AC Input Microwave Motion Sensor - Highbay Version AC Input Microwave Motion Sensors Microwave Motion Sensors AC Input HNS203HB 5.8GHz C-band microwave motion sensor, tri-level dimming control. Operating voltage: 120~277V AC, 50/60Hz. Rated load: 400W @ 120VAC, (capacitive) Features 5.8GHz C-band microwave motion sensor, tri-level dimming control. Operating voltage: 120~277V AC, 50/60Hz. Rated load: 400W @ 120VAC, (capacitive) 800W @ 200~277VAC, (capacitive) Stand-by power: ?1w. Dual-PD technology, real Da ylight mo nitoring function for built-in application. Zero-cross point operation, protect the sensor relay against the in-rush current, secure the max. load and life time of the relay . Detection range up to 18m in diameter. Mounting height: 10~12m. Operation temperature:-20+70 RoHS compliant. IP rating: IP20. Setting Detection range Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application. Hold-time Hold-time means the time period to keep the lamp on 100% after motion detected. *when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off. Daylight sensor Daylight sensor means the daylight threshold to enable or disable the sensor function. "Disable": The sensor works always, even during daylight. "50lux": The sensor works only in twilight. "10lux, 2lux": The sensor works only in the dark. Stand-by period This is the time period that the lamp remains at a low light level before it is completely switched off in the long absence of people. "+" : means bi-level dimming control, the fixture never switch off. Stand-by dimming level This is the dimmed low light level you would like to have after the hold-time in the absence of people. *0% means on/off control. 10%--Vdim=1.5Vdc 30%--Vdim=3.0Vdc50%--Vdim=5.0Vdc -
5V/12V DC Input Microwave Motion Sensor Highbay Version DC Input Motion Sensor Module Highbay DC Input Motion Sensor HNS111HB 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. Features 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. 0~10V DC output signal Super compact, flexible to be integrated into any suitable fixtures. Dual ï¹£ PD technology, real Daylight monitoring function for built-in application. IR remote commissioning, easy setting and user friendly. Detection range up to 18m in diameter. Mounting height: 10~12m. Operation temperature: -20 ~ +70 RoHS compliant. Settings(Remote control IR12) Permanent ON/OFF function Press ON/OFF button, fixture goes to permanent on or permanent off mode, sensor is disabled. *press "Auto" ,"Reset" or "Ambient learn" to quit this mode. Dim +/- Press "Dim" button to automatically dim up or down the light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved. *after desired brightness is locked down, if user wants to dim again reversely, just press the Dim button again and then lock down the new brightness again. Sensor mode Press "Auto" button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off. Reset function Press "Reset" button, all settings go back to factory default settings. Factory default settings Sensitivity=100% Daylight sensor=disable Hold time=90s Twilight time=5min Twilight level=10% Ambient learn Press "Ambient learn" button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance. Test mode "Test mode" is for testing purpose only, for users to check the functionality and choose the desired detection range. The sensor goes to test mode automatically after pressing this button. Users can quit this mode by pressing "ON/OFF", "Reset' or any button of "Hold time". The sensor settings are changed accordingly. *Test mode defaulted settings Daylight sensor=disable Hold time=3s Twilight time=N/A Twilight level=N/A In this mode, when used for on/off control, after motion detected, sensor enters into a cycle of 3s on and 2s off. In this mode, when used for tri-level dimming control, after motion detected, sensor enters into a cycle of 3s on and 2s off(0.5s soft off + 1.5s off). -
AC Input Microwave Motion Sensor - Highbay Version AC Input Microwave Motion Sensors Microwave Motion Sensors AC Input HNS203HB 5.8GHz C-band microwave motion sensor, tri-level dimming control. Operating voltage: 120~277V AC, 50/60Hz. Rated load: 400W @ 120VAC, (capacitive) Features 5.8GHz C-band microwave motion sensor, tri-level dimming control. Operating voltage: 120~277V AC, 50/60Hz. Rated load: 400W @ 120VAC, (capacitive) 800W @ 200~277VAC, (capacitive) Stand-by power: 1w. Dual-PD technology, real Daylight monitoring function for built-in application. Zero-cross point operation, protect the sensor relay against the in-rush current, secure the max. load and life time of the relay . Detection range up to 18m in diameter. Mounting height: 10~12m. Operation temperature:-20??