HEUBACH INTERNATIONAL is a known supplying, manufacturing, trading and exporting unit of Alloy Steel F9 Pipe Flanges, which can be successfully hot formed using forces similar to those required by austenitic stainless steels. Indeed, many of the reactions of Alloy Steel F9 Slip On Flanges interfere with one another, requiring the use of process models to help in analysing options, optimizing competing reactions, and designing efficient commercial practices. Alloy Steel F9 Threaded Flanges is 100 % recyclable, where over 50 % of new steel is made from re â?? melted scrap metal, rendering it an eco-friendly material. Alloy Steel F9 Pipe Flanges Specifications Specifications : ASTM A182 / ASME SA182 Size : 1/2â?³ (15 NB) to 48â?³ (1200NB) Standards : ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. Class / Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc. Alloy Steel F9 Slip On Flanges Alloy Steel F9 Weld Neck Flanges Alloy Steel F9 Blind Flanges Alloy Steel F9 Orifice Flanges Alloy Steel F9 Socket weld Flanges Alloy Steel F9 Threaded Flanges Alloy Steel F9 Long weld Neck Flanges Alloy Steel F9 RTJ Flanges Alloy Steel F9 Reducing Flanges Alloy Steel F9 Forged Flanges Alloy Steel F9 Pipe Flanges Chemical Composition Grade C Mn Si P S Cr Mo Alloy Steel F9 0.15 max 0.3-0.6 0.5-1.0 0.03 0.03 8-10 0.9-1.1 Alloy Steel F9 Plate Flanges Mechanical Properties Tensile Strength Yield Strength (0.2%Offset) Elongation 380 585 20 %
HEUBACH INTERNATIONAL is a known trading, exporting, supplying and manufacturing unit of Alloy Steel F91 Pipe Flanges, which is easy to clean and does not tend to pick up odours. Therefore, Alloy Steel F91 Slip On Flanges is approved for use in acid production and concentration, along with the transport of such substances. Most steels like Alloy Steel F91 Threaded Flanges are first melted in electric â?? arc or basic oxygen furnaces and subsequently refined in another steelmaking vessel, mainly to lower the carbon content. In the argon â?? oxygen decarburization process, a mixture of oxygen and argon gas is injected into the liquid alloy of Alloy Steel F91 Weld Neck Flanges. Alloy Steel F91 Pipe Flanges Specifications Specifications : ASTM A182 / ASME SA182 Size : 1/2â?³ (15 NB) to 48â?³ (1200NB) Standards : ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. Class / Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc. Alloy Steel F91 Slip On Flanges Alloy Steel F91 Weld Neck Flanges Alloy Steel F91 Blind Flanges Alloy Steel F91 Orifice Flanges Alloy Steel F91 Socket weld Flanges Alloy Steel F91 Threaded Flanges Alloy Steel F91 Long weld Neck Flanges Alloy Steel F91 RTJ Flanges Alloy Steel F91 Reducing Flanges Alloy Steel F91 Forged Flanges Alloy Steel F91 Pipe Flanges Chemical Composition Grade C Mn Si P S Cr Mo Alloy Steel F91 0.15 max 0.3-0.6 0.5-1.0 0.03 0.03 8-10 0.9-1.1 Alloy Steel F91 Plate Flanges Mechanical Properties Tensile Strength Yield Strength (0.2%Offset) Elongation 380 585 20 %
Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
HEUBACH INTERNATIONAL is a known manufacturing, supplying, trading and exporting unit of Alloy Steel F5 Pipe Flanges, which may also be utilized at increased temperatures. The energy consumption based on the production of these Alloy Steel F5 Slip On Flanges has decreased recently due to technological improvements and energy conservation measures. This also influences its use in commercial kitchens and food processing plants, as our Alloy Steel F5 Threaded Flanges can be steam â?? cleaned and sterilized and does not need paint or other surface finishes. These Alloy Steel F5 Weld Neck Flanges is often applied in areas of higher temperatures than stainless steel can endure, and its low carbon allows it to be resistant against carbon precipitation. However, like many other steels, our Alloy Steel F5 Blind Flanges is susceptible to warm chlorine environments and can potential pit and crack Alloy Steel F5 Pipe Flanges Specifications Specifications : ASTM A182 / ASME SA182 Size : 1/2â?³ (15 NB) to 48â?³ (1200NB) Standards : ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. Class / Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc. Alloy Steel F5 Slip On Flanges Alloy Steel F5 Weld Neck Flanges Alloy Steel F5 Blind Flanges Alloy Steel F5 Orifice Flanges Alloy Steel F5 Socket weld Flanges Alloy Steel F5 Threaded Flanges Alloy Steel F5 Long weld Neck Flanges Alloy Steel F5 RTJ Flanges Alloy Steel F5 Reducing Flanges Alloy Steel F5 Forged Flanges Alloy Steel F5 Pipe Flanges Chemical Composition Grade C Mn Si P S Cr Mo Alloy Steel F5 0.15 max 0.3-0.6 0.5-1.0 0.03 0.03 4-6 0.44-0.65 Alloy Steel F5 Plate Flanges Mechanical Properties Tensile Strength Yield Strength (0.2%Offset) Elongation 275 485 20 %
