Internal combustion engine oil additive package T3135: diesel eengine oil additive package T3231: multifunctional crankcase oil Kt3542:marine oil additive package It is packed in 200 litre metal drum.
Good compatibility with various base oils. Be used to formulate low-zinc anti-wear hydraulic oil, which has excellent anti-wear, anti-oxidation and excellent anti-emulsification properties, and excellent filtering performance. The hydraulic oil formulated meets the standard of GB111181.1-2011.
Good compatibility with various base oils. Be used to formulate low-zinc anti-wear hydraulic oil, which has excellent anti-wear, anti-oxidation and excellent anti-emulsification properties, and excellent filtering performance. The hydraulic oil formulated meets the standard of GB111181.1-2011.
(1)Introduction and Application The product has excellent performance of thermal oxidation stability, water splitting, anticorrosion and antirust. It is not easy to form oil sludge, paint film and other oxidation products, and it can effectively protect the metal surface of the pump. This product is widely used in reciprocating pump oil, turbocharged pump oil and diffusion vacuum pump oil with excellent performance of vacuum characteristics and extremely low saturated vapor pressure. (2)Dosage Reference The oil modulated by the adding 1.5% of this product and deep refined narrow fraction hydrogenated mineral oil. (3)Quality Index Item Quality Index Test Method Appearance Brown Yellow Transparent Liquid Visual Kinematic Viscosity (40°C) ,mm2/s Report GB/T265 Flash Point (Open),°C â?¥100 GB/T3536 Mechanical Impurities,%(m/m) â?¤0.05 GB/T511 Water,%(m/m) â?¤0.03 GB/T260 (4)Storage According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage. For more details of health and safety precautions, please refer to Material Safety Data Sheet. (5)Packing Net Weight: 180Kg/Iron Drum.
(1)Introduction and Application The oil modulated by this product has excellent performance of the high temperature cleanness, low temperature dispersity, antioxidation and antiwear. On the paraffin base oil of Daqing, the oil of grade 10W/30?10W/40 and 15W/40 can be modulated by adding amount of 4.4 or 5.4% of this product can meet the quality requirement of grade API SE/SF. This product is suitable for engine oil for advanced electric motorcycle of 4-Stroke. (2)Dosage Reference Quality Level Additive Dose (m %) SE 4.4 SF 5.4 (3)Quality Index Item Quality Index Test Method Density (20°C), kg/m3 900-1200 GB/T1884 Kinematic Viscosity (100°C), mm2/s Report GB/T265 Ca, %(m/m) 2.50-3.50 SH/T0297 N, %(m/m) 0.50-0.70 SH/T0224 Zn, %(m/m) 1.60-2.00 SH/T0226 TBN, mg KOH/g90.0 GB/T0251 Flash Point (Open), °C170 GB/T3536 (4)Storage According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage. For more details of health and safety precautions, please refer to Material Safety Data Sheet.. (5)Packing Net Weight: 180Kg/Iron Drum.
(1)Introduction and Application This product is an additive package for the modulation of high grade oil. Engine Oil modulated by this product has an excellent cleanness, dispersity and antioxidation anticorrosion antiwear capacity. It can significantly reduce the deposition of carbon and film of the engine piston, and prolong the oil exchange cycle of the engine. Test data to meet the performance requirements of grade API CI-4/SL in class II/III base oil. The test was carried out in according to the rules of the API base oil exchange. (2)Dosage Reference Quality Level Base Oil Type Viscosity Grade Additive Dose (m %) CI-4/SL A 15W40/10W40/10W30 13.0 CH-4/SL API 15W40/10W40/10W30 11.5 CH-4/SJ API 15W40/10W40/10W30 11.5 CF-4/SL API 15W40/10W40/10W30 7.5 CF-4/SJ API 15W40/10W40/10W30 6.0 (3)Quality Index Item Quality Index Test Method Density (20°C), kg/ m3 Report GB/T1884 Flash Point (Open),°C170 GB/T3536 Kinematic Viscosity (100°C), mm2/s100.0 GB/T265 TBN, mg KOH/g70.0 SH/T0251 P , % (m/m0.70 SH/T0296 N , % (m/m0.50 SH/T0224 Zn, % (m/m0.90 SH/T0226 Ca, % (m/m2.30 GB/T0297 (4)Storage According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage. For more details of health and safety precautions, please refer to Material Safety Data Sheet. (5)Packing Net Weight: 190 Kg/Iron Drum
(1)Introduction and Application DG31654 is kind of high economic performance additive package with the excellent capacity of detergency, dispersibility, anti-oxidant and anti-corrosion, can reduce piston deposits obviously. The engine oil formulated by this product can meet the requirement of API CJ-4 and CI-4. (2)Dosage Reference Quality Level Additive Dose (m %) CJ-4 15 CI-4 13 (3)Quality Index Item Typical data Test Method Flash Point (Open), °C 180 GB/T3536 Kinematic Viscosity (100°C), mm2/s Report GB/T265 Ca, % (m/m) 1.5 SH/T0297 P , % (m/m) 0.64 GB/T0296 Zn, % (m/m) 0.72 SH/T0226 N , % (m/m) 0.52 SH/T0224 Sulphated Ash, % (m/m) 6.5 GB/T2433 TBN, mg KOH/g 49 SH/T0251 (4)Storage According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage. For more details of health and safety precautions, please refer to Material Safety Data Sheet. (5)Packing Net Weight: 195 Kg/Iron Drum .
(1)Introduction and Application DG31654 is kind of high economic performance additive package with the excellent capacity of detergency, dispersibility, anti-oxidant and anti-corrosion, can reduce piston deposits obviously. The engine oil formulated by this product can meet the requirement of API CJ-4 and CI-4. (2)Dosage Reference Quality Level Additive Dose (m %) CJ-4 15 CI-4 13 (3)Quality Index Item Typical data Test Method Flash Point (Open), °C 180 GB/T3536 Kinematic Viscosity (100°C), mm2/s Report GB/T265 Ca, % (m/m) 1.5 SH/T0297 P , % (m/m) 0.64 GB/T0296 Zn, % (m/m) 0.72 SH/T0226 N , % (m/m) 0.52 SH/T0224 Sulphated Ash, % (m/m) 6.5 GB/T2433 TBN, mg KOH/g 49 SH/T0251 (4)Storage According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage. For more details of health and safety precautions, please refer to Material Safety Data Sheet. (5)Packing Net Weight: 195 Kg/Iron Drum .
(1)Introduction and Application The oil modulated by this product has excellent performance of the high temperature cleanness, low temperature dispersity, antioxidation and antiwear. On the paraffin base oil of Daqing, the oil of grade 10W/30ã??10W/40 and 15W/40 can be modulated by adding amount of 4.4 or 5.4% of this product can meet the quality requirement of grade API SE/SF. This product is suitable for engine oil for advanced electric motorcycle of 4-Stroke. (2)Dosage Reference Quality Level Additive Dose (m %) SE 4.4 SF 5.4 (3)Quality Index Item Quality Index Test Method Density (20°C), kg/m3 900-1200 GB/T1884 Kinematic Viscosity (100°C), mm2/s Report GB/T265 Ca, %(m/m) 2.50-3.50 SH/T0297 N, %(m/m) 0.50-0.70 SH/T0224 Zn, %(m/m) 1.60-2.00 SH/T0226 TBN, mg KOH/g â?¥90.0 GB/T0251 Flash Point (Open), °C â?¥170 GB/T3536 (4)Storage According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage. For more details of health and safety precautions, please refer to Material Safety Data Sheet.. (5)Packing Net Weight: 180Kg/Iron Drum.
