Model ak-rfm004 This 4 antenna port uhf rfid module is equipped with impinj r2000 chip, it could work in long range reading uhf rfid Reader. We could provide api customer port, and standard sdk. It will help you develop the right rfid device to meet whole System quickly. Specification: Size: 69mm x 43mm x 10.50mm (l*w*h) Weight: 50g Power consumption: 1.5a peak Working tempreture: from -20 Stocking tempreture: from -40 Physical port: 1 x mmcx, rf connector, 15pin connector(electricy source, communication, gpio) Working frequency: ultra high frequency (840-960mhz), defauty frequency (920-925mhz), the frequency could be customized for different country. Click to make an enquiry 50g/pc
JMY501 series are RFID reader/writer module with UART and IIC serial ports. JMY501 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is separate design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module's performance and stability. Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm(depending on card and antenna design) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default OFF EEPROM: 512Bytes Interface: IIC & UART (selected by SPS pin, recommend to use IIC) Communication rate: IIC--400Kbps, UART--19200bps/115200bps Max.command length: 511 Bytes Interface level: 3.3V (TTL level; 5V tolerance) Power supply: DC5V Power consumption: 70mA Dimension: 42mm¡Á21mm¡Á8mm Package: DIP32 Weight: about 15g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF ISP: Supported RoHS: Compliant 30 pcs per box, box size: 16cm*12cm*5cm.
Main feactures: 1. Compatible with other access control system. 2. With standard wiegand output signal . 3. With oled display , buzzer and led lights 4. Built-in watch dog funtion 5. Oled display is programmable , allows users to edit the text via 2 different input interfaces . 6. Built-in buzzer for sound indicator , the length and times of the sound are programmable . 7. Suitable for the parking system when the rf siganl was cuted off . 8. Built -in perpetual calendar , can be set on the card reader directly. 9. Built-in doorbell button . Dimension: 95, 95, 21, mm operating voltage: dc9-15v Consume power: less than 1 w operating current : 120 ma Card type : 125khz em id card read range: 60(mm) Output format : wg26/wg34 cable distance : 150m Tranmit rate : 1bit/ms reading tips : buzzer / oled display Keypad output :4bits/8bits weight: 115g Color:white/black material : pc +ab, lens: pmma Operating temp: -30íµ +65íµ
Capacity: 4GB Extreme IV CF CARD Designed to meet the critical speed and performance needs of serious professional photographers. Significantly improved workflow efficiency for capturing, viewing, upload and transferring large image files Ideal for demanding photo shoots under severe weather conditions-heat, cold, wind, rain, snow, etc. Built to perform in the most extreme environments and temperatures- -13?F to 185?F -25?C to 85?C sequential read and write (leveraging the new Extreme FireWire Reader) Durable, reliable and thoroughly tested-temperature tested (heat and cold); shock and vibration tested Data recovery software-ensures your photos will always be there (even if you them accidentally) Dedicated, priority technical support hotline for direct customers of SanDisk Extreme products Included travel case keeps your memory cards organized. Delivering and quality gurantee: All the goods will be delivered by ems, because this is a very safe express dilivery.We will provide one year free maintenance for all the cards we sell. mini case
Description SAAT-F805S reader base on Impinj R2000 RFID chip, operates in UHF frequency band, with long distance reading, high reading accuracy, massive functions, high reliability, and strong expandability. Main feature UHF (840-920MHz) band, customize the local RF band (optional) Build in Linux OS, POE optional Base on Impinj R2000 RFID chip, read>200tag/second Support standard RS-232, USB2.0 , Ethernet communication interfaces Multi-group I/O ports(GPIO), to control the functional mode of the reader/writer Super anti-collision, with special designs to eliminate interfering 4 SMA Connector, connect 4 antennas outside
Act-a6 series motorized card reader/writer supports rf/ic card r/w and magnetic card r, which is a product created from many years of technology and experience accumulation of act and the market demand. Act-a6 is designed based on the development concept that integrates multiple functions. Careful material selection, rational structure and stable circuit design make it a highly reliable product, meanwhile, its bezel is designed with a user-friendly led; all these enable act-a6 to better meet the market requirements for motorized card reader/writer.
Product Description CJT-F2 card collecting machine reserves installation space for antenna board of RF card reader, which is capable of extending RF card reading function. Fine wearable and anti-corrosive rubber material and metal support are adopted, which can effectively prevent RF module from being interfered by metals. The product is extensively used in parking lot systems and sight spots, etc. Product Features *Unique dispensing wheel design: effectively prevents from dust accumulation and itâ??s capable of self-cleaning. *Extension-hole positions: are reserved for installation of RF module and scanning module. *Wearable and anti-corrosive rubber material and metal support: are adopted, which can effectively prevent RF module from being interfered by metals. *Multiple levels of sensor circuit protection: prevents optical interference. *Supports online upgrade program. CUSTOMIZABLE We can make products according to your needs.