HEUBACH INTERNATIONAL is a known trading, supplying, exporting and manufacturing unit of Alloy Steel F22 Pipe Flanges, where there is certainly minimal use with hydrochloric acids. Alloy Steel F22 Slip On Flanges performs much better than other austenitic stainless steel steels because of the much higher alloying of nickel as well as molybdenum. Thus, cheaper raw materials in Alloy Steel F22 Threaded Flanges, percent of chromium and up to 1.2 percent carbon with nickel sometimes added. Alloy Steel F22 Socket Weld Flanges are hardenable by heat treatment, have modest corrosion resistance, and are employed in cutlery, surgical instruments, wrenches, and turbines. Alloy Steel F22 Blind Flanges is an alloy that displays high resistance to corrosion, particularly against acidic environments. Additions of copper and carbon give Alloy Steel F22 Lap Joint Flanges distinct characteristics, with the copper serving as a strengthening agent against corrosive acids. Alloy Steel F22 Pipe Flanges Specifications Specifications : ASTM A182 / ASME SA182 Size : 1/2â?³ (15 NB) to 48â?³ (1200NB) Standards : ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. Class / Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc. Alloy Steel F22 Slip On Flanges Alloy Steel F22 Weld Neck Flanges Alloy Steel F22 Blind Flanges Alloy Steel F22 Orifice Flanges Alloy Steel F22 Socket weld Flanges Alloy Steel F22 Threaded Flanges Alloy Steel F22 Long weld Neck Flanges Alloy Steel F22 RTJ Flanges Alloy Steel F22 Reducing Flanges Alloy Steel F22 Forged Flanges Alloy Steel F22 Pipe Flanges Chemical Composition Grade C Mn Si P S Cr Mo Alloy Steel F22 0.50.15 max 0.3-0.6 0.5 0.03 0.03 4-6 0.44-0.65 Alloy Steel F22 Plate Flanges Mechanical Properties Tensile Strength Yield Strength (0.2%Offset) Elongation 205 415 20 %
Nickel Alloy Reducing Flanges
Nickel Alloy Blind Flanges
Alloy 20 Orifice Flanges
Alloy 20 Reducing Flanges
Alloy 20 Blind Flanges
We supply balustrade and its related components like connectors, saddles, pipes end caps in SS201, SS304, SS316, SS316L. Pipes OD42.2mm*2mm. Also available other OD on request. Balustrade shape round, square any other custom designed shape. Height about 1060mm. Finish: satin, Glossy.
Product Description: We supply connector in SS201, SS304, SS316, SS316L suitable for pipes OD42.2mm*2mm. Also available other OD on requist. Connectors in round, square any other custom designed shape. Finish: satin, Glossy.
Steel
specifications. The flange is slipped over the pipe and then welded both inside and outside to provide sufficient Strength and prevent leakage. This flange is used in preference to weld necks by many users because of its lower cost and the fact that less accuracy is required when cutting pipe to length. SLIP-ON FLANGE, SO FORGED FLANGES PRODUCTION RANGE Size: 1/2? (15 NB) to 48? (1200NB) Standards: ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings Pressure Ratings: Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 | PN6, PN10, PN16, PN25, PN40, PN64 etc. Carbon Steel Slip-on Flanges: ASTM A105/A105N, A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2, A694 F42, F46, F48, F50, F52, F56, F60, F65, F70, A516.60, 65, 70 (Spectacle Blind Flange, Spacer Ring/Spade Flange), Steel RST37.2, C22.8 Stainless Steel Slip-on Flanges: ASTM A182 F202, F304/304L/304H, F316/316L, F316H, F316TI, F310, F321, F904L Alloy Steel Slip-on Flanges: ASTM A182 F1, F5, F9, F11, F22, F91 Special Alloy Slip-on Flanges: Duplex, Super Duplex, Nickel Alloys Flange Face Type: Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ) Coating/Surface Treatment: Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized Value Added Services: CNC Machining, Customised Flanges Sizes for Slip On Flanges All Slip On Flanges are available available in sizes from 1/4” through to any size. Wall Thickness for Slip On Flanges Schedule 5s through to Schedule XXS and heavier. Dimensions Diameter : 1/2? to 24? Pressure class : 150#, 300#, 600#, 1500# Dimensions and Pressure Ratings for Slip On Flanges: ANSI, MSS- SP-44, BS3293, API 605 150lb through to 2500lb Flange Facings: Raised Face, Ring Type Joint, Large Tongue & Groove, Small Tongue & Groove BS4504, PN6, 10, 16, 25, 64 BS10, Table D, E, F, & H DIN Standards
Special Use: Cold Heading Steel Wire Gauge: 1.8mm-5.5mm Application: Construction Alloy Or Not: Is Alloy Type: Galvanized Place of Origin: India and China
Nickel Alloy Weld Neck Flanges
Nickel Alloy Socket Weld Flanges
Alloy 20 Weld Neck Flanges
Alloy 20 Socket Weld Flanges
Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,.Buying office, oem, components sourcing, value added services
