Uyue 946-1010 400W Constant Temperature Heating Preheating Platform for Mobile Phone LCD Screen Repair Screen Removal Heating Table, GBA Ball Planting Heating Plate 110V/220V. Features: 1. It adopts Aviation aluminum material, anti-scald design, and all edge has been protected to prevent scald. 2. There stage temperature control,high-temperature resistance, fast heat dissipation, and digital display panel. 3. It can be used for repair cell phone screen, LED display, component heating work, SMD re-engineering work, PCB removing,soldering work. 4. The machine is a high-temperature electric products, remember to cut off the power if not using the machine to avoid danger and accidents. Widely used to: Phone Touch Screen & Middle frame Removing LCD Beads Welding Electronic Circuit Board Repairing Liquid heating & Germiculture Preheating in special material ETC Specification: Model: 946-1010 Working voltage: AC 110V/220V Equipment power: 400W Temperature control range: 50�°C~350�°C Constant temperature stability: �±2�°C Platform size: 100*100mm Dimensions: 120*120*120mm Notes: In the course of their work, the board and around the very hot, be careful to guard against burn, burn! In order to extend the life of the heating element and the machine is prohibited in high temperature (300 �°c above) continuous long-term use of the machine, under normal circumstances, the machine should not be more than eight hours of continuous work time. Package includes: 1 x Host 1 x Power cord
PTFE Dispersion JF-4DCD 1.Product Introduction PTFE  dispersion  JF-4DCD  is  a  concentrated  dispersion  of  tetrafluoroethylene  polymerization  with  solid  content  of  about  60%  (WT).  It  will  provide  many  excellent  properties  to  the  products  such  as  anti-corrosion,  weather  and  friction resistance. Recommended  for  (but  not  limited  to)  impregnation  of  glass  fiber,  asbestos  and  high-grade  non-stick  coatings. 2.Technical Parameter Item Nominal Value JF-4DCD Appearance White or yellowish liquid Solid content, % 60 ±2 Surfactant, % 4.0~7.0 PH 8~10 Viscosity, 10-3Pa ·s 20~40 3.Mark, Package, Storage & Transportation 3.1 Mark There shall be firm and clear marks on the drums of this product, indicating company name, product name, batch number, brand number (specification number), net content, etc. 3.2 Package The product shall be packed in a plastic drum with net weight of 1,250 kg per drum. 3.3 Storage 1.Store in a coolã??dryã??ventilated warehouse, keep the container airtight. 2.After three months, shaking the drum every week to avoid the deposition. 3.4 Transportation Not classified as hazardous for transport. During transportation and storage, avoid heavy shaking, high temperature and below 0 .
A.Product Overview: 1.The hose loop is used in oil field cementing, acid fracturing, etc; 2.The hose loop is assembled by swivel joint, hammer union and pup joint, can be swiveled in three directions flexibly; 3.The hose loop can be used in discharge pup joint, transportation pup joint, well testing pup join, well cementing pup joint, and transportation liquid flow under high pressure environment; 4.The hose loop can be matched with many kinds of swivel joints; 5.The hose loop has specifications of 2in, 3in, 4in and is adaptive to working under 42MPa(6000psi), 70MPa (10000psi), 105MPa(15000psi); 6.Hummer union can be connected or disconnected with pup joint. The disconnection is suitable for low pressure pup joint and connection is suitable for high pressure pup joint; 7.We are able to supply hose loop in each specification, pressure, length (according to expanded size) according to users needs. B.Design Features: 1.The swivel joint attached to hose loop is characterized by flexibility, impact resistance, vibration resistance, big rate of flow, etc. 2.The hose loop has fine sealing performance; 3.The hose loop is connected by union, which is simple to assemble and disassemble, crush resistance, and high sealing performance. It has the advantages of easy foldability, convenient transportation and storage; 4.We are supplying H2S proof hose loop under acid environment; 5.The thread joint conforms to international specifications and can be exchanged to like products internationally. Get more.
