12V 50Ah Lifepo4 Battery With Abs Case Suppliers and Manufacturers

The Dry Battery PTZ7L - 12V - 7Ah is a Valve Regulated Lead Acid sealed lead acid battery (referred to as VRLA) designed by AGM technology. AGM technology uses an Absorbed Glass Mat as a barrier; the electrolyte solution is absorbed at the plate, and the diaphragm is faster. Lead alloy composition and special additives suitable for starting purposes Advanced technology with an acid-free regulator valve, safe for users and vehicles. Outstanding advantages of the Dong Nai Maintenance-Free Dry Battery (VRLA) PTZ7A (12Vâ??7Ah) Specially designed for motorcycles. The most advanced technology for high performance, increased battery start-up, and service life Completely free of maintenance during use. Anti-shake design, suitable for all different terrain conditions.

The Dry Battery PTZ7L - 12V - 7Ah is a Valve Regulated Lead Acid sealed lead acid battery (referred to as VRLA) designed by AGM technology. AGM technology uses an Absorbed Glass Mat as a barrier; the electrolyte solution is absorbed at the plate, and the diaphragm is faster. Lead alloy composition and special additives suitable for starting purposes Advanced technology with an acid-free regulator valve, safe for users and vehicles. Outstanding advantages of the Dong Nai Maintenance-Free Dry Battery (VRLA) PTZ7A (12Vâ??7Ah) Specially designed for motorcycles. The most advanced technology for high performance, increased battery start-up, and service life Completely free of maintenance during use. Anti-shake design, suitable for all different terrain conditions.

HIPS Regrind from post consumer materials Thermoplastic PS has two representatives as GPPS and HIPS resin. In particular, PS HIPS plastic is more popular thanks to many advantages and applications. PS HIPS belongs to the group of hard, transparent resins that are easy to color, machined by suction lamination method and easy injection technology. Common HIPS applications: In packaging technology, it is used as a single-layer packaging for products that do not require strict antioxidant requirements. Make coating HIPS plastic film to increase water vapor and gas resistance. Making a printing surface to increase printing ability, making the outer plastic packaging with the ability to tear easily and create gloss. Making bottle caps, pen cases, jewelry boxes, beer tanks, fresh food containers. Making pharmaceutical bottles, pipes, cap for solvent containers. Making high-frequency insulating materials, insulation clamps. Making imitation leather sandals, textile packaging. Pressing students' tables and chairs, pressed motorcycle details, yogurt cup, plastic candy tray. MATERIAL: HIPS Regrind from post consumer materials ,Yes No Fr, NO pc abs, no iron, no circuit etc CATEGORY: HIPS TYPE: Regrind SPECIFICATION: Hips from post consumer materials.Yes No Fr, NO pc abs, no iron, no circuit etc. Hips per month 52 mt Origin: Bangladesh LOADING WEIGHT: 24 Ton FOB (USD/Ton): 650$ - 850$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days

Basic Info. Model NO. PST120-12 Installation Packaged Rechargeable Chargeable Color Ivory White Weight 34.5kg Terminal Cooper Case ABS Separator AGM Plate Flat Plate Maintenance Free Sealed Type Glue Sealing Transport Package Carton Then Pallet Specification 407*174*209mm Trademark PUSTUN Origin China HS Code 8507200000 Production Capacity 600PCS/Day Product Description We produce VRLA/SLA Battery, Industrial Battery, 12V Battery, Rechargeable Battery, Gel Battery, Deep Cycle Battery, sealed lead acid battery and so on. GEL Battery for UPS/EPS, Power wheels, Inverters, Off grid solar system, Solar street light, Telecommunication and other electrical D/C power sources. Deep cycle & High performance. Professional 12V120Ah Gel Battery

