High alumina description generally means content of alumina percentage is higher than 45. Alumina is one of the most chemically stable oxides, and it offers excellent hardness, strength and spalling resistance. Alumina refractories are suitable for lining furnace operating up to 1850C. Alumina refractories have the advantages of a high resistance in oxidizing and reducing atmosphere and is extensively used in heat processing industries.
Refractory Brick's Standard size ( 230x115x75 mm ) But we make all sizes of bricks as per Requirement. Alumina ( AlO) - 70 % The weight of bricks is 5.2 KG Bulk density (B.D) - 2.6 Apparent porosity % Max - 22 Ferric ( FeO) % Max - 2.5 Cold Crushing Strength - 500 kg/cm RUL Temperature % MAX - 1480 PLC Temperature % MAX - 1500
Alumina Bricks Grog (stock lot of assorted and mixed, various sizes and shapes) with the second product meet demand.
Product Introduction: High alumina brick refers to refractory products with Al2O3 content higher than 48%.It is made of bauxite or other raw materials of high alumina content .The refractoriness of high alumina brick can be more than 1770 C . According to the content of Al2O3, high alumina bricks are usually divided into three grades: Grade I Al2O3 content 75%; Grade II Al2O3 content is 60 75%; Grade III Al2O3 content is 48~60%. Application: High alumina bricks are mainly used for lining blast furnaces, hot blast furnace, electric furnace roofs, blast furnaces,reverberatory furnaces, and rotary kilns. Features: 1.Low creep. 2.Good slag resistance. 3.Strong thermal shock stability. 4.Good erosion resistance.
Mono Aluminium Dihydrogen Phosphate(MAPP) : 1.Properties: Aluminium dihydrogen phosphate is a type of colorless and odorless but extremely sticky liquid, freely soluble in water and solidifiable at normal room temperature.It has strong binding force in liquid or solid states and good resistance to peeling, high temperature, vibration and hi-temp air stream in addition to good infrared absorbability and insulativity. 2. Product application It is mainly used as binder and curing agent in the production of hi-temp refractory materials for kiln, spray paint, Fire clay, casting and foundry industry. It is a type of colorless and odorless but extremely sticky liquid, freely soluble in water and solidifiable at normal room temperature 3.Aluminium dihydrogen phosphate chemical examination report Item Standard Appearance Colorless Liquid White Powder P2O5 % 33±1 66±2 Al2O3 8±0.5 16±1 Iron oxide (Fe2O3)% 0.02 0.02 pH value 1.4~2.6 1.4~2.6
High Alumina Brick, RefractoryHigh Alumina Brick, High Alumina Fire Brick for Blast Furnace Low creep high alumina brick for blast furnace is made of corundum, mullite "sillimanite, andalusite and kyanite" and high quality bauxite clinker as raw material by shaping at high pressure and sintering at high temperature. Characteristic: 1.The content of AL2O3 is 48%. 2.High refractoriness. The temperature is up to 1750~1790�ºC, it belongs to High-duty Refractory. 3.High refractoriness under load. The URL is higher than fireclay brick as the high content of Al2O3, however, it is lower than silica brick because of mullite crystal does not form reticular tissue. 4.Excellent slag resistance. High alumina brick is a kind of neutral refractory material so it enjoys excellent resistance to acid slag and alkali slag corrosion. Application: The main markets for low creep high alumina brick are building lining of hot-blast stove, blast furnace, coke oven, rotary kilns of cement and so on. High Alumina Brickis made fromhigh grade bauxite,it has the advantage of high refractoriness under load,long service time,good thermalinsulation performance andso on
Cement kiln high alumina bricks have great features of good thermal shock resistance, high strength, good resistance to chemical corrosion, low thermal expansion, low thermal conductivity, low firing temperature, the material properties are improved greatly, and energy consumption is also significantly reduced. As frequently used cement kiln refractories, high alumina bricks are mainly used in precalciner, grate cooler, and these parts of cement rotary kiln, such as outlet zone, inlet zone, transition zone, calcining zone and preheating zone. For more information, please enter the URL:
High Alumina Bricks Are Mostly Useful Where The Temperature Is Too High Than A Normal One. As It Is Useful At Very High Heat, It Should Be Of Excellent Quality Like We Are Providing. Not Only In India But We Are Also Contributing Our Services To Across The World. Items Like Metal And Glass Are Heated Up To Very High Heat So That It Can Melt Down And Can Use For Different Purposes. For Such A High Temperature, A Product Should Be Able To Tolerate High Heat And Should Have Highly Resistant To Corrosion. If You Are In Search Of Any Kind Of Such A Product Than We Can Be A Very Much Useful Source For You Because We Are Manufacturing And Exporting Good Quality Of Alumina Bricks To Across The World.
Janta Group is one of the largest manufacturer of Refractory Bricks which are widely used in various industries for various purposes. We have a three production unit with large production capacity for manufacturing High Alumina Bricks (Refractory Bricks). We are manufacturing 25% Alumina to 85% Alumina Bricks. Our range includes standard size and special size of Bricks, Burner Blocks, Tiles, Slabs, Blocks, or customer's required size. Our Refractory Bricks are manufactured from high-grade raw materials, which are procured from trusted and reliable vendors across the world. Our clients can avail this comprehensive variety of Refractory Fire Bricks at market leading prices. Our Refractory bricks are widely used in the construction of furnaces, kilns, fireplaces and fireboxes which can withstand high temperatures and are suitable for fireplaces in the industries and other commercial building.
Active Refractories is a grand name in the field that engages in offering Fire Clay and High Alumina Bricks that are manufactured using optimum quality raw materials. Appreciated and accepted for their longer life, high resistance to temperature and supreme finishing, these bricks are vastly sought after. These strong bricks are provided in standardized packaging. Available Size. (In Inch) 9X4.5X3, 9X6X3, 12X6X3 ( Side arch/ End arch)
Product Description: We are a trusted name in manufacturing fire bricks which are a block of ceramic material used in masonry construction. These are sized to be layered with one hand using mortar. Our fire bricks are made from fire clay which is widely used as refractory insulating bricks to maintain insistent temperature. Thee bricks are extensively used in lining furnaces, kilns, fireboxes, and fireplaces.
High alumina firebricks are classified according to the alumina content which is from lowest 48% to highest 95%, manufactured from mineral of bauxite, corundum, etc. By mixing, press-forming, drying, sintering and machining. High alumina bricks feature stable mechanical strength and thermal shock resistance, with high refractoriness of no lower than 1880¡æ, high alumina bricks are commonly used as refractory lining exposed to heat directly or backup insulation linings in various types of industrial kiln or laboratory furnace. Wooden pallets
Product: 92% alumina lining brick Specification: 40mm, 60 mm, 70mm highness Bulk density: 3.6 g/cm3 Wear rate: 0.12 Hardness:8-9 mohs Compression strength:2000 Water absorption:0.01 Color: white 150*50*40mm 150*50*60mm 150*50*70mm
It is produced by foam coagulation technique. Features: 1. It has advantages with small bulk density, high cold crushing strength, and high refractoriness under load, small dimension tolerance and good thermal shock resistance. 2. It has the lowest and most stable thermal conductivity in various insulating refractory bricks. 3. It can reduce the total weight of furnace body and the thickness of furnace wall effectively, improve heat efficiency, lower energy consumption, improve work conditions and production efficiency, and considerable economic benefit can be obtained. Application: It is not only widely used in insulating layers of various of thermal processing equipments, such as hot blast furnace, coke oven, glass kiln, etc, but also apply to linings in parts of furnace without strong high-temperature molten material erosive. Item High Alumina Insulating LG-1.0 LG-0.9 LG-0.8 LG-0.7 LG-0.6 LG-0.5 LG-0.4 Al2O3 % 48 Fe2O3 % 2.0 Bulk Density g/cm3 1.0 0.9 0.8 0.7 0.6 0.5 0.4 Cold Crushing Strength Mpa 3.92 3.43 2.94 2.45 1.96 1.47 0.78 Thermal Conductivity Coefficient w/m.k 0.45 0.45 0.35 0.35 0.3 0.25 0.20 Test Temperature of Permanent Linear Change Rate 2% C 1400 1400 1400 1350 1350 1250 1250