+70?? RoHS compliant. IP rating: IP20. Setting Detection range Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application. Hold-time Hold-time means the time period to keep the lamp on 100% after motion detected. *when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off. Daylight sensor Daylight sensor means the daylight threshold to enable or disable the sensor function. "Disable": The sensor works always, even during daylight. "50lux": The sensor works only in twilight. "10lux, 2lux": The sensor works only in the dark. Stand-by period This is the time period that the lamp remains at a low light level before it is completely switched off in the long absence of people. "+" : means bi-level dimming control, the fixture never switch off. Stand-by dimming level This is the dimmed low light level you would like to have after the hold-time in the absence of people. *0% means on/off control. 10%--Vdim=1.5Vdc 30%--Vdim=3.0Vdc50%--Vdim=5.0Vdc -
5V/12V DC Input Microwave Motion Sensor Highbay Version DC Input Motion Sensor Module Highbay DC Input Motion Sensor HNS111HB 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). Features 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). 0~10V DC output signal Super compact, flexible to be integrated into any suitable fixtures. Dual ï¹£ PD technolo gy, real Daylight monitoring function for built-in application. IR remote commissioning, easy setting and user friendly. Detection range up to 18m in diameter. Mounting height: 10~1 2m. Operation temperatur e: -2 ~ +70 RoHS compliant. Settings(Remote control IR12) Permanent ON/OFF function Press ON/OFF button, fixture goes to permanent on or permanent off mode, sensor is disabled. *press "Auto" ,"Reset" or "Ambient learn" to quit this mode. Dim +/- Press "Dim" button to automatically dim up or down the light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved. *after desired brightness is locked down, if user wants to dim again reversely, just press the Dim button again and then lock down the new brightness again. Sensor mode Press "Auto" button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off. Reset function Press "Reset" button, all settings go back to factory default settings. Factory default settings Sensitivity=100% Daylight sensor=disable Hold time=90s Twilight time=5min Twilight level=10% Ambient learn Press "Ambient learn" button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance. Test mode "Test mode" is for testing purpose only, for users to check the functionality and choose the desired detection range. The sensor goes to test mode automatically after pressing this button. Users can quit this mode by pressing "ON/OFF", "Reset' or any button of "Hold time". The sensor settings are changed accordingly. *Test mode defaulted settings Daylight sensor=disable Hold time=3s Twilight time=N/A Twilight level=N/A In this mode, when used for on/off control, after motion detected, sensor enters into a cycle of 3s on and 2s off. In this mode, when used for tri-level dimming control, after motion detected, sensor enters into a cycle of 3s on and 2s off(0.5s soft off + 1.5s off). -
8 Bands Remote Control RF Jammer for All Cellular, GPS, Lojack, Alarm,CPJP8 Specifications: Effective range: Up to 20meters radius, depending on the strength and type of cellular, GPS tracker, Lojack sytem, car remote control Jammer system; Input Power: Li Battery AC110/220V-DC12/2500mA/h; Antenna: External omni-directional; Operation temperature: 0-50; Humidity: 5%-80%; Size: L 11.9cm X W7.4cm X H29cm; Features: 1. This series cover six or eight frequency bands or with bigger jamming distance. 2. This device utilizes a unique low power radio signal technology that interferes with the communication between wireless handsets and base station. 3. Block all cellular phone, GPS tracker, Lojack sytem, car remote control communication, in you controlled area or to avoid information from being disclosed secretly during meeting, and yet it is jamming silently without user\'s awareness. 4. Easily operated and user-friendly, no hassle installation needed, need no professional knowledge or skill, a DIY designed device to suit everyone, everywhere and anytime. 5. Low Output power will not cause harm to human body or medical equipment 6. Inside fans cool system. 7. Inside rechargeable battery, working 2-3hours by battery. Application: 1. Hospital, medical center or where medical instruments should not be disturbed by cellular signal. 2. theater, cinema, museum and art gallery. 3. conference rooms, offices, libraries, schools and restaurant. Model# CPJ-P8A: Cellular phones+GPS+Wi-Fi+Lojack 1)CDMA&GSM: 850 to960MHz 2)DCS&PCS: 1, 805 to 1990MHz 3)3G: 2, 110 to 2, 170MHz 4)Wi-Fi: 2400 to 2483MHz 5)GPS: 1570-1580MHz (GPSL1) 6)4G WIMAX: 2620-2690 MHz 7)4G LTE: 790-821MHz 8)LOJACK: 160-175MHz CPJ-P8B+ Cellular phones+Wi-Fi+433MHz+315MHz 1)CDMA&GSM: 850 to960MHz 2)DCS&PCS: 1, 805 to 1990MHz 3)3G: 2, 110 to 2, 170MHz 4)Wi-Fi: 2400 to 2483MHz 5)GPS: 1570-1580MHz (GPSL1) 6)4G WIMAX: 2620-2690 MHz 7)4G LTE: 790-821MHz 8)LOJACK: 160-175MHz
