Feature 1.Super Fast Dry-90m/s dual jet air efficient 7 seconds dry time. 2.Hygiene-HEPA Filtration System proven to remove 99.97% of potentially present bacteria at 0.3 microns from the air. 3.Classic Design-Used in London Olympic, Mercedes Benz , Hilton Hotel, Disney etc. 4.Brushless Motor-Start stable and fast with longer lifetime. 5.Energy Efficient-Saving 85% energy than conventional hand dryer and 95% cost savings Vs. paper towels.Saves time, money and energy. Packaging Details: 1Pcs/ctn, Carton size:725*350*275mm N.W /G.W:10.5kg/12.5kg Delivery Time: 5-25 days after order confirmed -
1. Quick Dry105m/s high speed air blow, 10-15 seconds dry time, quick dry for your hands 2. Save Energy80% less energy than conventional hand dryers, 95% cost savings VS. paper towels 3. ABS MaterialDurable ABS polycarbonate, with high strength and good heat resistance 4. Intelligent SystemAuto Temperature Controller adjust based on environment temperature, with LED indicator 5. Removable FilterRemovable Filter, easy to clean and replace -
Refrigerated air dryer Refrigerated impressed air dryer 1). Air-cooling refrigerated air dryer Inlet temperature: Normal inlet temperature45º High inlet temperature80º Cooling method: air-cooling Ambient temperature: 38º Design dew point: 1.7º Refrigerant: r-22 Inlet pressure: 0.2~1.0mpa Pressure drop: 0.02mpa 2). Water-cooling refrigerated air dryer Inlet temperature: Normal inlet temperature: 45º High inlet temperature: 80º Cooling method: water-cooling Design dew point: 1.7º Refrigerant: r-22 Inlet pressure: 0.2~1.0mpa Pressure drop: 0.02mpa Cooling water inlet temperature: 32º Cooling water inlet pressure: 0.2~0.4mpa
Holysun offers two types of Refrigerated Air Dryer: 1). Air-cooling refrigerated air dryer Inlet temperature: Normal inlet temperature: less than 45 celsius degree High inlet temperature: less than 80 celsius degree Cooling method: Air-cooling Ambient temperature: less than 38 celsius degree Dew point: 2~10 celsius degree Refrigerant: R-22 /R-134a Inlet pressure: 0.2~1.0MPa Pressure drop: less than 0.02MPa 2). Water-cooling refrigerated air dryer Inlet temperature: Normal inlet temperature: less than 45 celsius degree High inlet temperature: less than 80 celsius degree Cooling method: Water-cooling Dew point: 2~10 celsius degree Refrigerant: R-22 /R-134a Inlet pressure: 0.2~1.0MPa Pressure drop: less than 0.02MPa Cooling water inlet temperature: less than 32 celsius degree Cooling water inlet pressure: 0.2~0.4MPa
Compressed Air Systems should be designed for just the right quality of air at the most economical costs. We have a wide range of dryers for all your needs, for general plant and instrumentation air. Desiccant Dryers, heatless type, use 10 to 15% purge air for regeneration of desiccant i.e. 10 to 15% of compressor power (HP) is being used as energy operating costs for drying thereby increasing the capital costs in installing extra capacity of compressor. They contain two pressure vessels or towers, each containing a quantity of desiccant. One tower dries the air, while the other is being reactivated. The 'heatless' principle of regeneration is based on the physical property of the desiccant, which liberates the adsorbed water vapour, if air with a low water vapour pressure is passed through it.
We are identified as one of the most reputed Refrigerated Compressed Air Dryer Manufacturers and Suppliers, based in the Capital City of India. We provide Refrigerated Air Dryers Using Freon Gas. The superior Refrigerated Air Dryer System provided by us is extremely effective to purify impure compressed air that contains dust, oil, and moisture.
We are identified as one of the most reputed Refrigerated Compressed Air Dryer Manufacturers and Suppliers, based in the Capital City of India. We provide Refrigerated Air Dryers Using Freon Gas. The superior Refrigerated Air Dryer System provided by us is extremely effective to purify impure compressed air that contains dust, oil, and moisture.
Supplied as a complete unit, which is ready for use. Low initial cost. The heatless method contributes to low maintenance and is most reliable. They are self-regenerative and produce low levels of noise. The specially designed digital electronic control for the variable cycle of adsorption dryer allows automatic switching off of the regeneration air. This resulting in a lower cost expenditure. The specially designed high -efficiency dryers can be used in all applications,and the regeneration air flow can be adjusted to suit the particular operating conditions.Therefore running cost reduced. The specially mixed adsorption medium ensures a longer life to the unit. Fully automatic systems work continuously gives uninterrupted airflow. It requires only 220V,AC power supply to operate the system.
