PRODUCT NAME: 0.13mm 14mm 4160mm dog leash constant force spring---- Stainless steel / starter spring / recoil spring / Flat spring / rewind spring / coil spring / Constant Force Spring / Constant Torque Spring PRODUCT SCOPE: Spring Thickness: 0.13mm Spring Width: 14mm Spring Length: 4160mm Inner Diameter:5mm Outer Diameter: 20mm Hook size: Spring Material: Stainless steel HS Code: 73202090
PRODUCT NAME: 0.13mm 14mm 4160mm dog leash constant force spring---- Stainless steel / starter spring / recoil spring / Flat spring / rewind spring / coil spring / Constant Force Spring / Constant Torque Spring PRODUCT SCOPE: Spring Thickness: 0.13mm Spring Width: 14mm Spring Length: 4160mm Inner Diameter:5mm Outer Diameter: 20mm Hook size: Spring Material: Stainless steel HS Code: 73202090
Generally, the CNC Spring machine builds tower and compression springs. This automatic machine comprises a CNC programming unit and a servo motor. Therefore, the working process of the machine improvised efficiently. Hence, the machine increases the production rate of the manufacturing industry. This CNC spring coiling machine produces 3 axis modeled outputs, which is otherwise referred to as 3-dimensional models. The 3-axis automatic spring machine also consists of a Wire Feeding Axis and Cam Axis. The machine ensures high-speed production with precision tolerances. It is highly valued for making precise outputs and its durability. Model SC-320 Axis 3 Wire Diameter 0.4-2.0 Max.Outside Diameter(MM) 38 Wire Feeding Rollers Groups 2 Wire Feeding Motor(KW) 1.8 Cam motor(KW) 1.8 Pitch motor(KW) 0.4 Compressor Air Pressure 5-6kg/cm Dimension(M) 0.9*0.8*1.6 Weight(KG) 500
Customized Industrial Usage Stainless Steel metal Constant Force torsion memory Tension Spring Material Available:Steel:1018,1213,12L14,1215,C45, etc. Stainless Steel:201,301,303,304,316,416,420, etc. Aluminum Alloy:5052,6061,6063,6082,7075,etc Brass Alloy:360,36000,3601,3602,3603,3604,38500, etc. Bronze:C51000,C54400, etc. Plastic: Pom, ABS, Nylon, etc. Treatment:Anodize, sandblast,polishing,nickel plating,electroplating,annealing,chrome plating, laser etc.
Customized Industrial Usage Stainless Steel metal Constant Force torsion memory Tension Spring Material Available:Steel:1018,1213,12L14,1215,C45, etc. Stainless Steel:201,301,303,304,316,416,420, etc. Aluminum Alloy:5052,6061,6063,6082,7075,etc Brass Alloy:360,36000,3601,3602,3603,3604,38500, etc. Bronze:C51000,C54400, etc. Plastic: Pom, ABS, Nylon, etc. Treatment:Anodize, sandblast,polishing,nickel plating,electroplating,annealing,chrome plating, laser etc.
Customized Industrial Usage Stainless Steel metal Constant Force torsion memory Tension Spring Material Available:Steel:1018,1213,12L14,1215,C45, etc. Stainless Steel:201,301,303,304,316,416,420, etc. Aluminum Alloy:5052,6061,6063,6082,7075,etc Brass Alloy:360,36000,3601,3602,3603,3604,38500, etc. Bronze:C51000,C54400, etc. Plastic: Pom, ABS, Nylon, etc. Treatment:Anodize, sandblast,polishing,nickel plating,electroplating,annealing,chrome plating, laser etc.
Material:Stainless steel Min.order:1000Piece /Pieces Lead Time:8-10 days Style:Coil,Disk,Dish,Leaf,Wire,Waved Usage:Machine parts/lighting Accessories/Hardware/Plastic
Customized Industrial Usage Stainless Steel metal Constant Force torsion memory Tension Spring Material Available:Steel:1018,1213,12L14,1215,C45, etc. Stainless Steel:201,301,303,304,316,416,420, etc. Aluminum Alloy:5052,6061,6063,6082,7075,etc Brass Alloy:360,36000,3601,3602,3603,3604,38500, etc. Bronze:C51000,C54400, etc. Plastic: Pom, ABS, Nylon, etc. Treatment:Anodize, sandblast,polishing,nickel plating,electroplating,annealing,chrome plating, laser etc.
