Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 Unit Per Month Price And Quantity: Price Range 850000.00 - 1050000.00 INR/Number Minimum Order Quantity 1 Unit Product Specifications: Pressure 6-7 Bar Power Source Electricity Technology Other Operating Type Automatic Color Dark Blue Weight (kg) 3.5-5 Metric Ton Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Product Type Other Surface Treatment Painted Power 420 Volt (v) Usage/Applications Casting, Forging, Sheet metal etc Product Description: Swing Table type shot blast machines are designed and built asfully integrated blast cleaning systems to handle larger and/or more fragilecastings than barrel machines. They provide a cost effective solution for batch cleaning. Swing Table type Machine consists of Horizontal door with a table type work/job handling system. This table is directly mountedon the door and it rotates on its own axis, drive unit of this swing table isprovided outside the door. This table swings out as the door is opened, making the full area easily approachable for loading and unloading of the components. For loading the components, door of the machine is opened manually &components to be blasted are loaded on to the work table area and the door ofthe machine is closed. After this Blast wheel unit,which is strategically placed on the Blast cabinet, is started. Blast wheelwill fire the abrasive at high velocity on the components placed on therotating work table and blast cleans them thoroughly. Rotational mechanism oftable ensures that each and every portion of the component will get exposed tothe blast stream for through cleaning. The arrangement of the blast wheel ensures optimum blastcleaning and maximum utilization of the abrasive energy. After the required blasting cycle, blast wheel unitshuts off and door of the machine is opened manually for unloading of thecomponents.
Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 Unit Per Month Price And Quantity: Price Range 650000.00 - 950000.00 INR/Unit Minimum Order Quantity 1 Unit Product Specifications: Pressure 6-7 Bar Surface Treatment Painted Technology Other Usage/Applications Casting, Forging, Sheet Metal Power 420 Volt (v) Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Operating Type Automatic Product Type Other Color Dark Blue Power Source Electricity Product Description: Table type shot blast machines are designed and built asfully integrated blast cleaning systems to handle larger and/or more fragile castingsthan barrel machines. They provide a cost effective solution for batchcleaning. Table type Machine consists of Horizontaldoor with a table type work/job handling system. This table is directly mountedon the door and it rotates on its own axis, drive unit of this swing table isprovided outside the door. This table swings out as the door is opened, makingthe full area easily approachable for loading and unloading of the components.For loading the components, door of the machine is opened manually &components to be blasted are loaded on to the work table area and the door ofthe machine is closed. After this Blast wheel unit,which is strategically placed on the Blast cabinet, is started. Blast wheelwill fire the abrasive at high velocity on the components placed on therotating work table and blast cleans them thoroughly. Rotational mechanism oftable ensures that each and every portion of the component will get exposed tothe blast stream for through cleaning. The arrangement of the blast wheel ensures optimum blastcleaning and maximum utilization of the abrasive energy. After the required blasting cycle, blast wheel unitshuts off and door of the machine is opened manually for unloading of thecomponents.
Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Surface Treatment Painted Weight (kg) 3.5-4 Metric Ton Supply Ability : 7-10 Unit Per Month Price And Quantity Price Range 850000.00 - 1050000.00 INR/Number Minimum Order Quantity 1 Unit Product Specifications: Weight (kg) 3.5-4 Metric Ton Surface Treatment Painted Operating Type Automatic Technology Other Power 420 Volt (v) Usage/Applications Casting, Forging, Sheet metal etc Color Dark Blue Power Source Electricity Product Type Other Product Description: Table type shot blast machines are designed and built asfully integrated blast cleaning systems to handle larger and/or more fragilecastings than barrel machines. They provide a cost effective solution for batchcleaning. Table type Machine consists of Horizontaldoor with a table type work/job handling system. This table is directly mountedon the door and it rotates on its own axis, drive unit of this swing table isprovided outside the door. This table swings out as the door is opened, makingthe full area easily approachable for loading and unloading of the components.For loading the components, door of the machine is opened manually &components to be blasted are loaded on to the work table area and the door ofthe machine is closed. After this Blast wheel unit,which is strategically placed on the Blast cabinet, is started. Blast wheelwill fire the abrasive at high velocity on the components placed on therotating work table and blast cleans them thoroughly. Rotational mechanism oftable ensures that each and every portion of the component will get exposed tothe blast stream for through cleaning. The arrangement of the blast wheel ensures optimum blastcleaning and maximum utilization of the abrasive energy. After the required blasting cycle, blast wheel unitshuts off and door of the machine is opened manually for unloading of thecomponents.
Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Other Supply Ability : 7-10 Number Per Month Price And Quantity: Price Range 600000.00 - 800000.00 INR/Number Minimum Order Quantity 1 Number Product Specifications: Product Type Other Pressure 6-7 Bar Technology Other Usage/Applications Casting, Forging, Sheet Metal Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Weight (kg) 4.5-6.5 Metric Ton Operating Type Automatic Power 420 Volt (v) Power Source Electricity Surface Treatment Other Color Dark Blue Product Description Hanger type shot blast machines designed and built as fully integrated blast cleaning systems to handle large/small or more fragile castings than barrel/table type machines. They provide a cost-effective solution for batch cleaning. Hanger typeMachine consists of horizontal door with a rotating hanger type work/job handling system. This hanger is directly mounted on the door of the machine and itrotates on its own axis, drive unit of this hanger is provided outside the door. This hanger swings out as the door is opened, making the full area easily approachable for loading and unloading of the components. For loading the components, door of the machine is opened manually & components to be blasted are hanged one by one on to the door hanger and the door of the machineis closed. Specification: Number of Doors Single Door Brand Adl Blastek Power Required 14.5 HP Capacity 10-15 ton/day Voltage (V) 415 V Driven Type Belt Driven Wheel No. Of Blast Wheels 2 Wheel Size (inch) 12.5'' X 2.5'' Model Number BT-SPH-1 Load Carrying Capacity Of Hanger (kg) 300 Kg Automatic Grade Automatic Blast Wheel Power 5 HP No. of Door with Hanger Hook 1 Diameter and Height Of Hanger Turning Meter 600 x 700 mm
Product Details: Product Typ e Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 , , Unit Per Month Price And Quantity: Price Range 1200000.00 - 1500000.00 INR/Unit Minimum Order Quantity 1 , , Unit Product Specifications: Power 420 Volt (v) Power Source Electricity Operating Type Automatic Product Type Other Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Pressure 6-7 Bar Technology Other Color Dark Blue Surface Treatment Painted Usage/Applications Casting, Forging, Sheet Metal Product Description: Hanger type Machine consists of horizontal door with a rotating hanger type work/job handlingsystem. This hanger is directly mounted on the door of the machine and itrotates on its own axis, drive unit of this hanger is provided outside thedoor. This hanger swings out as the door is opened, making the full area easilyapproachable for loading and unloading of the components. For loading the components,door of the machine is opened manually & components to be blasted arehanged one by one on to the door hanger and the door of the machine is closed. After this two nos ofBlast wheel units which are strategically placed on the Blast cabinet, is started.Blast wheels will fire the abrasive at high velocity on the components hangedon the hangers and rotating in clockwise and Anti-clockwise direction and blastcleans them thoroughly. Bi-directional rotational mechanism of hanger ensuresthat each and every portion of the component will get exposed to the blaststream for through cleaning. The arrangement of the blast wheel ensures optimumblast cleaning and maximum utilisation of the abrasive energy. After the required blastingcycle, blast wheel unit shuts off and door of the machine is opened manuallyfor unloading of the components.
Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 , , Unit Per Month Price And Quantity: Minimum Order Quantity 1 , , Unit Price Range 1200000.00 - 1500000.00 INR/Unit Color Dark Blue Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Pressure 6-7 Bar Technology Other Operating Type Automatic Power Source Electricity Product Type Other Surface Treatment Painted Power 420 Volt (v) Usage/Applications Casting, Forging, Sheet Metal Product Description Hanger type shot blast machines designed and built as fully integrated blast cleaning systems to handle large/small or more fragile castings than barrel/table type machines. They provide a cost effective solution for batch cleaning. Hanger type Machine consists of horizontal door with a rotating hanger type work/job handling system. This hanger is directly mounted on the door of the machine and it rotates on its own axis, drive unit of this hanger is provided outside the door. This hanger swings out as the door is opened, making the full area easily approachable for loading and unloading of the components. For loading the components, door of the machine is opened manually & components to be blasted are hanged one by one on to the door hanger and the door of the machine is closed. After this two nos of Blast wheel units which are strategically placed on the Blast cabinet, is started. Blast wheels will fire the abrasive at high velocity on the components hanged on the hangers and rotating in clockwise and Anti-clockwise direction and blast cleans them thoroughly. Bi-directional rotational mechanism of hanger ensures that each and every portion of the component will get exposed to the blast stream for through cleaning. The arrangement of the blast wheel ensures optimum blast cleaning and maximum utilization of the abrasive energy. After the required blasting cycle, blast wheel unit shuts off and door of the machine is opened manually for unloading of the components.
Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 Kilowatt Per Month Price And Quantity: Price Range 1200000.00 - 1500000.00 INR/Unit Minimum Order Quantity 1 Kilowatt Product Specifications: Power Source Electricity Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Operating Type Automatic Usage/Applications Casting, Forging, Sheet metal etc Power 420 Volt (v) Surface Treatment Painted Technology Other Color Darlk Blue Product Type Other Pressure 6-7 Bar Weight (kg) 7-8 Metric Ton
Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 1 Unit Per Month Price And Quantity: Price Range 1650000.00 - 1980000.00 INR/Unit Minimum Order Quantity 1 Unit Product Specifications Pressure 6-7 Bar Product Type Other Surface Treatment Painted Color Dark Blue Weight (kg) 8-9 Metric Ton Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Power Source Electricity Usage/Applications Casting, Forging, Sheet metal etc Power 420 Volt (v) Technology Other Operating Type Automatic Product Description: Roller Conveyor Shot Blasting MachineÃ?? The Tunnel type/ roller conveyor shot blasting machine is best suitable for the shot blasting of Rods/bars/Pipes/ms sheet..etc. It consists of inlet and outlet side Roller conveyors as material handling systems. The components to be blasted are placed on inlet side of the roller conveyor, from where it travels forward and enters into the inlet tunnel. After passing through the inlet tunnel components enters into the blast zone which consists of 4 no's of Blast Wheels. All these Blast wheel units are strategically placed around the Blast cabinet. The arrangement of the blast wheel ensures optimum blast cleaning and maximum utilization of the abrasive energy. Blast wheels fires the abrasive at high velocity on the forward moving components & blast cleans them thoroughly. Blasted material moves forward and enters into the outlet tunnel.
Roller Conveyor Shot Blasting Machine for Bright Bars Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 1 Unit Per Month Price And Quantity Price Range 100000.00 - 300000.00 INR/Unit Minimum Order Quantity 1 Unit Product Specifications: Product Type Other Warranty All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Power Source Electricity Operating Type Automatic Usage/Applications Casting, Forging, Sheet Metal Pressure 6-7 Bar Power 420 Volt (v) Color Dark Blue Surface Treatment Painted Technology Other Product Description: TheTunnel type/ roller conveyor shot blasting machine is best suitable for the shotblasting of Round steel Pipes..etc. It consists of inlet and outlet side Rollerconveyors as material handling systems. The components to be blasted are placedon inlet side of the roller conveyor, from where it travels forward and entersinto the inlet tunnel. After passing through the inlet tunnel components entersinto the blast zone which consists of 4 no�?�¢�?â?¬�?â?¢s of Blast Wheels. All these Blast wheel units are strategically placedaround the Blast cabinet. The arrangement of the blast wheel ensures optimum blastcleaning and maximum utilization of the abrasive energy. Blast wheels fires the abrasive at high velocity onthe forward moving components & blast cleans them thoroughly. Blastedmaterial moves forward and enters into the outlet tunnel. The spent abrasivefrom blasting operation after passing through the perforated floor plates willget collected into the cabinet�?�¢�?â?¬�?â?¢s bottom storage hopper. From where it istransferred to the bucket elevator, which elevate the abrasivevertically and discharges the same into a media separation unit where dust andfine abrasives are cleaned ensuring that only clean abrasive will re-circulateto the blast wheel units for effective and better cleaning. A Dust collectionsystem is provided with the machine which will continuously remove the dust andfine particles, thus keeping the inside of the machineand the nearby environment dust & pollution free.
Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 Unit Per Month Price And Quantity: Price Range 1200000.00 - 1500000.00 INR/Unit Minimum Order Quantity 1 Unit Product Specifications: Color Dark Blue Product Type Other Pressure 6-7 Bar Power 420 Volt (v) Power Source Electricity Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Technology Other Usage/Applications Casting, Forging, Sheet Metal Operating Type Automatic Surface Treatment Painted Product Description: It consists of inlet and outlet side Rollerconveyors as material handling systems. The components to be blasted are placedon inlet side of the roller conveyor, from where it travels forward and entersinto the inlet tunnel. After passing through the inlet tunnel components entersinto the blast zone which consists of 4 nos of Blast Wheels. All these Blast wheel units are strategically placedaround the Blast cabinet. The arrangement of the blast wheel ensures optimum blastcleaning and maximum utilization of the abrasive energy. Blast wheels fires the abrasive at high velocity onthe forward moving components & blast cleans them thoroughly. Blastedmaterial moves forward and enters into the outlet tunnel. The spent abrasivefrom blasting operation after passing through the perforated floor plates willget collected into the cabinets bottom storage hopper. From where it istransferred to the bucket elevator, which elevate the abrasivevertically and discharges the same into a media separation unit where dust andfine abrasives are cleaned ensuring that only clean abrasive will re-circulateto the blast wheel units for effective and better cleaning. A Dust collectionsystem is provided with the machine which will continuously remove the dust andfine particles, thus keeping the inside of the machineand the nearby environment dust & pollution free.
Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 Unit Per Month Product Specifications: Operating Type Automatic Technology Other Product Type Other Color Dark Blue Pressure 6-7 Bar Usage/Applications Casting, Forging, Sheet Metal Surface Treatment Painted Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Power Source Electricity Power 420 Volt (v) Product Description: It consists of inlet and outlet side Rollerconveyors as material handling systems. The components to be blasted are placedon inlet side of the roller conveyor, from where it travels forward and entersinto the inlet tunnel. After passing through the inlet tunnel components entersinto the blast zone which consists of 4 nos of Blast Wheels. All these Blast wheel units are strategically placedaround the Blast cabinet. The arrangement of the blast wheel ensures optimum blastcleaning and maximum utilization of the abrasive energy.Blast wheels fires the abrasive at high velocity onthe forward moving components & blast cleans them thoroughly. Blastedmaterial moves forward and enters into the outlet tunnel. The spent abrasivefrom blasting operation after passing through the perforated floor plates willget collected into the cabinets bottom storage hopper. From where it istransferred to the bucket elevator, which elevate the abrasivevertically and discharges the same into a media separation unit where dust andfine abrasives are cleaned ensuring that only clean abrasive will re-circulateto the blast wheel units for effective and better cleaning. A Dust collectionsystem is provided with the machine which will continuously remove the dust andfine particles, thus keeping the inside of the machineand the nearby environment dust & pollution free.
Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 Unit Per Month Price And Quantity: Minimum Order Quantity 1 Unit Price Range 2500000.00 - 3000000.00 INR/Number Product Specifications: Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Product Type Other Power Source Electricity Power 420 Volt (v) Usage/Applications Casting, Forging, Sheet metal etc Color Dark Blue Technology Other Operating Type Automatic Surface Treatment Painted Pressure 6-7 Bar Product Description: The Tunnel type/ roller conveyor shot blasting machine is best suitable for the shot blasting of I/H-Beam /Structural Steel Components etc. It consists of inlet and outlet side Roller conveyors as material handling systems. The components to be blasted are placed on inlet side of the roller conveyor, from where it travels forward and enters into the inlet tunnel. After passing through the inlet tunnel components enters into the blast zone which consists of 4 nos. of Blast Wheels. All these Blast wheel units are strategically placed around the Blast cabinet. The arrangement of the blast wheel ensures optimum blast cleaning and maximum utilization of the abrasive energy. Blast wheels fires the abrasive at high velocity onthe forward moving components & blast cleans them thoroughly. Blasted material moves forward and enters into the outlet tunnel. The spent abrasive from blasting operation after passing through the perforated floor plates will get collected in to the cabinet's bottom storage hopper. From where it is transferred to the bucket elevator, which elevate the abrasive vertically and discharges the same into a media separation unit where dust and fine abrasives are cleaned ensuring that only clean abrasive will re-circulate to the blast wheel units for effective and better cleaning. A Dust collection system is provided with the machine which will continuously remove the dust and fine particles, thus keeping the inside of the machine and the nearby environment dust & pollution free.
Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 Unit Per Month Price And Quantity: Minimum Order Quantity 1 Unit Price Range 2000000.00 - 2500000.00 INR/Number Product Specifications: Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Pressure 6-7 Bar Weight (kg) 3.5-4 Metric Ton Color Dark Blue Product Type Other Power 420 Volt (v) Usage/Applications Casting, Forging, Sheet metal etc Operating Type Automatic Surface Treatment Painted Technology Other Power Source Electricity Product Description It consists of inlet and outlet side Roller conveyors as material handling systems. The components to be blasted are placed on inlet side of the roller conveyor, from where it travels forward and enters into the inlet tunnel. After passing through the inlet tunnel components enters into the blast zone which consists of 4 no's of Blast Wheels. All these Blast wheel units are strategically placed around the Blast cabinet. The arrangement of the blast wheel ensures optimum blast cleaning and maximum utilization of the abrasive energy. Blast wheels fires the abrasive at high velocity on the forward moving components & blast cleans them thoroughly. Blasted material moves forward and enters into the outlet tunnel. The spent abrasive from blasting operation after passing through the perforated floor plates will get collected in to the cabinet's bottom storage hopper. From where it is transferred to the bucket elevator, which elevate the abrasive vertically and discharges the same into a media separation unit where dust and fine abrasives are cleaned ensuring that only clean abrasive will re-circulate to the blast wheel units for effective and better cleaning. A Dust collection system is provided with the machine which will continuously remove the dust and fine particles, thus keeping the inside of the machine and the near by environment dust & pollution free.
Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 Unit Per Month Price And Quantity: Minimum Order Quantity 1 Unit Price Range 1200000.00 - 1500000.00 INR/Unit Product Specifications: Power Source Electricity Surface Treatment Painted Product Type Other Technology Other Power 420 Volt (v) Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Pressure 6-7 Bar Color Dark Blue Usage/Applications Casting, Forging, Sheet Metal Operating Type Automatic Product Description: The diabola conveyor shotblasting machine is best suitable for the shot blasting of round BARS. Itconsists of inlet and outlet side diabola conveyors as material handling systems. The components to be blasted are placed on inlet side of the rollerconveyor, from where it travels forward and enters into the inlet tunnel. Afterpassing through the inlet tunnel components enters into the blast zone which consists of 1 no. of Blast Wheel. This Blast wheel unit is strategicallyplaced around the Blast cabinet. The arrangement of the blast wheel ensures optimum blast cleaning and maximum utilization of the abrasive energy. Blast wheels fires the abrasive at high velocity onthe forward moving & rotating components & blast cleans them thoroughly. Blasted material moves forward and enters into the outlet tunnel. The spent abrasive from blasting operation after passing through the perforated floor plates will get collected into thecabinet's bottom storage hopper. From where it is transferred to the buck etelevator, which elevate the abrasive vertically and discharges the same into a media separation unit where dust and fine abrasives are cleaned ensuring that onlyclean abrasive will re-circulate to the blast wheel units for effective and better cleaning. A Dust collection system is provided with the machine whichwill continuously remove the dust and fine particles, thus keeping the inside of the machine and the nearby environment dust & pollution free.