Other Name: DHA INCI Name: ERYTHRULOSE Molecular Formula: C4H8O4 Molecular Weight: 120.1 Appearance: Clear yellow viscous liquid Purity: 80% CAS NO.: 533-50-6 Application: cosmetics and skin care products Erythrulose is a natural ketose. Generally used in conjunction with dihydroxyacetone DHA. Make DHA darker in color and more evenly distributed. Dosage: 1%-3% for water phase below 40�?�¢??. Erythrulose is a natural tanning ingredient that provides a more real, more uniform, and longer-lasting tanning effect. Due to its smooth tanning kinetics, it is a particularly useful progressive tanning product. It can be well combined with ActiBiso-DHA (hydroxyacetone) for two product types, classic self-tanning agent and progressive tanning agent. Erythrulose is a natural ketose that reacts with the amino groups of protein peptides on the skin surface through Maillard reaction to produce a brown polymer product that directly binds to the skin surface (stratum corneum), which is compatible with 1,3-dihydroxyacetone. In contrast, erythrulose provides a more natural and true tan, lasts longer and the formula is more stable. As a partner of DHA. Erythulose improves key self-tanning product characteristics such as less streaks, more natural color, and it avoids skin dryness and irritation. Erythrulose causes a permanent tanning effect-it can only be removed through the skin's natural desquamation process. Erythulose is mainly used as a raw material for cosmetic formulations, especially as a sunscreen, it has a special effect, can prevent excessive evaporation of skin moisture, and play a role in moisturizing, sun protection and UV radiation protection. Apply on the skin to darken the complexion.
As Dukoll Company, we are distributing "Amala Magic Sponge Cloth" product in Europe, Middle East and Asia. Amala is an American company located in California and "Magic Sponge Cloth" product is made in Germany. We can offer you a very good bulk price which will leave you a good profit. Please do not hesitate to contact me if you're interested. I can share the product and the packaging pictures. Amalaâ??s Magic Sponge Cloth is extremely effective. It can be used on all surfaces to remove dirt and dust, and will leave no scratches or streaks. One cloth absorbs 20 times its own weight in water, and quickly releases liquids by simply wringing it out. This cloth reaches almost anywhere you clean due to its soft, flexible and strong material. Our sponge cloth is extremely durable, and is tear- and abrasion-resistant. It is reusable and can be washed up to 300 times with a soft detergent. Amalaâ??s Magic Sponge Cloth is made using a patented process from a three-dimensional blending of cellulose, which is the most abundant organic polymer on earth, NON-GMO unbleached cotton and natural mineral salt. During production, the salt is washed out, leaving the remaining blend (70% cellulose & 30% cotton) extremely porous, which makes the sponge cloth extra absorbent. Our sponge cloth is made out of 100% renewable resources. A single cloth replaces up to 15 rolls of paper towels, is reusable and is washable many times. All of this combined helps reduce waste materials going to landfill. Our Benefits: 100% Natural (70% Cellulose, 30% Cotton) 100% Vegan NON-GMO Highly Absorbant A 3-pack replaces up to 45 rolls of paper towel Machine washable up to 300 times Absorbs up to 20 times its own weight Extremely durable, soft, flexible & light No scratches & streaks Convenient size for cleaning all surfaces Made in Germany
Bird's Nest Powder Products (5%) Granular matter made from bird's nest with bird's nest. Compared with traditional bird's nest, bird's nest powder is easier and more convenient to use, while retaining the nutritional value of bird's nest. The nests are harvested, boiled, cleaned, and dried before consumption. For skincare products, it is often confined to a powder and added to product formulas as an ingredient. The bird's saliva is rich in proteins, polysaccharides, trace elements, and other nutrients, all of which are good for the skin. Advantages of bird's nest powder 1. Easy to use: Traditional bird's nest (including bird's nest, bird's nest and other products sold in the market) is cumbersome to use. It needs to go through complex processes such as foaming, plucking, and cooking. It usually takes 5-8 hours to cook. The pace of life of modern people is very fast, and they often do not have the patience to cook bird's nest. The bird's nest powder is ground into nano-sized particles through nano-scale grinding technology, which can be directly drunk with warm water, or added to various stews and fruit juices, saving a lot of cooking time and cost. 2. Easy to absorb: The main components of bird's nest are protein, carbohydrates, amino acids and various trace elements, which is the value of bird's nest. Although the nutritional value of bird's nest is high, it also depends on whether the body can absorb these nutritional values efficiently. Traditional bird's nest, due to its large particles, the human body can only absorb about 30% of it every day. For example, if a person eats 10g of bird's nest a day, only 3g will be absorbed by the body, and 7g cannot be absorbed by the body. The bird's nest powder is ground into nano-scale particles through the patented wall-breaking technology, which can be absorbed by the human body 100%, which is the so-called passive absorption. Therefore, bird's nest powder is easier for the body to absorb than traditional bird's nest. Suggested Uses Sweets, Jelly-sweets, Hard Capsule, Soft Capsule, Beverages (solid, liquid), Dairy products, Bean products, Spices, Fruit products, Baked goods.