Standard:AISI, ASTM, BS, DIN, GB, JIS, Other Grade:DX01DX51 SPCC Q195 Treatment:color coated/galvanized Application:Building/Roofing/electrical/appliances/transport/packaging,etc Special Use:PPGI Width:750/762/914/1000 Length:as your request Width:600-2000mm Length:500-6000mm Coating:40-275g/m2 Coil ID:508/610 mm Coil Weight:3-5 Tons
We deals in the following products of India, China, Taiwan and Korea Origin:- 1)Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc) 2)Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc) 3)Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc) 4)Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc) 5)Steel Tube and Pipes ( ERW, CRW, CRS, Black, Galvanized, Stainless ) 6)Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps. 7)Heavy Duty Props & Light Duty Props. 8)Nuts, Bolts, Nails & Fastners 9)System Scaffolding, Base Plate & Adjustable Base. 10)Steel Tie Rod, Waller Plates and Wing Nuts. 11)Drop Forged and Pressed Sheet Metal Couplers of all types. 12)Steel Billets, Steel Angle & Steel Channels.
Item Name Factory 5 Axis CNC Machining Turning Aluminum 7075 Parts for Automation Machinery Industry Available materials Aluminum: 5052, 5083, 6061, 6082, 7075 Steel/Carbon steel/Alloy steel/Harden Steel/Die steel:Q235, #45, Q345, Y12, Y30, 40Cr Stainless Steel: SUS303, SUS304, SUS303Cu, SUS316, SUS316L, SUS416, SUS431 Brass: C230/C260/C360 Pure Cooper Plastic: POM, POM-C, Nylon, Acrylic, ABS, PEEK, Plexiglas, PP, PE Titanium: TA1, TA2, TA3, TA4, TC4 CNC turning work range �?4mm-�?500mm*1000mm CNC milling work range 510mm*1520mm*800mm tolerance �±0.01mm and hole tolerance is �±0.005mm. Finished Anodized, Powder coating, Electroplating, Nitriding, Sandblasting, Heat treatment, Blueing, Grinding, Polishing, As machined, DRW format PDF, CAD for 2D; x_t,.igs,.stp, .step for 3D Processing Equipment CNC Machining center, CNC Lathe, Turning machine, Milling machine, Drilling machine, Internal and external grinding machine, Cylindrical grinding machine, Tapping drilling machine, Wire cutting machine, polishing machine, etc. Surface Roughness Ra 0.2-Ra 3.2 MOQ Both small orders and large orders are welcomed Delivery Time Leadtime of samples: 3-5 days mass production: 10-25days Quality control "100% Inspection before shipment IQC â?? IPQC â?? OQC/FQC â?? Quality Complain Feedback â?? Audit & Training." Other services CNC engraving, Laser engraving, silk printing, Knurling Application Mechanical industry, Digital Cutting, pneumatic, hydraulic, industrial parts, Farm equipment, Electric Skateboard, Camera, Audio, Instrument, Automation Machinery etc
DESCRIPTION The SZ-48P-5A 5-Axis Series CNC machine is a mid-sized CNC for machining wood, composites, plastics and non-ferrous metals. The SZ-48P5A is built on a massive steel frame with fixed gantry, moving table design to ensure maximum rigidity at the cutting tip. The structure of the machine allows for high speed simultaneous 5 axis machining and is has a machining area of 3100 x 1850 x 950mm. The SZ-48P5A comes as standard with a powerful 10kw HSD spindle and 8 position rotary ATC as standard. High speed machining and smooth motion are achieved using a state of the art OSAI NC control system. APPLICATIONS The SZ-48P5A is a state of the art 5-Axis machining centre with full 5 axis interpolation. Designed with mould manufacture in mind the SZ-48P5A is an extremely rugged machine with an extra heavy duty gantry and machine table for maximum rigidity and strength to provide high speed machining in all 5 axes. Equipped with a state of the art Osai digital closed loop NC control system the machine is capable of machining at speeds up to 20m/min. The SZ-48P5A 5 Axis comes as standard with a 10kw HSD spindle and HSK 63F tool clamping for extra precision. The rotary ATC with 8 positions tool carousel can complete tool changes in under 8 seconds, making it a true high speed machining centre for the mould, wood, plastic and composite industries. The standard table size of 1220 x 2440mm allows machining of large parts in full 5 axis. The open design of the machine adds greater flexibility as larger parts can be indexed and passed under the gantry for infinite length machining. Due to the flexibility of the MAXI-M9 it is commonly used for mould making, machining moulds in wood, resin tooling board, EPS and composites, trimming of vacuum formed mouldings, plastic fabrication, GRP machining, props and model making, profiling, solid surface machining and contouring. STANDARD CONFIGURATION Travelling area: 1850 x 3100 x 950mm Extra heavy duty welded steel frame and gantry for maximum straightness and rigidity 12Kw HSD Spindle 8 position rotary ATC with HSK63F precision tool clamping THK lubricated for life linear rails and guide blocks Yaskawa servo drivers