1 Quick Details Product Name: PVC One Pack Ca-Zn Stabilizer Product Model:AIMSTA-6800E Main applications: edge banding and small profile Appearance: Powder Package: 25kg in paper bag Storage: in a cool dry place, to avoid sun and rain CasNo:1592-23-0 Certifications: REACH & RoHS HS code :3812399000 Purity:99.00% Payment term: :L/C,T/T , LC at sight or 30% advance & 70% against copy docs Min.Order:1 Metric Ton Origin: China Port: Shenzhen port, China Transportation: By sea ProductionCapacity:100000 Metric Ton/Year 2 Key specifications/special features Non-toxic stabilizer, no harmful chemical. Excellent initial coloring and long-term stability; Both toughening and promoting melting, plasticizing flow is good, no precipitation 3 Product origin PVC resin molding processing into PVC plastic products, must be added to a variety of additives, in order to ensure the smooth molding of products and have excellent performance. Stabilizer is help to keep plastic performance or close to the original performance and material added in the formulation, is to stop or inhibit polymer by outside factors (light/hot/oxygen/mold/bacteria that simple long stored) caused by the damage. 4 Superiority Our Ca-Zn Stabilizer is manufactured according to the advanced concept of environmental protection which is free of lead, Cd, barium, tin, or any other harmful metals. Our Ca-Zn Stabilizer meets the latest European environmental protection standards of REACH & RoHS. 5 Keywords PVC stabilizer , stabilizer, heat stabilizer, chemical additive, plastic additives, pvc heat stabilizer, pvc compound stabilizer Calcium-Zinc stabilizer
The AN87330(F) series high-accuracy power analyzer adopts the latest FPGA+ARM digital processing system to achieve synchronous sampling, which fully meets the testing needs of three-phase equipment in the fields of motors, home appliances, new energy etc. on the market. It is specially designed for production links such as automated line and integrated system etc. Features: High performance, wide frequency band: accuracy up to 0.1%, the bandwidth is DC, 0.5Hz~100kHz, suitable for testing of non-sinusoidal wave load. True differential synchronous conditioning sampling, guaranteeing super large direct test capability, voltage: 0.15~1000V, current: 5mA~50A/1mA~20A. Optional motor torque and speed interface, suitable for testing of three-phase motor mechanical power and energy consumption. Standard RS232, LAN port, standard MODBUS protocol, to meet the customization needs of multiple protocols, optional RS485, GPIB module. Support three-phase interphase angle test. Applications: Dynamic test of brushless DC motor FG signal RMS, peak-peak measurement, duty cycle calculation, wave data analysis. Measurement of RMS and frequency of 3-phase back electromotive force. Phase angle test Power measurement of inverter motor and inverter Power bandwidth DC, 0.5Hz~100kHz Current: 0~20A/current sensor Simultaneously measure input and output power 50th harmonic and distortion analysis Testing of torque/speed of 3-phase motor Support the latest type of motor test module, reserved motor sensor test interface, suitable for signal test of most motor sensor on the market, 3-phase motor efficiency test by single machine, synchronized signal, improved test accuracy.
.Features Qualcomm Atheros QCN9074 5GHz, max 23dBm per chain, up to 4949Mbps Single Band 5GHz 4x4Â WiFi 6 (802.11ax) 4 spatial streams (4SS) M.2 E Key Interface PCI Express 3.0 Interface Supports Dynamic Frequency Selection (DFS) Absolute Maximum Rating Parameter Rating Unit Operating Temperature Range -20 to 70 C Storage Temperature Range -40 to 90 C Operating Humidity Range 5 to +95 (non-condensing) % Storage Humidity Range 0 to +90 (non-condensing) % Hardware Specifications Symbol Parameter Chipset Qualcomm Atheros QCN9074 WLAN Host Interface PCI Express 3.0 Interface System Memory 2Mbit serial IC bus EEPROM Standard Operating Voltage 5V Operating Systems QSDK Host Interface M.2 E Key Antenna Cable / Port 4 x MMCX Connectors,4T4R Frequency Range 5.15GHz-5.95GHz Data Rates for WALN 5GHz, max 23dBm per chain, up to 4949Mbps Channel Spectrum Widths for WLAN Support 20/40/80/160MHz at 5GHz Modulation Techniques OFDMA: BPSK, QPSK, DBPSK, DQPSK,16-QAM, 64-QAM, 256-QAM,1024-QAM, 4096-QAM Temperature Range Operating: -20 C to 70 C, Storage: -40C to 90C Humidity Operating: 5% to 95% (non-condensing), Storage: Max. 90% (non-condensing) Certification TBD Power Consumption TBD Reference Design PN02.1 Dimensions (WxHxD) 57mm x 63mm x 6mm
