Wet wipes 75% alcohol antibacterial hand sanitizing cleaning wet wipes. PREMIUM QUALITY INGREDIENTS: These hand wipes are made with 75% pharmaceutical grade ethyl alcohol. The finished product meets the FDA requirements for drug products. They are Unscented and do not contain any added fragrance. SOFT AND DURABLE MATERIAL: Made of Premium 45GSM non-woven fabric, soft & wear-resistant. Safe to use on skin, the size is 15 x 20cm large size for greater coverage. RESEALABLE PACKAGE: Keeps hand sanitizing wipes moist and fresh. ACTIVE INGREDIENT: 75% Ethyl Alcohol made from corn Packaged in a soft pack easy dispenser, 50 wipes per package.
Good Quality Hot Sale SMS Disposable medical Lab coats MEDICAL NATION Lab Coats for All-� This unisex lab coat comes in multiple sizes and is the perfect lab coat women and men can wear in a variety of settings including hospitals, laboratories and more. Comfort and Function- easy to put on, breathable and lightweight, and features a soft knitted collar and cuffs and 3 convenient pockets to combine comfort and function for more efficient use. Durable Design- With strong snap closures, elastic bands for tight cuff closure, and anti-static material, SMS Premium Protection- made of 3-layers of nonwoven SMS fabric that is highly fluid resistant while maintaining comfort. A premium-protected lab coat men and women can feel good about.
wet wipes 75% alcohol antibacterial hand sanitizing cleaning wet wipes PREMIUM QUALITY INGREDIENTS: These� hand wipes are made with 75% pharmaceutical grade ethyl alcohol. The finished product meets the FDA requirements for drug products. They are Unscented and do not contain any added fragrance. SOFT AND DURABLE MATERIAL: Made of Premium 45GSM non-woven fabric, soft & wear-resistant. Safe to use on skin, the size is 15 x 20cm large size for greater coverage. RESEALABLE PACKAGE: Keeps hand sanitizing wipes moist and fresh. ACTIVE INGREDIENT: 75% Ethyl Alcohol made from corn Packaged in a soft pack easy dispenser, 50 wipes per package.
Water Resistance: Taslon fabric, often polyester, has good water resistance, ideal for outdoor activities. Abrasion Resistance: Made of durable synthetic fibers, Taslon fabric resists abrasion, suitable for frequent wear. Wrinkle Resistance: Taslon fabric is wrinkle-resistant, maintaining garment neatness without frequent ironing. Breathability: Despite its water resistance, Taslon fabric typically offers breathability for comfort. Quick Drying: Thanks to polyester's properties, Taslon fabric dries quickly after washing, facilitating easy care. Material Composition: Taslon fabric is usually composed of polyester fibers.
Basalt Fiber Series Fabric 1. Production: basalt fiber fabric is made of continuous basalt fiber textile yarn through warping, weaving and coating. 2. Weaving methods according to requirements: unidirectional cloth, plain cloth, twill cloth and grid cloth. 2. Application: reinforced mesh cloth, fireproof cloth, fishing rod cloth, luggage decoration cloth, electrical insulation cloth, bulletproof cloth, etc. 3. Packaging: 100M / roll (or customized as required). 4. Performance: high strength, high temperature resistance, good electrical insulation, non hygroscopic, acid and alkali corrosion resistance.High temperature resistance 1000 �° C 5. Specification and model: bfw16 * 20-100 (120) BFW: basalt fiber fabric;Completely replace carbon fiber sheet building reinforcement 16 * 20: the warp and weft density of yarn is 16 and 20 pieces / cm respectively; 100: the width of the fabric is 100 cm; (120): the mass per unit area of fabric is 120 g / m2. BFNP5*5-200(160) BFNP: basalt fiber mesh cloth (coated and shaped); 5 * 5: the longitude and latitude mesh size of the cloth surface is 5 and 5mm; 200: the width of the grid is 200 cm; (160): the weight of grid cloth per unit area is 160g / m2.
Inflatable stand up paddle board descreption: 320x78x15cm Adult inflatable SUP, surf paddle board for water sport with accessories Specification detail: Brand: seaskating or OEM Model: SUP-320cm Size: 320*78*15cm Net Weight: 16 kg Max Barometric value: : 25 PSI Displacement: 310 L Bearing Weight: 300IBS / 135kg Packing size: 89x55x19cm Product Accessories: 1xHigh-pressure inflatable hand Pump 1xStorage Bag1xFin System 1xRepair kits 1xAdjustable Aluminum Paddle Features: Light weight. Fordable design, convenient to carry and keep. Easy inflate and Deflate. Large non-slip walk able pad. Import the materials and accessories, ensure have good quality, we provide 3 years warranty. Body Construction: Drop Stitch Material, Reinforced layer: PVC coated fabric. Anti Skip Pad: Super soft EVA, UV resistant. Skilled worker more than 4 years experience.