and motors for high power and speed Osai PC interfaced Numerical Control System Automatic machine lubrication system T-Slot clamping table MPG XYZ Hand Wheel for easy origin and work piece setting. Tool setting device One starter set woodworking tools 3 x collets, choice from 1-20mm (imperial available if preferred) Delta Inverter 0-22000rpm control Schneider Electronic Spare Parts Japanese OMRON limit switch SEAZEA double sheathed, fire retardant and highly flexible towline cable can be bent 300,000 times Igus cable chain carrying system Electronic safety mat, protection net around the machine Voltage: 3PH 415V 50HZ OPTIONS Oil Mist cooling system for cutting non-ferrous metals T-slot/vacuum combination table with Becker vacuum pump Extra tool holders
The manufacture of both granulated and powdered garlic is the same, except for the grinding or powdering process. Granulated garlic is coarse while garlic powder is ground extra fine. Whole cloves of garlic are peeled, cleaned and then sent into a machine that slices and chops them into smaller sections. The sections are dried in slow ovens for three to four hours. When the garlic has cooled it is ground to the desired consistency, be it granulated or powdered. The finished products are put through sifters to separate any debris or undesirable pieces. Both are packaged in air-tight containers and stored in a cool, dry place. Granulated and powdered garlic are used to season and enhance the flavor of many foods. Often it is an appropriate substitute when fresh garlic is called for in a recipe. Powdered garlic dissolves almost instantly when incorporated into any dish, hot or cold. Granulated garlic takes a few minutes to become incorporated and release its flavor. We can offer Garlic Granules in 0.5mm to 1.0mm, 40/60 mesh, 26/40 mesh - 20 FCL: 10 Mt (Flakes/Cloves), 14-15 Mt (Minced/Granules/Powder) - 40 FCL H/C: 20 Mt (Flakes/Cloves), 25-30 Mt (Minced/Granules/Powder) Product Packing - 12.5/13/14 Kg Paper Bag inside 1 Poly Bag - 20/25 Kg Cartoon inside 1/2 Poly Bag - 20/25 Kg Cartoon inside 1/2 Aluminium Foil Bag Our range includes: - Dehydrated Garlic Flakes/Cloves (5-10mm) - Dehydrated Garlic Minced (1-3mm, 3-5mm) - Dehydrated Garlic Granules (G1, G2, G3) - Dehydrated Garlic Powder (80-100 mesh) -
This CNC machine is used in making jewellery products, shoes sole , eye gears, cases of watch, medical implants. 1) Spindle Speed: 24000 RPM 2) AXIS : 5 Axis(X,Y,Z,A,C). 3) Spindle Power: 2.2 KW 4) Rapid Feed : 8000 mm/min 5) Cutting Speed : 5000 mm/min 6) Automatic Tool Changer 7) Weight : 200 Kg
Advantage: Competitive factory price and superior quality Professional and experienced technology team Focus on high precision CNC machining Consistently meet the tight tolerances required Low MOQ and free sample Short lead time (20 working days) ISO9001:2015 certification and materials accord with Rohs standard Excellent after-sales service and good warranty Our service: Electronic and communication, Aerospace, Optical instrument, Medical and Pharmaceutical, Oil, gas and petroleum, Railway, electric tool, car, robot, hydraulic equipment Equipment: CNC Machining Center, CNC Lathes, CNC Milling Machines, wire cutting, laser cutting Stamping machines, Assembly lines, Whole set of measurement tools Precision Processing: CNC machining, CNC milling and turning, laser cutting, drilling, grinding, bending, stamping, welding, and so on. Drawing format: JPEG,PDF,DWG,DXF,IGS,STEP.CAD or according to your sample Material: Stainless Steel, Brass, Aluminum, Steel, Carbon Steel, Titanium, Plastic. Or other Exotic Alloys Surface Finish: Anodize, Blacken, Polishing, Plating, and Blasting Tolerance: +/- 0.002â??0.20 mm / can also be customized. Inspection: 100% inspection before shipping Payment Terms: 30%T/T in advance, the balance before delivery; Paypal is acceptable Quotations: Drawings (CAD, STP, PDF formats) or Sample Quantities; Materials; tolerance; surface treatment or other special requirements Our engineer can offer technique supports to design or modify drawings according to requirements from customers Lead Time: Sample Lead Time: 3~7 days Production Lead Time: 10~30 days based on different products Shipment time: 7 days with DHL/FEDEX/UPS; 20 days with fast Ocean shipment; 30~45 days with Normal Ocean Shipment Quality Guarantee: We have IQC inspect all raw materials at the incoming department IPQC inspect and measure the machining parts during mass production OQC inspect and measure the finished products according to Drawings and SIP documents with MIL-STD-105E We guarantee that all products/parts comply with drawing and other quality criteria requirements on the contract and approval documents. We will rework all defective products or refund to customers if receive non-good products.
