Polyquaternium-51 INCI Name: POLYQUATERNIUM-51 Molecular Formula: C19H36NO8P Molecular Weight: 437.47 Appearance: Colorless transparent liquid Purity: 98% CAS NO.: 125275-25-4 EINECS No.: 433-120-0 Application: cosmetics and skin care products Supplier: ZHENYIBIO Polyquaternium-51 (Polyquaternium-51) chemical name: methacryloxyethyl phosphorylcholine-n-butyl methacrylate, is a synthetic bionic material of cell membrane structure, with phospholipids in the cell membrane The polar group of acylcholine is a copolymer composed of 2-methacryloyl hydroxyethyl phosphatidylcholine (MPC) and monomeric hydrophobic butyl methacrylate. Polyquaternium-51 has super moisturizing properties, its moisturizing properties are twice that of hyaluronic acid, and can alleviate the irritation of surfactants, so it is widely used in cosmetic moisturizer raw materials and medical aesthetics. Polyquaternium-51 is an efficient and mild moisturizing factor with excellent water-locking and moisturizing properties. It can effectively lock the moisture of the skin and hair, and its moisturizing properties will not be reduced after multiple washings. After the product containing polyquaternium-51 is applied, its ingredients can form a respirable biofilm on the surface of the skin, which simulates the stratum corneum to give the skin an extra layer of protection, effectively inhibits the irritation of surfactants on the skin, and can Improve rough skin, smooth and delicate skin, and enhance the skin's absorption of active ingredients.
430 Stainless Steel Strip Specifications Grade: 430 Standard: ASTM/EN/JIS Thickness: 0.03mm-5.0 mm Width: 8.5mm-600 mm Length: coil type or it can be produced as customer requirements Surface Finish: NO.1, 2B, 2H(Rerolled Bright), BA, No.4, 8K (Mirror), HL (Hairline), Polishing Bright, etc Edge: Mill Edge, Slit Edge, Deburred Edge, Round Edge, V Type Edge 430 Stainless Steel Strip Introductions 430 stainless steel strip is a general purpose stainless steel with good corrosion resistance. It has better thermal conductivity than austenite grade stainless steel strip, a smaller thermal expansion coefficient than austenite strip, heat fatigue resistance. Due to addition of stabilizing element titanium, it has good mechanical properties of welding. Because of its chromium content, it is also called 18/0 or 18-0. Compared with 18/8 and 18/10, it contains slightly less chromium, and the hardness is correspondingly lower. 430 Stainless Steel Strip Applications 430 stainless steel strip is widely used for building decoration, fuel heating parts, hot water supply systems, household appliances, banding systems, home appliance parts and hareware. 430 Stainless Steel Strip Chemical Composition The chemical components of grade 430 stainless steel strip is summarized in the following table: Grade Standard C Si Mn P S Cr Ni Mo 430 ASTM A240 0.12 0.75 1.00 0.040 0.030 16.00-18.00 0.75
Sodium gluconate is the sodium salt obtained from gluconic acid. Sodium gluconate is a first-class sequestering agent as it combines excellent stabilizing and chelating properties, particularly under extreme conditions (high alkalinity, high temperatures), with remarkable biodegradability qualities. Sr Test Specification 1 Appearance White Free flowing powder - slightly crystal 2 pH 10 % Solution in water 6.0 to 8.0 3 Purity Min. 98.0 4 Appearance of 10 % Solution in water Clear Solution 5 Moisture Content Max 1.0 Application â?? Surface treatment of metals: removes grease from metals, gives aluminium a satin finish. Adjuvants for concretes where it is used as a slump retention agent. Industrial detergency: cleaning bottles, industrial plant, etc. Excellent Textile Dying. As a chelating agent for cement, plating and alumina dyeing industries. It is used in bar soap products, toothpaste products, depilatory products, shampoos, body wash/cleanser products, liquid hand soap products, foundation products, mascara products, concealers, hair color and bleaching products, sunscreens, skin fading/lightener products, moisturizers, anti-aging products, foams, conditioners, toners, astringents, creams, hair sprays, shampoos, exfoliants, and scrubs.
Our Powder activated carbon is manufactured using pure pine wood which is an excellent base for manufacturing activated carbons with good adsorption power. The steam activated process is done by activating the charcoal in a rotary kiln by heating at high temperatures by steam. The activated carbon that comes out from the kiln is called unwashed activated carbon. These unwashed activated carbon has higher ash and iron content. This is reduced by washing the unwashed activated carbon with acid (HCl / H2SO4) and purified water. This results in reduction of ash content to as low as 1% and iron as low as 50 ppm. The gradation of different qualities of activated carbon is done on the basis of Methylene blue value and iodine value. The iodine value is a better test as the particle size of iodine molecule is small enough to penetrate the smallest of pores. We can relate the iodine value of activated carbon directly to its surface area because of the above fact.
