Groundnut oil, also known as peanut oil, is an edible vegetable oil extracted from peanuts. It is widely used in cooking, food processing, pharmaceuticals, and cosmetics. Below are the general specifications for groundnut oil: Physical Properties: Appearance: Clear, bright, and transparent liquid Color: Light yellow to golden yellow Odor & Taste: Mild peanut aroma and taste, free from rancidity Texture: Smooth, free from impurities Moisture & Volatile Matter: Max 0.1% Refractive Index (at 40C): 1.460 - 1.470 Density (at 20C): 0.910 - 0.920 g/ml Chemical Properties: Free Fatty Acid (FFA) (as Oleic Acid): Max 0.2-1.0% (depending on grade) Peroxide Value: Max 10 meq/kg Iodine Value: 85 - 100 (indicates degree of unsaturation) Saponification Value: 185 - 195 mg KOH/g Unsaponifiable Matter: Max 1.0% Acid Value: Max 2.0 mg KOH/g Phosphorus Content: Max 10 ppm Fatty Acid Composition (% by weight): Saturated Fatty Acids: Palmitic Acid (C16:0): 8-14% Stearic Acid (C18:0): 1-4% Monounsaturated Fatty Acids (MUFA): Oleic Acid (C18:1): 35-72% Polyunsaturated Fatty Acids (PUFA): Linoleic Acid (C18:2): 13-45% Contaminants & Adulterants: Pesticide Residues: As per country-specific regulations (FSSAI, EU, FDA) Heavy Metals: Lead (Pb):
BLCO. No chain of brokers. We are direct to the source. 2 million barrels and more per consignment. Long term contracts possible. Please do not waste our time - we will not waste yours. Contact us only if you can perform. Delivery can begin within 7 to 14 days of funding validation. Prefer European and Western delivery, but will consider all REAL Buyers. Product Specifications: SPECIFIC GRAVITY: 0.8398 API AT 60 DEG. F: Min 35.0 â?? Max 37.00 +/- 5% (ASTM D-1298) WATER CONTENT BY DISTILLATION: 0.2% (ASTM D-4006) POUR POINT DEGREES F: BELOW 40 (ASTM D-97) SULFUR WEIGHT %: 0.14 (ASTM D-139) SALT CONTENT PARTS PER BILLION: 3.0 (ASTM D-526) REID VAPOR PRESSURE (P.S.I.G.): 6.52 (ASTM D-529) KINEMATIC VISCOSITY @ 30 DEG. C: 2.2 (ASTM D-523) DISTILLATION INITIAL BOILING POINT (IBP): 35 DEG. C (ASTM D-86) DISTILL TO 75 DEG. C VOL.%: 7.0 DISTILL TO 175 DEG. C VOL.%: 35.5 DISTILL TO 250 DEG. C VOL.%: 51.5 DISTILL TO 300 DEG. C VOL%: 60.5 COLOUR Dark Brown
Packaging in 20kg cartons, loading 27MT per container. Our prices are affordable. Specifications: - white skin - no broken bones - outer yellow skin off - well cleaned and fresh - no bruises - no black pads or ammonia burns - no bad smells - no excessive blood or blood stains - moisture content is less than 3% - weight per piece is 35-55g Size : 35-55 grammes per piece (Average weight per piece of Chicken feet) Packaging on pallets in boxes with poly bags of 5kg x 4, depending on clients' request. Minimum order quantity: 1FCL(full container load) Cooled reefer (-18 degree celsius) If interested to place an order, email us and include your contact details and company information. Our chicken feet & paws comes with all certificates of Health and Quality. Inspection done by SGS, Health Certificate and Origin Certificate. Shipping by worldwide freight companies.
Polarization: 99.80% degrees min Ash by electrical conduct: 0.04% max (on dry weight basis) Ash content: 0.04% max Moisture: 0.04% max ICUMSA 45 RBU: Max (Brazil S.G.S scale) Solubility: 100% dry and free flowing Color: Sparkling white ICUMSA Maximum 45 attenuation index units (ICUMSA method #: 4-1978) Radiation: Within CS-137 of 50 BQ per Kg Granulation: Fine crystal Crop: Latest Magnetic particles: Mg/Kg 4 max SO2 mg/kg 20 max Sulfur Dioxide: 20 Mg/Kg min Sediments: None Smell: Typical and specific for sugar Reducing sugar: 0.05% Max by weight HPN Staph Aureus not detected in 1 gram Maximum AS: 1 P.P.M. Maximum PB: 1 P.P.M. Maximum CU: 3 P.P.M. Substance: Solid Crystal Tolerance: 5% (+/-) CHICKEN PAWS SPECIFICATIONS Quality: Grade A Frozen Chicken Paws Process: BQF Cut at the Level of the joints Meaty and Coating of Normal Fat Average Weight Per Piece: 35 â?? 45 grams Average Length Per Piece: 09 â?? 12 cm Processing: 100% Fresh and Frozen White Skin Shelf Life: 24 months Frozen Requirements: Blast Frozen at -40�°C Stocked and Stored: -18�°C During Transportation: -18 �°C Ice Content: Less Than 0.3% Outer Yellow Skin Off Well Dressed and Cleaned No Black Pads or Ammonia Burns No Bad Smells, No Excessive Blood or Blood Stains No Excess Water No-Broken Bones Fresh and Hard Nail * No Bruises No Feathers * No Hairs Moisture Contents Less Than 2% Production Age: Not More Than 60 days from the shipping date Chemical Burns Presence: No Chemical Burns Black Spot: Less than 1% Broken Bone: Less Than 1% Antibiotics: Presence Not Allowed Pathogenetic Organisms (Including Salmonella): Not Allowed Foreign Substances: Not Allowed * Remanants of Feathers: Not Allowed Frozen Requirement Drainage: 1�°C - 5�°C For 8 hours Moisture Content Less Than 1% Blasted at: -40�°C SIF code: 1, 103, 87, 121, 1001
Endurence: more than 5, 000 mating cycles guaranteed test voltage(contact to contact):: 0.7--2.1 kv rms rated current: 1.5--35 a operating temperature range: - 50¡æ--125¡æ ingress protection: ip50 humidity: up to 95% at 60oc vibration: 10-2000hz, 15g As per specified
D-sub metal hood/cover/housing Brand/series,Zechao Cable exit angle,Straight / right angle/45 degree Pin count,9.15.25.37.50p Material, backshell,Die-cast metal,zinc alloy¡,169; Color,Gun black (black nickel), pearl nickel, bright pearl nickel.Imitation gold;chrome Special features,Emi/rfi shield, grommets Characteristic of products,Pro-environment not easily embroidery, not changeful form stable performance; Screws,Short screw thread 4-40 unc Jack screw thread 4-40 unc Product certification,Rohs Product use,Computer, communication, medical equipment, cable, aviation, digital, machinery and equipment, game, etc Descriptions Easy to assemble db15/hd26 two piece metal backshells are a great choice for the "do it yourself" consumer. Die cast zinc alloy construction is practically indestructible and offers maximum protection against harmful emi/rfi. When used with shielded cable, a complete ground can be made between connector shells. According to the customer's request to die sinking, price concessions, the manufacturers, factory direct sale. Applications Serial data transmission data networks Instrument control device management Packing instruction Bulk or single packaged units Plastic bags points set with inner packing carton packing. 1.Material zinc 2 plating gold/nickel/tin 3.Support oem&odm 4.Compliant rohs 5.D-sub metal 90 standard + sl backshells
Specifications: Origin: Nigeria Nnpc Specific Gravity: 0.8398. Api At 60 Deg. F: min 35.0 - Max 37.00 +/- 5% (astm D-1298). Water Content By Distillation: 0.2% (astm D-4006). Pour Point Degrees F: below 40 (astm D-97). Sulfur Weight %: 0.14 (astm D-139). Salt Content Parts Per Billion: 3.0 (astm D-526). Reid Vapor Pressure (p.s.i.g.): 6.52 (astm D-529). Kinematic Viscosity @ 30 Deg. C: 2.2 (astm D-523). Initial Boiling Pt. (ibp): 35 Deg. C (astm D-86). Distill To 75 Deg. C Vol.%: 7.0. Distill To 175 Deg. C Vol.%: 35.5 Distill To 300 Deg. C Vol%: 60.5 Colour brown.
