Complete Automatic Aluminium Foil Container Making Machine  Model: SEAC-80/110AS (Four Cavities or Five Cavities Capacity !) Units: Automatic Feeder+Automatic 80Ton H Type Press+Cavities Mould+Auto Stacker+Scrap Sucker & Auto Presser.    It fit for all common size Aluminum Foil Container production requested. The Big capacity could to cover big range of size products. Lower power requested than other old model machines.  Specification:  1.Raw material: Aluminum foil; Thickness: 0.030mm ~0.280mm;    Alloy: 8011,8006,3003,3005; Temper O to H24;  2.Good Japan's Inverter, PLC and 10inch Touch Screen control system;  3.Max. width of Aluminum foil: 1200mm;  4.Max. diameter of Aluminum foil: 800mm;  5.Core diameter of Aluminum foil: 76mm(152mm as Optional );  6.Working speed: 40-68 times/min;  7.Total Power: 14kw+2kw+2.5kw+3kw;  8.Compressed air needed: 0.5- 0.8 Mpa, 0.4m3/min;  9.Install dimension: 6400*2600*3600mm;
We CHOCTAEK machine and mould have been deliveried to 35 countries, such as Italy, UK, India,Spain, Macedonia, Brazil, Colombia, USA, Australia, Algeria, South Africa, Korea, and so on. Till 2019, we designed 4 kinds of aluminum foil production lines:45T,60T,C1000,C1300; developed and produced 1580 sets aluminum foil container moulds which are in different sizes and shapes since 2003. More advantages: 1. The tension of expansion shaft is controlled by ultrasonic, which can detect diameter of alu. foil roll and adjust the brake tension automatically. 2. The operating control panel is equipped with a large touch screen(SIEMENS) allowing quick set up of machine parameter and visualization of production flow. 3. The key electrical appliance adopt great elements in famous brand, such as SCHNEIDER, SAMCOfrom Japan etc. 4. A huge movable bed plate on Aluminium foil container making machine is equipped in this strong aluminium foil press, so it is easy and convenient to load the mould. 5. High precision sensors (SICK) are installed with this Aluminium foil container making machinery to ensure high sensibility and precision. 6. The press can be equipped with moulds for both wrinkle wall and smooth wall container production.
The C1300 press has been designed and developed exclusively for the production of aluminum food containers, dishes and trays. These products are obtained by blanking and forming of aluminum which has been unwound from a coil. The C1300 press is a â??Hâ??-frame press with 80-ton capacity. The large working bedplate of the press is equipped with two removable supports with adjustable height to facilitate changing the tools while protecting the surfaces of the press. This permits the press to use standard tools as well as tools designed with air cylinders below the bottom plate. The press uses one brushless motors to feed the aluminum strip allowing accurate control of step and speed. The height of the feeding system is manually adjustable to match the strip height of the tool currently in use on the press. There are electronic cams (solenoid valves) controlled by a PLC and fixed air connections with pressure regulators, providing easy tool set-up. The C1300 press is equipped with two compressed air tanks. The pneumatic control panel is easily accessible during operation of the press. The press may be equipped with tools for wrinkled-wall and smooth-wall, container production. If you are intrested in our aluminum foil container making machine and mould, please contact with us.
The production line of food container of aluminium modle:ctjf-40t The productivity is 40-70 per munite, that is, this production line can produce 40-70 products per minute.(it depends on the productions complexity and size.) the fastest speed is 70 products per minute.Every mould has one cavity.If the product is small, a mould has two or more cavities. This prodution line is composed of the followings(note1), 1. An auto-lubricated feeder(note2) 2. An eletronically controlled panel 3. A length controller 4. A 40t pneumatic punch 5. A set mould of food container which is vertical curl or full curl. 6. A automatic conveyor(with a carbore which can be filled the resting foil) 7. A collector of finished product 8. A machine which assist to change die 9. A machine which assist to change foil Note: 1.This production line is electrification integration, and centralized control.It is totally controlled automatically.Worker just collect the finished products. 2.The width of foil feed system is 520mm.(basic model) 3.The lenth of feeding foil is controlled by computer. You can regulate the length form 30mm to 999mm. 4.As we can manufacture the machine according to the productsí»s size as they required, the outer-appearance of the machine is a little bit different. The procedure of production line: Raw material:aluminium foil-->auto-lubricated feeder-->pinch head controller-->40-t precise presser--> mould-->collect product by hand (or auto-collector)-->packing
Since 2003, CHOCTAEK has been specialized in producing aluminum foil container mould, aluminum foil container production lines and other relatives machines. We are keep researching and developing machines and moulds to fulfill the integration and full-automation of aluminum foil container production. Till to May 2019, we have developed and produced 1580 aluminum foil container moulds which are in different sizes and shapes. We have exported machines and moulds to more than 35 countries and offer service to 90 companies. We continuously offer technical support and consulting service to new customers. CHOCTAEK always pay attention on your requirement and concern your companys development. We make every effort to improve our technology &quality, to ensure to offer you machine and mould in best quality and technical service. We requite your expectation and support in the way of upgrading technology continuously. CHOCTAEK will satisfy your specific demand.