Product Description Tubular Plate Battery 2V 250AH (OPzS250-2) Specifications The OPzS battery is a traditional tubular plate flooded battery which offers 20 years design life with a cycle life of 1800 cycles at 80% Deep Of Discharge. This range is most suited for all standby power applications that require the highest levels of reliability and security. Characters 1. Use gel electrolyte, with nice performance on wide temperature range, suitable for harsh environments coperation. (-40�º C~60�º C) 2. Made by tubular positive plate materials, monthly self-discharge rateâ?¤ 1.5% 3. Excellent recover ability of Cycling and deep discharge, more than 800 times cycle life at 100% deep discharge, improve the system reliability effectively. 4. Floaing design life time up to 20 years, in the coperation of normal float charging, capacity keeps stable, attenuation rate stays low. Application Wind power system, Solar power system, Emergency lighting alarm systems, UPS(Uninterruptible power sypply) Telecommunications, Telephone exchanges control equipment, EPS instrumentation, Bank ATM System, Medical equipment, Fire and security system and so on. Capacity 77�°F(25�ºC) 100 hours rate(3.00A 1.85V) 300Ah 10 hours rate(25.0A 1.80V) 250Ah 5 hours rate(42.0A 1.80V) 210Ah 3 hours rate(62.5A 1.75V) 187Ah 1 hour rate(132.0A 1.67V) 132Ah Internal Resistance Full charged battery 77�°F(25�ºC):0.0008�© Capacity affected by Temperature (10 hour rate) 104�°F(40�ºC) 102% 77�°F(25�ºC) 100% 32�°F(0�ºC) 85% 5�°F(-15�ºC) 65% Self-Discharge 68�°F(20�ºC) Capacity after 3 month storage 90% Capacity after 6 month storage 80% Capacity after 12 month storage 60% Max discharge current77�°F(25�ºC):1250A(5S) Charge (Constant Voltage) Float:2.23 to 2.27V/77�°F/(25�ºC) Cycle:2.38 to 2.42V/77�°F/(25�ºC) Max Current:25A

Basic Info. Model NO. PST12-12 Installation Packaged Rechargeable Chargeable Size 151*98*94mm Weight 3.43kg Color Black / Dark Gray Cell 3 Sealing Glue Sealing Separator AGM Flat Plate Plate Battery Case ABS Terminal Lead Safety Explosion-Proof Transport Package Carton, Then Pallet Specification CE/ FCC Trademark Pustun Origin China HS Code 8507200000 Production Capacity 2000 PCS/Day Product Description Maintenance Free Sealed Lead Acid Storage Battery, Deep Cycle AGM Type VRLA Battery for UPS, Solar Power System, Wind Renewable Energy, PV Application, Emergency Lighting, CCTV, Street Light, Fire & Security Alarm, Medical Equipment and so on.

Basic Info. Model NO. PST100-12 Origin China HS Code 8507200000 Production Capacity 600pieces/Day 12V 100Ah GEL Solar battery (PST100-12) Valve regulated lead acid series ups batteries are designed with AGM (Absorbent Glass Mat) technology, high performance plates and electrolyte to gain extra power output for common power backup system applications widely used in the field of UPS, Emergency Lighting System.

Product Description gel accumulator 2v 800ah (OPzV800-2) OPZV800-2 Opzv Series Valve Regulated Lead Acid batteries are designed with a proven combination of GEL and Tubular technologies to offer a very high level of reliability. Opzv batteries benefit from an optimized plate design which gives capacities in excess of the DIN standard values. In addition, this series offers both a longest float life and a high cycle life in widely industrial field. Safety and Sealed No electrolyte leakage will occur from terminals or case or case of any Storace Battery ensuring safe and efficient operation. Maintenance-Free operation There is no need to add water thanks to unique gas recombination system which totally transforms the generated gas into water. Storace batteries do not need the equalizing charge As a result of monomer battery's interface resistance capacity and float voltage uniformity are fine. No Free Acid The special electrolyte retentive separators bold the acid and thus there is no free acid inside the battery, and therefore the battery can be mounted in any position. Long life Design The use of heavy -duty lead-calcium alloy grids with anti-corrosive construction enables the Storace AGM battery to remain in float service for 10-15 years; the GEL battery to remain in float service for 15-20 years. The cycle life can be more than 1000 cycles High Reliability and stable quality With advancing AGM and GEL production technology and strictly quality control system, the battery quality is stable and the battery performance is reliable. The voltage, capacity and seal are 100% tested on line. Self-discharge The self-discharge rate in room temperature is approximately 2% of nominal Capacity per month. Operating temperature TheStorace Battery can be operated between -40�°C to +65�°C.The battery can give out over40% fo nominal capacity at -40�°C.