Display technology :dlp Android systerm :android 5.1 Build-in memory :1g/16g Miracast /airplay:yes Wifi : dual 2.4g/5.8g wifi Bluetooth :bluetooth 4.0 Brightness :800 ansi lumens Resolution :native 1280 x 800, 4k, 2205p supported Contrast :20000:1 Light source :led Lamp life :more than 50000 Image size is 65inches at 0 projection distance Image size is 100inches at 0.23cm projection distance Features of our handhold led dlp smart projector sm4: *supports bluetooth, android and ios mobile phone / tablet, game machine, dvd and other media equipments *with easy wireless screen function, perfectly applied to business office, home theater and intelligent interactive system *2.4g/5.0g dual-band wi-fi makes signal stronger and more stable, rich color saturation with high resolution and brilliant image *dlp technology (from texas instruments) has better colors and rich images *with built-in precise dmd digital lings processing chip and wide color gamut rgb primary colors led, no radiation, no harm to the eyes *native 1280 x 800, 4k 2205p ultra-high clear *support 3d, enjpy home theater *two parts designed, easy for parting and taking, bottom has power bank function for charging *above 50k hours of life, energy-saving design *support airply and miracast Our handhold led dlp smart projector sm500 is suitable for: 1.Presentation tool. Study tool for school students for presentation in class, and also for office meeting, wireless connect The mobile phone, tablet pc, ipad, netbook, pc 2.Home theatre Big screen movie watching, tv, video game playing. 3. Entertainments Travel, camping outside, party in your garden etc entertainments. 4. Holiday season gift promoting
Marine Satellite TV Antenna Model : EMA-V450/ V450L General Description The dependable EMA-V450/V450L auto tracking marine satellite TV systems enable high quality satellite TV watching onboard in all conditions. Features Worldwide satellites database; quick lock signal with built-in GPS Automatic identifier with a superior satellite tracking performance High-performance antenna supported by a high precision gyro with 3-Axis movement. Offsets shocks and waves at high speed traveling for any marine vessel Easy installation and operation Weather proofed Application Supports Dish Diameter : 45cm/17.7 inch Dimension : 600mm(H) x 520mm(D) Weight : 12kg/26lbs Minimum EIRP: 48dBW Reception frequency : Ku-band(10.7~12.75GHz) Local Frequency: 10750,11300,9750/10600MHz(Option) Power Requirement : AC 100V-240V/1.5A Operating Voltage : DC 24V Environment Humidity 0~95% Static Power Consumption: 12W Elevation Range: 0°~90° Temperature: -30â??~70â?? Shipâ??s Motion: Roll±25°,Pitch±15°,Yaw±8°@6 sec period Azimuth Range : 0°~690° Turning Rate : More than 90°/sec RF Output : Dual/Quad Water Ingress : IP56 ACU Dimensions(WxDxH) : 179 x 140 x 54mm Polarization : Linear or Circular
Desktop model with high power radio jamming systemer , remote control gps jammer,CPJX6105UAV New more high power model for 2016 This is one of our the best desktop models with with high power to jamm most of famous brands quadcopters and drones that use 2.4Ghz GPS L1 L2 and advanced long range remote controls on 434MHz, 868Mhz and 912MHz Features: 1.Good cooling system with Heat sink and 3 big on top fans + 2 x small inside, low noise 2.Each frequency band is separate and with adjustable power from Max to OFF(0) 3.100% Safe VSWR over protection (Isolator) for each modular 4.Power supply: AC110 or 220-240V /DC 27V 5.Working time: Without the time limit, may continue to work, 6.Antenna External Omni 500mm long or Directional Patch Panel Antennas Specification: 1.antennas:6pcs external omini-directional antenna 2.Jamming range:up to radius 200-1000meter @ -75dBm depending on the mobile service provider s network condition); 3.Total output power:105Walt 4.Power supply :(1)AC110-240V (2)DC27V 5.Signal source: Synthesized Operation 6.Temperature: -10 to +508.Humidity: 5% to 80% Package information : DeviceSize: 45X23.5X6cm not including antenna Net Weight:10kg Carton Size: /1PCS G.W/CTN:15kg Remote Controls 868, 433, 315, 2.4ghz, GPS L1 L2 : 1 RC 2.4Ghz WIFI 2450-2500MHz 15W3 RC 2.4Ghz WIFI 2450-2500MHz 15W 4 RC 868Mhz and 912Mhz 850-950Mhz 25W 5 RC 433/434Mhz 20W6 GPS L1 1575Mhz 15W 6 GPS L2 1227Mhz 15W