Product Description CJT-A6 series motorized card reader/writer supports RF/IC card R/W and magnetic card R, which is a product created from many years of technology and experience accumulation of ACT and the market demand. CJT-A6 is designed based on the development concept that integrates multiple functions. Careful material selection, rational structure and stable circuit design make it a highly reliable product, meanwhile, its bezel is designed with a user-friendly LED; all these enable CJT-A6 to better meet the market requirements for motorized card reader/writer. Product Features *EMV and PBOC certified. *Supports ISO7810/7811 magnetic card reading only. *Supports ISO7816-2 contact IC card reading/writing. *Supports ISO14443-A Mifare Type A/B card reading/writing. *Jitter card-in function: effectively precludes unauthorized card reading. *Protruding bezel: for anti-theft is available *Bezel with LED light: provides card insertion indication and/or lighting and prevents the card being left inside. *Independent sensor design: makes reader maintenance easy. *Dustproof sensor lens: prevents sensor from dust and/or the other foreign materials. *Mechanical shutter for protection against dust and/or the other foreign materials in the bezel position: enhances the reliability of the card reader. *Four-set driving wheels: ensure the card transmission stability and liability and prevent card jam or block. *One group of driving wheels in front of mag-head: enables automatic re-reading, which increases success rate of card reading. *Card detecting function: automatically handles abnormal cards (broken card, incomplete card, etc.) and is able to eject card in case of power failure. *Self-balancing mag-head reading function: provides stable reading and easy maintenance. *High-performance plastic materials: ensure reading precision and product consistency. CUSTOMIZABLE We can make products according to your needs.
Product Description F5009N long-range UHF RFID Integrated Reader is a high-performance reader/writer designed for high challenging RFID application environment. It employs our high efficient M2101 RF module, special designed circular polarization antenna and integrates with interfaces of RS232, RS485 and Ethernet, which can realize a max reading distance of 40m. It owns a superior multi-tags reading rate and can achieve a tag identification rate of 400tags/s or above. F5009N adopts ABS industrial plastic case. It is waterproof, dustproof and has excellent anti-interference and lightning protection capability. Product Advantage 1.up to -82dbm receiving sensitivity and the highest performance in this field makes this module more suitable for harsh application environment. 2.High stability and reliability, 60*24 hours high temperature of workstation, can work stably and continuous. 3.Remarkable performance, can achieve a reading distance over 40m for single tag reading. 4.Remarkable performance in intensive tags reading, can attain a tags identification rate of 400tags/s. 5.Provide the most comprehensive functions SDK and ports, easy to integrate RFID software. 6.Adopted integrating RF chip, module performance is more stable, and more suitable for harsh application environment. 7.The use of carrier wave cancellation technology makes the tags reading more accurate and reading scope wider. 8. Enhanced noise suppression function for reliable data capturing. 9. High precision return signal strength (RSSI). 10. Excellent performance of anti-interference and lightning-proof design. 11. ABS industrial plastic case, rugged and durable. 12. Waterproof and dustproof, production grade is IP68
Product Description F5006L long-range UHF RFID Integrated Reader is a high-performance reader/writer designed for high challenging RFID application environment. It employs our high efficient M2100 RF module, special designed circular polarization antenna and integrates with interfaces of RS232, RS485 and Ethernet, which can realize a max reading distance of 7m. It owns a superior multi-tags reading rate and can achieve a tag identification rate of 200tags/s or above. F5006L adopts ABS industrial plastic case. It is waterproof, dustproof and has excellent anti-interference and lightning protection capability. Product Advantage 1. up to -62dbm receiving sensitivity and the highest performance in this field makes this module more suitable for harsh application environment. 2. High stability and reliability, 60*24 hours high temperature of workstation, can work stably and continuous. 3. Remarkable performance, can achieve a reading distance over 7m for single tag reading. 