With h.264 compression, smaller stream, higher quality, longer recording time. 16ch support 16ch d1 playback at the same time With unique front panel and time screen, 16ch support 16 d1 @25fps video recording. Support symbian s60v3/v5, windows mobile, iphone, android, blackberry mobile view. Support 1sata hdd ( 3tb), 2 usb(2.0) interface for backup, burning, upgrading operation Stronger network service, support ie browse and cms software Support chinese, russian, english, italian, portuguese, spanish, french, german ..... . 30 language Build-in 3322.Org, dyndns.Net, oray.Net and myq-see.Com free ddns dynamic domain name> with hdmi, support 1080p the high-definition (1920 * 1080p) With hvr, nvr function, support 4*1080p/8*720p/24*d1 ip camera Support p2p function 370(width)*315(deep)*55(hight)mm 4kg(not including hdd)
Compression format:Video:H.264 baseline Compression & Audio: G.726 8K/16k bit ADPCM mono Video Input:4 ch. BNC Audio Input:4 ch. RCA Video Input:1 Ch.BNC Audio Input:1 Ch.RCA VGA output:yes Recording mode:manaual/schedule/sensor trigger/motion detection/Power-on auto record DVDRW support:no Sensors, alarm:4 Input,1output Network interface:1RJ45 10/100 mbps ethernet connector Media backup:USB flash disk,Network PTZ control:RSS-485 IR remote control unit:yes USB mouse:yes Operating temprature:5deg.C +40deg.C Power supply:DC12V Dimensions:315(W) x 224(D) x 52(H) mm
SFP, XFP, X2, xenpak transceiver, CWDM, DWDM transceiver, converter, mux demux.
Long Pulse Single Frequency PM Fiber Amplifiers for DWDM transmission system We will try our best to provide products similar to keopsys fiber amplifier like CEFA-C-WDM-LP fiber amplifier and CVFA fiber amplifier, NKT Photonics fiber amplifier like X15/E15/C15/Y10 signal-frequency lasers, NP Photonics fiber amplifier like the Rock Fiber Laser Module and the Rock Table- Top Fiber Laser Source, IPG Photonics fiber amplifier like GLR CW green fiber laser, VLM visible fiber laser and Yeetrbium CW fiber laser, and BKtel Photonics fiber amplifier. You probably see us at following exhibitions: SPIE Photonics West in USA, Photonica in Russia, OPTO Taiwan, LASYS in Germany, OPIE in Japan and so on. Parameter unit Specification Min Typ. Max Part No CKLIA-1550-M-SF-LP Center wavelength nm 1540 1550 1565 Peak power W - - 500 Pulse energy uJ 100 Pulse width ns 200 Repetition rate kHz 20 Output average power W 2.0 - - Beam quality M2 1.3 1.5 Output power stability1 ï¼?8hoursï¼? % - 1 2 Output isolation dB 35 - - SMSR dB 20 35 Input signal average power uW 30 100 Power supply VDC 24 Operating temperature -35 - 65 Storage temperature -40 - 85 Output fiber type PLMA-GDF-25/300-M Core NA 0.09 Output fiber length m >0.3 Output fiber connector FC/APC or collimator 3-port circulator On request Dimension mm 300(L)X170(W)X25(H) 1. The output power stability is measured under 25ï¼?30 minutes after warm-up; 2. For more information about integrated 3-Port Optical Circulator, please contact with us
GLsun's DWDM-SFP25G-10-C17-T02 single-mode transceiver is SFP28 25G DWDM 10KM transceiver for duplex optical data communications support up to 25.78Gb/s. It is with the SFP+ 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I C. It has built-in clock and data recovery (CDR). This module is designed for single-mode fiber. Compatible Cisco Form Factor SFP28 Max Data Rate 25.78Gb/s Wavelength 1563.86nm~1528.77nm Max Cable Distance 10km Connector Duplex LC Transmitter Type 1563.86nm EML Extinction Ratio 3.5dB Media SMF Power Consumption
DFB Light Source/Hoyatek tunable DWDM 100mW Features: high output power excellent power stability and wavelength stability itu-t recommended standard channel channel space 25/50/100ghz provide half a custom processing Applications: optical component produce and testing optical communication system testing fiber sensing system hfc network catv network
Features: High stability High output power Alarm automatic Remote control available Output power tunable (optional) Module or bench-top (optional) Applications: Fiber sensing system light source Fiber sensor(fbg, f-p)testing Fbg, dwdm, filter testing Optical passive component testing Fiber testing instrument Fiber sensing&communication experiment Medical field
Features: Xaui electrical interface: 4 lanes @ 3.125gbit/s Hot z-pluggable Sc-duplex optical receptacle Mdio, dom support Cooled dwdm eml Apd photo-detector Operating case temperature: 0 to 70°c Compliant to ieee 802.3ae 10gbase-zr application Compliant to xenpak msa 3.0 Mechanical footprint: 4.76 x 1.42 x 0.46" Reference: Ieee 802.3ae as 10gbase-zr, xenpak msa release 3.0
DWDM Module can solve the shortage of fiber resources and transparent transmission of business, and reduce the cost of network Construction. With low-cost and compact dimension, it is mainly used in metropolitan area network and access layer, also be used to build networks.
DWDM can realize the multiplexing and demultiplexing between two communication channel, and available on ITU channel spacing of 100 GHz. It can expand the capacity of single fiber to achieve bidirectional communication, which can widely used in optical network upgrade and expansion, or introduce new comprehensive business etc.
Fiber optic splitters and couplers are used to split or combine optical signals in various kinds of networks Common applications of splitters and coupler are: system monitoring, fiber to the home, network redundancy, laser splitting Features: Single and multiples mode are available Industry standard and custom housing available Variety of connectors available 1 x 2, 1 x 4 and 1 x n custom couplers configurations available Low insertion loss Environmentally stable Specifications: Operation wavelength: 850nm or 1,310nm or 1,550nm, others on request Thermal stability: í_0.1dB over -10 to 85íµ Operating temperature: -10 to 85íµ/-20 to 70íµ/-20 to 70íµ Applications: Optical communication system Optical testing system Optical fiber sensor Optical power distributor
Cwdm, dwdm, 10g40g100g200g transponder, olp, edfa, obp, dcf, passive cwdm mux demux, awg, transceiver.Shipping
Features Wide pass band Low insertion loss High stability and reliability High channel isolation Epoxy-free on optical path 100 x 80 x 10 ( 2 ch~8ch) 140*100*15 (9 ch~18ch))
Features Wide pass band Low insertion loss High stability and reliability High channel isolation Epoxy-free on optical path 100 x 80 x 10 ( 2 ch~8ch) 140*100*15 (9 ch~18ch))
Optical transceivers, sfp, 10g sfp+, 25g sfp28, 40g qsfp+, 100g qsfp28 , 400g qsfp dd, direct attach cables (dac), active optical cables (AOC), ethernet media converter, fiber optical patchcord, bwdm, cwdm, dwdm mux/demux and 100g repeater products..
SFP transceivers, GBIC transceivers, BIDI transceivers, X2 Transceivers, XENPAK transceivers, XFP transceivers, CWDM transceivers, DWDM transceivers, PON, MUX/DEMUX, serial interface cable, fiber patch cable, optical transceiver, fiber transceivers.
Features - Full-duplex active optical cable - Up to 10.3125Gb/s per channel - Hot-pluggable SFP+ MSA-compliant connectors - 1W maximum power dissipation per end - Built-in digital diagnostic functions - Commercial operating case temperature range: 0 to 70�°C - RoHS-6 compliant (lead free) Applications - High performance computing interconnect - 10G Ethernet interconnect
Features - Transmission data rate up to 25.78Gbps - 850nm VCSEL laser - PIN photo-detector - Internal CDR on both transmitter and receiver channels - Low power consumption < 1W - Hot-pluggable SFP28 form factor - Up to 70m on OM3 MMF and 100m on OM4 MMF - Digital diagnostics functions are available (optional) - Operating case temperature range 0�°C to +70�°C - 3.3V power supply voltage - RoHS-6 compliant Applications - IEEE 802.3by 25GBASE-SR
Features - QSFP MSA compliant - Four independent full-duplex channels - Supports 103.1Gb/s aggregate bit rate - Up to 100m OM4 MMF transmission - Operating case temperature: 0 to 70ï?°C - 4x25G electrical interface (OIF CEI-28G-VSR) - Single 3.3V power supply - Maximum power consumption 2.5W each terminal - RoHS-6 compliant Applications - 100G Ethernet - Infiniband EDR
Features - QSFP28 End: Compliant with QSFP28 MSA specifications - SFP28 End: Compliant with SFP28 MSA specifications - 4 independent duplex channels operating at 25Gbps - AC coupled inputs and outputs - 100 Ohm differential impedance - All-metal housing for superior EMI performance - Single power supply 3.3V, low power consumption - RoHS Compliance - Operating temperature range: 0ï?°C to 70ï?°C. Application - 100Gigabit Ethernet - Infiniband EDR - Serial Data Transmission - Networking - Storage - Fiber Channel