Diesel Engine Oil Additive Package DG31654 (1)Introduction and Application DG31654 is kind of high economic performance additive package with the excellent capacity of detergency, dispersibility, anti-oxidant and anti-corrosion, can reduce piston deposits obviously. The engine oil formulated by this product can meet the requirement of API CJ-4 and CI-4. (2)Dosage Reference Quality Level Additive Dose (m %) CJ-4 15 CI-4 13 (3)Quality Index Item Typical data Test Method Flash Point (Open), °C 180 GB/T3536 Kinematic Viscosity (100°C), mm2/s Report GB/T265 Ca, % (m/m) 1.5 SH/T0297 P , % (m/m) 0.64 GB/T0296 Zn, % (m/m) 0.72 SH/T0226 N , % (m/m) 0.52 SH/T0224 Sulphated Ash, % (m/m) 6.5 GB/T2433 TBN, mg KOH/g 49 SH/T0251 (4)Storage According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage. For more details of health and safety precautions, please refer to Material Safety Data Sheet. (5)Packing Net Weight: 195 Kg/Iron Drum
(1)Introduction and Application This product is an additive package for the modulation of high grade oil. Engine Oil modulated by this product has an excellent cleanness, dispersity and antioxidation anticorrosion antiwear capacity. It can significantly reduce the deposition of carbon and film of the engine piston, and prolong the oil exchange cycle of the engine. Test data to meet the performance requirements of grade API CI-4/SL in class II/III base oil. The test was carried out in according to the rules of the API base oil exchange. (2)Dosage Reference Quality Level Base Oil Type Viscosity Grade Additive Dose (m %) CI-4/SL API �/� 15W40/10W40/10W30 13.0 CH-4/SL API 15W40/10W40/10W30 11.5 CH-4/SJ API 15W40/10W40/10W30 11.5 CF-4/SL API 15W40/10W40/10W30 7.5 CF-4/SJ API 15W40/10W40/10W30 6.0 (3)Quality Index Item Quality Index Test Method Density (20°C), kg/ m3 Report GB/T1884 Flash Point (Open),°C �170 GB/T3536 Kinematic Viscosity (100°C), mm2/s �100.0 GB/T265 TBN, mg KOH/g �70.0 SH/T0251 P , % (m/m) �0.70 SH/T0296 N , % (m/m) �0.50 SH/T0224 Zn, % (m/m) �0.90 SH/T0226 Ca, % (m/m) �2.30 GB/T0297 (4)Storage According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage. For more details of health and safety precautions, please refer to Material Safety Data Sheet. (5)Packing Net Weight: 190 Kg/Iron Drum
Heavy Duty Turbine Oil Additive Package Product Introduction XP6001A is a kind of ash-less compound additive developed for steam turbine equipment or turbine oil. It is blended by antioxidant, antiwear agent and other additive . It can be used to blend all viscosity grade L-TSA Turbine oil, and it meets the specifications of ISO8068: 2006 . By increasing dosage it can be used to blend extreme pressure turbine oil, and it's also suitable for teh lubrication of steam turbine, gas turbine, combined steam turbine . Its excellent wear resistance can meet the requirements of the turbine oil use procedure . Reference dosage Item Recommend Dosage Oil type and dosage L-TSA turbine oil :0.5%(m) Extreme pressure turbine oil :0.8-1.2%(m) P-38,P-55,USS126,P57 General Electric oils :0.6%(m) Base oil API Group I,II,III base oil ,blend oil is not recommended Other additive Anti-foam additive can be used , generally not using demulsifier Blending temperature 65 Specification Item Typical Value Appearance Orange transparent liquid Density, 20 g/cm3 Report Flash point(COC ), >130 Kinematic Viscosity( 40 ),mm2/s Report
API SL Gasoline Engine Oil Additive Package XP6162 is formulated with a variety of additives such as superior detergent,  dispersant, antioxidant/corrosion inhibitor etc. The SAE 5W/40, 5W/30, 10W/40 gasoline engine oil prepared from XP6162 passed IVA, IIIF, VG,VIII, VIB and other engine bench test, RF6162 meet API SL gasoline engine oil performance requirements. Technical Index Recommended Dosage of API SL Gasoline Engine Oil Additive Package API Performance Level SAE Viscosity Grade Treating Rate(m%) SL 5W/40,5W/30,10W/40 7.6% Technical Index of API SL Gasoline Engine Oil Additive Package Item Typical Value Appearance Brown Viscous Liquid Total Base Number,mgKOH/g 91 Flash Point(COC), 190 Kinematic Viscosity(100),mm2/s 135 N Content,m% 1.4 Density(20),kg/m 986 Ca Content,m% 2.6 Zn Content,m% 1.0 P Content,m% 0.9 Mo Content,m% 0.03
RD5012A Additive Package for Anti-wear Hydraulic Fluid 1. DESCRIPTION RD5012A is formulated with anti-wear agent, antioxidant and metal deactivator. The hydraulic fluid blended with RD5012A possesses good antioxidant, anti-rusting and excellent anti-wear properties. It can prevent hydraulic pump and other components from wearing and tearing, prolong the service life of machine. 2.DOSAGE Viscosity grade Dosage(W%) 15, 22, 32 0.65-0.7 46,68,100,150 0.65-0.7 3. CHARACTERISTICS ITEM TYPICAL DATA TEST METHOD Appearance Light brown liquid Visual Flash point (open cup) ??, min 145 GB/T3536 Kinematics Viscosity (100°C), mm2/s 5.6 GB/T 265 Zinc, m% 4.0 SH/T0226 Sulfur ,m% 7 SH/T0303 Phosphorus, m% 3.5 SH/T0296 4. PACKING AND STORAGE The packing, marking, transportation, storage and delivery acceptance should meet the requirements of SH/T0164. It is packed in 200 liter metal drum. Store in dry, clean and ventilating warehouses.