Product Details: Product Type Other Technology Other Power Source Pneumatic Operating Type Semi Automatic Surface Treatment Painted Color As per scope of customer Product Specifications: Color As per scope of customer Product Type Other Surface Treatment Painted Technology Other Power Source Pneumatic Operating Type Semi Automatic Product Description Specification: Brand Adl Blastek Automation Grade Semi Automatic Phase Three Voltage 415 V Height 600 mm Width 600 mm Depth 600 mm
Product Details: Product Type Other Technology Other Power Source Pneumatic Operating Type Semi Automatic Surface Treatment Painted Product Specifications: Power Source Pneumatic Operating Type Semi Automatic Product Type Other Technology Other Surface Treatment Painted Specification Brand Adl Blastek Automation Grade Semi Automatic Phase Three Voltage 415 V Height 600 mm Width 600 mm Depth 600 mm
Product Details: Product Type Other Technology Other Power Source Pneumatic Operating Type Semi Automatic Surface Treatment Painted Product Specifications: Surface Treatment Painted Technology Other Power Source Pneumatic Product Type Other Operating Type Semi Automatic Product Description: Cabinet type wet blasting machines are pneumatic operated machines used for semi-automatic surface treatment. It is used for paint removal and etching of various parts and components. The cabinet type wet blasting machine uses a high-pressure water and abrasive media mixture to blast the part or component. This is a closed type machine which helps to reduce the mess and dust created by the blasting process. The cabinet can be opened to access the components and the blasting head can be adjusted to reach the desired area. The wet blasting process will not damage the surface of the part or component as the water helps to prevent any kind of surface damage. The machine is also equipped with safety features to prevent any kind of accidents.
We provide airless shot blasting machine having special material handling system. Job Conveying system consists of Tyre type Skew Rollers, arranged at an angle to each other. So that pipe will move forward with rotational movement/mechanism. Machine is best suitable for the high production output and uniform finish. The components placed on inlet side of the Skew conveyor travels forward along with rotational movement and enters into the inlet tunnel. After passing through the inlet tunnel components enters into the blast zone which consists of Blast Wheel. These Blast wheel units are strategically placed around the Blast cabinet. Blast wheels fires the abrasive at high velocity on the forward & rotationally moving component & blast cleans them thoroughly. The Skew conveyors are driven by gearbox provided with VFD control. VFD control enables the customer to change/synchronize the speed of the conveying system with respect to the required blast cleaning operation. Machine consists of Blast cabinet / Mn. Steel Lining Inside cabinet / Heavy Duty Blast Wheels/ Abrasive Recycling and re-circulation system/ Automatic Abrasive Control Mechanism/ Inlet & Outlet side Tyre type Skew rollers/ Dust Collector
SPM are used for inducing a residual compressive stress on the surface of the component thereby improving its resistance to fatigue failure, which result in better life and reliable operation. Indexing Table Type Shot Peening Machine Coil Spring Shot Peening Machine Diabola Type Shot Peening Machine Leaf Shot Peening Machine Pneumatic Shot Peening Machine Pneumatic Robotic Shot Peening Machine
Our Grapeseed oil is processed from grape seeds. It's relatively high in vitamin E and phenolic antioxidants, as well as a rich source of omega-6 fatty acids. It has a moderately high smoke point of approximately 216C (421 F). Due to its clean, light taste, and high polyunsaturated fat content, it may be used as an ingredient in salad dressings and mayonnaise and as a base for oil infusions of garlic, rosemary, or other herbs or spices. It is widely used in baked goods, pancakes, and waffles. It is sprayed on raisins to help them retain their flavor