QUICK 857DW+ lead free adjustable heat gun/hot air gun with helical wind soldering rework station, QUICK 857DW+ is an upgrade version of QUICK 857D SMD ESD soldering station, high efficiency heat dissipation to the heater soldering tip. Professional mobile cell phone repair tools: cheaper soldering iron and soldering station for proper mobile phone repairing. QUICK 857DW+ Lead Free Rework Station SMD ESD Soldering Station (upgrade verson of 857DW) Technical parameters : Power Consumption: 580W Air pump: DC motor, double turbine rotate out of the wind Temperature control: 100 to 450 degrees Gas flow rate: 100 litres/minute Component length: 110cm Size: 17 x 10.5 x 24 cm Product Features : Linear air volume adjustment, mains have change the air volume can be stable, double vortex spinning wind, the wind is soft, no impact. Express of temperature, 3 seconds to reach the set temperature, temperature of liquid crystal display (LCD), intelligent sensor, automatic cooling, delay shutdown. Welding with plastic components, ringer, such as the tail inserted inline deformation, welding circuit board no bubbles. Shield does not change color. BGA chip is not easy to break. Product Usage : Suitable for a variety of components desoldering. Such as: SOIC, CHIP, QFP, PLCC, BGA, etc. Used in thermal shrinkage, drying, in addition to the paint, in addition to stick, thawing, preheating, disinfection, plastic welding, etc. Package List : 1pcs x Heat gun Quick 857DW 2pcs x Tweezers
Description DEEP POUR 2 PART RESIN CRYSIN5.0 is a crystal clear two-part epoxy resin system which can be poured at 5cm once. Low oder and zero VOCs makes CRYSIN5.0 an ideal resin for large projects, makin jewelries, or epoxy incorpotated furniture. Mixing Ratio for Crysin 5.0 is 3 (Resin) : 1 (Hardner) At room temperature 25 C (77 F) : 24~48 Hours Curing time may vary depending on the room temperature and humidity. 6 16 Hours after first coating (Dry to touch) 5cm Key Features 1. Crystal clarity 2. Self-defoaming 3. Shore D Hardness of 80 or above 4. Deep casting between 25-50mm per pour 5. Naver top-selling products Cautions 1. Do not drink 2. Do not add the liquid into a spray bottle 3. Keep out of reach of children and infants 4. Do not throw the container 5. Do not leave the product on skin for long duration. Rinse skin with warm running water and soap 6. Wearing protective gloves, protective clothing, eye protection is recommended 7. Store the product in a well-ventilated area away from heat/sparks/open flames/hot surfaces 8. In case of fire, use alcohol-resistant foam, dry powder, or sand The price on this site is based on the smallest size of Crysin 5.0 which is 400g and MOQ of 1000 sets. For quotes on larger sizes please enquire.
Acid purification instrument: also known as acid purification system, high purity acid purifier, acid reagent purifier, high purity acid distillation purifier, etc., often due to the poor purity of acid in laboratory work, resulting in the deviation and error of analysis results. Commercially available ultra-pure acids are often very expensive and it is difficult to meet the large demand for acid in daily analysis. Therefore, purification and optimization of acid quality is the most economically feasible way. Our factory's acid purifier can be used in laboratories such as the purification of HNO3, HCl, HF, alkali solution and organic solvent. The purified acid is as good as that of Merck. acid purifier is to use the principle of thermal radiation, keep the liquid temperature below the boiling point temperature evaporation, and then condense the acid vapor to prepare high purity water and high purity reagents, widely used in sample processing and analysis experiments. Product Features: 1. It can meet the very low detection limit requirements of ICP and ICP-MS and provide laborator-grade ultra-pure acid for harsh analytical applications. The containers used are all made of Teflon corrosion-resistant non-adsorption plastics, which can deal with common laboratory acids such as HNO3, HCl and HF. 2. The experiment proves that the metal impurity content of about 10ppb acid can be reduced to about 0.01ppb after one distillation. If more acid is required, the number of purification can be increased.
