Paper liquid dyestuffs is used for dyeing sized and unsized wood-free papers and industrial grades. It is a cost effective solution for packaging applications and is suitable for liner board production where a higher light fastness is needed.
PolyDADMAC/Poly(dimethyl diallyl ammonium chloride, It can be used alone or in combination with inorganic coagulants, such as Poly Aluminum Chloride. Can be used to treat color wastewater from textile, dyestuff, and paper industry. Used as retention agent in the paper & pulp processing
AKD WAX 1840/1865 CAS No:144245-85-2 Product name: Alkyl Ketene Dimer (AKD WAX)1840/1865 Synonyms: Alkyl Ketene Dimer Wax, AKD, AKD WAX Descriptions: AKD WAX is pale yellow waxy flake solid, it is widely used in the paper industry as sizing agent. After sizing with AKD emulsion, it can make paper less water absorbing and controls its printing properties.
Paper chemicals(akd wax, akd emulsion, dsa, wsa), water treatment chemicals.
Mthpa, mhhpa, hhpa, akd wax, methyl tin stabilizer.
Specification: Appearance: Transparent oily liquid Color: Pt-Co: 25 max. Viscosity, pa.s (25 DEG C): 0.020-0.080 Density, g/cm3 (20 DEG C): 1.170-1.190 Tin Content, %: 19.0 min. Sulphur Content, %: 11.5-12.5 220KG/Drum.
Akd wax, quat 188, akd emulsionfier, cationic reagent, 3 chloro 2 hydroxypropyl trimethyl ammonium chloride, polydadmac, sae sizing agent.
1. Product name: AKD High Polymer Emulsifier 2. Product introduction: AKD high polymer emulsifier (instead of traditional cationic starch based) is a kind of cationic polymer product developed by our technical department,which is the initiative developed product in the market.It can not only emulsify AKD wax,but also proteched the AKD colloid dispersion and aid retention,it also can increase AKD sizing efficiency(2%-8%).It can get the high stability and better fixing effect AKD emulsion by mechanical stirring,in the meantime it greatly decrease AKD hygrolysis during storage and sizing process.Final AKD Emulsion shelf time is about 6 months which is longer than starch emulsified AKD emulsion.The final AKD Emulsion also has quicker curing effect. 3.Specification and Index: Item Specification Appearance light yellow viscosity liquid Solid content 40%min Viscosity,mPa.s,25�°C 2000-10000 mPa.s pH value 2-5 shelf life 6 months 4. Application: This Emulsifier greatly restricts the AKD hydrolysis and the migration aptitude.It can replace the starch based emulsifier and AKD curing agent,at the same time decrease the AKD WAX using quantity.The final AKD Emulsion by this high polymer emulsifier can realize 80% sizing effect after paper machine,and almost totally realize after rewinding,which can let the paper immediately get the good water resistance effect,so less surface sizing agent in size press can fulfill all the sizing requirement.For detail using method,please contact Greatland Chemicals Co.,Ltd. 5. Package and storage: It should be stored in the warehouse with dry and cool condition protected from frozen and sunlight directly. The temperature should be below 30 C. Packing with 200kg, 1000kg/drum.
Cationic reagent QUAT188 are aqueous solutions of monomer (3-chloro-2- hydroxypropyl) trimethylammonium chloride (CHPTAC). Cationic reagent are clear,odorless liquids.It is used to modify natural and syntheti polymers into quaternary ammonium compounds. It is used industrially for chemical processing of personal-care products, pulp and paper, textiles, and for water management. Advantage: The product appearance is transparent liquid, colorless and tasteless, the impurity content is low, is less than 10ppm. Because the use of continuous production process, product quality is stability; The product response rate is higher than 90%. Application area 1) paper industry Mainly as a liquid cationic reagent, widely used in fiber, cellulose derivatives and starch modified; as paper internal application of adhesive, filler and fine fiber interception of additives. (2) water treatment industry Suspended matters in water is negatively charged, react whit liquid cationic etherifying agent,produce cationic polymer as flocculants are widely used in water purification. (3) chemical industry for daily use The reaction of aqueous cationic etherifying agent create cationic guar gum are important chemicals. Package : 250kg plastic drum , IBC drum , Flexitank
The cationic etherifying agent is a kind of application in the field of fine chemical products.Its chemical name is N- (3- chloro -2- hydroxypropyl) N, N, N three methyl ammonium chloride (CTA),molecular formula is C6H15NOCl2, formula weight is 188.1,The water solution at room temperature is 69%, and can be converted into the structure of epoxidation immediately under alkaline condition. CHPTAC 69% C6H15ONCl2 QUAT 188 has many names such as quat 188, CHPTAC, PTAC, CTA, Cationic Reagent, etc, used for cationic starch, cationic guar gum, cationic cellulose, cationizing reagent. Tiancheng is one of the world`s largest manufacturers of Alkyl Ketene Dimer (AKD Wax) with 20 years experiences and the largest and best manufacturer of cationic reagent (3-Chloro-2-Hydroxypropyltrimethyl Ammonium Chloride/quat 188/CHPTAC), raw material for producing cationic starch in China. Other featured products:General AKD Emulsifier 25%, Quat 188 69%,Polymer emulsifier 40%, PolyDADMAC 40%,Wet strenght agent 12.5%/25%, Styrene Acrylic Copolymer , Fixing Agent 50%, Poly Aluminium Chloride, Sodium Gluconate Oxidized Starch,ect. Advantage: The product appearance is transparent liquid, colorless and tasteless, the impurity content is low, is less than 10ppm. Because the use of continuous production process, product quality is stability; The product response rate is higher than 90%. Application area 1) paper industry Mainly as a liquid cationic etherifying agent, widely used in fiber, cellulose derivatives and starch modified; as paper internal application of adhesive, filler and fine fiber interception of additives. (2) Water treatment industry Suspended matters in water is negatively charged, react whit liquid cationic etherifying agent,produce cationic polymer as flocculants are widely used in water purification. (3) chemical industry for daily use The reaction of aqueous cationic etherifying agent create cationic guar gum are important chemicals. Storage condition: container must be built strictly, stored in a cool ventilated dry place.
