Product Description Lithium Battery Rail Impact Wrench Vertical double lithium electric torque wrench (model: U-LD81901) is a railway digital display torque wrench with vertical operation and double lithium electric protection technology, and its working torque is>3000N m. The torque value is adjustable and controllable, which is specially used for various railway bolt operations. The vertical double lithium electric torque wrench (model:LJ - LDB1901) is composed of a control lever, a motor, and a reducer. It adopts the unique ergonomic flat impact principle, which makes the machine more safe, labor-saving, and efficient. Its unique overall waterproof design ensures the all-weather construction needs. Torque regulation and compensation can make torque control more accurate to meet construction requirements. Specification Model LJ-LD81901 Type Battery Impact Wrench Material Stainless Steel Dimensions (L x W x H) (mm) 600*400*250mm Rated voltage (DCV) 18-36 Max. torque 3000 N.m Motor speed (RPM) 0-3000 optional Impact frequency (BPM) 0-5000 optional Battery pack capacity (ah) 18-36 Operating temperature range (-40 ~ 50 ) Torque control adjustable and controllable
NLB-300 Rail Impact Wrench with One Socket NLB-300 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. High power petrol engine ensure large torque and high working efficiency. Specification Model NLB-300 Type Rail Impact Wrench Material Stainless Steel Dimensions (L x W x H) (mm) 1300*510*760mm Main shaft rpm 780r/min Max. loosen torque 300 Nm Max. fasten torque 150 Nm Working efficiency 10 pieces/min Petrol engine 1) Model: GX160 (2) Rated power: 4Kw (3) RPM: 3600r/min Weight 60kg
1. Gasoline engine: two-stroke, air-cooled , single-cylinder 2. Power: 5.9kw 3. Grinding wheel: double reinforced wire mesh 4. Maximum linear velocity: 100m /s 5. Rated R.M.P : 5100 ± 100r / min 6. Grinding wheel size: 350 25.4 T 3.8 / 4.2mm 7. Cutting accuracy: a. Vertical deviation between incision and longitudinal direction of the rail: 0.40mm b. Plane deviation between bidirectional cutting interface: 0.35mm 8. Cutting depth: 125mm 9. Cutting time: 120s ( for 60kg/m rail) 10. Machine weight: 28kg 11. Fuel tank capacity: 1.25L 12. Overall size: 850 480 500mm
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM â?¥4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description Magnetic Rail Versine Measuring Kits is also called string box for railway curve measurement. It is a necessary tool for railway works construction. Curve positive vector measuring box is a regular work in rail line maintenance. In order to facilitate the work of the workeProduct Description NQG5.1 Rail Cutting Machine To furnish the varying desires of our customers, we are immersed in offering a world class consignment of Abrasive Rail Cutter. Abrasive Rail Cutter is suitable for cutting upto 60 Kg. 110 uts Rails. the machine has features of fast cutting speed, high utilization rate of cutting discs, high quality of cutting profile, convenient operation, easy motion and safe use. the machine comprises of petrol driven engine, integrated with a cutting unit fitted with an abrasive disc. Specification Model NQG-5.1 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 800*560*500mm Engine GX270 petrol engine 5.1KW Specification of cutting disc �?400*�?32 *4mm Cutting disc no. of revolutions 3320 r/min Linear speed of cutting disc 70m/s Cutting accuracy Verticality0. 4mm, flatness0.3mm Cutting time 2 min ( cut off 60kg/m rail) Weight 50kgr to complete this job, a new line curve positive vector measuring box has been development. Feature Curve versine measuring box is a fine production, it is portable, pocket, and good looking. The box body resistant ABS material for yellow, and easy to operate. Specification Model ZSH-50 Type Versine Measuring Device Material Plastic Dimensions (L x W x H) (mm) 133*66*26mm Measuring Range 50m Weight 210kg
Product Description The Battery powered rail cutting machine has passed the strict verification of protection grade, and supports the work in rainy and snowy weather; Professional lithium battery platform for ultra long endurance operation; The equipment can be used normally under extreme conditions such as high cold and high altitude; The lithium battery has passed the safety test conducted by the national authority. Specification Voltage 72V Power 5KW Cutting time
Product Description Rail Web Width Measuring Device is a kind of measuring instrument for measuring the rail web width. Specification Model LJ-GK-A Type Rail Wed Gauge Material Stainless Steel Measure range 0-120mm Accuracy 0.01mm