4. Remarkable performance in intensive tags reading, can attain a tags identification rate of 200tags/s. 5. Provide the most comprehensive functions SDK and ports, easy to integrate RFID software. 6. Adopted integrating RF chip, module performance is more stable, and more3 suitable for harsh application environment. 7. The use of carrier wave cancellation technology makes the tags reading more accurate and reading scope wider. 8. Enhanced noise suppression function for reliable data capturing. 9. High precision return signal strength (RSSI). 10. Excellent performance of anti-interference and lightning-proof design. 11. ABS industrial plastic case, rugged and durable. 12. Waterproof and dustproof, production grade is IP68
Typical Applications: Intelligent transportation management; Asset identification, tracking and checking management; Orientation, tracking and checking people in coal mine etc.; Position monitor management for baby, prisoner, older psychotic etc.. Technology specifications Operating frequency 2.4GHz~2.5GHz ISM Antenna Connect 1 antenna through SMA RF power range -30dBm~0.0dBm( adjusted by 32 grade ) Receiving sensitivity -90.0dBm Operating mode Fixed frequency Modulation GFSK Reading range â?? 0~100m (depend on different gain omni-directional antenna,) â?? RSSI active reader can be adjusted less than 10m Anti-collision Up to 500 tags read simultaneously Communication speed 250kbps, 1Mbps, 2Mbps(adjustable) Communication interface RS-232, RS-485, Wiegand26/34/42/50, Ethernet Input and output 2 input, 2 output Power supply AC input: 100~240V, 50/60Hz 1.2A DC output: 5V/1A Product size 208mm�?125mm�?35mm(L�?W�?H)2 Gross weight 2.2kg Net weight 1.9kg Working temperature -20â??~+70â?? Storage temperature -40â??~+85â?? Accessories Standard matched antenna, Power adapter, Power cable, RS-232 cable, USB cable, Ethernet cable Working status indication Buzzer, LED indicator
Item: Hybrid Smart Card Frequency: UHF+HF,HF+LF,UHF+LF, or UHF+HF+LF; Card size: 86x54mm (Customized Availableï¼? Antenna size: It depends on chip. Thickness: 0.80+/-0.04mm(HF&UHF),0.88+/-0.04mm(LF) Material: PVC/PET ISO: ISO7816 Printable: Printable with offset, silkscreen, personalizing on the PVC; Feature: Waterproof Read Range: 0~75px(Depends on reader) UHF smart Card Working Temp: " -20°C to 50°C" Chip optional: "LF:EM4200/TK4100/T5577/HID,etc HF:NXPS20/ntag203/ultralight/ultralight C/S50/S70/ICode2/ICODE-S/Desfire series,etc UHF :Alien H3&Monza4 Additional Crafts Injet/thermal/laser/barcode/QR code printed UID numbers or serial numbers; Mag-stripe at backside(300oe/2750 oe/4000 oe) Signature panel (White, grey and transparent) counterfeiting technology(encoding, hologram, water mark, micro-text, etc) Silver/golden metallic background Others (embossing, gold/silver blocking, epoxy, etc) Smart Card Production Package Packing into opp bags, 200pcs/inner box,10boxes/carton; Box's size:21x9x150px,Carton's size:50x25x12CM Net/Gross Weight: 13/13.3KGS per carton;
24C16 CONTACT CARD Specifications Card Size: 86x54mm (Customized Available) Chip: 24C16 Antenna size: 75x45mm Thickness: 0.80+/-0.04mm(HF&UHF) Material: PVC/PET ISO: ISO7816 Printable: Printable with offset, silkscreen, personalizing on the PVC/PET; Feature: Waterproof Read Range: 3cm(Depends on reader) Contact Smart Card Additional Crafts Injet/thermal/laser/barcode/QR code printed UID numbers or serial numbers; Mag-stripe at backside(300oe/2750 oe/4000 oe) Signature panel (White, grey and clear) counterfeiting technology(encoding, hologram, water mark, micro-text, etc) Silver/golden metallic background Others (embossing, gold/silver blocking, epoxy, etc) Production Package Packing into opp bags, 200pcs/inner box,10boxes/carton; Box's size:21x9x6cm,Carton's size:50x25x12CM Net/Gross Weight: 13/13.3KGS per carton; Applications access control solution card Parking lot NFC Payment Hotel Door Lock Transpotation Highway Toll Membership Identify Card Bank Card
Specifications Product Name: access control system smart card Card size: 86x54mm (Customized Availableï¼? Antenna size: 75x45mm(HF)/dia45mm(LF)/UHF(Alien9662 inlay) Thickness: 0.80+/-0.04mm(HF&UHF),0.88+/-0.04mm(LF) Material: PVC/PET ISO: ISO7816 Printable: Printable with offset, silkscreen, personalizing on the PVC; Feature: Waterproof Read Range: 0~75px(Depends on reader) Contactless Smart Card Working Temp: " -20°C to 50°C" Chip optional: "LF:EM4200/TK4100/T5577/HID,etc HF:NXPS20/ntag203/ultralight/ultralight C/S50/S70/ICode2/ICODE-S/Desfire series,etc UHF :Alien H3&Monza4 Additional Crafts Injet/thermal/laser/barcode/QR code printed UID numbers or serial numbers; Mag-stripe at backside(300oe/2750 oe/4000 oe) Signature panel (White, grey and transparent) counterfeiting technology(encoding, hologram, water mark, micro-text, etc) Silver/golden metallic background Others (embossing, gold/silver blocking, epoxy, etc) access control solution card Production Package Packing into opp bags, 200pcs/inner box,10boxes/carton; Box's size:21x9x150px,Carton's size:50x25x12CM Net/Gross Weight: 13/13.3KGS per carton;