The clove of commerce is the air dried unopened flower bud obtained from evergreen medium sized tree. The tree grows to a height of 10-12 mtrs and start flowering in about 7 years. It continues to produce flower buds for 80 or more years. It is a valuable spice of the orient. Clove clusters are plucked by hand when the buds are fully developed with a pronounced pink flush and then dried over several days in the sun. Unopened flower buds, leaves and stalks yield essential oil. The plant is indigenous to North Molucca Islands of Indonesia. It is also grown in Zanzibar, Madagascar, Malaysia, Sri Lanka, and India. The tree prefers well drained rich soil with sufficient soil moisture throughout the year. High atmospheric temperature (25 to 35 degree C) with heavy sun light, good and well distributed rainfall (above 150 cm) and high humidity (above 70%) are preferred. The use of clove in whole or ground form is mainly for culinary purposes and as a flavouring agent in food industry. Its flavour blends well with both sweet and savory dishes. It is highly valued in medicine as carminative, aromatic, and stimulant. The antiseptic and antibiotic properties of clove oil are used in medicine especially in dentistry, oral and pharyngeal treatments. It has wider applications in preparations of toothpaste and mouthwashes, soaps, and perfumes. It is also reported to help diabetics in sugar assimilations.
The clove of commerce is an unopened air-dried flower bud obtained from an evergreen medium-sized tree. It grows to a height of 10-12 m and blooms after about 7 years. It continues to produce flower buds for 80 or more years. It is available. Clove clusters are hand-picked when the buds are fully developed with a pronounced pink flush and then dried over several days in the sun. unopened flower buds, leaves, and stalks. Yield essential oil. The plant is indigenous to the North Molucca Islands of Indonesia. It is also grown in Zanzibar, Madagascar, Malaysia, Sri Lanka, and India. The tree prefers well-drained, rich soil with sufficient soil moisture throughout the year. High atmospheric temperatures (25 to 35 degrees Celsius) with abundant sunlight, adequate and evenly distributed rainfall (above 150 cm), and high humidity (above 70%) are preferred. The use of clove in whole or ground for mismainly for culinary purposes and as flavouring agent in food industry. Its flavour blends well with both sweet and savory dishes. It is highly valued in medicine as a carminative, aromatic, and stimulant. In Indonesia, the lion's share of production is consumed in the production of kretek cigarettes. The antiseptic and antibiotic properties of clove oil are used in medicine, especially in dentistry, oral and pharyngeal treatments. It has wider applications in the preparations of toothpaste and mouthwashes, soaps, and perfumes. It is also reported to help diabetics in sugar assimilation.