We produced high-quality surface sizing agent. Including Cationic surface sizing agent and Anionic surface sizing agent. Our chemicals are hot-sale in Southeast Asia, India, Pakistan, Middle East and egypt. Hope to support your business better
Cationic reagent 65% 69%, akd wax, wet strength agent, akd emulsion, polyaluminium chloride, CMC, sodium gluconate.
AKD Wax, Surface sizing agent, Dry strength agent , Paper dye, Water-baesd ink, Carbomer;.
CAS No.:25035-69-2 Other Names:Modified Carbomer Place of Origin:Tianjin, China Appearance:Milky Liquid Purity:30 Application:Make gel Packing:220kg/drum
Water/sewage treatment chemicals,papermaking auxiliary agents,such as pac(ployaluminium chloride),pam(polyacrylamide),akd wax,akd emulsion,ect..
Apermaking chemicals (AKD wax and its additives, surface sizing agent, cationic rosin sizing, wet/dry strength agent, retention and filter aid chemicals, water resistant agent, lubricant ), water treatment chemicals (HEDP, ATMP, PBTC, EDTMPA, HPMA, MA/AA, decoloring agent and pam) and pesticide chemicals.
Appearance: yellow amber liquid Purity: 40%(+/-0.5%) solid content Application: it has the function of akd emulsified?colloid pretection, retentiom aiding and synergism and so on, can apply to various paper grades.
Cationic polyacrylamide (cpam) Introduction This product is a water- soluble high polymer.Its not soluble in most organic solvents. It has good flocculating activity, and can reduce the friction resistance between liquid. Specification Product:pam Solid content:min. 88% Ionicity:cationic Appearancewhite fine-sand shaped powder Molecular weight:6million-10million Ion concentration:20%30%40%50%-80% Shelf life:24 months Application 1.This product is mainly used for the sludge dewatering to decrease moisture content of sludge. 2.This product is used in the treatment of industrial wastewater and municipal wastewater. 3.This product can be used for papermaking to improve dry and wet strength of paper and to increase the reservation of tiny fibers and fillings. Application method 1.It should be diluted to the concentration of 0.1%(based on solid content).It is better to use neutral or desalted water. 2.When making up solution, the product should be scattered evenly in the stirring water, usually the temperature is between 50-60. Package and storage Packed in 25kgs woven bag with polypropylene. This product is hygroscopic, so it is should be sealed and stored in a dry and cool place below 35.
Appearance: pale yellow and viscous liquid, cationic Purity: 12.5% solid content This product can be used both in neutral and in alkalescent conditions.It can make the paper settled with higher stability in its sizes, which is with many advantages, such as wide ph applications, nontoxic, excellent absorbenct, higher dry/wet intensity, surface intensity, burst and excellent ink-absorbing ability etc.
Anionic polyacrylamide (apam) Introduction This product is a water- soluble high polymer.Its not soluble in most organic solvents. It has good flocculating activity, and can reduce the friction resistance between liquid. Specification Product:apam Solid content:min. 88% Ionicity:anionic Appearance:white fine-sand shaped powder Molecular weight:15million-20million Ion concentration:8%15%25%40% Shelf life:24 months Application 1.This product can be used to treat industrial wastewater and mining wastewater. 2.This product can also be used as additives of the mud materials in oil-field, geological drilling and well boring. Application method 1.It should be diluted to the concentration of 0.1%(based on solid content).It is better to use neutral or desalted water. 2.When making up solution, the product should be scattered evenly in the stirring water, usually the temperature is between 50-60. Package and storage Packed in 25kgs woven bag with polypropylene. This product is hygroscopic, so it is should be sealed and stored in a dry and cool place below 35.