1.Description High alumina fire brick contain al2o3 more than 48%, which is made of high grade bauxite through high temperature calcinations. Its refractories is usually above 1770 ¡ãc. The main mineral components are corundum and mullite phases. It is a kind of neutral refractory material so that it enjoys excellent resistance to acid and alkali corrosion. According to al2o3 content, it can be divided into three degrees:the al2o3 content is more than 75%.The al2o3 content range from 60% to 75%.The al2o3 content range from 48% to 60%. 2.Feature 1. High-temperature endurable . 2.Good thermal shock resistance. 3.High cold crushing strength 4.Good resistance to abrasion and corrosion. 5.Good thermal spalling resistance. 6.High mechanical strength. 7.Good volume stability at high temperature. 3.Applications High alumina fire brick is used for building blast furnaces, hot blast stove, electric stove roof, ladle, blast furnace and reverberatory furnace, lining of rotary kiln and glass kiln and chemical industrial kiln. In addition, high alumina brick is widely used as regenerative checker brick of open hearth, pouring system with the plug head, nozzle brick, etc. On wooden pallets with plastic cover Pallite size:1.05*1.05m
An anchor brick for an industrial furnace top, comprising a cylinder consisting of a hanging end and an anchor, a spaced-apart groove formed on the surface of the anchor, and a rib in the longitudinal direction on at least one surface of the anchor , after the installation of ribs, due to the reinforcement and pulling effect of the bar, the tensile strength of the anchor is significantly improved, the stress generated at the groove in the ribs can not continue to pass the barrier, so the structure of the anchor brick is not easy fracture occurs.
High Alumina Bricks are produced with select bauxite chamotte as main raw material, fired at 1450-1470 �°C by advanced process with strict quality control. High Alumina bricks have great features like high temperature performance, great corrosion and wear resistance, high bulk density, low iron content, etc. High Alumina bricks are extensively used in mining, metallurgy, cement, and chemical, refinery and refractory industries. These bricks are used in all kinds of industrial furnaces and high temperature areas to prolong the lives of furnaces. High alumina bricks have high refractoriness, good acid and alkali erosion resistance, high temperature strength, thermal shock stability is good wait for an advantage, widely used in metallurgy, petroleum, chemical industry, building materials, thermal technology equipment mechanical processing, military industry and other industries.
Shape Rectangular Material Refractory materials For Use in Floor Size (Inches) 9 In. X 4 In. X 3 In. Resistance Durability Fire Resistant
The refractory basic alumina silicon insulation brick is applying for thermal kiln or furnace of copper smelting, clinker / cement sintering, lime sintering production line. Basic brick is using at sintering zone. Alumina silicon brick is using at non-sintering zone. Insulation brick is using at insulation layer of equipment or giant pipes.
Fused Spinel, AluminaMagnesia Spinel is ahighly recommended refractory raw material. Using our high-quality prereacted ALUMINAMAGNESIA SPINEL for developing high purity refractories in both monolithic and brick form. Our high quality Fused Spinel has high bulk density and great color. It has strong resistance to corroding and antidetonation. It adopts high pure MgO and Chemical Al2O3 to smelt by EAF. Application include but not limited to the proof of EAF, basic oxygen furnace, steel ladle, intermediate zone cement rotary kiln, etc. Characteristics: good temperature vibration, good strength and volume stablity in high temperature. Applications: They have been widely used in cement,glass,steel making and non-ferrous metal industries. MagnesiaSpinel Brickis widely usedfor glassfurnace,cement kiln,blast furnace,steel and non-ferrousmetal industry