1. The industrial chiller is divided into two categories: Water-cooled chiller and air-cooled chiller. Water-cooles chiller cooled by water, using with cooling tower and water pump, the other cooled by fan, can be used independently. 2. Our compressor is imported from Italy, France and so on, being of high-quality built-in safe protection, with low noise, the electricity of province is durable. 3. Cooling capacity range: 9.8kw~189kw 4. Normal conditions: Chilled water inlet temperature is 20 degrees, outlet temperature is 15 degrees. Cooling water inlet temperature is 30 degrees, outlet temperature is 35 degrees. But the temperature can be set in 5-30 degress range according to customers' request, and the lowest temperature can arrive -25 degress. 5. Stardard Input power: 3P-380V-50Hz, Allowable fluctuate voltage: & 6. The quantity of compressor can be one or two, each compressor is independent refrigeration system. Each other run independently. When the one is working, the other can be working or not. Weight:680Kg Dimensions:1700*870*1680mm
Basic Parameters Dimensions: 201 x 99 x 35 mm Weight: 333g Adapter Input: AC 100 ~ 240 V Output: DC 24V 2.65A Display mode Segment LCD with white backlight + LED in red and green Function Introduction Charge Active, pre-charge, constant current and constant voltages are the stages of charging mode. The initial charging mode depends on the battery voltage, so active and pre-charge don't happen to every batteries. For charging mode and current, please refer to the paragraphs of charging mode and charging current on page 2 & 3. Tester will stop charging if one of the conditions below was met. 1) Remaining capacity 99% & current intensity = 0 2) Remaining capacity = full charge capacity 3) Current intensity reduce to end charge current when constant voltage charge 4) Remaining capacity reach up the set value Discharge Constant current discharge for double loads Inner load: 0 ~ 1000mA, adjustable continuously via Battery Manager External load: 0mA, 500mA, 1000mA, 1500mA, 2000mA, five gears with dip switches offered Tester will stop discharging if one of the conditions below is met. 1) Remaining capacity set value 2) Voltage set value 3) Current intensity reduce to zero Remarks: Many batteries can not measure exact current intensity, which cause an else current value appears after you set a value. However, the actual discharging current is the same with your set value. Test Testing time is 12 seconds and the purpose is to check both the charging and discharging performances. After finishing test, LED flickers with green color and LCD reports the test result. Normal: Test OK Shown on LCD Abnormal: Test NG Shown on LCD Possible causes and solutions for the abnormal: 1) Cause: battery voltage is too low to discharge Solution: try to charge the battery to raise voltage 2) Cause: remaining capacity is too full to charge any more Solution: try to discharge the battery to reduce the remaining capacity 3) Bad contact of battery connecting wires 4) Damaged battery 5) Tester trouble Capacity Correction The battery capacity value in the battery management chip will different from the actual capacity after a battery goes through many recycling cycles. It will affect the use of the battery when the difference reaches a certain degree. Capacity correction is to deep discharge a battery and then fully charge, which will correct the capacity value in the battery management chip. Remarks: Discharging current can be set via Battery Manager. Deep discharge will cause a battery losing communication with tester, so battery dropping phenomenon may happen in the discharging process if the end capacity and voltage are set too low. In such a case, active charge will make the battery work again. 50% Capacity CD50%: charge firstly, and then discharge to 50% capacity DC50%: discharge firstly, and then charge to 50% capacity Online Functions Tester can be connected with master machine via a USB port. Users can monitor, control and set parameters via Battery Manager software in the master machine. Monitoring Battery information can be monitored via three windows. 