Introduction to the product CW-TAB Corrosion and Scale Inhibitor Tablets are solid tablets manufactured by isolating, wrapping, release-controlling water treatment chemicals. and pressing it into solid tablets with the high-pressure production process and CRT controlled release technology. Its formulation set contains ferrous metal corrosion inhibitor, non-ferrous metal corrosion inhibitor, scale inhibitor, dispersant, deposition inhibitors, etc. Different from liquid water treatment chemicals the content of active matter is only 20%-30%, CW-TAB contains over 95% of active matters. When added into the system, each 100g can release active ingredients continuously for 3 to 4 weeks, to effectively control the corrosion and scaling of the cooling water system. Method of use The recommended dosing concentration of CW-TAB is 20-25ppm. You may simply hang the tablets in the water distribution pan or water collection pan of the cooling tower and other places where the water will go through. The tablets will dissolve and release active ingredients slowly for up to three to four weeks, and then be replaced after complete dissolution. Every 2 tablets of CW-TAB 200g can help with the daily maintenance of a cooling water system 0~25RT for three to four weeks, and the monthly dosage for a cooling water system of 100 RT is only 2kg. For larger systems 300RT or more, a special Leap tablet dosing device can be used to achieve the automatic dosing of tablets.
lkyl Sulfonic Acid Phenyl Ester (T-50) Alkyl sulfonic acid phenyl ester (T-50 ) is a general-purpose environmental plasticizer, with excellent gel properties and saponification resistance. It is suitable for many forms of polymers such as PVC and PU. Chemical components: Alkyl Sulfonic Acid Phenyl Ester (ASE) CAS NO.: 91082-17-6 Exterior: Transparent , pale yellow clear liquid Chemical formula: Rso2C6H5(R=C12H25---C18H37) Health and safety information : Refer to the Safety Data Sheet The relevant laws of instruction : Alkyl Sulfonic Acid Phenyl Ester is not classified as dangerous according to regulations of the People 's Republic of China on Hazardous Chemicals and European Related States Storage: Alkyl Sulfonic Acid Phenyl Ester (T-50) is stored in sealed original barrels and dry place because it is sensitive to moisture. And it can be stored for 2 years even longer under the right stored measure. Do not contact with iron for long periods of time to avoid discoloration The raw materials recommendations of transport and storage containers : aluminum or stainless steel (V4A or V2A) barrels with oil resistant coating. In order to ensure that the Alkyl Sulfonic Acid Phenyl Ester can be easily extracted from the outdoor tanker at low temperatures, the tanker is isolated firstly or slightly heat Alkyl Sulfonic Acid Phenyl Ester with warm water which is the ideal heating medium . But avoid steam heating and the heating coil must be aluminum or stainless steel (V4A). Solubility: Dissolved in the general organic solvent but not in water. Package: Tanker or metal bucket Explanation and Application: The storage tank, pipeline diameter and pump design are important parameters for density, viscosity and vapor pressure measurement when stored.
Parameter: Color:Â Black and Light grey Material:Â Gr1,Gr2 titanium Mesh Count:Â 2-400 Weave:Â Plain/twill/dutch weave Hole Shape:Â square, rectangular Shape:Â In roll,pc or sheet Roll Width:Â 0.914m,1.0m,1.22m or customized Roll Length:Â 10m,20m,30m or customized Samples:Â Available Chemical Composition C:Â 0.10%. Fe:Â 0.30%. H:Â 0.015%. N:Â 0.05%. O:Â 0.35%. Ti:Â Rem. Other each:Â 0.1; Total 0.04 max. Titanium wire mesh is woven from pure titanium wire or titanium alloy. Also called titanium mesh,titanium filter mesh,titanium electrode mesh and titanium current collecting mesh according to the applications. Titanium wire mesh is valued for its high strength,light weight and corrosion-resistant properties.It can be divided into black and bright according to the surface of the raw material. Black titanium mesh is made of pure titanium wire with graphite coating on the surface.Moreover,it is suitable for ship filtration and seawater filtration. For the bring titanium wire mesh,the raw material is graphite emulsion coating removed. It can be used as electrode mesh, titanium battery collecting mesh and fine chemical liquid filtering titanium mesh. Properties of Titanium Wire Mesh 1. Small density as well as high tensile strength 2. Superb corrosion resistance 3. Elevated temperature resistance 4. High thermal properties 5. High temperature resistance 6. Resistance to acids and alkalis 7. Non-toxic Application of Titanium Wire Mesh The titanium woven wire mesh can be used in various field in the below 1. Shipbuilding Military industry Satellite and aeropress 2. Chemical industry Environment industry Mechanical industry 3. Electroplating industry Petroleum Battery industry 4. Pharmaceutics Surgery Medicine Technique Woven, expanded, perforated. Packing:Â Inside with paper tube,outside with waterproof paper and plastic film, then loaded in wooden pallet or wooden box. Customized packing is also available.