Smart Card Custom NXP MIFARE 1K CARD Specifications Product Name: Smart Card Card size: 86x54mm (Customized Availableï¼? Antenna size: 75x45mm(HF)/dia45mm(LF)/UHF(Alien9662 inlay) Thickness: 0.80+/-0.04mm(HF&UHF),0.88+/-0.04mm(LF) Material: PVC/PET ISO: ISO7816 Printable: Printable with offset, silkscreen, personalizing on the PVC; Feature: Waterproof Read Range: 0~75px(Depends on reader) Working Temp: " -20°C to 50°C" Chip optional: "LF:EM4200/TK4100/T5577/HID,etc HF:NXPS20/ntag203/ultralight/ultralight C/S50/S70/ICode2/ICODE-S/Desfire series,etc UHF :Alien H3&Monza4 Contactless Smart Card Additional Crafts Injet/thermal/laser/barcode/QR code printed UID numbers or serial numbers; Mag-stripe at backside(300oe/2750 oe/4000 oe) Signature panel (White, grey and transparent) counterfeiting technology(encoding, hologram, water mark, micro-text, etc) Silver/golden metallic background Others (embossing, gold/silver blocking, epoxy, etc) Production Package Packing into opp bags, 200pcs/inner box,10boxes/carton; Box's size:21x9x150px,Carton's size:50x25x12CM Net/Gross Weight: 13/13.3KGS per carton; Applications access control solution card Parking lot NFC Payment Hotel Door Lock Transpotation Highway Toll Membership
Features Android 7.0 operating system MSM 4 core CPU, 1.2GHZ; RAM: 1G; Flash: 8G IP65/Drop resistance from 1.2m 4 inch IPS LCD screen 4G, WI-FI, Bluetooth, GPS  Physical keypad on Android 1D CCD barcode scan, 1D laser barcode scan, 2D barcode scan RFID reading function: LF/HF/UHF RFID Reader High resolution fingerprint function Fast built-in Printer Pistol and docking station design Dual-battery System Applications Logistics Medical Treatment Electrical Power Gas Inspection Purchasing Fair Specifications Standard Parts General Specifications Operating system Android 4.4 embedded OS CPU 1.2GHz RAM RAM 1G; FLASH 8G Ports One USB 2.0 port(OTG supports U Flash Disk, Mouse, 100M ethenet), one charging mouth, one TF card(128G), one SIM card Protection Grade Industrial ProtectionGrade IP65 Drop Grade Drop resistance from 1.2m Wireless Communication Bluetooth V4.0 GPS Built-in Beidou/GPS/GLONASS; supports A-GPS; External Beidou/GPS/GLONASS; supports RTCM 2.3 differential data WIFI Support IEEE 802.11b/g/n 4G FDD/WCDMA/GSM LTE_FDD B1/B3/B7  LTE_TDD B41/B40  WCDMA B1//B2/B5  GSM 900/1800/1900 Data Acquisition (Optional) NFC (HF) RFID: Working frequency: 13.56MHZ Profile: Support ISO/IEC 15693, ISO/IEC 14443A profile Support Cards: SR176, SRIX4K (TYPE-B), I- Code2, TI RFID label-it HF-I, EM4034, Mifare Classic ETC Identification distance: not more than 5cm UHF RFID: Working frequency: 840-960MHz(customization of requiredfrequency band) Support agreement: EPC C1 GEN2/ISO 18000-6C /ISO18000-6B Output power: 10dBm-30dBm Identification distance: not more than 6m ACTIVE RFID: Operating frequency 2.4GHz~2.5GHz ISM RF power range -30dBm~0.0dBm( adjusted by 32 grade ) Receiving sensitivity -90.0dBm Reading range: 0~60m (Adjustable depending on different gain omni-directional antenna,) Anti-collision: Up to 500 tags read simultaneously Communication speed:250kbps, 1Mbps, 2Mbps(adjustable) Physical Layer Parameter Display Screen 4 inch LCD screen, 480x800 IPS screen, capacitive touch screen Touch screen Thicken tempered glass(thickness 1mm); supports 10 points touch and double-click for waking up Keyboard Physical keypad with 19 phiscal keys Camera 8.0 million pixels; support auto focus and fill-flash function. Headset Supports standard headset, Bluetooth headset; support Mike and receiver function Vibration Function Vibrating prompt function Sensor Supports light sensation, gyroscope, compass, gravity Flashlight Function Used for emergency lighting Rechargeable LithiumBattery 3.7V, 3800mAh Handle Battery 3.7V, 5000mAh Standby The standby current is less than 10mA Dimension 168mm*75mm*26mm Weight 350g Environmental characteristics Working Temperature -20 ~ +50 Storage Temperature -40 ~ +60 Humidity 5%-95% relative humidity; no condensation
IC/RF ID/magnetic cards and card reader, automatic card dispenser, loop detector, card collector, tickets transport machine, micro printer, barrier gate, parking guidance system.
Application Intelligent card parking system Auto ticket vending machine High-way card dispensing system Functions Industrial design, compact structure, simple and reliable control interface Good resistance to abrasion and corrosion,fit for high and low temperature environments. Simulation manpower friction card issuers ,better adaptability to various deformed cards Watchdog of hardware and micro-embedded real-time operating system to ensure reliable operation Pre-dispense function accelerate dispensing speed Direct connectivity to inductor Automatic buzzer alarm when fewer cards, no cards or failure Provide RS232 and I / O voltage two control interface Card recycling capacity is 40pcs, automatic buzzer alarm when cards warehouse is full Automatic reset: after the wrong alarm 30 or 100 seconds Adjustable capacity of Card warehouse Card thickness: 0.2mm-1.5mm (adjustable) ((Ex-work setting: 0.8mm) Motherboard slip design makes the installation and removal simple, convenient&fast Die-wide production ensure the products quality and consistency Technical data Operating Voltage: 24VDC (MAX current 2A, static current 0.1A) Operating temperature: -20 to 80 Operating relative humidity: 30%-90% Used condition: installed in bin Card Material: all kinds of paper cards and PVC / mylar cards N. W: 3.5Kg ( Include cards pressure block) Card dispensing speed: about 0.5s Card capacity: 150pcs (According to card thickness: 0.8mm/pcs) Adding a lengthen box can add the card capacity Applicative Card Jaws Mode K6 ,installed on control plate , With waterproof and anti-insert functions Mode K3 ,installed on control plate Mode K5 ,installed on card dispenser
Functions & features 1. Manual release device to operate the barrier when power failur 2. Barrier motor with die-casting aluminum alloy is high-hermetic and easy for heat dissipation 3. Motor cooling fan to avoid the over-heating possibility 4. Automatic reversing when the barrier boom meets the obstruction 5. Auto closing realization through menu setting on the control panel 6. The barrier works well with infrared photocells, loop detectors, card readers, ticket dispensers, manual switch(wire control), Traffic light 7. Rs485 communication module is compatible Technical data Electronic box working temperature:-40â??ï½?+75â?? Power: 220vâ±10%, 110vâ±10%, 50/60hz Rated power: 120w Relative humidity: â?¤90% Remote control distance: â?¥30m Net weight: 60kgs Speed: 1s, 3s, 6s
The card features a graphics quality surface optimized for photo ID printing, and is available in standard PVC construction, or a composite polyester/PVC construction for more demanding high wear and tear environments. 26 Bit Format Cards - Requires that a facility code and card start number are specified by the customer when placing an order. The customer is responsible for all tracking and management of card numbers. HID Card Feature RF-programmabl Universal compatibility with HID prox readers External number provides easy control and identification Meets ISO standards for card thin May be used with all direct image or thermal transfer card printers Extremely consistent read range Conveniently fits into a purse or wallet May include a vertical or horizontal slot punch to accomodate a strap and clip when used as a photo ID badge System administration is made easy with a cross-reference list correlating the external card number and the programmed ID number Over 137 billion unique codes Durable, strong, flexilble and resistant to cracking and breaking Technical parameters 125 kHz proximity Locations for vertical and horizontal card slots This is a printable surface card Our HID Prox Card/FOB prices include programming Select 26 bit H10301 or 37 bit H10302 format Card configuration is LGGMN (blank front and back); LGGSN and LGSMN configurations are also available