Basic Info. Model NO. PST200-12 Installation Packaged Rechargeable Chargeable Size 522*239*2180mm Weight 60kg Color Black / Dark Gray Cell 3 Sealing Glue Sealing Separator AGM Flat Plate Plate Battery Case ABS Terminal Lead Safety Explosion-Proof Transport Package Carton, Then Pallet Specification CE/ FCC Trademark Pustun Origin China HS Code 8507200000 Production Capacity 2000 PCS/Day Product Description Maintenance Free Sealed Lead Acid Storage Battery, Deep Cycle AGM Type VRLA Battery for UPS, Solar Power System, Wind Renewable Energy, PV Application, Emergency Lighting, CCTV, Street Light, Fire & Security Alarm, Medical Equipment and so on.

Drained battery scrap (free of battery acid/fluid) including lead plates and plastic/rubber casing complete with caps. Purity : Complete Battery with full contents, except the liquid Car batteries are treated as hazardous waste. Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm.

The battery is a new type of energy storage product, which can be used to provide reliable power supply for various equipment and systems. It is especially suitable for applications with large power, limited installation space, limited bearing capacity and long life.Battery built-in bms battery management system, battery voltage, current, temperature and other information management and monitoring. In addition, the battery pack can balance the charge and discharge of the battery to prolong the cycle life. Multiple battery packs can be parallel to expand capacity and power, parallel to expand capacity and longer power support time requirements.

Lithium iron phosphate battery is a kind of lithium ion battery that uses lithium iron phosphate (LiFePO4) as the positive electrode material and carbon as the negative electrode material. It has the advantages of high working voltage, high energy density, long cycle life, good safety performance, low self-discharge rate and no memory effect. Pustun lithium iron phosphate battery is your best power choice for energy storage system of solar street light. This LFP series battery is specifically designed for solar street light application, which has more than 10 years service life; LFP series batteries are the best choice for the durable, safe, environment-friendly energy solution and they can be customized according to your requirement, such as dimension, voltage, capacity of battery. With an increased lifespan, this battery can save you much cost against frequent battery replacement. The working life of lithium battery especially under the outdoor high temperature environment is five times longer than the traditional lead acid battery.

Product Description And Specification; 1. Dry charged battery & MF battery. 2. Meet all DIN & JIS standard. 3. Powerful quick scrap used car batter. Product Feature; (1)Maintenance-free operation. There is no need to check specific gravity of the electrolyte or add Water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leak proof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm. Drained Lead Car Battery Scraps (Rains) Drained Lead-Acid Battery Scrap (RAINS per ISRI Specifications). Our Acid Battery Scrap on 99.99%. Fe Content (%): 100%) Battery features; - Sealed and maintenance free operation battery - Non- Spill able construction design. - ABS Containers and Covers (UL94HB), UL94V-0 optional. - Safety valve installation for explosion proof. - High quality and high reliability. - Exceptional deep discharge recovery performance. - Low self-discharge characteristic. - Flexibility design for multiple install positions. - No memory effect. - CE certificate. - Wide operating temperature range. Battery Application; -Solar system - Alarm System - Cable Television - Communication Equipment - Control Equipment - Security System - Medical Equipment â?? UPS - Power Tools - Toys - Emergency Power System - LED Lig

General Description of Potassium-hydroxide: CAS :1310--58--3 Strong alkaline white solid or colorless liquid products, Ion-Exchange Membrane process. Main Applications of Potassium-hydroxide : It is widely used in the production of potassium carbonate including KHCO3, potassium soaps,detergents, fine cosmetic, potassium hydrogen phosphate, potassium-permanganate, medical intermediate, liquid fertilizers, synthetic rubber, ABS resin, natural rubber emulsion, paper agent, fermentation,de-sulfuration in petroleum refining, bio-fuel and alkaline battery.

Grade: Injection Grade/Extrusion Grade / Application: Electronic Appliance Body Part, Luggage Case, Toys Spare Part / Type: Raw Granules Resins / Material: ABS Plastic Raw / Material Granules / Appearance: White / Black Pellets / Package: 25 KG PP Bag / Melt Flow Index: 28 / Impact: 15-16 (Black pellets) / 18-22 (White pellets)