Technical Parameters Travel of X and Y Axes: 1200x1500 mm; Maximum cutting thickness: 1000 mm; Maximum Work piece weight: 3500 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1300x1900x1000 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 4200x3600x2300 mm; Approx. Machine weight: 10000 kg; Approx. Machine control cabinet size: 1200x800x800 mm; Approx. Machine control cabinet weight: 150 kg.
Technical Parameters Travel of X and Y Axes: 1000x1200 mm; Maximum cutting thickness: Standard: 800 (Can be adjustable) mm; Maximum Work piece weight: 2000 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1010Ã??1500 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 100 square mm/min; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 1.2 KVA; Approx. Machine size (LxWxH): 3100x2500x2300 mm; Approx. Machine weight: 5000 kg; Approx. Machine control cabinet size: 1200x800x800 mm; Approx. Machine control cabinet weight: 150 kg.
Technical Parameters Travel of X and Y Axes: 630x800 mm; Maximum cutting thickness: 600/800 mm; Maximum Work piece weight: 1000 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 680x1080x600 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 2265x1865x1980 mm; Approx. Machine weight: 3500 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg.
DK7745 Technical Parameters Travel of X and Y Axes: 450x550 mm; Maximum cutting thickness: 460 mm; Maximum Work piece weight: 750 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 500x750x460 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1865x1350x1900 mm; Approx. Machine weight: 1250 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg.
Technical Parameters Travel of X and Y Axes: 400x500 mm; Maximum cutting thickness: 460 mm; Maximum Work piece weight: 450 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 460x690x460 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1600x1240x1400 mm; Approx. Machine weight: 1250 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg.
Technical Parameters Travel of X and Y Axes: 350x450 mm; Maximum cutting thickness: 460 mm; Maximum Work piece weight: 300 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 400x650x460 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1200x1170x1400 mm; Approx. Machine weight: 1440 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg.
Technical Parameters Travel of X and Y Axes: 320x400mm; Maximum cutting thickness: 400 mm; Maximum Work piece weight: 300 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 360x610x400mm; Surface Roughness /Ra: Ra less than 2.5u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function; Total machine power: 1.8KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001mm; Pulse width adjustable range: 15-150us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1200x1170x1400mm; Approx. Machine weight: 1150kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80kg.
1. Material: Type of fabric used (e.g., 100% cotton, polyester blend) 2. Fit: Description of the fit (e.g., slim fit, relaxed fit, oversized) 3. Style: Type of T-shirt (e.g., crew neck, V-neck, graphic tee) 4. Color: Description of the color(s) used 5. Design: Description of the design or graphic printed on the T-shirt 6. Size: List of available sizes 7. Features: Any additional features (e.g., pocket, hood, zipper) 8. Care instructions: How to wash and dry the T-shirt 9. Fabric weight: Weight of the fabric (e.g., lightweight, heavyweight) 10. Seasonality: Whether the T-shirt is suitable for a specific season or occasion 11. Target audience: Who the T-shirt is designed for (e.g., men, women, children) 12. Quality features: Any quality features (e.g., high-quality print, soft fabric) 13. Unique selling points: What sets the T-shirt apart from others Example: - Men's Slim Fit Graphic T-Shirt - Material: 100% cotton - Fit: Slim fit - Style: Crew neck graphic tee - Color: Black with white graphic - Design: Unique graphic design on the front and back - Size: XS-XXXL - Features: Soft fabric, high-quality print - Care instructions: Machine wash cold, tumble dry low - Fabric weight: Lightweight - Seasonality: Suitable for spring and summer - Target audience: Men who love graphic tees - Quality features: Soft fabric, high-quality print - Unique selling points: Unique graphic design, slim fit style"
1.CPU: Intel Gemini lake N4120 Quad-core 1.1-2.6Ghz, GPU:UHD Graphics 600; Intel Alder Lake N100 1.8Ghz Turbo 3.2Ghz is optional, 2.Operation System: Windows10 home OS; 3.Display & Touch Screen: 8 inch Capacitive Multi-touch IPS screen,FHD 1200*1920 Pixels,280cd/m2; 4.Two Cameras: Front 2.0M camera, Back 5.0M Camera; 5.Memory & Storage: 8GBram DDR + 128GB EMMC; 6. Wireless Network: 802.11 ac/b/g/n 2.4G+5Ghz wifi and Blutooth4.0; 7.Battery: Built-in 3.7V/4000mAh Lithium Battery, 8.I/O Ports:1*RJ45 100M/1000M Ethernet Port,1*USB3.0 Host,1*Type-C USB port,1*DC,1*TF Slot, 1*earphone jack, 1*Sim Card Slot For 4G Module(optional), 9.Rugged Durability: Waterproof and dustproof rate: IP67 design; Ruggedness: comply with MIL-STD-810G. 10.Navigation & Mapping: support GPS+Beidou, 11.NFC:13.56MHz, Compliant with ISO/IEC14443A/B/15693,etc.; 12.2D Barcode Scanner: Newland EM3596, is optional, press Volume- button >=2s to active scanning function; 13.Handbelt: is optional; 14.Docking Station: 1*DC port+4*USB host, is optional; 15.4G LTE module: is optional; 16.Dimension: 222*147*22mm.