(1). High performance 5 axis CNC center machine controller. (2). The standard spec includes electronic hand wheel. (3). Selection of high -quality casting materials, more compact. (4). 10 tools ATC.ISO20 spindle type, 24000rpm spindle speed. (5). USB/U dis/RS232COM etc many kinds of communication mode, to help users achieve different data transmission and software upgrades easily. (6). Frequency conversion water cooling motor, low noise, high speed and good durability. (7). Perfect self diagnosis function, internal and external status real-time display, alarm immediately when abnormal. (8). Macro variable, macro definition programming, realizing a variety of logical relations. Support macro program with parameters, convenient to the user programming. (9). Can run ISO G code (10). Graphic simulation function: show the graphics of the processing program and the tool path of the actual operation, tool path simulation processing without controlling the operation of the machine , to exam if the preparation process is correct. (11). Multi interface selection: support multi language interface display, automatic fault alarm. Processing information display, processing time, the number. (12). Parameter tabular: Input / output address number setting, only need to fill in the corresponding value in the configuration table. (13).Applicable industry: technology development, advertising design, art, vocational technical college Education & Training CNC and DIY enthusiasts.
AINiCo is composed primarily of Aluminum Nickel Cobalt and also Copper and Titanium. They are manufactured through either casting or sintering process. Cast AINiCo may be manufactured in complex shapes such as horseshoes not possible with other magnet materials. Sintered AINiCo offer slightly lower magnetic properties but better mechanical characteristics. it can be efficiently magnetized in any direction, and for anisotropic AINiComagnet, it generally has greater magnetic capacitive in a preferred orientation than isotropic types. AINiCo is hard and brittle, Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances. â?¢ Advantages of AlNiCo Magnet: 1.Customized designs are available. 2.Max working temperature can be as high as 550�°C. 3.Disadvantage: Br and BH(max)are not as high as rare earth magnet. 4.High energies and relatively low coercivity. 5.High magnetic flux density; low mold charge stable temperature properties; easy to shap.
Samarium Cobalt (SmCo) magnets are made by a sintering process and exist in two forms. The first is Sm1Co5(SmCo 1:5),which has a maximum energy product of between 14 and 24MGOe. The second and more common form is Sm2Co17(SmCo 2:17) which has a maximum energy product of between 22 and 32 MGOe. The main Sm2Co17 alloy is around 35% Samarium (Sm)and 60% Cobalt (Co)with the balance being from varying amounts of lron (Fe) Copper (Cu). Hafnium (Hf) and Zirconium (Zr). Praseodymium (Pr) may also be used. Sm1Co5 is made of only Sm and Co and has excellent corrosion resistance. â?¢ Advantages of SmCo Magnet: 1.Superior resistance to high temperature. 2. Excellent resistance to corrosion, no coating is needed for surface protecting. 3.High working temperature. 4.SmCo is suitable for machines with high magnetic requirements and good for strict working environment requirement.
The spring coiling machine can be applied to the production of compression springs, simple torsion springs, small hook springs, oil seal springs, electronic springs and other precision springs. Union Spring
1.Materials: AL7075 2.Size: hole:diameter: 11mm Width:25.5mm Length: 23mm 3.Surface treatment:grey anodizing 4.Application:precision optical equipemt accessries