Model: S251 Name: GSM GPRS 3G 4G Power Distribution Monitoring System Keyword: GSM GPRS 3G 4G Power Distribution Monitoring Systems, GSM GPRS 3G 4G power quality monitoring, GSM GPRS 3G 4G Power transmission line monitoring system , GSM 3G Transmission Line Security Monitor, GSM 3G energy monitoring system, GSM 3G Transformer Monitoring, GSM 3G Transformer Oil Monitoringâ??, GSM 3G Transformer Oil Health Monitoring, GSM 3G Transformer oil moisture monitoring, GSM 3G transformer oil level monitoring, gsm 3g Transformer Fire alarm, gsm 3g Remote online transformer monitoring. GSM 3G Power distribution safety monitoring system. The GSM GPRS 3G 4G Power Distribution Monitoring System is not only a smart power meter for measuring the power distributor voltage, current, factor, watts, frequency, active power, reactive power, when over current or exceed the pre-set value, will alarm immediately. The GSM GPRS 3G 4G Power Distribution Monitoring System can be used for monitoring the oil temperature, oil level of the transformers. GSM 3G Wireless Power Line monitoring. The GSM GPRS 3G 4G Power Distribution Monitoring System also can be used as a wireless security alarm system for the transformers, e.g.: theft-proof, fall down, and so on. Model Description S250 GSM GPRS Power Cable Anti-Theft Alarm System S251 GSM 3G Power Distribution Monitoring System Mainly Features: 1.ARM® Cortexâ?¢-M4 32 Bit RISC Core, 72MHz inside, RTOS system; 2.Quad-Band GSM Frequency,3G, supports SMS and Voice and GPRS/3G communication; 3.Programmable by SMS Commands or PC Configurator via USB; 4.A/B/C phase power up it directly, Inbuilt large capacity rechargeable backup battery; 5.Suitable for three-phase four-wire system, input voltage: 100~400V, input current:0~5A; 6.Monitoring A/B/C 3 Phase input over current, over voltage , factor, watts, active power, reactive power exceeds alarm; 7.Power input PT,CT rate are programmable; 8.Accuracy of current, voltage is 0.2 class, power and watts is 0.5 class, sampling is 0.1seond. 9.Large internal memory can save 1000 event historical data; 10.6 analog inputs, 16bits, supports 0-5V, 0-20mA, 4-20mA; 11.2 digital outputs, 5A/30VDC,5A/250VAC, can be program to events or turn on/off by SMS; 12.8 digital inputs, NC/NO/EOL type, when digital input recover can alert by SMS; 13.I/O ports with opto-isolated and lightning protection; 14.Provide one 5VDC@1A power for additional device; 15.Equips LCD to display the real time data and for programming; 16.2 IP data centers, supports GDW 376.1â??2009 protocol over GPRS/3G network; 17.1 RS485 can be used as data transparent transmission for additional intelligent meters or PLC, with 15KV ESD protection; 18.Automatically resend the data while communication failure, GPRS failure will alert by SMS text; 19.8 SMS Alert and auto dial numbers, can program to receive specified alarm message. 20.Automatically report its status to users by the specified time.
Item specifics Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions MPN:HD002Items Included:Does Not ApplyBrand:JILECompatible Brand:Does Not ApplyType:Does Not ApplyCompatible Model:Does Not Apply Size:middleEAN:Does Not ApplyColour:GreenFormat:Does Not ApplyProduct:Does Not ApplyModel:Does Not ApplyDepartment:Personal Care AppliancesPart Type:HD002Item Length:-1ISBN:7.91534E+11Material:Does Not ApplyManufacturer Part Number:HD002Item Width:-1Height: Does Not Apply Features: 100% SAFE LIFELONG HAIR REMOVAL INSTRUMENT With built-in safety sensor chip, the light comes out close to the skin. The integrated design can prevent light leakage and repeated plugging damage, intelligently maintain the motherboard and ensure stable operation. COMFORTABLE AND PAINLESS TREATMENTThe painless IPL optical beauty instrument is skin-friendly. It can be displayed on the LCD screen for 900000 times. It can be used for a lifetime. There are 8 grades for women / men's permanent hair removal. Just press the power button and adjust the grade suitable for you. It has a unique ice compress technology. During use, the skin surface temperature is kept at 0 -5 to ensure no swelling and redness during construction.Easy To Use You can easily remove hair at home, and the LCD screen is also easy to view and use. By increasing skin elasticity, improving blood circulation, tightening skin pores and preventing wrinkles, you can make skin smoother and younger, improve the quality of skin surface and deep layer, and make you healthier.ERGONOMIC DESIGNMultilayer coated lens, wide band coverage, more efficacy. The 1st-3rd gear can remove the color spots and improve the skin quality. The 5th-8th gear is used for hair removal. At the same time, it has a simple appearance and powerful functions. It is easier to carry. The ergonomic appearance design is easy to operate.GIFT WORTH BUYINGWith this device, you no longer need to go to a beauty salon, and the whole family can use it. It's an ideal Christmas gift for yourself, your mother and your girlfriend. You will get lifelong customer service and technical support. You can contact us by email.