1. Usage:hydrophilic aluminum foil to be used for air conditioner , condenser and cooling heat exchanger. 2.Specification: Alloy:8011, 1100, 3102, 1030b Temper: h18, h22, h24, h26 Thickness:0.095mm, 0.105mm Width:300-1250mm Inner diameter: 150mm Core:steel , aluminum or paper core Surface: mill finish with hydrophilic coating Packing: export standard, wooden pallet or wooden case Payment terms: 30%t/t deposit balance by copy of b/l Delivery time: 30-45 days Origin: china Main markets:north america , south america , eastern europe , southeast asia , africa , oceania , mid east , eastern asia , western europe. 3. Coating structure:as follows. Hydrophilic layer Anti-corrosive layer Aluminium foil Anti-corrosive layer Hydrophillc layer 4.Merits: high corrosion resistance, no white powder, no pollution, without water bridge, high heat exchange effciency, reducing windage and reducing the noise, conserving energy and anti-mildew agent and no off-flavor and so on. Export standard package.
top out: 447 324 mm top in: 411 288 mm base: 371 248 mm height: 65 mm Raw Material: 3003,3004,8011,8006 Shape: Oval tray Package: 100 pcs per carton. Usage: Food storage Temper: H22, H24, O. Weight: as per customer sample Thickness: as per customer sample Logo: as per customer sample MOQ: 40HQ We are specialized in making aluminum foil container machines and aluminum foil food container. Because we make machines, the cost of our food container is relatively low, the price of the food container is lower, and the quality of the lunch box is also better. Apply to: Baking, airline catering, takeout distribution, picnic,cooked food, pastry,fast food,barbecue,cake,moon cake and other food industry packing and family party.
We deals in the following products of India, China, Taiwan and Korea Origin:- Aluminium Foil
top out: 429 319 mm top in: 402 292 mm base: 353 240 mm height: 74 mm Raw Material: 3003,3004,8011,8006 Shape: rectangular Package: 100 pcs per carton. Usage: Food storage Temper: H22, H24, O. Weight: as per customer sample Thickness: as per customer sample Logo: as per customer sample MOQ: 40 HQ We are specialized in making aluminum foil container machines and aluminum foil food container. Because we make machines, the cost of our food container is relatively low, the price of the food container is lower, and the quality of the lunch box is also better.
Aluminium Foil products is still needed throughout the world, it can have significant impact on price increases. We provide this Aluminium Foil on an ongoing basis and can serve exports to your country. With quality packaging and production processes, making the products we sell have selling points that are not only economical but also safe. With our full support we help you become an importer of the products we sell. We, Nif International, hope to be the best export-import partner for you around the world.
Tape Width >100 mm Tape Length >50 m Color Silver Use Bag Sealing Adhesive Acrylic Material Aluminium Foil Aluminum Foil Tapes are coated with acrylic or rubber adhesive and available with or without release paper. This foil tapes are available with 25 mic-100 mic thickness. Features: Shiny silver, U.V. resistance Flame, moisture and many chemical barrier Good for harsh Long term outdoor application It has hot & cold insulation property Usage: Widely used in tubes and lead jointing for air conditioner, refrigerator and water heaters. For wrapping on pipes, engines and wires as a heat & water resistance. Used as a static ground application.
Aluminum foil food containers.
Aluminium Foil Container, Aluminium Foil..
Aluminium foil container.
Aluminium Foil Container..
Aluminium Foil Container..
