1. Rinse Once Before Brewing for Ultimate Flavor 2. Place some Tea in Teapot 3. Fill up the Teapot with boiling water of 212 F (100 C ) 4. Let tea steep approx. 9 min
1. Rinse Once Before Brewing for Ultimate Flavor 2. Place some Tea in Teapot 3. Fill up the Teapot with boiling water of 212 F (100 C ) 4. Let tea steep approx. 9 min
IUPAC Name: (3R,4R,5R)-1,3,4,5,6-Pentahydroxyhexan-2-one Other Names: D-allulose, D-ribo-2-hexulose Appearance: White Crystal Powder CAS Number: 23140-52-5/551-66-8 Chemical Formula: C6H12O6 Molar Mass 180.16 g�·molâ??1 Melting Point 58 �°C (136 �°F; 331 K) Function of Allucose 1. Low-calorie sugar 2. No effect on blood sugar 3. Can be part of a healthy diet 4. The taste and Texture of sugar, without all the calories 5. Contributes far fewer calories (approximately 90 percent less) than sugar
IUPAC Name: (3R,4R,5R)-1,3,4,5,6-Pentahydroxyhexan-2-one Other Names: D-allulose, D-ribo-2-hexulose Appearance: White Crystal Powder CAS Number: 23140-52-5/551-66-8 Chemical Formula: C6H12O6 Molar Mass 180.16 g�·molâ??1 Melting Point 58 �°C (136 �°F; 331 K) Function of Allucose 1. Low-calorie sugar 2. No effect on blood sugar 3. Can be part of a healthy diet 4. The taste and Texture of sugar, without all the calories 5. Contributes far fewer calories (approximately 90 percent less) than sugar
grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%. Cu%: 99.9% Element...0.005... (%) Copper..99.9... % (Min.) Lead...0.005.... % (Max.) Bismuth...0.5..% (Max.) Total impurities...0.3..% (Max.) Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle
grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%. Cu%: 99.9% Element...0.005... (%) Copper..99.9... % (Min.) Lead...0.005.... % (Max.) Bismuth...0.5..% (Max.) Total impurities...0.3..% (Max.) Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive sexual yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle
SFEX CT Manteau, also called the Cable Tray Manteau, is very efficient in extinguishing the initial fire suppression with immediate responses in case of fire because when a micro capsule for fire extinguishing reacts to a certain temperature and flame, it automatically disperses extinguishing agents. It\'s based on a cooling fire extinguishing method, shows an excellent characteristic of being able to extinguish a fire completely with an immediate response at the time of initial fire if you cover it over the electric power line. SFEX Solution : SFEX CT Manteau / SFEX AP Tape 1. Horizontal Section Fire : Access Floor, Cable Pit, and Cable Tray Installation and How It Works 1. Cover the SFEX CT Manteau. 2. Prevent the spread of fire with extinguishing/flame retardance properties 2. Vertical Section Fire Installation and How It Works 1. Wind the SFEX AP Tape on the cable. 2. Prevent the spread of fire with extinguishing/flame spread prevention properties Test Result : AP Tape Test Item Test Standard Unit Test Result Flame test of vertically placed cables The carbonization length should not exceed 2.5mm from the bottom edge of the burner - Do not exceed (carbonization length: 0.6m) During installation, photograph after installation *Test Information Test Facility Standard : KS C IEC 60332-3-10 : 2003(Compliant) Volume of nonmetallic material(L) per meter of test specimen : 1.5 (volume of nonmetallic material for finished cable, not including AP Tape) Number of test pieces : 5 Number of tiers : 1 Number of burners : 1 Position of test piece : Spatial type Flame application time (minutes) : 20 AP Tape installation method : AP Tape in 0.6/1 kV TFR-CV 4C 35 from the height of burner to the top 10cm gap between AP Tape and 20cm length of AP Tape
Dolomite mineral is a double carbonate of calcium and magnesium and it exhibits a granular structure. It has high natural whiteness and it's noted for their ease of dispersion. Its use improves properties such as weather ability, reduces shrinkage, fissure development and water absorption. Natural Dolomite Powder is of White Colour and is used as Filler in many applications such as Soap & Detergent, Paints, Ceramics and many other Industries. Applications: - Soap & Detergent Leather Cloth Industry Cable Industries Rigid PVC Pipes Iron, Steel, and Ferro-Alloys Industries Paints, Inks, Powder Coating Ceramic Industry Rubber Industry Glass Industry Available Mesh Size: - 100 TO 700 MESH Custom sizes and Material of required specifications can be made in case of Bulk and Regular orders. BRIGHTNESS: - 92 TO 96 AS PER REQUIREMENT Index Compound Result 1. Silica - (SiO2) 10.41 % 2. Alumina - (AI2O3) 01.15 % 3. Iron - (Fe2O3) 00.21 % 4. Titanium - (TiO2) 00.18 % 5. Calcium - (Cao) 30.02 % 6. Magnesium - (MgO) 18.41 % 7. Soda - (Na2O) 00.34 % 8. Potash - (K2O) 00.07 % 9. Loss on Ignition - (LOI) 38.91 %