Inflatable stand up paddle board descreption: 320x78x15cm Adult inflatable SUP, surf paddle board for water sport with accessories Specification detail: Brand: seaskating or OEM Model: SUP-320cm Size: 320*78*15cm Net Weight: 16 kg Max Barometric value: : 25 PSI Displacement: 310 L Bearing Weight: 300IBS / 135kg Packing size: 89x55x19cm Product Accessories: 1xHigh-pressure inflatable hand Pump 1xStorage Bag1xFin System 1xRepair kits 1xAdjustable Aluminum Paddle Features: Light weight. Fordable design, convenient to carry and keep. Easy inflate and Deflate. Large non-slip walk able pad. Import the materials and accessories, ensure have good quality, we provide 3 years warranty. Body Construction: Drop Stitch Material, Reinforced layer: PVC coated fabric. Anti Skip Pad: Super soft EVA, UV resistant. Skilled worker more than 4 years experience.
380x78x15cm/ 12 5x31 x6 for adults, Inflatable Stand Up Paddle Board, iSUP, water craft for the sport of Stand Up Paddling with beginner's set Specification detail: Brand: seaskating Model: SUP-12â??5â??â??/380cm Size: 380*78*15cm /12â??5â??â??â??x31â??â??x6â??â?? Net Weight: 18 kg Barometric value: :15 to 25 PSI Displacement: 380 L Bearing Weight: 377IBS / 170kg Packing size: 89x55x19cm Product Accessories: 1xHigh-pressure inflatable hand Pump 1xStorage Bag 1xFin System 1xRepair kits 1xAdjustable Aluminum Paddle Features: Light weight. Fordable design, convenient to carry and keep. Easy inflate and Deflate. Large non-slip walk able pad. Import the materials and accessories, ensure have good quality, we provide 3 years warranty. Body Construction: Drop Stitch Material, Reinforced layer: PVC coated fabric. Anti Skip Pad: Super soft EVA, UV resistant. Skilled worker more than 4 years experience.
Inflatable stand up paddle board descreption: 320x78x15cm Adult inflatable SUP, surf paddle board for water sport with accessories Specification detail: Brand: seaskating or OEM Model: SUP-10â??6â??â??/320cm Size: 320*78*15cm /10â??6â??â??â??x31â??â??x6â??â?? Net Weight: 16~20kg Max Barometric value: : 25 PSI Displacement: 310 L Bearing Weight: 300IBS / 135kg Packing size: 89x55x19cm Product Accessories: 1xHigh-pressure inflatable hand Pump 1xStorage Bag 1xFin System 1xRepair kits 1xAdjustable Aluminum Paddle Min order 20pcs Features: Light weight. Fordable design, convenient to carry and keep. Easy inflate and Deflate. Large non-slip walk able pad. Import the materials and accessories, ensure have good quality, we provide 3 years warranty. Body Construction: Drop Stitch Material, Reinforced layer: PVC coated fabric. Anti Skip Pad: Super soft EVA, UV resistant. Skilled worker more than 4 years experience. We are Original manufacturer for more then 10 years experience of all kinds of water sport boat, stand up paddle board, paddle boat, RIB boat, Fiberglass boat, fishing boat, speed boat, rescue boat...we can customized the size, color, design and logo for you. Please contact us.
Sunshine Beach Tent outdoor Tent Ultralight Folding waterproof Pop Up Automatic Open Tourist Fish Camping UV-protective Sun Shad Sunshine Beach Tent outdoor Tent Ultralight Folding waterproof Pop Up Automatic Open Tourist Fish Camping UV-protective Sun Shade Tent Specification: Fabric: Polyester fiber Open way: Quick automatic opening Tent weight: 1kg Size:165*150*110cm Folding Size: 45 * 8cm Package Includes: 1 x Tent, 6 x steel Ground Stakes Features: Automatically open: one second quick opening without building, simple and convenient, no assembly required. Capacity: Can accommodate up to 3-4 people, very suitable for couples, can provide a lot of storage space for your camping equipment. Easy to install and free to place: Equipped with a full-size carrying bag with shoulder strap for easy carrying and store. 50+ UPF:The flame resistant nylon fabricaround the coverage has a UV rating of 50+ UPF to protect you and your family from the sun's harmful rays. Come in a convenient handled carry bag for compact storage and easy transport. Tent pegs and pouches for holding sand for fixing under windy conditions. Special silver coated 170T polyester fabric, water-resistant and UV-resistant. Durable, useful tent for fishing, picnic or having beach fun. Application: The first choice for parks, beaches, hiking, adventure, fishing, kayaking, car camping, backpacking or cycling.