Blade type Straight tilt Sanitation blade Operating weight (kg) 18800 19200 Min. Ground clearance (mm) 510 510 Min. Turning radius (mm) 4300 4300 Ground pressure (Mpa) 0.028 0.029 Track gauge (mm) 2170 2170 Max. pulling force (KN) 144 144 Grade ability ( 0 ) 30 30 Blade capacity (m 3 ) 3.9 11.8 Blade dimension (W X H mm) 4150 X 970 4210 X 1688 Max. lift (mm) 1177 1177 Max. depth (mm) 412 412 Max. Tilt adjustment (mm) â?¥ 789 â?¥ 789 Pitch adjustment ( 0 ) 55 55 Capacity (theoretical value-40m: m 3 /h) 255 255 Weight of the blade (kg) 2218 2488 Travel Speed 1 st 2 nd 3 rd Forward (km/h) 3.8 6.6 10.6 Reverse (km/h) 4.9 8.5 13.6 Engine Model WEICHAI WD10G178E25 Engine type 6 cylinders, in-line, water colling, 4-stroke-cycle, turbocharge engine Rated engine speed (rpm) 1850 Horsepower ( HP ) 160 Min. fuel consumption(g/kWh) â?¤215 Piston displacement(l) 9.726 Number-Bore X Stroke(mm) 6-126x130 Maximum torque (N m/rpm) 830/1150 Power Transmission System Torque converter 3-element, 1- stage, 1- phase Transmission Planetary gearing, hand manipulated, hydraulic shift, forced lubrication, 3 forward and 3 reverse speeds Bevel gear Spiral bevel gear, splash lubrication, single-stage speed reduction Steering clutch Wet, multi-disc, spring loaded, hydraulically separated, hydraulic control Steering brake Wet, band type, pedal hydraulic booster, with parking brakes Final drive Double reduction of spur gear, splash lubrication Hydraulic System Pump type Gear pump 07441-67503 Working pressure (Mpa) 13.7 System discharge(L/min) 250 (at engine speed 1850rpm) Working cylinder type Double acting piston pump Working cylinder lift number- Bore x Rod x Stroke (mm) 2-110 x 65 x 1026 Working cylinder tilt Bore x Rod x Stroke (mm) 160 x 70 x 140 Undercarriage System Type Swing type of sprayed beam, suspended structure of equalizer bar Carrier rollers 2 (each side) Track rollers 7 (4-single flange, 3-double flange) Track type Sealed, circular arc, triangular -grouser Number of track shoes 44 (each side) Width of track shoes(mm) 1070 Pith(mm) 203.2 Length of track on ground (mm) 3140 Coolant and Lubrication Fuel tank (L) 320 Hydraulic tank (L) 108 Engine oil 20 Torque converter, transmission, bevel gear, steering clutch (L) 122 Final drive (L) 31 (each side)
Model: S262 S263 Name: GSM GPRS 3G 4G Data Logger Keyword: GSM GPRS 3G 4G data logger manufacturer, GSM GPRS 3G 4G Data logger, GSM 3G 4G Data Acquisition Systems, GSM 3G 4G data logging system, Wireless gsm Temperature-Humidity Chambers monitoring, wireless 3G temperature and humidity meter, wireless GSM temperature and humidity recorder, Wireless GSM humidity and temperature sensor. The GPRS 3G 4G Logger is special for remote monitoring temperature, humidity, current, voltage, fuel level, pressure, air condition parameters and so on, it can setup ultra-highâ??high, lowâ??ultra-low 4 alarm level. and 1 digital relay output can control via free charge call, SMS or GPRS. Also, the internal memory can save the historical for half a year for review. It provides daily report, schedule upload, event upload by the GPRS/3G to monitoring center or by SMS to the user mobile phone directly. Module Comparison Instruction Table Model Application Input Types S260/S260C/S260W Indoor 4 Temp Probe,12bits, measure range :55°C to +125°C (67°F to +257°F), 0.5°C accuracy from 10°C to +85°C. S261/S261C/S261W Outdoor S262/S262C/S262W Indoor 4Analog Input,12bits,compatiable with 0~20mA, 4~20mA, 0~5V inputs. S263/S263C/S263W Outdoor Notice *GPS Function is optional.ã??*Outdoor model waterproof class is IP67. *C stands for inbuilt module is CDMA2000. *W stands for inbuilt module is WCDMA. Mainly Features: 1.Quad-Band GSM Frequency,3G, supports SMS and Voice and GPRS/3G communication; 2.Programmable by SMS Commands or PC Configurator via USB; 3.2 alternate Server via GPRS/3G wireless network, supports IP address and DNS; 4.Compatible with KingCenter CMS-02 via GPRS(Google map), and CMS-01 through SMS; 5.GPS module is optional, measure the Longitude,Latitude,Speed,Direction ; 6.Daily report, schedule upload, event upload; 7.6 authorized phone numbers, each number can be used to receive SMS or both, also can be used for dial to switch ON/OFF the relay outputs, inquiry status; 8.One digital outputs (dry contact, NO/NC) with relay rating 10A/240VAC for connecting the switch of the air conditioner or machines, the outputs can setup as always ON, Pulse output, by SMS, authorized phone number dial in, and alarm events; 9.4 inputs, 12bits, can setup interval time, interval value, ultra-high, high, low, ultra-low alarm can active the relay outputs and send programmable SMS to authorized phone numbers or via GPRS to monitoring center; 10.Internal memory, can save the historical data for review; 11.External AC Power monitoring, AC On/OFF will send SMS to authorized phone numbers; 12.Rechargeable Backup Battery inside can last 18hours; 13.Standard DIN Rail 35mm installation or outdoor enclosure.