1. Home screen Battery bar and brief information can be read on home screen. 2. Battery detail information window Show smart battery data in real time and the data can be saved and printed in image format. 3. Battery graph window Voltage, current and capacity are traced in curves. Control Battery Manager can control slave machine completely. Right-click menu on the battery bar includes the related commands. Attention All the functions of charge, discharge, capacity correction and 50% capacity are comply with the charging discharging conditions, which are showed on function introduction paragraph in page 4 & 5, so parameters should be set reasonably. Especially, deep discharge will cause a battery losing communication with tester. Others 1. Active cooling 2. Active batteries of zero voltage When a battery is deep discharged, the discharge protection circuit will start up and the voltage in the battery connector will become zero voltage. In this case, an appropriate voltage should be supplied to active the battery. 3. Battery identification Battery information can be read from battery management chip after establishing communication. 4. Intelligent protection Against over-current, over-voltage, over-charge, over-heat and short circuit. 5. Fan Discharging mode: fan startup Other modes: fan startup when temperature above 48 Fan stop working when temperature below 40 6. Trouble alarm LED flickers in red color and current command stops when one of the conditions below happen. 1). There is not current for around 50 seconds when charge. 2). There is not current for around 25 seconds when discharge. 3). Charging time is above 8.8 hours. 4). Discharging time is above 9.9 hours. 5). Suitable for almost all laptop batteries, above 95% Structure Accessories 1).1 * adapter 2). 1 * USB cord 3). 1 * CD 4). 13 * connectors 5). 10 * cables 6). 10 * jumpers 7). 1 * loader Standard Export Carton
Model name : BDS-GSL(Include calibretion weight/spoon/tweezers) Units : g/oz/ozt/dwt/gn/tl Capacity:20g/0.001g,30g/0.001g,50g/0.001g Platform size : 128*71.5*30mm Carton size:58.5*35*18cm Scale color : black/red/silver Power : 2*AAA battery(Include) Packing :50pcs/carton 11kg Features :High-precision straining resistance sensor Super anti-overload function Optional power saving mode With LCD display, blue backlight Operating temperature: 10 to 30 degree celsius
Product Name ; Zinc Sulphate Heptahydrate (EP/LR) Chemical Name ; Zinc Salt Heptahydrate CAS No. : 7446-20-0 Color & Physical Form ; White Crystalline Powder Active Ingredient : ZnSO4.7H2O Assay L 99 - 102% Molecular Wt. ; 287.54 pH : 4.0 - 6.0 Zn-Content ; Min. 21% Chloride : NMT 0.01% Iron : NMT 0.005% Copper ; NMT 0.0005% Cadmium ; NMT 0.001% Total Nitrogen : NMT 0.005% Heavy Metals (as Pb) ' NMT 0.005% Loss on Drying (105 degree C) : 35% - 39%
GBCCUM21PF153A DEFINITE TIME REVERSE POWER RELAY Technical Specifications Model No : CCUM21PF153A CCUM21 Case Size - 1-1/2D VERT. 10T Current Rating Cup unit - 1 Amp CT V.T Secondary Volts - 110 V ac Torque Angle (MTA)I Lead V- 30 Degree Frequency - 50 Hz Aux. Voltage - 48 / 50 V dc Contacts - 2 N/O S/R Flag - Yes Mounting - Flush Timing Range - 2.5 - 25 Secs Ext.Resistor - 400 Ohms 35 Watts Name Plate VTT RZF9151-601 Name Plate RFH9072-604 Outline Diagram MFJ 013 & RFJ0349 Wiring Diagram MPDZ609-01-1
GBCCUM21PF163A DEFINITE TIME REVERSE POWER RELAY Technical Specifications Model No : CCUM21PF163A CCUM21 CASE SIZE - 1-1/2D VERT. 10T CURRENT RATING CUPUNIT - 5 AMP C.T. V.T/P.T SECONDARY - 110 V AC TORQUE ANGLE MTA I LEAD V - 30 DEGREES FREQUENCY - 50 HZ MOUNTING - FLUSH TIME DELAY P/U OR D/O - 2.5 - 25 SECS. AUX.VOLTAGE - 110/125 V DC CONTACTS - 2 N/O S/R FLAG - YES External Resistor 1.3 K OHMS 35 W Name Plate RZF9151-601 RFH9072-604 Outline Diagram MFJ013 & FJ0349 Wiring Diagram MPDZ609-01-1
GBCCUM21PF175A DEFINITE TIME REVERSE POWER RELAY Technical Specifications Model No : CCUM21PF175A CCUM21 Case Size - 1-1/2D VERT. 10T Current Rating Cup unit - 1 Amp CT V.T Secondary Volts - 110 V ac Torque Angle (MTA)I Lead V- 30 Degree Frequency - 50 Hz Aux. Voltage - 110 / 125 V dc Contacts - 2 N/O S/R Flag - Yes Mounting - Flush Timing Range - 12 - 120 Secs Ext.Resistor - 1.3K Ohms 35 Watts Name Plate VTT RZF9151-601 Name Plate RFH9072-604 Outline Diagram MFJ 013 & RFJ0349 Wiring Diagram MPDZ609-01-1
GBCCUM21PF196A DEFINITE TIME REVERSE POWER RELAY/VTT 11 Technical Specifications MODEL NUMBER CCUM21PF196A CCUM21 Case Size 1-1/2D Ver.10T Currnt Rating Amps Cupunit 1 Amp V.T Secondary Volts Cupunit 110 V Ac Torque Angle (mta)I lead V 30 Degrees Frequency 50 Hz Aux.Voltage 220/230 V dc Contacts 1 N/O 1 N/C S/R Flag YES Timing Range Secs 0.5 - 5 Secs. Mounting Flush External Rest 3.3 K 35 Watts Name Plate-1 RFH9072-604 Name Plate-2 RZF9151-601 Outline Drawing MFJ013 & FJ0349 Wiring Diagram MPDZ609.01-2
The industrial chiller has the following features: 1. The industrial chiller is divided into two categories: water-cooled chiller and air-cooled chiller. Water-cooles chiller cooled by water, using with cooling tower and water pump, the other cooled by fan, can be used independently. 2. Our compressor is imported from italy, france and so on, being of high-quality built-in safe protection, with low noise, the electricity of province is durable. 3. Cooling capacity range: 9.8kw~189kw 4. Normal conditions: chilled water inlet temperature is 20 degrees, outlet temperature is 15 degrees. Cooling water inlet temperature is 30 degrees, outlet temperature is 35 degrees. But the temperature can be set in 5-30 degress range according to customers' request, and the lowest temperature can arrive -25 degress. 6. The quantity of compressor can be one or two, each compressor is independent refrigeration system. Each other run independently. When the one is working, the other can be working or not. 7. The quantity of compressor can be 1 to 4, each compressor is independent refrigeration system. Each other run independently. When the one is working, the other can be working or not. 8. Use plc microcomputer control from france schneider, both english and chinese human-machine interface. 9. Wide range of variable chilled water temperature to meet the industrial requirements throughout whole year. 10. Our standard refrigerant is r22, but you can choose to use environmental refrigerant such as r407c, r134a or r507. Weight:380kg Dimensions:1530*780*1470mm
The industrial chiller has the following features: 1. The industrial chiller is divided into two categories: water-cooled chiller and air-cooled chiller. Water-cooles chiller cooled by water, using with cooling tower and water pump, the other cooled by fan, can be used independently. 2. Our compressor is imported from italy, france and so on, being of high-quality built-in safe protection, with low noise, the electricity of province is durable. 3. Cooling capacity range: 9.8kw~189kw 4. Normal conditions: chilled water inlet temperature is 20 degrees, outlet temperature is 15 degrees. Cooling water inlet temperature is 30 degrees, outlet temperature is 35 degrees. But the temperature can be set in 5-30 degress range according to customers' request, and the lowest temperature can arrive -25 degress. 5. Stardard input power: 3p-380v-50hz, allowable fluctuate voltage: 161;¨¤ 10%, allowable voltage difference in phase: 161;¨¤ 2%, can also be customized according to customers'request 6. The quantity of compressor can be one or two, each compressor is independent refrigeration system. Each other run independently. When the one is working, the other can be working or not. 7. The quantity of compressor can be 1 to 4, each compressor is independent refrigeration system. Each other run independently. When the one is working, the other can be working or not. 8. Use plc microcomputer control from france schneider, both english and chinese human-machine interface. 9. Wide range of variable chilled water temperature to meet the industrial requirements throughout whole year. 10. Our standard refrigerant is r22, but you can choose to use environmental refrigerant such as r407c, r134a or r507 . Weight:120kg Dimensions:890*500*840mm
Length: 35 - 45 - 50 cm Goods are stored in container RF Exp: 24 months Frozen at -18 degrees Celcius