Silicone fluid Dimethyl silicone Polydimethylsiloxane(PDMS) The chemical state of polydimethylsiloxane, colorless or light yellow liquid, odorless, high transparency. CAS No.: 63148-62-9 With excellent physical properties, it can be directly used for moisture-proof insulation, damping, shock absorption, defoaming, lubrication, polishing, etc. And as defoamer, mold release agent, paint and daily chemical additives. Application: Widely used in skin creams, hand creams, skin cleansers, sunscreens, shaving creams, deodorants, body washes, conditioners and other cosmetics. It can also be used to manufacture polishes and also be used as defoaming agents. It is also widely used as a release agent for various materials such as plastics and rubber, with excellent high and low temperature resistance, light transmission, electrical properties, hydrophobicity, moisture resistance and chemical stability. Q&A: 1. What is PDMS PDMS, also known as polydimethylsiloxane, is a silicon-based polymer that is a man-made synthetic molecule made up of repeating units called monomers. Silicon is the second most abundant element in the Earth's crust after oxygen, and silicon dioxide is also known as sand, commonly found on beaches and shores. PDMS can also be found in many cooking oils, processed foods and in fast food items such as chicken nuggets and French fries. 2. Are you a trading company or a a manufacturer We are manufacturer and have our own factory. Welcome to visit us. 3. What is your terms of delivery EXW, FOB, FCA, CFR, CIF. 4. Do you provide samples Yes, we could offer the sample for free charge but do not pay the cost of freight. 5. Do you test all your goods before delivery Yes, we have 100% test before delivery and can provide COA.
Plastic flip top cap mould The existing plastic flip cover with an anti-opening protection structure is generally made of polypropylene to ensure the folding performance of the flip hinge. Limited to polypropylene, it has good toughness and can withstand a certain degree of deformation without being damaged. Therefore, most polypropylene anti-opening protection devices can withstand a certain deformation, and the anti-opening protection function is weak, and some consumers can Open the cover when the anti-opening protection structure is destroyed. 1. There is an annular leak-proof ring on the inner wall of the top of the bottle cap; 2. The lower end of the bottle cap is connected to an anti-theft ring through a tensile rib; 3. At the same time, there are a number of sheet-shaped gyroscopic tension wings evenly distributed on the inner wall of the anti-theft ring The bottle cap designed in this way has the characteristics of strong sealing, good leakage resistance and anti-theft performance, safe and convenient use, can effectively prevent the liquid in the bottle from being contaminated by bacteria, and can ensure that various beverage packages meet the national health standards. filp top cap Product Name Plastic flip top cap mould Cavity&Core Stee P20H,718H,2738H,S136,H13 etc. Product Material PP,HDPE,LDPE etc. Mould Base LKM,ISM,HASCO,DME Cavity Single/Multi-cavity Mould life 500,000 ~1million shots runner type cold/hot runner Delivery time 30~60day
A, Cement-based plaster slurry; 1, Improve uniformity, making it easier plaster slurry coating, while increasing anti-sag capability. Enhance mobility and pumpability, thus improving efficiency. 2, High water retention, can extend the working hours of mortar, improve work efficiency, and help to form a mortar in the solidification of high mechanical strength. 3, Control air infiltration, thus eliminating the micro-cracks of the coating, the desired smooth surface is formed. B, Gypsum plaster slurry and plaster products; 1, Improve uniformity, making it easier plaster slurry coating, while increasing anti-sagging liquidity and ability to enhance pumpability. Thereby improving work efficiency. 2, High water retention can extend the working time of mortar and solidification produce a high mechanical strength. 3, By controlling the consistency of mortar uniform, high-quality coating is formed. C, Masonry mortar; 1, Enhanced adhesion and masonry surfaces, and can enhance water retention, improved strength of the mortar. 2, Improve lubricity and plasticity to improve workability, the "security right" brand cellulose ether enhanced mortar and easier application to save time and improve cost efficiency. 3, With particularly high water retention model for highly absorbent tiles. D, Sheet fillers; 1, Excellent water retention, extended cool and set time and improve work efficiency. High lubricity, making administration easier and smoother. 2, Improve resistance to shrinkage and crack resistance, improved surface quality. 3, To provide smooth and uniform texture, and the engaging surface adhesion stronger. E, Tile adhesives; 1, Easy to mix the dry ingredients mixed, no lumps, thus saving work time due to use faster and more efficient, to improve the construction and reduce costs. 2, Cool and set by extending the time and improve the efficiency tiling. Provides excellent adhesion results. 3, Provides a high slip resistance especially developed models. F, Extruded concrete slab; 1, Enhanced workability of extruded products, with high bond strength and lubricity. 2, Improve the wet strength and adhesion after sheet extrusion.
PIR Poly Cyanuric Acid Ester Foam Description "PIR foam or polyisocyanurate foam,is made from base materials of polyisocyanate and polyol,catalyst,fire retardant additive and environmentally friendly foam agent. Polyisocyanurate (PIR) foam is a closed cell regid foam that combines light weight and strengh with exceptional thermal insulating qualities.the material is available as sectional pipe covering,complete with a vapor barrier jacket,as well as sections for fittings and board segments for equipment and tanks." Uses For use on piping,fittings,equipment and tanks operating in the temperature range of -196 to 110,Typical applicatons include: Commercial and industrial pipe and fitting insulati on on chilled water,tank insulation and core material for panel construction (not used in commercial building return air plenums). advantages z 1. High temperature capability: polyisocyanurate foam does not soften or lose its strentgh at elevated temperatures within the recommended use limits. 2. Excellent chemical resistant: most commercial solvents hav e no effect on polyisocyanurate,therefore a wide range of adhesives and coatings are suitable for bonding and finishing this insulation material. 3. Low thermal conductivity: factory pre-curing provides consistent physcial properties. 4. Easy insulation :light weight and easy to install on a variety of surfaces. 5. Good moisture resistance: for both liquid and water vapor. 6. Excellent dimension stability. Packing packing: Carton Storage Store in a cool,dry,frost-free place. Normal storage conditions in up to 25 should provide indefinite shelf life.
Specification Dandelion root extract is usually an herbal mixture that suspends oils derived from undried flowers, leaves, and roots of the dandelion plant in a liquid made of grain alcohol and glycerin. Dandelion extract has been used for generations as a medicine for conditions such as fevers, diarrhea, fluid retention, breast problems and liver diseases. Specification: 1. Flavone 3%, 4%, 8%, 10%, 20% UV 2. Flavonoids 4%, 10% UV 3. Taraxasterols 1%-20% 4. Extract Ratio: 5:1, 10:1 The Benefits of Dandelion Root 1) Liver Damage A few animal-based studies suggest that dandelion root may help protect against liver damage due to carbon tetrachloride. These include a study published in the Journal of Ethnopharmacology in 2010, in which tests on mice demonstrated that treatment with a dandelion root extract may help protect against liver fibrosis due to carbon tetrachloride. A preliminary study published in Food and Chemical Toxicology in 2010 suggests that dandelion root extract may protect against alcohol-induced liver damage. In tests on mice and on cells, laboratory experiments demonstrated that a water-based dandelion root extract shows promise in protecting against alcohol-induced liver toxicity by boosting antioxidant activity. 2) Cancer Preliminary research suggests that dandelion root may show promise as an anti-cancer agent. dandelion root extract may combat pancreatic cancer by inducing apoptosis (a type of programmed cell death essential for stopping the proliferation of cancer cells). slowed the growth of pancreatic cancer cells and stopped the spread of prostate cancer cells. However, neither dandelion flower extract nor dandelion root extract had any effect on either type of cancer cell.
PRODUCT SPECIFICATION for FAT FILLED MILK POWDER & GENERAL INFORMATION Description Product is a composition of various dairy and vegetable products blended to adjust fat and protein content to meet customers specific requirements Origin Poland Specifications The product conforms with all applicable Polish and European Union standards and regulations and is produced in compliance with requirements of HACCP System SPECIFICATIONS High Protein Low Protein Applications Applications Yoghurts, chocolate, ice cream, desserts, biscuits, confectionery, coffee and tea whiteners, bakery and pastry Recombined liquid milk, milk drinks, milk shakes, coffee and tea whiteners, biscuits, desserts, confectionery, bakery and pastry Protein* (%) 20 - 26 Protein* (%) 8 - 18 Fat (%) min. 26 max. 28 Fat (%) min. 26 max. 28 Moisture (%) max. 4.0 Moisture (%) max. 4.0 Ash (%) max. 8.0 Ash (%) max. 8.0 pH min. 6.0 pH min. 6.0 Lactose (%) +/- 1 approx. 38 Lactose (%) +/- 1 approx. 38 Purity (disc) A, A/B Purity (disc) A, A/B Insolubility 1.0 ml max. Insolubility 1.0 ml max. Color White to yellowish Color White to yellowish Flavor Typical milky Flavor Typical milky Texture Free flowing, free of lumps Texture Free flowing, free of lumps Taste Typical milky Taste Typical milky MICROBIOLOGICAL SPECIFICATIONS Total plate count/g 20,000 Coliforms 0.1 g absent E. coli 0.1 g absent Salmonella 25/g absent Antibiotics absent Yeast & Mould /g max. 100 STORAGE, SHELF LIFE AND PACKING SPECIFICATION Packing Four-layer paper bag with polythene inner bag, 25 kg net Shelf Life 24 month shelf life in the original packaging Storage Product must be stored in a cool, dry place, at ambient temperature and relative humidity below 80%
Health benefits of refined coconut oil Prevent wrinkles, sagging skin, skin dryness, and flaking Reduces protein loss in hair and nourishes the hair Treats pancreatitis and Alzheimer's disease Prevent and effectively cures candida improve bone health Helps in easy digestion Strengthens immune system Prevents diseases affecting liver and kidney Effective in healing damaged tissues and infections Rich in lauric acid that helps maintain blood sugar and cholesterol levels SPECIFICATIONS: I. PHYSICAL CHARACTERS- VISUAL CHECKING Appear: Liquid, transparent, Homogeneous at 30oC, no impurities Ingredients: 100% coconut oil Color: Light yellow, natural color of product) Taste and flavor: Typical of coconut oil, no stranger flavor Foreign material: Not detected II. CHEMICAL STANDARD NO. ITEMS UNIT STANDARD 1 Free fatty acid (as lauric acid) % â?¤ 0,1 2 Peroxide value Meq/kg 4 3 Iodine Value g/100g 104 Moisture and volatile matter content % 0,1 5 Impurities % 0.05 6 Color 5,25 inch Lovibond cell 0,7 R/7,0 Y7 Saponification Value mgKOH/g 241-265 8 Slip melting point oC 23-26 9 Arsenic(AS) Mg/kg 0,1 10 Lead(Pb) Mg/kg 0,1 III, MICROBIOLOGICAL STANDARD NO. ITEMS UNIT STANDARD 1 Total aerobic plate count CFU/g
Quick DetailsPlace of Origin:Zhejiang,China (Mainland)Brand Name:OEMModel Number:PT-10HType:High Pressure GunApplication:Paint Spray GunCup Volume:10L/Qt, 2.65 Gal.Max working pressure:43.5 psi (3 bar)Air hose connection:1/4" NPTLiquid hose connection:3/8" NPTPaint tank/pot:10L/Qt manual/hand mixing air pressure quality paint/pot tank PT-10HPackaging & DeliveryPackaging Details:Sea worthy cartonDelivery Time: Shipped in 7 days after paymentProduct DescriptionProduct ApplicationBig capacity tank perfect for big area spraying such as wall, floor, assembly line, garages, body shop, ship yard etc.10L/Qt, 2.65 Gal. manual/hand stir HVLP air pressure quality paint pot PT-10HMax Operating Pressure43.5 psi (3 bar)Paint Capacity10 Liter/Qt,2.65 Gal.Air hose connection1/4"Liquid hose connection3/8"Stir typemanual/handInner tankS.S inner tankMain Features1)� Complete with paint tank(10 lier)/qt,2.65 Gal., manual stirring pole, paint exit tube, air pressure gauge, air regulator, safety valve, pressure release valve, fluid outlet valve(2pcs), air inelt&outlet, S.S inner tank air hose, paint hose(avaiable with longer ones) and 4 castors.2) Actuated by manual/hand3) One -piece format seamless steel body4) S.S inner is easy to replace the paint5) Large lid clasp&gasket makes good sealing and stability during operating6) Air safety valve and pressure regulator. for safety7) Mounted on castors for easy manoeuvrability8) Carry hook, paint strirrer and assembly spanner includedDetailed ImagesOur ServicePacking & Delivery