Find Verified 3000 Tons Cement Silo Suppliers, Manufacturers and Wholesalers

Microsilica (silica fume) is a by-product from silicon metal or ferrosilicon industries, is an amorphous silicon dioxide SiO2. This product reacts chemically with the calcium hydroxide in the cement paste which yields a calcium silicate hydrate gel that significantly enhances strength and durability. The super fine microsilica fills the voids between cement particles creating a very dense, less permeable concrete. White Cement advantages: Sustainability: Solar Reflectance Index (SRI): Floors finished with white or pastel color concrete will have a much higher SRI than floors with gray concrete, therefore they will reflect light better, and generate energy savings for the lifetime of the floors. Reduction of Heat Island effect: By constructing buildings with white concrete roofs or light-colored roof tiles, the Heat Island Effect is reduced from surfaces generating less heat and improved reflectivity. Architectural Concrete: White Portland Cement is ideal for decorative concrete and Architectural Concrete applications, Masonry and Cementitious Building Products. A key advantage of using white cement for these applications is that it provides a base color that can be tinted to custom colors to meet any color spectrum demand.

Specification Size : SS-S-M-L Packaging : Carton box @10kg / 20kg Fixed Carbon : 91% Calory : 7500 kcal / kg Total Moisture : 0% Ash Content : 2% One container 40 high cube can load +20 tons

Specification Size : 8cm / 6cm Packaging : Carton box @10kg / 20kg Fixed Carbon : 67% Calory : 6500 kcal / kg Total Moisture : 5,3% Ash Content : 11% One container 40 high cube can load + 27 tons

Specification Size : 8cm / 6cm Packaging : Carton box @10kg / 20kg Fixed Carbon : 67% Calory : 6500 kcal / kg Total Moisture : 5,3% Ash Content : 11% One container 40 high cube can load + 27 tons

Specification Size : 4cm / 4cm Packaging : Carton box @10kg / 20kg Fixed Carbon : 67% Calory : 6500 kcal / kg Total Moisture : 5,3% Ash Content : 11% One container 40 high cube can load +27 tons

Specification Size : 10cm / 20cm Packaging : Carton box @10kg / 20kg Fixed Carbon : 67% Calory : 6500 kcal / kg Total Moisture : 5,3% Ash Content : 11% One container 40 high cube can load + 27 tons

Specification Size : 5cm - 20cm Packaging : PP bag @20kg Fixed Carbon : 67,1% Calory : 7000 kcal / kg Total Moisture : 2,9% Ash Content : 3,7% One container 40 high cube can load + 19 tons

Dear clients, Hydolys Group is selling high quality Cement that is directly sourced from the best factory. We ensure that each batch meets the highest standards of quality. Thanks to a long-standing collaboration with the cement plant, we are able to offer you very competitive prices, with particularly attractive discounts. Do not hesitate to contact us for more information on chemical specificities and physical and mechanical properties. With extensive experience in government and business services, we will be happy to assist you in your projects. General Information : - Packaging : 50 Kg bags - Quantity : up to 500 000 MT - Price : 65$ / MT FOB - Destination : CIF Any Safe World Port - Shipment : First Shipment in 30-45 Days and Rest in Every 30 Days after Receipt of Payment Instrument to the Sellerâ??s Bank. - Payment : by Irrevocable, Transferable Confirmed DLC 100% Payment at Sight for total Quantity from Top Western Prime Bank. - Inspection : S.G.S Inspection for Quality and Quantity Service at Sellerâ??s Cost at Place of Loading. Why work with us? - Direct Cement Factory Access : Eliminating intermediaries for the best prices. - High Volume Capacity : Designed to support your large-scale operations. - Tailored Solutions : Flexible contracts for spot purchases or long-term supply agreements. - Efficient Supply Chain and Delivery : Our logistics network ensures reliable and timely delivery to any ASWP. It would be a great opportunity to connect directly, either via email or WhatsApp, not only to discuss pricing and payment terms but also to better understand your specific needs. This will enable me to provide the most suitable solutions and tailor my offer accordingly. Looking forward to hearing from you soon and starting a fruitful collaboration. Contact Information : - Email : contact@hydolysgroup.com - Email : huguesdohy@hydolysgroup.com - Whatsapp : +33 06 47 19 22 95 ================================ OTHER PRODUCTS ================================ Metals & Non-Ferrous : - Copper Cathodes - Copper Powder - Copper Ingot - Thermal Coal - Gold - Nickel - Iron Ore - Cobalt - Chrome - Magnetite - Antimony - Flourite - Manganese - Lead - Tin - Aluminium Oil & Gas : - Crude Oil - Diesel - Jet Fuel Agricultural : - Cocoa - Coffee - Arabic Gum - Black Pepper - Spices Other : - Cement - Iron Pipes

POP PLASTER OF PARIS CEMENT Our gypsum plaster powder are widely used in kinds of gypsum products: Medical industry, gypsum board , gypsum ceiling board , plaster moulding , gypsum cornice , gypsum ceiling tiles , gypsum bricks , plaster figurines , plaster figurines , gypsum decor , plaster pillar , gypsum wall panel , DIY gypsum products etc.. Model Number: gypsum powder 01 Product Name: gypsum powder Quality: Top fineness(%): 2.05 Initia Coagulation: 7.60 Final Coagulation: 9.16 2h rupture strength: 7.98 Drying compressive strength: 61.22 Whiteness: 95.30 crystal water(%): 5.77 Supply Capasity: 1000 - 500,000 Tons Packaging : 25kg , 40kg, 50 Kg / bags Available Forms : powder

We offer 200 tons per month of tire wire scrap from combustion of used tires. Material has no rubber left. Tire wire is loaded loose in 20' containers (28 tons each).

We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.

Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details

The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.

The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.

We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us

Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.

We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag : 1. >85% Fe Average 600mm Max Fraction 2. >78% Fe Average 20-300mm Fraction The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact