air and burn violently, and emit a blinding white flame. Soluble in dilute sulfuric acid, nitric acid, hydrochloric acid, sodium hydroxide and potassium hydroxide solutions, insoluble in water. The relative density is 2.70. Melting point is 660 â??. The boiling point of 2327 â??. Aluminum is the most abundant metal element in the earth's crust, ranking third only to oxygen and silicon. The development of three important industries, aviation, construction and automobile, requires that the material characteristics have the unique properties of aluminum and its alloy, which greatly benefits the production and application of this new metal aluminum. It is widely used.
Aluminum Specification: Aluminum is a lightweight, silvery-white, and ductile metal known for its high corrosion resistance, excellent thermal and electrical conductivity, and versatility in various applications. It is commonly used in industries such as aerospace, construction, automotive, and packaging. Physical Properties: Density: Approximately 2.70 g/cm�³ Melting Point: 660.3�°C (1220.5�°F) Boiling Point: 2519�°C (4566�°F) Mechanical Properties: Tensile Strength: Varies with alloy, typically ranging from 70 to 700 MPa Yield Strength: Varies with alloy, typically ranging from 30 to 500 MPa Elongation at Break: Varies with alloy, typically from 1% to 30% Hardness: Varies with alloy, typically from 20 to 120 HB Chemical Composition: Pure aluminum is composed of 99.0% to 99.9% aluminum. Common alloying elements include copper, manganese, silicon, magnesium, and zinc. Thermal Properties: Thermal Conductivity: 205 W/m�·K (at 20�°C) Coefficient of Thermal Expansion: 23.1 x 10â?»â?¶ /K Electrical Properties: Electrical Conductivity: 37.7 x 10â?¶ S/m (at 20�°C) Corrosion Resistance: Excellent resistance to atmospheric corrosion due to the formation of a protective oxide layer. Good resistance to corrosion in marine environments and many industrial chemicals. Formability and Machinability: Highly ductile and can be easily formed into various shapes through processes like rolling, extruding, and drawing. Machinability varies with the alloy, with some aluminum alloys offering better machinability than others. Common Applications: Aerospace: Airplane fuselages, wings, and other structural components. Automotive: Engine components, wheels, and body panels. Construction: Window frames, roofing, and structural components. Packaging: Beverage cans, foil, and containers. Electrical: Conductors, wiring, and electronic components. Surface Treatment: Aluminum can be anodized, painted, or coated to enhance its surface properties and appearance. Recyclability: Aluminum is highly recyclable and retains its properties after recycling, making it a sustainable material choice. Standards and Grades: Common standards include ASTM B209 for aluminum sheet and plate, ASTM B221 for aluminum extruded bars, rods, wire, profiles, and tubes. Grades and tempers vary depending on the specific application and alloy composition.
GerardJOSEPH llc is an American company specializing in international supply of Consumers goods. We are a family business that is delivering the highest quality of consumer goods to buyers all over the world. We own shares of companies through the USA that do the production for us. High quality of products are guaranteed thanks to careful, detailed and research. Thanks to the policy followed by the company, we are conceived in the market as a reliable, honest and business like partner, the one that guarantees the highest standard of products. Type:Aluminum Can Al Content (%):99%-99.97% Material:99.7% Aluminium Scrap Product Name:High Purity ring-pull can Application:Recycling Material Packaging:Compressed USA scrap metals
Wheel Alloy Scrap Reuse Car Aluminium Wheel Alloy Scrap 99.90% Density: 2.702g/cm³ Melting point: 660.37 Boiling point: 2467.0 Color: silver white
We have established immense expertise in dispatching Aluminum Extrusions. We have Aluminum Extrusion 6063 that is without any attachments.
a. Name of product: NON FERROUS SCRAP ALUMINUM b. Price of product: USD$2400~2600/MT c. Product origin: TAIWAN d. Key Specifications/Special Features: 6061 / 6063 e. Harmonization System (HS) Code :76020010 f. Minimum Order Size : 20MT g. Packaging details: EXPORTING BALE h. Monthly supply: 1000MT
Dear All, We can supply Aluminium profiles regrind. Interested parties contact us for a detailed price offer.
Aluminium Tread
Aluminium Troma
Aluminium Terse
Tassel
Specifications 1.Aluminu scrap 2.Reasonable price and high purity 3.Timely delivery and promptly shipping 4.Fire deals Aluminum scrap 6063 Aluminum profile scrap 6063 Aluminum content 75%, 95%,99.7% Aluminum content 75%, 95% 99.7% or can satisfy the demands of customer We offer 100% pure and well-packed Industrial Scrap. We are an eminent Supplier and Exporter of the Industrial Scrap. Our remarkable range of Industrial Scrap is inclusive of Metal Scrap and Paper Scrap. All our Industrial Scraps are being procured from the trusted vendors of the market. Our Industrial Scraps are tested on various parameters before the final delivery. Moreover, we hold specialization in smooth handling of the bulk orders of Industrial Scrap that too within fixed timeframe Application: Aluminum alloy production 1.mainly used for melting ingot 2.discontinuous melting with scrap 3.easy control and operation 4.fast melting
Taste - Talon