Model: S260 S261 Name: GSM GPRS 3G 4G Temperature Logger Keyword: Wireless GPRS Temperature Monitoring, GSM GPRS 3G 4G SMS Temperature Monitor, 3G 4G Temperature monitoring system, wireless outdoor temperature monitoring system. Temperature SMS alert. wireless temperature sensor, wireless gsm temperature logger. The GSM GPRS 3G 4G Temperature Logger is special for remote monitoring temperature. it can setup ultra-highhigh, lowultra-low 4 alarm level. and 1 digital relay output can control via free charge call, SMS or GPRS. Also, the internal memory can save the historical for half a year for review. It provides daily report, schedule upload, event upload by the GPRS/3G to monitoring center or by SMS to the user mobile phone directly. Module Comparison Instruction Table Model Application Input Types S260/S260C/S260W Indoor 4 Temp Probe,12bits, measure range :55°C to +125°C (67°F to +257°F), 0.5°C accuracy from 10°C to +85°C. S261/S261C/S261W Outdoor S262/S262C/S262W Indoor 4Analog Input,12bits,compatiable with 0~20mA, 4~20mA, 0~5V inputs. S263/S263C/S263W Outdoor Notice *GPS Function is optional.ã??*Outdoor model waterproof class is IP67. *C stands for inbuilt module is CDMA2000. *W stands for inbuilt module is WCDMA. Mainly Features: 1.Quad-Band GSM Frequency,3G, supports SMS and Voice and GPRS/3G communication; 2.Programmable by SMS Commands or PC Configurator via USB; 3.2 alternate Server via GPRS/3G wireless network, supports IP address and DNS; 4.Compatible with KingCenter CMS-02 via GPRS(Google map), and CMS-01 through SMS; 5.GPS module is optional, measure the Longitude,Latitude,Speed,Direction ; 6.Daily report, schedule upload, event upload; 7. authorized phone numbers, each number can be used to receive SMS or both, also can be used for dial to switch ON/OFF the relay outputs, inquiry status; 8.One digital outputs (dry contact, NO/NC) with relay rating 10A/240VAC for connecting the switch of the air conditioner or machines, the outputs can setup as always ON, Pulse output, by SMS, authorized phone number dial in, and alarm events; 9.4 inputs, 12bits, can setup interval time, interval value, ultra-high, high, low, ultra-low alarm can active the relay outputs and send programmable SMS to authorized phone numbers or via GPRS to monitoring center; 10.Internal memory, can save the historical data for review; 11.External AC Power monitoring, AC On/OFF will send SMS to authorized phone numbers; 12.Rechargeable Backup Battery inside can last 18hours; 13.Standard DIN Rail 35mm installation or outdoor enclosure.
9060 for Rotary Bottle UV Printer Rotary Bottle UV Printer Key Words:9060 for Rotary Bottle UV Printer Hanhuang develops, manufactures and markets the most economy and good performance solution in 9060 for Rotary Bottle UV Printer and Wall Printers for many years,which are designed for industrial bulk production with high printing speed, it can print on almost any material like Glass, Wood, Stone, Metal, Plastic, Leather, Ceramic, Acrylic etc. Widely used in promotion items (medals, photo frames, package printing, leather, customized gifts ), signage (home decoration), phone and pad case, t-shirt printing etc. Images on the object surface are dry fast and scratch resistance. Product Description Item name: 9060 for Rotary Bottle UV Printer Product Specification: Print head: TX800 x1PCS Printing method: White/Multicoloured Max printing size:32cm*56cm Printing mode:CMYKWW Printing height:0-10CM Printing precision:360dpi*720dpi*1440dpi Printing Speed:180seconds per A3 image Ink consumption:15ml per square meter Ink system:250ml*6 colors Operation system:win7,win8,win10 Voltage:110-220V 50-60HZ Printing interface:USB2.0 Solidification:LED UV Lamp Net and Gross weight:62kg/84kg Outsize:820*625*430(mm) Packaging size:920*750*620(mm) Warranty:3years,Not included Printing head Usage: Hanhuang 9060 for Rotary Bottle UV Printer are widely used in a variety of industries. 9060 for Rotary Bottle UV Printer can directly printing on the Glass, Wood, Stone, Metal, Plastic, Leather, Ceramic, Acrylic etc. Advertising industry: ABS, Polyurethane, PET, Acrylic, MDF, PVC, etc. for signs, banner, backlight, tags, etc. Leather industry: Authentic leather, fake leather, PU, etc. for shoes, bags, cases, etc. Background wall: Glass, tiles, aluminum, wood, paper, etc. Furniture industry: Wood, glass etc. for cupboard, sofa, doors, etc. Electronic accessories: Mobile phone cases, industrial products cases, etc. Gifts printing: Plastics, USB memory card, Stone, Pens, name card case, glass arms, wrist watch belt, wrist bands, etc. Decoration: Exhibition stand decoration, home decoration, wallpaper, hotel decoration, etc. Industrial printing: membrane switch, touch panel, home appliance printing, etc. Advantages: 1.The 9060 for Rotary Bottle UV Printer can print out the embossing effect. 2.The 9060 for Rotary Bottle UV Printer can print on case of any color. 3.The 9060 for Rotary Bottle UV Printer dry immediately after printing. 4.The 9060 for Rotary Bottle UV Printer can print picture from computer onto flat product directly. Product Photos as attached: Supply Ability:100pcs/month. After-sales Service Provided: 1,Engineers available to service machinery overseas. 2,Free spare parts,Online support,Field maintenance and repair service,Video technical support.