Silica sand is a primary component in the manufacturing of glass. It is a very important raw material for standard and special glasses. The chemical purity of silica sand is the principal determinant of strength, colour and clarity. It is used to produce flat glass for building and automotive uses and for container glass that stores food and beverages. It reinforces glass fibres and required for the production of fibreglass insulation. It is applied in speciality glasses that include test tubes, scientific tools, television and CRT monitors, and also in incandescent and fluorescent lamps. Calcium silicate bricks For manufacturing calcium silicate bricks, silica sand is mixed with high calcium lime with a sand to lime ratio of 10 or 20. These bricks contain good regularity, smooth faces, and sharp corners with a wide variety of strength. The durability of calcium silicate bricks is similar to concrete and is not resistant to sulphur containing environments. Silica sand for water filtration Silica sand is an effetive filtration bed in the removal of contaminants in both processing of wastewater and in the filtration of the drinking water. Silica sand neutralizes the acidic elements to maintain optimal pH balance in water filters. As it is chemically inert, it will not react when exposed to acids, contaminants, volatile organics or solvents. Metal Casting & Production Silica sand is an essential part of the production of steel, ferrous and nonferrous foundry industries for de-oxidation and grain refinement. For obtaining desired internal or external shapes, metal parts are cast in silica sand. It is a preferred choice for castings that involve cast iron, steel, titanium and also used to clean the casting surfaces. Paints & Coatings Silica sand constitutes of high-performance properties such as brightness, reflectance, oil absorption and colour-consistency. These properties help to improve the overall appearance and durability of industrial and architectural paints and coatings. Its low oil absorption nature improves finishing colour that makes a durable coating rich in pigments. Silica fillers improvement retention and also provide resistance to dirt, mildew, weathering and cracking
Material: Pure Titanium, Titanium alloy Grade: Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 etc. Size: Diameter: 0.1~7mm * L. Standard: ASTM B863, AWS A5.16, ASTM F67, ASTM F136 etc. Shape: Straight or in coil. Status: Annealed(M). Technology: Hot rolling, Stretching. Surface: Pickled or polished. Application: Titanium wire is widely used for welding, surgical implants, decoration, electroplating hanging fixture. Also used in the production of spherical titanium powder.
Material: Pure Titanium, Titanium alloy Grade: Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 etc. Size: Diameter: 0.1~7mm * L. Standard: ASTM B863, AWS A5.16, ASTM F67, ASTM F136 etc. Shape: Straight or in coil. Status: Annealed(M). Technology: Hot rolling, Stretching. Surface: Pickled or polished. Application: Titanium wire is widely used for welding, surgical implants, decoration, electroplating hanging fixture. Also used in the production of spherical titanium powder.
Material: Pure Titanium, Titanium alloy Grade: Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 etc. Size: Diameter: 0.1~7mm * L. Standard: ASTM B863, AWS A5.16, ASTM F67, ASTM F136 etc. Shape: Straight or in coil. Status: Annealed(M). Technology: Hot rolling, Stretching. Surface: Pickled or polished. Application: Titanium wire is widely used for welding, surgical implants, decoration, electroplating hanging fixture. Also used in the production of spherical titanium powder.
Material: Pure Titanium, Titanium alloy Grade: Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 etc. Size: Diameter: 0.1~7mm * L. Standard: ASTM B863, AWS A5.16, ASTM F67, ASTM F136 etc. Shape: Straight or in coil. Status: Annealed(M). Technology: Hot rolling, Stretching. Surface: Pickled or polished. Application: Titanium wire is widely used for welding, surgical implants, decoration, electroplating hanging fixture. Also used in the production of spherical titanium powder.
Material: Pure Titanium, Titanium alloy Grade: Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 etc. Size: Diameter: 0.1~7mm * L. Standard: ASTM B863, AWS A5.16, ASTM F67, ASTM F136 etc. Shape: Straight or in coil. Status: Annealed(M). Technology: Hot rolling, Stretching. Surface: Pickled or polished. Application: Titanium wire is widely used for welding, surgical implants, decoration, electroplating hanging fixture. Also used in the production of spherical titanium powder.