Giva Agro's Sleep Time Tea: A Serene Blend for Your Nightly Ritual Drift into a peaceful slumber with Giva Agro's Sleep Time Tea. Our meticulously crafted blend combines the soothing properties of Lavender, Lemongrass, Spearmint, Hibiscus, Rose Petals, and Ginger. Each sip promises a journey towards relaxation and tranquility, preparing you for a restful night ahead. Key Ingredients: 1. Lavender: Known for its calming and relaxing effects, lavender helps ease the mind into a state of serenity. 2. Lemongrass: With its mild sedative properties, lemongrass aids in reducing insomnia and improving sleep quality. 3. Spearmint: Refreshing and soothing, spearmint gently relaxes the nervous system, promoting a sense of calm. 4. Hibiscus: Its tart flavor is not only delightful but also helps lower blood pressure, contributing to a restful sleep environment. 5. Rose Petals: The essence of rose petals adds a floral note that comforts the heart and spirit. 6. Ginger: Known for its numerous health benefits, ginger adds a warming sensation that can help soothe and relax the body. Brewing Your Perfect Cup: Boil fresh water to 100�°C (212�°F). Add one teaspoon of Giva Agro's Sleep Time Tea blend per cup into your teapot or infuser. Pour the boiled water over the tea and allow it to steep for 5-7 minutes. Strain and serve hot. For a sweeter experience, add a touch of honey. Experience the Difference: Giva Agro's commitment to quality ensures that each ingredient in our Sleep Time Tea blend is sourced with care, providing you with a pure and potent herbal experience. Embrace the tranquility of the night and prepare your body and mind for a deep, restorative sleep with our herbal tea blend. Savour the moment of calm before bedtime and let Giva Agro's Sleep Time Tea be your companion to a world of dreams
Melting point 151-154 C(lit.) Boiling point 265 C100 mm Hg(lit.) Density 1,36 g/cm3 vapor density 5 (vs air) vapor pressure 1 mm Hg ( 159.5 C) refractive index 1.4880 FEMA 2011 | ADIPIC ACID Flash point 385 F storage temp. Store below +30C. solubility methanol: 0.1 g/mL, clear, colorless pka 4.43(at 25) form Solid color White Odor wh. monoclinic prisms, pract. odorless PH 3.74(1 mM solution);3.22(10 mM solution);2.71(100 mM solution); Water Solubility 1.44 g/100 mL (15 C) Merck 14,162 JECFA Number 623 BRN 1209788 Exposure limits ACGIH: TWA 5 mg/m3 Stability Stable. Substances to be avoided include ammonia, strong oxidizing agents. InChIKey WNLRTRBMVRJNCN-UHFFFAOYSA-N LogP 0.09 at 25â?? FDA 21 CFR 184.1009; 582.1009; 175.300; 175.320; 177.1680 Substances Added to Food (formerly EAFUS) ADIPIC ACID SCOGS (Select Committee on GRAS Substances) Adipic acid CAS DataBase Reference 124-04-9(CAS DataBase Reference) EWG's Food Scores 1 FDA UNII 76A0JE0FKJ NIST Chemistry Reference Hexanedioic acid(124-04-9) EPA Substance Registry System Adipic acid (124-04-9)
1, Safe working load: 200kg 2, The back board folding angle: 70 3, The thigh board folding angle: 30 4.TR/ATR:0-20 5, The four motors automatically realize various positions. The motors are selected from internationally renowned brand Timotion, which are safe and noiseless. 6, Two control methods, operation handle control and guardrail built-in button operation, control handle is clear and easy to operate; built-in buttons on the side rail near headboard, graphic display, clear at a glance. The key has lock function, which reduces the probability of misoperation and locks safely. 7, Side rail: 1),Two side rail in each side of bed. 2),It can be automatically locked when raising, and each guardrail can bear more than 50KG. 3), Guardrail safety switch design, placed under the guardrail to avoid misuse of the patient; 4), Equipped with gas spring for easy operation. 5), The steel structure of the guardrail base is welded on the bed to ensure safety. 6), The 4-pieces guardrail has angle indicator that allows the caregiver to quickly and easily adjust the backrest angle and TR/ATR angle of the bed. 7),It equipped with guardrail built-in button to make it easier for the patient to operate the bed. 8, Casters 1), The four casters use 125mm center control one. 2), Steel structure, precision ball bearings are placed in the rotating head and the caster, the caster frame is equipped with a wheel cover made of synthetic material, suitable for locking the lever with a cam hole. Caster surface material: polyurethan, passed EN 12531 standard, single dynamic (force) load is not more than 175 kg, static load is not more than 200 kg 3),Braking system: Pedal-type synchronous braking arms on both sides of the bed, adopting all-metal structure, compact structure and reliable braking. 9, Shank board can be adjusted manually by simple steel support for convenience position. 10, At the 4 corners of the bed, there is an diameter HDPE anti-collision wheel which intergated on H/F board. 11, There are 1 hook in each side for drainage bag. 12, It equipped with manual CPR for emergency treatment.