Product Description Versine Measuring Device For easy checking and determination of versines in track track curves . It can be used for all common rail profiles, Magnet type . Benefits Curve versine measuring box, is also called string box for railway curve measurement. It is a necessary tool for railway works construction. Curve positive vector measuring box is a regular work in rail line maintenance. In order to facilitate the work of the worker to complete this job, a new line curve positive vector measuring box has been development. Feature Curve versine measuring box is a fine production, it is portable, pocket, and good looking. The box body resistant ABS material for yellow, and easy to operate. Specification Model ZSH-20 Type Versine Measuring Device Material Aluminum Dimensions (L x W x H) (mm) 100*20*50mm Measure range 20M Weight 157G
Product Description Magnetic Rail Versine Measuring Kits is also called string box for railway curve measurement. It is a necessary tool for railway works construction. Curve positive vector measuring box is a regular work in rail line maintenance. In order to facilitate the work of the worker to complete this job, a new line curve positive vector measuring box has been development. Feature Curve versine measuring box is a fine production, it is portable, pocket, and good looking. The box body resistant ABS material for yellow, and easy to operate. Specification Model ZSH-50 Type Versine Measuring Device Material Plastic Dimensions (L x W x H) (mm) 133*66*26mm Measuring Range 50m Weight 210kg
Product Description Magnetic Pointer Rail Thermometer Magnetic Pointer Rail Thermometer is used to measure the temperature of rail. rail thermometer is not only dedicated to measure the temperature of the railway rails, but also can measure the air temperature and the surface temperature of other objects. Specification Model JGGW-II Type Rail Temperature Thermometer Material Plastic Dimensions (L x W x H) (mm) 10*8*3cm Temperature measuring range -40~+70 Division value 1.0 Accuracy level 1.0
Product Description Mechanical Rail Wear Gauge is mainly used to measure the vertical wear and lateral wear of the rail. The reasonable design makes it convenient operation and intuitive reading. Feature Analogue Rail Wear Gauge is easy to operate,high reliability,small volume,light weight etc. Specification Model LJ-GM-B Vertical wear measure range 0-15mm Lateral wear measure range 0-25mm Score value 0.1mm Supply Customize UIC60/60E1, UIC54 /54E1, 115RE 68TR ect all profiles Block customize block for gauge
Product Description Digital corrugation Wear Gauge is a direct reading measuring tool which is used straight vertical measurement method.It is mainly used for measuring rail top surface and side surface corrugation wear value BENEFITS Its simple in operation, compact in size, easy to carry, high precision in measurement, reliable in installation and positioning, simple in use Convenient;Easy to site construction, ensure the quality of work Specification Model LJ-BM-A(mm) Horizontal measure range 1000 Vertical measure range -8 - +25 Accuracy 0.05 Resolution 0.01 Repeat error 0.02 Working temperature -5 - 40
Product Description Switch Rail Height Gauge is mainly used to measure the descent height value of the switch rail relative to the basic rail and point rail relative to the wing rail . This instrument has the features of high measuring precision, convenient calibration, simple structure, light weight and easy to carry. Reasonable switch rail height can not only ensure train running safely and smoothly, but also reduce the interaction between wheel and rail effectively,reduce the dynamic stress of track structure, keep the track in good geometric state, thus reduce the maintenance workload FEATURE 1. Smart and Portable The size of the horizontal rod is about 300mm, and the vertical rod is about 250mm. The ruler body is smart and portable. 2. LCD Digital display, easy to read. 3. High Accuracy The measurement accuracy can reaches 0.01mm.The measurement results can be display instantly 4. Multifuncional, Wide range of application . It can measure five items to meet different requirements: 1) The descent height value of the switch rail 2) The descent height value of the point rail 3) The height of check rail 4) The height of switch roller 5. This device is equipped with a simple calibrator ,could be used for quick calibration before each use 6. The measure head could be moved from side to side,suitable for all kinds distance tracks. Measure head could move range is 60mm,could be used for measuring different distance switch rail and point rail. 7. Replaceable measuring probe, suitable for different usage When measuring the height of the switch rail and point rail relative running rail, using the flat measuring probe; When measuring the rail surface dent, using the sharp measuring probe. 8. Metric /Imperial unit Specification Model LJ-JGJD-I Type Switch Rail Gauge Material Stainless Steel Dimensions (L x W x H) (mm) 270*22*180mm Measure range -5~30mm Accuracy 0.05mm Resolution 0.01mm Working humidity 93%RH Size 270*22*180mm Weight 0.45kg Power Button battery(1.5V)