Virgin coconut oil is made from fresh coconut meat. The production embraces the removal of the bark, the elimination of the brown shell and washing. Then the white meat gets grounded (to obtain fine flakes) and dried. After drying the white meat goes true a screw press to extract the oil. The oil gets filtered afterwards to result in a clear oil. Ingredients Organic cold pressed coconut oil. COCONUT OIL, 100% natural, is a refined vegetable oil extracted from the dried coconut flesh of Cocos Nucifera (Coconut). COCONUT OIL is one of the vegetable oils that accumulate high levels of saturated fatty acids in the triacylglycerol fraction. COCONUT OIL contains approximately 50% of Lauric acid (saturated C12 chain). COCONUT OIL provides emollient properties and is great for moisturizing, that make it useful to be used in all cosmetic formulations. COCONUT OIL is specially indicated for lipstick, make up and soap makers. The saturated nature of COCONUT OIL provides resistance to rancidity and makes a very hard soap while at the same time producing a fluffy lather. Many cultures use coconut oil straight on their hair and skin for conditioning. PHYSICAL & CHEMICAL STANDARDS Colour 25mm cell on the lovibond colour Scale in Y+5R , not deeper than (0.9 Y+0.1R) Relative Density at 30 0C 0.920 Relative Index at 40 0C ND Moisture %( matter volatile at 105 0 C,max) 0.1 Insoluble Impurities % by mass,max < 0.02 Free fatty Acids,calculated as lauric acid % bymass,max 0.04 Iodine Value 6.4 Saponification Value >255 Unsaponifiable Matter % by mass,max
Cow milk, cream from cow's milk. The main stages of the process Qualitative assessment of milk, milk reception, cleaning and cooling of milk, milk reservations, separation of milk, pasteurization of cream received, cooling of cream, physical maturation cream, whipping of cream, obtaining of butter, packaging of butter, marking of butter, storage. The final product characteristics Taste and smell: clean, well expressed taste of pasteurized cream. Consistency and Appearance: homogeneous, plastic, dense, shiny surface on the cut or slightly shiny, dry. Color: from light yellow to yellow, homogeneous for all mass. Basic physical, and chemical, characteristics -fat content 82.5 %; -moisture, Max 16 % -acidity (plasma), max - 23 ; -acidity (fat phase), max - 2,5. Microbiological indicators: - quantity of mesophilic aerobic and facultative anaerobic microorganisms (QMAFAnM), colony-forming units (CFU), in 1g of the product, no more 1,0*105; - coliform bacteria (koliformy) in 1g of the product - not allowed; - pathogenic microorganisms, including bacteria of Salmonella in 25g of the product - not allowed; - staphylococcus aureus, CFU in 1g of the product - not allowed; - listeria monocytogenes in 25g of the product not allowed; - mold, yeast, CFU, in 1g, no more 100 in sum; The content of toxic elements: - lead no more 0,1 mg/kg; - cadmium no more 0,03 mg/kg; - arsenic no more 0,1 mg/kg; - mercury no more 0,03 mg/kg; - copper no more 0,5 mg/kg, - zinc no more - 5,0 mg/kg; - iron no more 5,0 mg/kg. Weight: net 25,0 kg, gross 25,55 kg Term of storage: 3 months at 0...-5 9 months at -6...-11 12 months at -12...-18
Dia 2x400mm GR1 Titanium Straight Wire For Industry is a high-quality product with a small diameter available in various forms, including spools, cut TIG rod lengths, or full bars. Widely utilized in chemical processing and anodizing applications, this titanium wire is ideal for hanging or securing parts with its exceptional properties. Dia 2x400mm GR1 Titanium Straight Wire For Industry offers outstanding corrosion resistance, making it highly reliable in harsh chemical environments. Whether for suspension purposes or securing components, this wire withstands the most demanding challenges. It can be conveniently cut and customized to desired lengths, ensuring a perfect fit for specific applications. Moreover, it is available in common welding rod sizes, providing added convenience for TIG welding projects. Parameter Material: GR1 titanium Diameter: 2mm Length: 400mm Processing: Drawing Process Features Corrosion Resistance: The GR1 titanium composition provides outstanding resistance to corrosion, making it highly suitable for use in harsh chemical environments. This ensures long-lasting performance and durability. Versatile Customization: The titanium straight wire can be easily cut and customized to meet specific requirements. Whether you need it in TIG rod lengths or as full bars, our product offers flexible options for different applications. Reliable Strength: With carefully controlled manufacturing processes, our titanium wire maintains a perfect balance of strength and flexibility. It can withstand high temperatures and pressures, ensuring stability and reliability in demanding industrial settings. Wide Application Range: Our Dia 2x400mm GR1 Titanium Straight Wire finds extensive use in chemical processing, anodizing, and welding applications. Its versatility and exceptional properties make it suitable for a diverse range of industries. High-Quality Standards: Our product adheres to rigorous quality control measures, ensuring that it meets or exceeds industry standards. We prioritize delivering a product that consistently meets customer expectations.