Technical specifications Configuration 4-cycle, vertical, water cooled diesel engine Number of cylinders 3 Bore and stroke mm (in.) 82 x 70 (3.23 x 2.76) Displacement cc (cu. in.) 1019 (68) Maximum output hp(kW)/rpm at crankshaft 40hp/4500rpm (29.41kW/4500rpm) Combustion system Direct injection Starting system Electric with emergency rope start Cooling system Direct seawater cooling by rubber impeller pump Lubrication system Forced lubrication with trochoid pump Generator AC dynamo built in flywheel Drive device Clutch type Dog type clutch Reduction ratio Ahead/Astern 1.846/1.846 Direction of rotation Clockwise viewed from propeller Lubrication system Oil bath Tilt up system AX-E manual AX-EP hydraulic Control device Engine speed control Remote control Clutch control Remote control Steering Remote control Transom installation Through bolts with nuts Fuel oil Diesel fuel with kerosene (Add lube oil, 30:1) Fuel oil capacity l(cu.in) 24 (1465)
Technical specifications Configuration 4-cycle, vertical, water cooled diesel engine Number of cylinders 3 Bore and stroke mm (in.) 82 x 70 (3.23 x 2.76) Displacement cc (cu. in.) 1019 (68) Maximum output hp(kW)/rpm at crankshaft 36hp/4500rpm (26.5kW/4500rpm) Combustion system Direct injection Starting system Electric with emergency rope start Cooling system Direct seawater cooling by rubber impeller pump Lubrication system Forced lubrication with trochoid pump Generator AC dynamo built in flywheel Drive device Clutch type Dog type clutch Reduction ratio Ahead/Astern 1.846/1.846 Direction of rotation Clockwise viewed from propeller Lubrication system Oil bath Tilt up system AX-E manual AX-EP hydraulic Control device Engine speed control Remote control Clutch control Remote control Steering Remote control Transom installation Through bolts with nuts Fuel oil Diesel fuel with kerosene (Add lube oil, 30:1) Fuel oil capacity l(cu.in) 24 (1465)
Technical specifications Configuration 4-cycle, vertical, water cooled diesel engine Number of cylinders 3 Bore and stroke mm (in.) 70 x 70 (2.76 x 2.76) Displacement cc (cu. in.) 808 (49) Maximum output hp(kW)/rpm at crankshaft 27hp/4500rpm (19.9kW/4500rpm) Combustion system Direct injection Starting system Electric with emergency rope start Cooling system Direct seawater cooling by rubber impeller pump Lubrication system Forced lubrication with trochoid pump Generator AC dynamo built in flywheel Drive device Clutch type Dog type clutch Reduction ratio Ahead/Astern 1.846/1.846 Direction of rotation Clockwise viewed from propeller Lubrication system Oil bath Tilt up system AX-E manual AX-EP hydraulic Control device Engine speed control Remote control Clutch control Remote control Steering Remote control Transom installation Through bolts with nuts Fuel oil Diesel fuel with kerosene (Add lube oil, 30:1) Fuel oil capacity l(cu.in) 24 (1465)
Technical Parameters Travel of X and Y Axes: 800x1200 mm; Maximum cutting thickness/ Maximum height of the part: 700 mm; Maximum Work piece weight: 1000 kg; Wire diameter: Standard 0.18 mm mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 985x1580 mm; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " . Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; No. of axes: 4 axes (X,Y,U,V) Maximum cutting speed: 160 square mm/min; Numerical Control System: X8 ; Motor power: 2.5 KW; Maximum processing current: 7 A; Maximum power consumption: less than 1 KVA; Minimum feed increment: 0.001 mm; Adjustable range of pulse width: 15-150 �¼s; Approx. Machine size (LxWxH): 2600x2400x1800 mm; Approx. Machine weight: 4500 kg; Approx. Machine control cabinet size: 670x630x1800 mm; Approx. Machine control cabinet weight: 200 kg; Operating system/CNC system/Software drawing system: X8 system is a total integrated system that includes CNC system, Operating system and Software drawing system. ; Menu language: Chinese and English ; The units of measurement does the system use: Metric ; Data port: USB port, RS 232C port, Ethernet port ; Operating room temperature: Normally is 5-40 , we suggest 10-20 â??. ;