Product Description Digital Rail Head Wear Gauge is is mainly used to measure the vertical wear and lateral wear of the rail.The reasonable design makes it light,convenient operation and intuitive reading. FEATURE 1. Digital type with direct readings: LCD display screen, clear and readable; No calculations required,gives direct reading ; When reading, hold down the HOLD button to fix the measurement value and facilitate reading. 2. High measuring accuracy : The measurement accuracy is 0.01m 3. Easy to use, measure the vertical and lateral rail wear at the same time, Position the rail wear gauge on the outer side of the rail . Push the vertical and lateral rail wear gauge so that the measuring probe is in contact with the upper surface and inner side of the rail respectively.Then the vertical and lateral wear of the rail can be read. 4. Metric /imperial unit 5. Support customize: We could customize all kinds wear gauge according to different rail profiles and different measure points. 6.Fast calibrate: One-key zero clearing function, can be quickly calibrated before each use to reach the factory measurement accuracy. 7. Magnetic fixed part: Strong magnetic fixed part to attach to the rail. 8. Rail fillet as measuring base to ensure measure data more accuracy Rail fillet is more clear than rail bottom,no dust. It could ensure the measure result reliability. 9. Portable Handle : This product is designed with a handle that is easy to hold, which greatly improves the portability of the product. It can avoid touching the ruler body directly, cause the ruler body to be stained and corroded, improve the product service life. SPECIFICATION Model LJ-GM-A Center vertical wear measure range 0-15mm Lateral wear measure range 0-25mm Score value 0.1mm Indication error 0. 15mm Supply Customize UIC60/60E1, UIC54 /54E1, 115RE 68TR ect all profiles Block customize block for gauge
Product Description Digital Rail Frog Wear Gauge is used to measure vertical wear value of frog point rail and wing rail at any sections.Also could be used for measuring decrease value of point rail relative to wing rail. SPECIFICATION Model LJ-ZCM-A Type Digital Rail Frog Wear Gauge Material Stainless Steel Dimensions (L x W x H) (mm) 380*166*25mm Measure range 0~40mm Score value 0.01mm Indication error 0. 15mm Working tempareture -10~+40 Main ruler measure range 0~380mm
PRODUCT DESCRIPTION Analogue track gauge is used for measuring the railway track gauge,check rail gauge, back to back distance,super-elevation. It is Suitbale for railway speed not greater than 160km/h.Traditional compass is more easier for rail workers to accept and operate.Light weight structure is convenient to carry. FEATURE Analogue track gauge has the advantages of affordable price,simple operate and easy calibrate. SPECIFICATION Model(1435mm) TGC-W-II 1435 Track gauge(mm) 1410-1470 Check Rail Gauge(mm) 1381-1401 Back to back distance(mm) 1338-1358 Super-elevation range(mm) -150~+150 Super-elevation resolution(mm) 1 Track gauge resolution(mm) 1 Application rail line railway speed less than 160km/h Model for narrow gauge 600mm 900mm 1067mm Model for broad gauge 1520mm 1600mm 1676mm for choose.
NDG-1 portable tamper is a special small track maintenance machine for tamping ballast uinder sleepers. Because of its light weight, it can be on and off the track at the same time with the operator. Therefore, the interval between trains can be used for ballast tamping. It is suitable for the maintenance and tamping operation of main line and tumout.
This machine is used for the bending operation of railway seam lines and welded joints of seamless tracks and other low-collapsed parts of steel rails. It can also be used as vertical bending and supporting equipment in the laying of seamless tracks; suitable for all types Rails. The machine has simple structure, convenient operation, safe operation and easy maintenance. It is an effective tool for rectifying rail joint problems.
YD-22III Smart rail tamping machine unit is a renewal product developed by our factory with new material and new technology. It has collected the tamping experience of users at home and abroad. It can do tamping works not only on the ballasted track of concrete sleeper type II and III in China, but also on various kinds of concrete sleepers and steel sleepers in foreign countries. This machine is suitable for tamping operation of different types of rails and concrete sleeper line after large and medium repair and sieving operations, and also suitable for tamping operation of ballast on newly built track bed. The equipment has superior performance, reasonable structure, safety and reliability, and high working efficiency. It fully meets the needs of railway ballast tamping operation
This Rail Profile Grinding Machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90�°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding.