ka/ku multiband feed system, ka/ku band 2 port/4 port tx/rx circular polarization diplexer, extended c band 2 port /4 port diplexer, standard c band 2 port /4 port diplexer, dbs/ x band frequency diplexer, ku/ka band i/l type rotary joint, c band anti 5g interference filters and microwave components, microwave solution (especially in the satellite communication field), including but not limited to: antenna feed horns, ku/ka band isolator, adapters, linear and circular tx/rx feed system, omts, waveguide filters, tracking feed system, and customized products..
Fabric: 100% cotton interlock 180gsm Size:0-3 Month,3-6M,6-9M MOQ 3600PCS
7.3m ring focus telecommunication vsat equipment Characteristics: 1.Conform to the CCIR580-4 standards and INTELSAT access requirements; 2.Ring focus antenna; 3.High gain, Low sidelobe, high G/T value; 4.Hot-dip zinc processed Antenna mount, with strong corrosion resistant ability; 5.Optional C band with 870 MHZ bandwidth; 6.2-ports or 4 ports Linear/Circular feed optional; 7.Automatic feed switching system for Linear and circular polarization; 8.Antenna azimuth ±90 continuous rotation Performance Specification Type:NS-SEC-730 Operating Frequency,GHz C band Rx: 3.625~4.2 C band Tx: 5.85~6.425 Ku Band Rx: 10.95~12.75 Ku Band Tx: 13.75~14.5 Gain, Mid-Band, dBi C band Rx: 48.0 C band Tx: 51.6 Ku Band Rx: 57.5 Ku Band Tx: 58.9 Polarisation C band: Linear or circular Ku Band:Linear XPD(on axis),dB: 35 Axial Ratio(2-port) C band Rx: 1.30 C band Tx: 1.09 Axial Ratio(4-port) C band Rx: 1.06 C band Tx: 1.06 VSWR: 1.25:1 Antenna Noise Temperature 10degree Elevation: C band Rx: 43degree K Ku band Rx: 66degree K 30degree Elevation: C band Rx: 32degree K Ku band Rx: 52degree K 50degree Elevation: C band Rx: 29degree K Ku band Rx: 47degree K G/T(El.>10degree) C band Rx: 29.3dB/degree K(30degree LNA) Ku band Rx: 36.1dB/degree K(70degree LNA) -3dB Beam width,Mid-Band C band Rx: 0.72degree C band Tx: 0.47degree Ku Band Rx: 0.23degree Ku Band Tx: 0.2degree Tx.Power Capacity,KW: C band Tx:5 Ku band Tx:2 Feed interface C band Rx: CPR-229G C band Tx: CPR-137G Ku Band Rx: WR-75 Ku Band Tx: WR-75 Feed Insertion Loss,dB C band Rx: Not more than 0.2 C band Tx: Not more than 0.2 Ku Band Rx: Not more than 0.2 Ku Band Tx: Not more than 0.25 Rx-Rx,Tx-Tx Linear,dB: 30 Tx-Tx,Rx-Rx Circluar,dB:C band:21 Isolation,Tx to Rx,dB: C band:90 Ku band:85 First sidelobe.dB:-14 90% envelop: 29-25 log�¸( �¸ is between 1degree and 20degree) Mechanical Specification Antenna diameter:7.3m Antenna Type:Ring focus Mount type:El.over Az. Surface Accuracy(RMS): not more than 0.5mm Antenna travel range Azimuth travel range:90degree Elevation travel range:0degree to 90degree Polarisation:�±90degree Drive mode:Manual or motorized Azimuth travel speed:0.1degree/S Elevation travel speed:0.1degree/S Polarisation travel speed:1degree/S