(1)terminal air dry filter--realizing refrigeration through a semiconductor cooler, it is a piece of equipment that provides purifying technologies for drying compressed air of a small flow 5scfm/min to 21scfm/min at the terminal where the air is used. (2)high efficiency -- by way of freeze drying, it accomplish quite high dryness and high cost-effective ratio as well. This is a technology that satisfies the requirements in pneumatic operation in most cases and a technology that is most widely utilized. (3) advanced utility model patent--the utility model patent cooler allows adequate cooling of air in a small volume and allows air-water separation to lower the humidity of the compressed air. (4) high reliability and low cost--it needs no refrigerant and features low noise, long life and low cost of maintenance, as there is mo mechanical moving parts except the fan. (5)compactness--ultra-small volume, easy installation and use, and simple operation. Power:240w,working pressure:0.8mpa,air flow:5scfm,pressure dew point:less than 10 degree celsius. Dimension:230*161*285mm, weight:7kg.
Dryspell series air dryers * capacity from 5 cfm to 100 cfm * compact in design - light weight * working pressure up to 16 barg Available on request
Air dryer complete with filters and oil adsorbers From 10 m3/hr to 4000m3/hr flow 7bar pressure Variouse sizes from 1/8 inch pipe size to 6 inch
ERCOM KOMPRESOR Produces screw air compressors with many different specifications. Pressure Air Dryers Request catalog and price list for more details.
Heatless desiccant dryer uses compressed air as a purge to regenerate, it costs maximum compressed air. Reference performance: Max. compressed air consumption: 14.5% Max. inlet temperature: 45°C, 113°F Max. inlet oil content: 0.1 ppm High quality desiccant: High performance desiccant Pressure dew point: -20~-70°C, -4~-94°F Max. pressure drop: 0.21 bar Working pressure range: 4-10 bar, optimum: 7 bar/102 psi Robust and compact design: Forklift slots, lifting eyes Controller: Electronic control board Time-based steering Galvanized piping with flanged connections: Easy maintenance and less chance of leakages Butterfly valves: Good quality butterfly valves Filters (optional): DP offer integrated filters for desiccant dryers Pre-filters could eliminate oil contaminant from compressed air, increasing lifetime of desiccant. After-filters could eliminate dust
Air Dryer Seat,Website
Air Dryer Cartrige
Ingersoll Rand offers a full range of compressor and dryer packages designed specifically to provide clean, dry compressed air for process and instrument air applications. Instrument and Service Air (IA & SA) equipment is used in a wide range of industries, from power generation and oil and gas, to chemical and manufacturing. Instrument and service air systems generally consist of compressors, dryers, filters, receivers, coolers, and control systems. These work together to provide stable and reliable air to a variety of plant consumers; some of which play a critical role in maintaining plant operation and safety. As a result, any equipment or systems need to be properly designed, and capable of producing the right quantity of quality air as required by users. Ingersoll Rand can design instrument air packages with various compressor modifications to provide an optimum solution for your project: Engineered-to-order solutions that can be supplied as per customer requirements. Deliver the total package, including the PLC based controller. Fully integrated with dryers, filters and piping, etc. in various custom installation types, including the container, skid, and supply of system components. Reliability: we use high-quality components to ensure maximum performance over time according to customer requirements. Provide the optimum solution, utilizing the best compressor working principles. For use in safe areas as well as hazardous areas. Deliver Simple â??Plug & Playâ?? Installation. All of our instrument air packages can be engineered to meet global and local quality certificates issued by various institutions worldwide, including API 618, API 619, API 672, ATEX, IECEx, and others. Ingersoll Rand can design the instrument air packages with different compressor modifications to meet the optimum solution for your project.
Hot Air Dryer Machine For Lithium ion Battery Electrode and Material Drying Process
Specification - The air dryer can be repeatedly used after heated in a microwave or an oven. - Air filters at inlets are included. - Length: 290mm - Outer Diameter:50mm - Net Weight:0.43kg - Air Inlet/Outlet: Open Product Details Silica air dryer for ozone generator has the following characteristics: 1. The air dryer can be repeatedly used after heated in a microwave or an oven. 2. Air filters at inlets are included. 3. Dark blue silica beads turn to a pink color when filled with moisture.
Air Dryer Processing Unit For Truck
Air Dryer Processing Unit For Commercial Vehicle