Baoji Create Metal Co., Ltd We mainly manufacture titanium & its alloy products for industry, medical, & aerospace, nickel & its alloy products, and zirconium & its alloy products. Titanium, Nickel, Zirconium & it's alloy round bars/rods, sheets/plates, wires, tubes, forgings, standard parts and non-standard parts. Products manufacture range: Titanium bar: Product: Forged rods bars / Rolled rods bars Size Condition: Dia(30~400)xL
Dia 2x400mm GR1 Titanium Straight Wire For Industry is a high-quality product with a small diameter available in various forms, including spools, cut TIG rod lengths, or full bars. Widely utilized in chemical processing and anodizing applications, this titanium wire is ideal for hanging or securing parts with its exceptional properties. Parameter Material: GR1 titanium Diameter: 2mm Length: 400mm Processing: Drawing Process Features Corrosion Resistance: The GR1 titanium composition provides outstanding resistance to corrosion, making it highly suitable for use in harsh chemical environments. This ensures long-lasting performance and durability. Versatile Customization: The titanium straight wire can be easily cut and customized to meet specific requirements. Whether you need it in TIG rod lengths or as full bars, our product offers flexible options for different applications. Reliable Strength: With carefully controlled manufacturing processes, our titanium wire maintains a perfect balance of strength and flexibility. It can withstand high temperatures and pressures, ensuring stability and reliability in demanding industrial settings. Wide Application Range: Our Dia 2x400mm GR1 Titanium Straight Wire finds extensive use in chemical processing, anodizing, and welding applications. Its versatility and exceptional properties make it suitable for a diverse range of industries. High-Quality Standards: Our product adheres to rigorous quality control measures, ensuring that it meets or exceeds industry standards. We prioritize delivering a product that consistently meets customer expectations. Processing Manufacturing Process of Dia 2x400mm GR1 Titanium Straight Wire For Industry: At TOPTITECH, we employ advanced manufacturing processes to ensure the high quality and reliability of our Dia 2x400mm GR1 Titanium Straight Wire. Material Selection: We carefully choose premium-grade GR1 titanium as the base material for producing the titanium straight wire. These materials undergo melting and refining processes to ensure purity and consistency. Drawing Process: Our production process involves state-of-the-art drawing techniques. The titanium raw material is heated to the appropriate temperature and gradually drawn through a die to form a fine wire. By controlling the tension and temperature, we ensure that the resulting titanium wire meets the required specifications in terms of diameter and length. Cutting and Customization: The titanium straight wire can be cut and customized according to the specific needs of our customers. We can provide it in TIG rod lengths or as full bars, tailored to different application requirements.
Material: Pure Titanium, Titanium alloy Grade: Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 etc. Size: Diameter: 0.1~7mm * L. Standard: ASTM B863, AWS A5.16, ASTM F67, ASTM F136 etc. Shape: Straight or in coil. Status: Annealed(M). Technology: Hot rolling, Stretching. Surface: Pickled or polished. Application: Titanium wire is widely used for welding, surgical implants, decoration, electroplating hanging fixture. Also used in the production of spherical titanium powder.
Material: Pure Titanium, Titanium alloy Grade: Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 etc. Size: Diameter: 0.1~7mm * L. Standard: ASTM B863, AWS A5.16, ASTM F67, ASTM F136 etc. Shape: Straight or in coil. Status: Annealed(M). Technology: Hot rolling, Stretching. Surface: Pickled or polished. Application: Titanium wire is widely used for welding, surgical implants, decoration, electroplating hanging fixture. Also used in the production of spherical titanium powder.
Material: Pure Titanium, Titanium alloy Grade: Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 etc. Size: Diameter: 0.1~7mm * L. Standard: ASTM B863, AWS A5.16, ASTM F67, ASTM F136 etc. Shape: Straight or in coil. Status: Annealed(M). Technology: Hot rolling, Stretching. Surface: Pickled or polished. Application: Titanium wire is widely used for welding, surgical implants, decoration, electroplating hanging fixture. Also used in the production of spherical titanium powder.
Material: Pure Titanium, Titanium alloy Grade: Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 etc. Size: Diameter: 0.1~7mm * L. Standard: ASTM B863, AWS A5.16, ASTM F67, ASTM F136 etc. Shape: Straight or in coil. Status: Annealed(M). Technology: Hot rolling, Stretching. Surface: Pickled or polished. Application: Titanium wire is widely used for welding, surgical implants, decoration, electroplating hanging fixture. Also used in the production of spherical titanium powder.
Material: Pure Titanium, Titanium alloy Grade: Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 etc. Size: Diameter: 0.1~7mm * L. Standard: ASTM B863, AWS A5.16, ASTM F67, ASTM F136 etc. Shape: Straight or in coil. Status: Annealed(M). Technology: Hot rolling, Stretching. Surface: Pickled or polished. Application: Titanium wire is widely used for welding, surgical implants, decoration, electroplating hanging fixture. Also used in the production of spherical titanium powder.