We are one of the leading companies specializes in exporting fresh fruits to many countries in the world . we always try our best the offer the best quality with the most competive prices to our customer . Long term cooperation is our company' purpose Color: Red Skin, White/Red Flesh Big size (Net weight) :14-18 pcs/9kgs, 16-20pcs/9.5kgs, 16-20pcs/10kgs, 36-42pcs/22kgs Small size (Net weight): 20-24pcs/9kgs, 22-26pcs/9.5kgs, 22-26pcs/10kgs, 56-60pcs/22kgs Packing :9.5 â?? 25kgs/Carton Box, 2040 carton boxes n.w 10kgs / 40â??RF container Origin; Viet Nam Payments: T/T, L/C Shipments ;FOB, C&F Port: Ho Chi Minh, Vietnam Min Order: 1 Tons Delivery: From 10 to 15 days after signing the contract
Product description. 1.Chemical name: Methyl silicone oil 201 2.Alias: PDMS/ polydimethylsiloxane 3.Viscosity: 350�± 10% 4: Volatile fraction (%) < 0.5 5:Appearance and Properties: colorless transparent dense liquid Products Description Melting point â??59 �°C(lit.) Boiling point 101 �°C(lit.) density 0.963 g/mL at 25 C vapor density >1 (vs air) vapor pressure 270 C (518 F) storage temp. 2-8C form Oily Liquid color Clear colorless Specific Gravity 0.853 Odor Odorless Water Solubility PRACTICALLY INSOLUBLE
Asafoetida Oleoresin has a characteristic aromatic order and bitter acidic taste. It is actually a gum oleoresin from the various plants of ferula varieties. Asafoetida oleoresin is used in diluted form. The pure resin is very strong and with disagreeable odour. Asafoetida (/�¦s�?�?f�?t�ªd�?/; also spelled asafetida) is the dried latex (gum oleoresin) exuded from the rhizome or tap root of several species of Ferula, perennial herbs growing 1 to 1.5 m (3 to 5 ft) tall. They are part of the celery family, Umbelliferae. Asafoetida is an oleo-gum-resin obtained from the exudates of the roots of the Iranian endemic medicinal plant, F. asafoetida. It is used widely all over the world as a flavoring spice in a variety of foods.
Potassium Metaphosphate, E341, CAS no.7758-87-4, also known as MKP, appears as a white powder or granular, odorless, slowly soluble in water, potassium salt of phosphoric acid. As an experienced Potassium Metaphosphate manufacturer and supplier, we has been supplying and exporting Potassium Metaphosphate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Potassium Metaphosphate Specification ITEM STANDARD APPEARANCE WHITE POWDER CONTENT(As P2O5),% 59 61.0 As, % 0.0003max. HEAVY METALS % 0.0015max. Pb,% 0.0002 max Hg,% 0.0001 max Cd,% 0.0001 max VISCOSITY 6.5 15 F, % 0.001max LOSS ON DRYING % 5.0max
Monoammonium Phosphate, E342, CAS no.7722-76-1, also known as Ammonium dihydrogen phosphate, a salt of phosphoric acid manufactured through chemical synthesis, ammonia and phosphoric acid as raw materials. Properties: white crystalline powder, soluble in water. Monoammonium Phosphate (Food Grade) is used in food as a pH control agent, buffering agent, acidulate, and nutrient source. Also in bread and dough, dry powder beverages, eggs, isotonic beverages, mineral supplements, starter cultures and yeast cultures. As an experienced Monoammonium Phosphate manufacturer and supplier, we has been supplying and exporting Monoammonium Phosphate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Monoammonium Phosphate Specification No. standard name industrial grade food grade 1 Main content(as NH4H2PO4)% 99.0 99.0 2 Phosphorus pent-oxide(as P2O5)% 61.0 61.0 3 Nitrogen(as N)% 11.8 11.8 4 PH value 4.4-4.8 4.4-4.8 5 Moisture% 0.2 0.2 6 Heavy metal(as Pb)% 0.001 7 Arsenic(As)% 0.0003 8 Fluoride(as F)% 0.005 9 Water insoluble % 0.10 0.10
Diammonium Phosphate, E342, CAS no.7783-28-0, also known as DAP, is an ammonium salt of Phosphoric Acid, available as White Crystal. Manufacturing process via chemical synthesis, Ammonia and Phosphoric acid as raw materials. Diammonium Phosphate is often used as a yeast nutrient in wine making and brewing mead, mainly used as a fermentation agent. As an experienced Diammonium Phosphate manufacturer and supplier, we has been supplying and exporting Diammonium Phosphate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Diammonium Phosphate Specification No. standard name industrial grade food grade 1 Main content(as (NH4)2HPO4)% 99.0 99.0 2 Phosphorus pent-oxide(as P2O5)% 53.0 53.0 3 Nitrogen(as N)% 20.8 20.8 4 PH value 7.8-8.2 7.8-8.2 5 Moisture% 0.2 0.2 6 Heavy metal(as Pb)% 0.001 7 Arsenic(As)% 0.0003 8 Fluoride(as F)% 0.005 9 Water insoluble % 0.10 0.10
TetraSodium Pyrophosphate, E450, CAS no.7722-88-5, white powder or granular, also called sodium pyrophosphate, tetrasodium phosphate or TSPP, manufacturing process from Disodium Phosphate. Tetrasodium pyrophosphate is used as a buffering agent, an emulsifier, a dispersing agent, and a thickening agent, and is often used as a food additive. TSPP is used to modify the proteins enabling them to retain moisture during storage, thawing, and cooking. As an experienced TetraSodium Pyrophosphate manufacturer and supplier, we has been supplying and exporting TetraSodium Pyrophosphate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. TetraSodium Pyrophosphate Specification ITEM STANDARD NaH2PO7 >95% PH at 1% 9.9-10.7 Loss of Ignition
Phosphoric Acid, E338, CAS no.7664-38-2, a mineral acid, colorless, transparent syrupy liquid. Phosphoric Acid is an acidity regulator and nutrition agent for yeast food, and it applied to flavors, canned food and light drinks as well as used in wine making. As an experienced Phosphoric Acid manufacturer and supplier, we has been supplying and exporting Phosphoric Acid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Phosphoric Acid Specification NO. Specifications Phosphoric Acid Industrial Grade Phosphoric Acid Food Grade 1 Appearance Colorless, transparent syrupy liquid or in very light color 2 Colour 30 20 3 Assay (as H3PO4 )% 85.0 85.0 4 Chloride(as Cl- )% 0.0005 0.0005 5 Sulphats(asSO42- )% 0.005 0.003 6 Iron (Fe)% 0.002 0.001 7 Arsenic (As)% 0.005 0.0001 8 Heavy metals,as Pb% 0.001 0.001 9 Oxidable matter (asH3PO4)% 0.012 10 Fluoride,as F% 0.001
Potassium Tripolyphosphate, E451, CAS no.13845-36-8, appears as a white powder, used as a sequestrant, buffering agent, an emulsifier, and a texturizer in processed meat, fish and cheese. It is also highly soluble in aqueous solutions and has excellent dispersion properties. Applications for Potassium Tripolyphosphate include in low sodium meats, processed seafood and cheeses, soups and sauces, noodle products and modified starches. As an experienced Potassium Tripolyphosphate manufacturer and supplier, we has been supplying and exporting Potassium Tripolyphosphate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Potassium Tripolyphosphate Specification ITEM STANDARD Appearance White powder Assay (%) 95.0 Water insolubel matter (%) 0.2 pH (1% Solution, 25) 9.2- 11.1 P2O5 (%) 47 Fluorid (F) 10 ppm Iron (Fe) 10ppm Arsenic (As) 3ppm Lead (Pb) 10ppm Mercury 1ppm Heavy Metal (as Pb) 15ppm