RD5596 2-Stroke Gasoline Engine Oil Additive Package FB, FC, FDAfton 2235 1.DESCRIPTION RD5596 has been developed to formulate two-stroke gasoline engine oils. RD5596 is formulated with excellent detergent, dispersant and other additives. So the engine oils formulated with RD5596 have outstanding detergency and lubricative, low ash and antirust performance, etc. The following performance levels can be achieved with oils formulated with RD5596. 2.THE RECOMMENDED DOSAGE PERFORMANCE LEVEL DOSAGE (wt%) FB 2.5 FC 4.1 FD 6.2 3.CHARACTERISTICS ITEM TYPICAL VALUE TEST METHOD Flash point (COC) °C 180 GB/T 3536 Kinematic Viscosity (100°C), mm2/s Report GB/T 265 Calcium, wt% 0.76 SH/T 0270 Nitrogen, wt% 0.85 SH/T 0224 TBN,mgKOH 24 SH/T 0251 Sulphated ash 2.6 4.PACKING AND STORAGE The packing, marking, transportation, storage and delivery acceptance should meet the requirements of SH/T0164. It is packed in 200 liter metal drum. Store in dry, clean and ventilating warehouses.
T3269 universal engine oil additive package has good dispersancy and anti-oxidation property which is composed of synthetic sulphonate, ashless dispersant, anti-oxidant and corrosion inhibitor. T3269 meets api performance categories through sl/ci-4 to cf-4. The reference dosage is 11.0%- 7.0%.
RD3133 Additive Package For Engine Oil CD/CF,CC/SC,CB/SB, CC/SD ,CD/SF 1.DESCRIPTION RD3133 is dark brown viscous liquid prepared form varieties of additives,such as excellent detergent, dispersant, antioxidant and corrosion inhibitor and anti-wear agent. The recommended treat meet the following classification and specification requirements. 2. THE RECOMMENDED DOSAGE API Multi/Mono Treating Rate(wt%) CD/CF Multi 6.0 CD/CF Mono 5.5 CC/SC Multi 3.0 CC/SC Mono 2.8 CB/SB Mono 2 CD/SF Multi 4.5 CC/SD Multi 3.8 3. CHARACTERISTICS Item Typical Value Test Method Density (20°C), kg/m3 Report GB/T 1884 Flash point (COC) °C 170 GB/T 3536 Kinematic Viscosity (100°C), mm2/s Report GB/T 265 Calcium, wt% 6.0 SH/T 0270 Zinc, wt% 1.6 SH/T 0226 Phosphorus, wt% min 1.2 SH/T 0296 TBN, mg KOH/g 180 SH/T 0251 4.PACKING AND STORAGE The packing, marking, transportation, storage and delivery acceptance should meet the requirements of SH/T0164. It is packed in 200 liter metal drum. Store in dry, clean and ventilating warehouses.
Recommended for use at: 0.85 % by weight 0.75 % by volume In suitable base stocks to prepare antiwear hydraulic oils. Parker hannifin france (denison) hf-0 Eaton vickers i-286-s Eaton vickers m-2950-s Cincinnati machine p-70 Cincinnati machine p-68
Cardboard boxes, pizza boxes, fruit boxes, corrugated cardboard boxes, corrugated cardboard.