Grinding, blasting, and cutting processes, as well as the production of refractory materials, all employ alumina. We are proud to be the world's largest fused alumina producer and supplier. It is also known as fused aluminium oxide Alumina is found in the regions of Odisha, West Bengal, Kerala, Uttar Pradesh, Maharashtra and Tamil Nadu. There are several physical properties of alumina. It is high in hardness with the value of 9 on Mohs scale. It has sharp-edged grains, a high load bearing capacity, strong shock resistance, and thermal and chemical stability, besides their superior hardness. Alumina, or aluminium oxide (aluminum oxide), is better known in the mineral world as corundum with the chemical formula Al2O3 Alumina has widespread usage in several industries in refractories, sandblasting and abrasives to mention a few. Grinding, machining, blasting, cutting, and the manufacturing of shaped and unshaped refractory materials all employ fused aluminium oxide grits. We offer innovative, brilliant quality alumina mineral with both macro and micro sized that could be used for a wide range of applications. We can add refining procedures to our regular production of alumina mineral to suit the bespoke requirements of various industries and application domains. These various industries are ceramics, sand casting, tiles, enamels, laminates & paints, industrial coatings, abrasives, blasting, concrete & resin components, refractories, insulators and heat conductive to name a few.
Items Method ZD500C3 Grease Type Lithium Grease Color Yellow or Blue Texture Smooth and transparent NLGI 3#Thickener Type Lithium base-12-hydroxy Thickener Content 13%-15% Penetration Worked 60 GB/T 269 240-250 Dropping point min GB/T 4929 135-140 Copper Corrosion GB/T 7326 pass Base Fluid Properties Base Fluid Type Mineral Viscosity @40 cst GB/T 265 185 Viscosity @100 cst GB/T 265 12 Pour Point -20 Propertie Great in anti-water; Better mechanical invariability; Better anti-rust; Good oxidation stability; Can take place of calcium base and sodium base greases. This product is made of refined base oil, thickened by fatty acid metallic soap thickener, added with many kinds of additives, for instance, abrasion and extreme pressure resisting, anti-corrosive, antioxidant and rustproof etc.
The feldspar mineral is by far the most plentiful mineral found beneath the earth. It is used in most of the daily usage products. Feldspars are classified into three types: feldspar, pegmatite, and feldspathic sand, and their alumina and alkali content make them ideal for industrial purposes Feldspars and pegmatites are useful functional fillers in the paint and glue industries, as well as fluxing agents in ceramics and glass manufacture. Feldsparâ??s physical properties include high potassium and low iron content. It has pH stability and has consistent hardness with a rating of 6 to 6.5 on the Mohs scale. It is majorly found and mined in the state of Rajasthan. We at Aryan tiles develop Feldspar minerals with the specialized qualities to cater to the specific industries such as ceramics, glass, and paints to mention a few. Feldspar is an excellent source of alumina leading to improvement in the end-product hardness, durability, and chemical corrosion resistance. A feldspar is typically referred to as 'potash' if there is significantly more potassium than sodium (typically there will be 2-5% Na2O). It is also used as fluxing agent for flat and container glass, as well as insulation wools and also in the ceramic industry. Our Feldspar mineral is known for its low quantities of colored oxides, making them ideal for manufacturing white tiles and sanitary ware. Further, Feldspar is also used in paints industry as it has great dispersibility, chemical inertness, pH stability, abrasion resistance and low viscosity. White soda feldspar has high sodium content. It is a common raw ingredient used in glass, ceramics, and to some extent in paint, plastics, and rubber as a filler and extender. The alumina from feldspar improves the hardness, durability, and chemical corrosion resistance of glass. Feldspar's alkalis (calcium oxide, potassium oxide, and sodium oxide) operate as a flux in ceramics, reducing the melting temperature of a mixture. We at Aryan Tiles have an enormous selection of both white potash and white soda feldspar minerals. We have a deep understanding of how our Feldspar minerals can be used in manufacturing our customersâ?? end-products and suit their particular industryâ??s needs. And, thus we have been able to supply to various industries and optimize our customersâ?? product manufacturing with our premium quality mineral
EES All in one system 16KWH LiFePO4 Lithium Battery with AC Charger and 10KW Inverter for solar energy storage application ESS including LiFePO4 Lithium Battery with BMS, off grid pure sine wave inverter, AC/DC charger. This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications. Product advantages: All-in-one design, high integration and space saving installation Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable;
Our All in one system 32KWH LiFePO4 Lithium Battery with AC Charger and 12-15KW 120/240V Inverter for mobile vehicle application ESS including LiFePO4 Lithium Battery with BMS, off grid pure sine wave inverter, AC/DC charger. This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications. Product advantages: All-in-one design, high integration and space saving installation Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable;