Technical Parameters : Travel of X and Y Axes: 500x630 mm; Maximum cutting thickness/ Maximum height of the part: 600 mm; Maximum Work piece weight: 700 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 600x860x600 mm; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " . Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; No. of axes: 4 axes (X,Y,U,V) Maximum cutting speed: 150 square mm/min; Numerical Control System: X8 ; Motor power: 2.5 KW; Maximum processing current: 7 A; Maximum power consumption: less than 1 KVA; Minimum feed increment: 0.001 mm; Adjustable range of pulse width: 15-150; Approx. Machine size (LxWxH): 2000x1950x1750 mm; Approx. Machine weight: 2540 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg; Operating system/CNC system/Software drawing system: X8 system is a total integrated system that includes CNC system, Operating system and Software drawing system. ; Menu language: Chinese and English ; The units of measurement does the system use: Metric ; Data port: USB port, RS 232C port, Ethernet port ; Operating room temperature: Normally is 5-40 , we suggest 10-20 ;
AVITA Magus 12.2" 2-in-1 Touch Screen Notebook/Laptop Detachable Keyboard (N4020/4/64GB eMMC/W10H) 2-in-1 detachable design MAGUS is both a recreational gadget and the best partner in the office. The 2-in-1 comes vivid color line-up with a 12.2â?? 1920x1200 IPS touch screen that offers ultra-wide viewing angle. With a keyboard cover, the MAGUS 12.2" 2-in-1 transforms from a tablet into a laptop by simply opening the built-in stand, enabling users to stay productive with ease anytime, anywhere. Inside-out Vibrancy MAGUS combines minimalistic design with a metallic casing. Be it in tablet form or laptop mode. Accommodate daily work and entertainment needs MAGUS can run a variety of Windows applications with battery life up to eight hours. It has a microSDXC card reader built in, equipped with a 3.5mm audio jack, HDMI port and a USB 3.0 interface, taking care of the users' needs in every way possible. Brand Series: Avita Magus Part: NS12T5MYC42B Processor: Intel Celeron N4020 Memory: 4GB LP DDR4 2400 MHZ Storage: 64GB eMMC Operating System: Win Home 10 Graphic: Intel UHD 600 Graphic Display: 12.2" FHD TFT 1920* 1200 IPS. Capacitive Touch Panel. (P+G). Video Output 1080P Camera: 2.0MP (Front Only. No rear camera) Wifi/Bluetooth: Yes/4.0 I/O Ports: 1 x USB 3.0 Type A HDMI: 1 x Full Size Card Slot: 1 x micro SD (max 256GB) Headphone: 1 x 3.5mm Finger Print: No Keyboard: Detachable Ethernet Jack: No Dimension (mm): 299(W) x 206(H) x 22(D) Weight (kgs): 1.396 (keyboard weight 0.3535kgs) Warranty: 12 Months (Local)
Technical Parameters : Travel of X and Y Axes: 800x630 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1130x9500x300 mm; Maximum Work piece weight: 750 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 2200x1650x1910 mm; Approx. Machine weight: 2980 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters: Travel of X and Y Axes: 630x500 mm; Maximum cutting thickness: 350 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 m mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1020x640x350 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 2180 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters Travel of X and Y Axes: 500x400 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 850x540x300 mm; Maximum Work piece weight: 450 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 1790 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters Travel of X and Y Axes: 400x320 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 620x480x300 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1700x1300x2160 mm; Approx. Machine weight: 1480 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters : Travel of X and Y Axes: 800x630 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1130x9500x300 mm; Maximum Work piece weight: 750 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 2200x1650x1910 mm; Approx. Machine weight: 3000 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