The feldspar mineral is by far the most plentiful mineral found beneath the earth. It is used in most of the daily usage products. Feldspars are classified into three types: feldspar, pegmatite, and feldspathic sand, and their alumina and alkali content make them ideal for industrial purposes Feldspars and pegmatites are useful functional fillers in the paint and glue industries, as well as fluxing agents in ceramics and glass manufacture. Feldsparâ??s physical properties include high potassium and low iron content. It has pH stability and has consistent hardness with a rating of 6 to 6.5 on the Mohs scale. It is majorly found and mined in the state of Rajasthan. We at Aryan tiles develop Feldspar minerals with the specialized qualities to cater to the specific industries such as ceramics, glass, and paints to mention a few. Feldspar is an excellent source of alumina leading to improvement in the end-product hardness, durability, and chemical corrosion resistance. A feldspar is typically referred to as 'potash' if there is significantly more potassium than sodium (typically there will be 2-5% Na2O). It is also used as fluxing agent for flat and container glass, as well as insulation wools and also in the ceramic industry. Our Feldspar mineral is known for its low quantities of colored oxides, making them ideal for manufacturing white tiles and sanitary ware. Further, Feldspar is also used in paints industry as it has great dispersibility, chemical inertness, pH stability, abrasion resistance and low viscosity. The white potash is a distinctive mineral with more potassium content. Our feldspar mineral is of high purity grade, free from impurities and naturally sourced. Our skilled personnel use technology advanced machines to extract the supplied feldspar under their close supervision. This feldspar is utilized in variety of industries, including building, mining, chemical, and others. It is also ideal for making porcelain and earthenware.
Product Features: 1 All-in-one design, high integration and space saving installation 2 Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years 3 Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability 4 Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage 5 BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range 6 CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability 7 System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell 8 Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; 9 Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed Performance characteristics 1 Small size and light weight, Maintenance-free 2 Environmental protection and pollution-free materials, no heavy 3 Accurately estimate the state of charge of the battery pack, that is, the remaining power of the battery, to ensure that the power of the battery pack is maintained within a reasonable range 4 Built-in BMS management system with comprehensive protection and monitoring control functions 5 5" LCD screen display, easy to operate, can check the temperature, voltage, working status, discharge current, dynamic and static SOC algorithm of a single cell, local display of alarm info, alarm level distinction, accurate positioning of abnormal cells 6 Main control MCU can be centrally controlled and manage peripheral settings (AC charging module, inverter module, solar charging module) to adjust the charging current and voltage of peripheral devices according to the battery charging curve, making the system more reliable
1 All-in-one design, high integration and space saving installation 2 Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years 3 Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability 4 Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage 5 BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range 6 CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability 7 System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell 8 Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; 9 Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed Performance characteristics 10 Accurately estimate the state of charge of the battery pack, that is, the remaining power of the battery, to ensure that the power of the battery pack is maintained within a reasonable range 11 Built-in BMS management system with comprehensive protection and monitoring control functions 12 5" LCD screen display, easy to operate, can check the temperature, voltage, working status, discharge current, dynamic and static SOC algorithm of a single cell, local display of alarm info, alarm level distinction, accurate positioning of abnormal cells 13 Main control MCU can be centrally controlled and manage peripheral settings (AC charger, inverter, solar charger) to adjust the charging current and voltage of peripheral devices according to the battery charging curve, making the system more reliable
Product advantages: ï?¬All-in-one design, high integration and space saving installationï¼? ï?¬Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 yearsï¼? ï?¬Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed Performance characteristics Built-in BMS management system with comprehensive protection and monitoring control functions 5" LCD screen display, easy to operate, can check the temperature, voltage, working status, discharge current, dynamic and static SOC algorithm of a single cell, local display of alarm info, alarm level distinction, accurate positioning of abnormal cells Main control MCU can be centrally controlled and manage peripheral settings (AC charging module, inverter module, solar charging module) to adjust the charging current and voltage of peripheral devices according to the battery charging curve, making the system more reliable BMS battery management system, with SOC automatic calibration and high current passive balance function, combined with perfect operation control and management strategy, to achieve accurate and efficient management EMS energy management system, BMS with solar controller/AC charger, inverter centrally manages charge and discharge, effectively controls the charge and discharge current within the cell usage conditions, protects the cell and extend its service life
Product introduction: This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications. Product advantages: All-in-one design, high integration and space saving installationï¼? Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed
